# cloud.common

This collection is a library for the cloud modules. It's the home of the following component:

- ansible_turbo.module: a cache sharing solution to speed up Ansible modules

More content may be included later.

# Requirements

- ansible_turbo.module requires Python 3.6 and Ansible 2.13.0 or greater.

## Ansible Turbo Module

### Current situation

The traditional execution flow of an Ansible module includes
the following steps:

- Upload of a ZIP archive with the module and its dependencies
- Execution of the module, which is just a Python script
- Ansible collects the results once the script is finished

These steps happen for each task of a playbook, and on every host.

Most of the time, the execution of a module is fast enough for
the user. However, sometime the module requires an important
amount of time, just to initialize itself. This is a common
situation with the API based modules. A classic initialization
involves the following steps:

- Load a Python library to access the remote resource (via SDK)
- Open a client
    - Load a bunch of Python modules.
    - Request a new TCP connection.
    - Create a session.
    - Authenticate the client.

All these steps are time consuming and the same operations
will be running again and again.

For instance, here:

- `import openstack`: takes 0.569s
- `client = openstack.connect()`: takes 0.065s
- `client.authorize()`: takes 1.360s

These numbers are from test ran against VexxHost public cloud.

In this case, it's a 2s-ish overhead per task. If the playbook
comes with 10 tasks, the execution time cannot go below 20s.

### How Ansible Turbo Module improve the situation

`AnsibleTurboModule` is actually a class that inherites from
the standard `AnsibleModule` class that your modules probably
already use.
The big difference is that when an module starts, it also spawns
a little Python daemon. If a daemon already exists, it will just
reuse it.
All the module logic is run inside this Python daemon. This means:

- Python modules are actually loaded one time
- Ansible module can reuse an existing authenticated session.

### How can I enable `AnsibleTurboModule`?

If you are a collection maintainer and want to enable `AnsibleTurboModule`, you can
follow these steps.
Your module should inherit from `AnsibleTurboModule`, instead of `AnsibleModule`.

```python

  from ansible_module.turbo.module import AnsibleTurboModule as AnsibleModule

```

You can also use the `functools.lru_cache()` decorator to ask Python to cache
the result of an operation, like a network session creation.

Finally, if some of the dependeded libraries are large, it may be nice
to defer your module imports, and do the loading AFTER the
`AnsibleTurboModule` instance creation.

### Example

The Ansible module is slightly different while using AnsibleTurboModule.
Here are some examples with OpenStack and VMware.

These examples use `functools.lru_cache` that is the Python core since 3.3.
`lru_cache()` decorator will managed the cache. It uses the function parameters
as unicity criteria.

- Integration with OpenStack Collection: https://github.com/goneri/ansible-collections-openstack/commit/53ce9860bb84eeab49a46f7a30e3c9588d53e367
- Integration with VMware Collection: https://github.com/goneri/vmware/commit/d1c02b93cbf899fde3a4665e6bcb4d7531f683a3
- Integration with Kubernetes Collection: https://github.com/ansible-collections/kubernetes.core/pull/68

### Demo

In this demo, we run one playbook that do several `os_keypair`
calls. For the first time, we run the regular Ansible module.
The second time, we run the same playbook, but with the modified
version.


[![asciicast](https://asciinema.org/a/329481.png)](https://asciinema.org/a/329481)


### The background service

The daemon kills itself after 15s, and communication are done
through an Unix socket.
It runs in one single process and uses `asyncio` internally.
Consequently you can use the `async` keyword in your Ansible module.
This will be handy if you interact with a lot of remote systems
at the same time.

### Security impact

`ansible_module.turbo` open an Unix socket to interact with the background service.
We use this service to open the connection toward the different target systems.

This is similar to what SSH does with the sockets.

Keep in mind that:

- All the modules can access the same cache. Soon an isolation will be done at the collection level (https://github.com/ansible-collections/cloud.common/pull/17)
- A task can loaded a different version of a library and impact the next tasks.
- If the same user runs two `ansible-playbook` at the same time, they will have access to the same cache.

When a module stores a session in a cache, it's a good idea to use a hash of the authentication information to identify the session.

.. note:: You may want to isolate your Ansible environemt in a container, in this case you can consider https://github.com/ansible/ansible-builder

### Error management

`ansible_module.turbo` uses exception to communicate a result back to the module.

- `EmbeddedModuleFailure` is raised when `json_fail()` is called.
- `EmbeddedModuleSuccess` is raised in case of success and return the result to the origin module processthe origin.

Thse exceptions are defined in `ansible_collections.cloud.common.plugins.module_utils.turbo.exceptions`.
You can raise `EmbeddedModuleFailure` exception yourself, for instance from a module in `module_utils`.

Be careful with the catch all exception (`except Exception:`). Not only they are bad practice, but also may interface with this mechanism.

### Troubleshooting

You may want to manually start the server. This can be done with the following command:

.. code-block:: shell

  PYTHONPATH=$HOME/.ansible/collections python -m ansible_collections.cloud.common.plugins.module_utils.turbo.server --socket-path $HOME/.ansible/tmp/turbo_mode.foo.bar.socket

Replace `foo.bar` with the name of the collection.

You can use the `--help` argument to get a list of the optional parameters.


## More information

<!-- List out where the user can find additional information, such as working group meeting times, slack/IRC channels, or documentation for the product this collection automates. At a minimum, link to: -->

- [Ansible Collection overview](https://github.com/ansible-collections/overview)
- [Ansible User guide](https://docs.ansible.com/ansible/latest/user_guide/index.html)
- [Ansible Developer guide](https://docs.ansible.com/ansible/latest/dev_guide/index.html)
- [Ansible Collections Checklist](https://github.com/ansible-collections/overview/blob/master/collection_requirements.rst)
- [The Bullhorn (the Ansible Contributor newsletter)](https://us19.campaign-archive.com/home/?u=56d874e027110e35dea0e03c1&id=d6635f5420)
- [Changes impacting Contributors](https://github.com/ansible-collections/overview/issues/45)


## Release notes

See [CHANGELOG.rst](https://github.com/ansible-collections/cloud.common/blob/main/CHANGELOG.rst).

## Testing, Releasing, Versioning and Deprecation

This collection is tested using GitHub Actions. To know more about CI, refer to [CI.md](https://github.com/ansible-collections/cloud.common/blob/main/CI.md).

This collection follows [Semantic Versioning](https://semver.org/). More details on versioning can be found [in the Ansible docs](https://docs.ansible.com/ansible/latest/dev_guide/developing_collections.html#collection-versions).

We plan to regularly release new minor or bugfix versions once new features or bugfixes have been implemented.

Releasing happens by tagging the `main` branch.

## Contributing to this collection

We welcome community contributions to this collection. If you find problems, please open an issue or create a PR against the [Cloud.Common collection repository](https://github.com/ansible-collections/cloud.common).

## Code of Conduct

We follow [Ansible Code of Conduct](https://docs.ansible.com/ansible/latest/community/code_of_conduct.html) in all our interactions within this project.

If you encounter abusive behavior violating the [Ansible Code of Conduct](https://docs.ansible.com/ansible/latest/community/code_of_conduct.html), please refer to the [policy violations](https://docs.ansible.com/ansible/latest/community/code_of_conduct.html#policy-violations) section of the Code of Conduct for information on how to raise a complaint.

## Licensing

<!-- Include the appropriate license information here and a pointer to the full licensing details. If the collection contains modules migrated from the ansible/ansible repo, you must use the same license that existed in the ansible/ansible repo. See the GNU license example below. -->

GNU General Public License v3.0 or later.

See [LICENSE](https://www.gnu.org/licenses/gpl-3.0.txt) to see the full text.

The files in plugins/module_utils and plugins/plugin_utils directories are also licensed with a BSD license.
