.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.76,INET-ADDRESS-MIB::inetAddressMIB,,,,,,This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4001, see the RFC itself for full legal notices.
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.14525,TRAPEZE-NETWORKS-ROOT-MIB::trpzRootMib,,,,,,Trapeze Networks Root MIB
.1.3.6.1.4.1.14525.1,TRAPEZE-NETWORKS-ROOT-MIB::trpzProducts,,,,,,
.1.3.6.1.4.1.14525.2,TRAPEZE-NETWORKS-ROOT-MIB::trpzTemporary,,,,,,
.1.3.6.1.4.1.14525.2.1,TRAPEZE-NETWORKS-TRAP-MIB::trpzDeviceId,OBJECT,accessible-for-notify,,current,,Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.2,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainIp,IpAddress,accessible-for-notify,,current,,IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.3,TRAPEZE-NETWORKS-TRAP-MIB::trpzAPMACAddress,OCTET,accessible-for-notify,,current,,MAC address of the AP of interest. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.4,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientMACAddress,OCTET,accessible-for-notify,,current,,MAC address of the client of interest. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.5,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectXmtrMacAddr,OCTET,accessible-for-notify,,current,,Describes the transmitter's MAC address. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.6,TRAPEZE-NETWORKS-TRAP-MIB::trpzPortNum,INTEGER,accessible-for-notify,,current,,Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.7,TRAPEZE-NETWORKS-TRAP-MIB::trpzAPRadioNum,INTEGER,accessible-for-notify,,current,radio-1(1):radio-2(2):not-applicable(3),Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.8,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioRssi,INTEGER,accessible-for-notify,,obsolete,,The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification.
.1.3.6.1.4.1.14525.2.9,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioBSSID,OCTET,accessible-for-notify,,current,,The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.10,TRAPEZE-NETWORKS-TRAP-MIB::trpzUserName,OCTET,accessible-for-notify,,current,,The client user name as learned from the AAA process. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.11,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthServerIp,IpAddress,accessible-for-notify,,current,,The client authentication server ip address. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.12,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientSessionState,INTEGER,accessible-for-notify,,current,associated(1):authorizing(2):authorized(3):active(4):de-associated(5):roaming-away(6):updated-to-roam(7):wired(8):clearing(9):invalid(10):web-authing(11),The state for a client session. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.13,TRAPEZE-NETWORKS-TRAP-MIB::trpzDAPNum,INTEGER,accessible-for-notify,,current,,The DAP number on the wireless switch. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.14,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIp,IpAddress,accessible-for-notify,,obsolete,,The client ip address. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.15,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientSessionId,OCTET,accessible-for-notify,,current,,The unique global id for a client session. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.16,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthenProtocolType,INTEGER,accessible-for-notify,,current,none(1):eap-tls(2):eap-ttls(3):md5(4):peap(5):leap(6):pass-through(7),The authentication protocol for a client. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.17,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientVLANName,OCTET,accessible-for-notify,,current,,The vlan name a client is on. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.18,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientSessionStartTime,TimeTicks,accessible-for-notify,,obsolete,,The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often *cannot* be implemented to match the declared semantics: a client session might have been created on another wireless switch, *before* the current switch booted (the local zero of sysUptime).
.1.3.6.1.4.1.14525.2.19,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientFailureCause,OCTET,accessible-for-notify,,current,,Display string for possible failure cause for a client session. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.20,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromPortNum,INTEGER,accessible-for-notify,,obsolete,,The port number on the AC a client has roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromPhysPortNum'.
.1.3.6.1.4.1.14525.2.21,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromRadioNum,INTEGER,accessible-for-notify,,obsolete,radio-1(1):radio-2(2):not-applicable(3),The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromRadioIndex'.
.1.3.6.1.4.1.14525.2.22,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromDAPNum,INTEGER,accessible-for-notify,,obsolete,,The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromApNum'.
.1.3.6.1.4.1.14525.2.23,TRAPEZE-NETWORKS-TRAP-MIB::trpzUserParams,OCTET,accessible-for-notify,,current,,A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.24,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientLocationPolicyIndex,INTEGER,accessible-for-notify,,current,,Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.25,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAssociationFailureCause,INTEGER,accessible-for-notify,,current,other(1):load-balance(2):quiet-period(3):dot1x(4):no-prev-assoc(5):glare(6):cipher-rejected(7):cipher-mismatch(8):wep-not-configured(9):bad-assoc-request(10):out-of-memory(11):tkip-cm-active(12):roam-in-progress(13),The client association failure cause. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.26,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthenticationFailureCause,INTEGER,accessible-for-notify,,current,other(1):user-glob-mismatch(2):user-does-not-exist(3):invalid-password(4):server-timeout(5):signature-failed(6):local-certificate-error(7):all-servers-down(8):authentication-type-mismatch(9):server-rejected(10):fallthru-auth-misconfig(11):no-lastresort-auth(12):exceeded-max-attempts(13):password-expired(14),The client authentication failure cause. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.27,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationFailureCause,INTEGER,accessible-for-notify,,current,other(1):user-param(2):location-policy(3):vlan-tunnel-failure(4):ssid-mismatch(5):acl-mismatch(6):timeofday-mismatch(7):crypto-type-mismatch(8):mobility-profile-mismatch(9):start-date-mismatch(10):end-date-mismatch(11):svr-type-mismatch(12):ssid-defaults(13):qos-profile-mismatch(14):simultaneous-logins(15),The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.28,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientFailureCauseDescription,OCTET,accessible-for-notify,,current,,Display string for describing the client failure cause. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.29,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromWsIp,IpAddress,accessible-for-notify,,obsolete,,The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.30,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromAccessType,INTEGER,accessible-for-notify,,obsolete,ap(1):dap(2):wired(3),The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoleted by 'trpzClientRoamedFromAccessMode'.
.1.3.6.1.4.1.14525.2.31,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAccessType,INTEGER,accessible-for-notify,,current,ap(1):dap(2):wired(3),The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use trpzClientAccessMode instead of this object.
.1.3.6.1.4.1.14525.2.32,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioMACAddress,OCTET,accessible-for-notify,,current,,AP Radio MAC address. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.33,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioPowerChangeReason,INTEGER,accessible-for-notify,,current,dup-pkts-threshold-exceed(1):retransmit-threshold-exceed(2):clients-optimal-performance-reached(3):def-power-threshold-exceed(4),The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.34,TRAPEZE-NETWORKS-TRAP-MIB::trpzNewChannelNum,INTEGER,accessible-for-notify,,current,,New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.35,TRAPEZE-NETWORKS-TRAP-MIB::trpzOldChannelNum,INTEGER,accessible-for-notify,,current,,Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.36,TRAPEZE-NETWORKS-TRAP-MIB::trpzChannelChangeReason,INTEGER,accessible-for-notify,,current,util-index(1):rexmit-pkt-offset(2):noise-offset(3):noise(4):utilization(5):phy-error-offset(6):crc-errors-offset(7):radar-detected(8),The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.37,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectListenerListInfo,OCTET,accessible-for-notify,,current,,The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.38,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioSSID,OCTET,accessible-for-notify,,current,,The radio SSID string This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.39,TRAPEZE-NETWORKS-TRAP-MIB::trpzNewPowerLevel,Unsigned32,accessible-for-notify,,current,,New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.40,TRAPEZE-NETWORKS-TRAP-MIB::trpzOldPowerLevel,Unsigned32,accessible-for-notify,,current,,Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.41,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioPowerChangeDescription,OCTET,accessible-for-notify,,current,,The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.42,TRAPEZE-NETWORKS-TRAP-MIB::trpzCounterMeasurePerformerListInfo,OCTET,accessible-for-notify,,obsolete,,A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification.
.1.3.6.1.4.1.14525.2.43,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDot1xState,INTEGER,accessible-for-notify,,current,initialize(1):disconnected(2):connecting(3):authenticating(4):authenticated(5):wired(6):aborting(7):held(8),The state for a client 802.1X. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.44,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDot1xFailureCause,INTEGER,accessible-for-notify,,current,other(1):quiet-period(2):administrative-kill(3):bad-rsnie(4):timeout(5):max-sessions-exceeded(6):fourway-hs-failure(7):user-glob-mismatch(8):bonded-auth-failure(9):reauth-disabled(10):gkhs-failure(11):force-unauth-configured(12):cert-not-installed(13),The client 802.1X failure cause. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.45,TRAPEZE-NETWORKS-TRAP-MIB::trpzAPAccessType,INTEGER,accessible-for-notify,,obsolete,ap(1):dap(2):wired(3),The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification.
.1.3.6.1.4.1.14525.2.46,TRAPEZE-NETWORKS-TRAP-MIB::trpzUserAccessType,INTEGER,accessible-for-notify,,current,mac(1):web(2):dot1x(3):last-resort(4):profile(5),The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.47,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientSessionElapsedTime,TimeTicks,accessible-for-notify,,obsolete,,The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.48,TRAPEZE-NETWORKS-TRAP-MIB::trpzLocalId,INTEGER,accessible-for-notify,,current,,Local Id for the session. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.49,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectDoSType,INTEGER,accessible-for-notify,,current,probe-flood(1):auth-flood(2):null-data-flood(3):mgmt-6-flood(4):mgmt-7-flood(5):mgmt-d-flood(6):mgmt-e-flood(7):mgmt-f-flood(8):fakeap-ssid(9):fakeap-bssid(10):bcast-deauth(11):null-probe-resp(12):disassoc-spoof(13):deauth-spoof(14):decrypt-err(15):weak-wep-iv(16):wireless-bridge(17):netstumbler(18):wellenreiter(19):adhoc-client-frame(20):associate-pkt-flood(21):re-associate-pkt-flood(22):de-associate-pkt-flood(23):bssid-spoof(24),The type of denial of service (DoS) attack. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.50,TRAPEZE-NETWORKS-TRAP-MIB::trpzSourceWsIp,IpAddress,accessible-for-notify,,current,,IP address of another AC (wireless switch). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.51,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientVLANid,INTEGER,accessible-for-notify,,current,,VLAN ID used by client traffic. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.52,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientVLANtag,INTEGER,accessible-for-notify,,current,,VLAN tag used by client traffic. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.53,TRAPEZE-NETWORKS-TRAP-MIB::trpzDeviceModel,OCTET,accessible-for-notify,,current,,The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.54,TRAPEZE-NETWORKS-TRAP-MIB::trpzDeviceSerNum,OCTET,accessible-for-notify,,current,,The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.55,TRAPEZE-NETWORKS-TRAP-MIB::trpzRsaPubKeyFingerPrint,OCTET,accessible-for-notify,,current,,The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.56,TRAPEZE-NETWORKS-TRAP-MIB::trpzDAPconnectWarningType,INTEGER,accessible-for-notify,,current,not-configured-fingerprint-connect(1):secure-handshake-failure(2):not-configured-fingerprint-required(3):fingerprint-mismatch(4),The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.57,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientMACAddress2,OCTET,accessible-for-notify,,current,,MAC address of the second client of interest. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.58,TRAPEZE-NETWORKS-TRAP-MIB::trpzApAttachType,INTEGER,accessible-for-notify,,current,directAttach(1):networkAttach(2),How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.59,TRAPEZE-NETWORKS-TRAP-MIB::trpzApPortOrDapNum,Unsigned32,accessible-for-notify,,obsolete,,The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by trpzApNum. (In 6.0, direct- and network-attached APs were unified.)
.1.3.6.1.4.1.14525.2.60,TRAPEZE-NETWORKS-TRAP-MIB::trpzApName,OCTET,accessible-for-notify,,current,,The name of the AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.61,TRAPEZE-NETWORKS-TRAP-MIB::trpzApTransition,INTEGER,accessible-for-notify,,current,clear(1):timeout(2):reset(3):bootSuccess(4):startConfiguring(5):connectFail(6):setBackupConn(10):startHandoverReconfiguring(11):connLost(20):connRestored(21):connOutageExtendedTimeout(22),AP state Transition, as seen by the AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.62,TRAPEZE-NETWORKS-TRAP-MIB::trpzApFailDetail,INTEGER,accessible-for-notify,,current,secureHandshakeFailure(2):fingerprintRequired(3):fingerprintMismatch(4):portLinkUp(11):portLinkDown(12):normalTransition(91):adminRequest(92):failUnknown(99),Detailed failure code for some of the transitions specified in 'trpzApTransition' object. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.63,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioType,INTEGER,accessible-for-notify,,current,typeUnknown(1):typeA(2):typeB(3):typeG(4):typeNA(5):typeNG(6),Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.64,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioConfigState,INTEGER,accessible-for-notify,,current,configInit(1):configFail(2):configOk(3),Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.65,TRAPEZE-NETWORKS-TRAP-MIB::trpzApConnectSecurityType,INTEGER,accessible-for-notify,,current,secure(1):insecure(2):auto(3),Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.66,TRAPEZE-NETWORKS-TRAP-MIB::trpzApServiceAvailability,INTEGER,accessible-for-notify,,current,fullService(1):noService(2):degradedService(3),Indicates the level of wireless service availability. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.67,TRAPEZE-NETWORKS-TRAP-MIB::trpzApWasOperational,INTEGER,accessible-for-notify,,current,oper(1):nonOper(2),Indicates whether the AP was operational before a transition occurred. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.68,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientTimeSinceLastRoam,Unsigned32,accessible-for-notify,,current,,The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.69,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIpAddrChangeReason,INTEGER,accessible-for-notify,,current,client-connected-ipv4(1):other(2):dhcp-to-static(3):ipv6-global-addr(10),Indicates the reason why client IP address changed. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.70,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectRogueAPMacAddr,OCTET,accessible-for-notify,,current,,Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.71,TRAPEZE-NETWORKS-TRAP-MIB::trpzBlacklistingRemainingTime,Unsigned32,accessible-for-notify,,current,,The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.72,TRAPEZE-NETWORKS-TRAP-MIB::trpzBlacklistingCause,INTEGER,accessible-for-notify,,current,bl-configured(1):bl-associate-pkt-flood(2):bl-re-associate-pkt-flood(3):bl-de-associate-pkt-flood(4),Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.73,TRAPEZE-NETWORKS-TRAP-MIB::trpzNumLicensedActiveAPs,Unsigned32,accessible-for-notify,,current,,Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.74,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDynAuthorClientIp,IpAddress,accessible-for-notify,,current,,The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.75,TRAPEZE-NETWORKS-TRAP-MIB::trpzChangedUserParamOldValues,OCTET,accessible-for-notify,,current,,A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.76,TRAPEZE-NETWORKS-TRAP-MIB::trpzChangedUserParamNewValues,OCTET,accessible-for-notify,,current,,A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.77,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDisconnectSource,INTEGER,accessible-for-notify,,current,other(1):admin-disconnect(2):dyn-auth-disconnect(3),The external source that initiated the termination of a session. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.78,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDisconnectDescription,OCTET,accessible-for-notify,,current,,Display string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.79,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainSecondarySeedIp,IpAddress,accessible-for-notify,,current,,The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.80,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainPrimarySeedIp,IpAddress,accessible-for-notify,,current,,The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.81,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectClassificationReason,INTEGER,accessible-for-notify,,current,other(1):default-classification(2):rogue-list(3):ap-in-modo(4):neighbor-list(5):ssid-masquerade(6):seen-in-network(7):ad-hoc(8):ssid-list(9):pass-fingerprint(10):fail-fingerprint(11),Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.82,TRAPEZE-NETWORKS-TRAP-MIB::trpzConfigSaveFileName,OCTET,accessible-for-notify,,current,,Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.83,TRAPEZE-NETWORKS-TRAP-MIB::trpzConfigSaveInitiatorType,INTEGER,accessible-for-notify,,current,other(1):cli-console(2):cli-remote(3):https(4):snmp-set(5),Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.84,TRAPEZE-NETWORKS-TRAP-MIB::trpzConfigSaveInitiatorIp,IpAddress,accessible-for-notify,,current,,The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.85,TRAPEZE-NETWORKS-TRAP-MIB::trpzConfigSaveInitiatorDetails,OCTET,accessible-for-notify,,current,,Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.86,TRAPEZE-NETWORKS-TRAP-MIB::trpzConfigSaveGeneration,Counter32,accessible-for-notify,,current,,Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. RingMaster). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.87,TRAPEZE-NETWORKS-TRAP-MIB::trpzApNum,Unsigned32,accessible-for-notify,,current,,The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes trpzApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified.
.1.3.6.1.4.1.14525.2.88,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioMode,INTEGER,accessible-for-notify,,current,enabled(1):disabled(2):sentry(3),Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.89,TRAPEZE-NETWORKS-TRAP-MIB::trpzMichaelMICFailureCause,INTEGER,accessible-for-notify,,current,detected-by-ap(1):detected-by-client(2),Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.90,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAccessMode,INTEGER,accessible-for-notify,,current,other(1):ap(2):wired(3),The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace trpzClientAccessType. (In 6.0, direct- and network-attached APs were unified.)
.1.3.6.1.4.1.14525.2.91,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationReason,INTEGER,accessible-for-notify,,current,other(1):new-client(2):re-auth(3):roam(4),Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.92,TRAPEZE-NETWORKS-TRAP-MIB::trpzPhysPortNum,Unsigned32,accessible-for-notify,,current,,Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when trpzClientAccessMode = 'ap'). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.93,TRAPEZE-NETWORKS-TRAP-MIB::trpzApMgrOldIp,IpAddress,accessible-for-notify,,current,,The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.94,TRAPEZE-NETWORKS-TRAP-MIB::trpzApMgrNewIp,IpAddress,accessible-for-notify,,current,,The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.95,TRAPEZE-NETWORKS-TRAP-MIB::trpzApMgrChangeReason,INTEGER,accessible-for-notify,,current,other(1):failover(2):load-balancing(3),Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.96,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientClearedReason,INTEGER,accessible-for-notify,,current,other(1):normal(2):backup-failure(3),Indicates the reason why client was cleared. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.97,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainResiliencyStatus,INTEGER,accessible-for-notify,,current,other(1):resilient(2):degraded(3),Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.98,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientSessionElapsedSeconds,Unsigned32,accessible-for-notify,,current,,Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.99,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioChannelWidth,INTEGER,accessible-for-notify,,current,channelWidth20MHz(1):channelWidth40MHz(2),Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.100,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioMimoState,INTEGER,accessible-for-notify,,current,mimoOther(1):mimo1x1(2):mimo2x3(3):mimo3x3(4),Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.101,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRadioType,INTEGER,accessible-for-notify,,current,typeUnknown(1):typeA(2):typeB(3):typeG(4):typeNA(5):typeNG(6),Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.102,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectXmtrRadioType,INTEGER,accessible-for-notify,,current,typeUnknown(1):typeA(2):typeB(3):typeG(4):typeNA(5):typeNG(6),Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.103,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectXmtrCryptoType,INTEGER,accessible-for-notify,,current,other(1):clear(2):wep(3):wep40(4):wep104(5):tkip(6):aesCcmp(7):sms4(8),Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.104,TRAPEZE-NETWORKS-TRAP-MIB::trpzClusterFailureReason,INTEGER,accessible-for-notify,,current,other(1):validation-error(2),Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.105,TRAPEZE-NETWORKS-TRAP-MIB::trpzClusterFailureDescription,OCTET,accessible-for-notify,,current,,Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.106,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCommunicationServerID,OCTET,accessible-for-notify,,current,,The multimedia communication server ID. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.107,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaLocalStationIp,IpAddress,accessible-for-notify,,current,,The local multimedia station IP address. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.108,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaLocalStationPort,Unsigned32,accessible-for-notify,,current,,The local multimedia station UDP port. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.109,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaLocalStationEndpointID,OCTET,accessible-for-notify,,current,,The local multimedia station endpoint ID. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.110,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaRemoteStationIp,IpAddress,accessible-for-notify,,current,,The remote multimedia station IP address. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.111,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaRemoteStationPort,Unsigned32,accessible-for-notify,,current,,The remote multimedia station UDP port. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.112,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaRemoteStationEndpointID,OCTET,accessible-for-notify,,current,,The remote multimedia station endpoint ID. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.113,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaSignalingProtocol,INTEGER,accessible-for-notify,,current,other(1):sip(2),The multimedia signaling protocol that was used for initiating this call (session). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.114,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCallBandwidthAndCodec,OCTET,accessible-for-notify,,current,,Display string providing information about the multimedia call codec and bandwidth. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.115,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCallDataRate,Unsigned32,accessible-for-notify,,current,,The data rate, in Kbps. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.116,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCallRssi,Integer32,accessible-for-notify,,current,,The client RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.117,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCallFailureReason,INTEGER,accessible-for-notify,,current,other(1):resource-unavailable(2),Indicates the reason why the multimedia call has failed. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.118,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCallDirection,INTEGER,accessible-for-notify,,current,incoming(1):outgoing(2),Indicates the multimedia call direction (incoming/outgoing). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.119,TRAPEZE-NETWORKS-TRAP-MIB::trpzApTunnelLimit,Unsigned32,accessible-for-notify,,current,,Indicates the maximum number of tunnels supported for an AP. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.120,TRAPEZE-NETWORKS-TRAP-MIB::trpzWsTunnelLimit,Unsigned32,accessible-for-notify,,current,,Indicates the maximum number of tunnels supported for an AC (wireless switch). This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.121,TRAPEZE-NETWORKS-TRAP-MIB::trpzWsTunnelLimitType,INTEGER,accessible-for-notify,,current,other(1):platform-tunnel-limit(2):ap-ws-tunnel-limit(3),Indicates the type of limit exceeded that caused the AC (wireless switch) to reject a tunnel creation request. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.122,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseSourceID,OCTET,accessible-for-notify,,current,,RF Noise Source ID. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.123,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseSourceType,INTEGER,accessible-for-notify,,current,nsUnknown(0):nsContinuousWave(1):nsVideo(16):nsMicrowaveOven(33):nsPhoneDECT(49):nsPhoneFHSS(50):nsBluetoothAny(64):nsBluetoothHeadset(65):nsBluetoothHandsfree(66),RF Noise Source Type. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.124,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseChannel,Unsigned32,accessible-for-notify,,current,,Channel number. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.125,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseRssi,Integer32,accessible-for-notify,,current,,The noise RSSI (Received Signal Strength Indicator), in decibels referred to 1 milliwatt (dBm). A higher value indicates stronger noise. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.126,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseDutyCycle,Unsigned32,accessible-for-notify,,current,,Estimated Duty Cycle: fraction of time that a noise source is transmitting. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.127,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseChannelInterferenceMeasure,Unsigned32,accessible-for-notify,,current,,Severity of channel interference attributed to a noise source. A higher value indicates more severe interference. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.128,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseAge,Unsigned32,accessible-for-notify,,current,,Age of noise in seconds. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.129,TRAPEZE-NETWORKS-TRAP-MIB::trpzM2UMulticastAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzM2UMulticastAddr'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.130,TRAPEZE-NETWORKS-TRAP-MIB::trpzM2UMulticastAddr,OCTET,accessible-for-notify,,current,,The multicast address for which conversion to unicast is performed. The type of this address is specified in 'trpzM2UMulticastAddrType'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.131,TRAPEZE-NETWORKS-TRAP-MIB::trpzM2UConvNotPossibleReason,INTEGER,accessible-for-notify,,current,other(1):max-conv-limit(2),Indicates the reason why multicast to unicast conversion cannot be performed on an AP with this feature enabled. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.132,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadioBand,INTEGER,accessible-for-notify,,current,bandAN(1):bandBGN(2),Indicates the radio band used in an auto-tune operation. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.133,TRAPEZE-NETWORKS-TRAP-MIB::trpzRadiosTunedCount,Unsigned32,accessible-for-notify,,current,,Indicates how many radios had their operational characteristics changed as a result of an auto-tune process. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.134,TRAPEZE-NETWORKS-TRAP-MIB::trpzAutoTuneFailureReason,INTEGER,accessible-for-notify,,current,other(1):ap-conn-lost(2):ws-conn-lost(3),Indicates the reason why an auto-tune operation failed to complete. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.135,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthServerAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzClientAuthServerAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.136,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthServerAddr,OCTET,accessible-for-notify,,current,,The Internet address of the client authentication server. The type of this address is specified in 'trpzClientAuthServerAddrType'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.137,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromWsAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzClientRoamedFromWsAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.138,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromWsAddr,OCTET,accessible-for-notify,,current,,The system IP address of the AC (wireless switch) a client roamed from. The type of this address is specified in 'trpzClientRoamedFromWsAddrType'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.139,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDynAuthorClientAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzClientDynAuthorClientAddr'. Only the value 'ipv4(1)' is reported as of release 8.0. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.140,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDynAuthorClientAddr,OCTET,accessible-for-notify,,current,,The dynamic authorization client IP address which caused the change of authorization. The type of this address is specified in 'trpzClientDynAuthorClientAddrType'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.141,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIpAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzClientIpAddr'. Only the values 'ipv4(1)' and 'ipv6(2)' are reported. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.142,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIpAddr,OCTET,accessible-for-notify,,current,,Indicates an IP address of the client. The type of this address is specified in 'trpzClientIpAddrType'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.143,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIPv4Addr,OCTET,accessible-for-notify,,current,,The IPv4 address of the client. If the client does not use the IPv4 stack, or its IPv4 address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.144,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIPv6LinkLocalAddr,OCTET,accessible-for-notify,,current,,The IPv6 link-local address of the client. If the client does not use the IPv6 stack, or its IPv6 link-local address has not yet been detected, then all octets will have the value 0. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.145,TRAPEZE-NETWORKS-TRAP-MIB::trpzApRadioIndex,Unsigned32,accessible-for-notify,,current,,AP Radio index. Intended to replace 'trpzAPRadioNum'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.146,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromAccessMode,INTEGER,accessible-for-notify,,current,other(1):ap(2):wired(3),The client access mode (ap, wired) that a client roamed from. This object is used within notifications and is not accessible. Obsoletes 'trpzClientRoamedFromAccessType'. (In 6.0, direct- and network-attached APs were unified.)
.1.3.6.1.4.1.14525.2.147,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromApNum,Unsigned32,accessible-for-notify,,current,,The number of the AP the client roamed from. Obsoletes 'trpzClientRoamedFromDAPNum'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.148,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromRadioIndex,Unsigned32,accessible-for-notify,,current,,The index of the AP Radio the client roamed from. Obsoletes 'trpzClientRoamedFromRadioNum'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.149,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamedFromPhysPortNum,Unsigned32,accessible-for-notify,,current,,Identifies the physical port on the AC used by the wired-auth client, before roam. Zero means the port is unknown or not applicable (for example, when trpzClientRoamedFromAccessMode = 'ap'). Obsoletes 'trpzClientRoamedFromPortNum'. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.150,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceType,OCTET,accessible-for-notify,,current,,The type of the client device. Is a zero length string if unknown. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.151,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceTypeOld,OCTET,accessible-for-notify,,current,,The type of the client device, before change. Is a zero length string if unknown. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.152,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceGroup,OCTET,accessible-for-notify,,current,,The group that the detected client device type belongs to. Is a zero length string if the device type is unknown. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.153,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceProfileName,OCTET,accessible-for-notify,,current,,The name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.154,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceProfileNameOld,OCTET,accessible-for-notify,,current,,The name of the device profile associated with the detected client device, before change. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode or if not set. In 'detect-only' mode policy enforcement is disabled. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.2.155,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceProfileChangeReason,INTEGER,accessible-for-notify,,current,other(1):aaa-policy(2):device-type-changed(3),The reason why the device profile changed. This object is used within notifications and is not accessible.
.1.3.6.1.4.1.14525.3,TRAPEZE-NETWORKS-ROOT-MIB::trpzRegistration,,,,,,
.1.3.6.1.4.1.14525.3.1,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange,,,,,,
.1.3.6.1.4.1.14525.3.1.1,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange20,,,,,,
.1.3.6.1.4.1.14525.3.1.2,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange8,,,,,,
.1.3.6.1.4.1.14525.3.1.3,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange400,,,,,,
.1.3.6.1.4.1.14525.3.1.4,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchangeR2,,,,,,
.1.3.6.1.4.1.14525.3.1.6,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange216,,,,,,
.1.3.6.1.4.1.14525.3.1.7,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange200,,,,,,
.1.3.6.1.4.1.14525.3.1.12,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange2800,,,,,,
.1.3.6.1.4.1.14525.3.1.13,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityExchange800,,,,,,
.1.3.6.1.4.1.14525.3.2,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityPoint,,,,,,
.1.3.6.1.4.1.14525.3.2.1,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityPoint101,,,,,,
.1.3.6.1.4.1.14525.3.2.2,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityPoint122,,,,,,
.1.3.6.1.4.1.14525.3.2.3,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityPoint241,,,,,,
.1.3.6.1.4.1.14525.3.2.4,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::mobilityPoint252,,,,,,
.1.3.6.1.4.1.14525.3.3,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::wirelessLANController,,,,,,
.1.3.6.1.4.1.14525.3.3.1,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::wirelessLANController880R,,,,,,
.1.3.6.1.4.1.14525.3.3.2,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::wirelessLANController8,,,,,,
.1.3.6.1.4.1.14525.3.3.3,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::wirelessLANController2,,,,,,
.1.3.6.1.4.1.14525.3.3.4,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::wirelessLANController800r,,,,,,
.1.3.6.1.4.1.14525.3.3.5,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::wirelessLANController2800,,,,,,
.1.3.6.1.4.1.14525.3.4,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChassisComponents,,,,,,
.1.3.6.1.4.1.14525.3.4.1,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompPowerSupplies,,,,,,
.1.3.6.1.4.1.14525.3.4.1.1,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompPowerSupply1,,,,,,
.1.3.6.1.4.1.14525.3.4.1.2,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompPowerSupply2,,,,,,
.1.3.6.1.4.1.14525.3.4.2,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompFans,,,,,,
.1.3.6.1.4.1.14525.3.4.2.1,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompFan1,,,,,,
.1.3.6.1.4.1.14525.3.4.2.2,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompFan2,,,,,,
.1.3.6.1.4.1.14525.3.4.2.3,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzChasCompFan3,,,,,,
.1.3.6.1.4.1.14525.3.5,TRAPEZE-NETWORKS-REGISTRATION-CHASSIS-MIB::trpzRegistrationChassisMib,,,,,,The MIB module for Trapeze Networks wireless switch chassis component OID registrations. These are generic OIDs: they apply to any switch model, if the respective chassis component is present in the switch. Copyright 2007 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.3.6,TRAPEZE-NETWORKS-REGISTRATION-DEVICES-MIB::trpzRegistrationDevicesMib,,,,,,The MIB module for Trapeze Networks wireless device OID registrations. Copyright 2007-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4,TRAPEZE-NETWORKS-ROOT-MIB::trpzMibs,,,,,,
.1.3.6.1.4.1.14525.4.1,TRAPEZE-NETWORKS-TRAP-MIB::trpzTrapMib,,,,,,Notifications emitted by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2004-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.2,TRAPEZE-NETWORKS-BASIC-MIB::trpzBasic,,,,,,Basic objects for Trapeze Networks wireless switches.
.1.3.6.1.4.1.14525.4.2.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzBasicSystemInfo,,,,,,
.1.3.6.1.4.1.14525.4.2.1.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzSerialNumber,OCTET,read-only,,current,,The serial number of the switch.
.1.3.6.1.4.1.14525.4.2.1.2,TRAPEZE-NETWORKS-BASIC-MIB::trpzSwMajorVersionNumber,INTEGER,read-only,,current,,The major release version of the running software.
.1.3.6.1.4.1.14525.4.2.1.3,TRAPEZE-NETWORKS-BASIC-MIB::trpzSwMinorVersionNumber,INTEGER,read-only,,current,,The minor release version of the running software.
.1.3.6.1.4.1.14525.4.2.1.4,TRAPEZE-NETWORKS-BASIC-MIB::trpzVersionString,OCTET,read-only,,current,,The version string of the running software, including
.1.3.6.1.4.1.14525.4.2.2,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilityDomainInfo,,,,,,
.1.3.6.1.4.1.14525.4.2.2.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilityDomainName,OCTET,read-only,,current,,The mobility domain containing the switch, or a
.1.3.6.1.4.1.14525.4.2.2.2,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilitySeedIp,IpAddress,read-only,,current,,The IPv4 address of the seed switch for this switch's
.1.3.6.1.4.1.14525.4.2.2.3,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilityMemberTableSize,INTEGER,read-only,,current,,The number of entries in the mobility member table,
.1.3.6.1.4.1.14525.4.2.2.4,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilityMemberTable,,not-accessible,,current,,Table of members of the mobility domain, indexed
.1.3.6.1.4.1.14525.4.2.2.4.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilityMemberEntry,,not-accessible,trpzMobilityMemberEntryAddr,current,,An entry in the trpzMobilityMemberTable table.
.1.3.6.1.4.1.14525.4.2.2.4.1.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzMobilityMemberEntryAddr,IpAddress,read-only,,current,,IPv4 address of a member of the mobility domain.
.1.3.6.1.4.1.14525.4.2.3,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoGroup,,,,,,
.1.3.6.1.4.1.14525.4.2.3.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoTableSize,INTEGER,read-only,,current,,The number of entries in the license table,
.1.3.6.1.4.1.14525.4.2.3.2,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoTable,,not-accessible,,current,,Table of installed licenses on the switch. The
.1.3.6.1.4.1.14525.4.2.3.2.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoEntry,,not-accessible,trpzLicenseInfoEntryFeature,current,,A license table entry.
.1.3.6.1.4.1.14525.4.2.3.2.1.1,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoEntryFeature,INTEGER,not-accessible,,current,none(1):maxSupportedAPsOrDAPs(2):maxSupportedSessions(3):fips(11):advancedVoice(12):highAvailability(13):maxSupportedHighSpeedMeshBridgingAPs(14):maxSupportedAdvancedLocalSwitchingAPs(16):maxSupportedRemoteOfficeAPs(17):maxSupportedSpectrumAnalysisAPs(18),The feature being reported on
.1.3.6.1.4.1.14525.4.2.3.2.1.2,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoEntryValue,INTEGER,read-only,,current,,The value of the feature enabled, for example
.1.3.6.1.4.1.14525.4.2.3.2.1.3,TRAPEZE-NETWORKS-BASIC-MIB::trpzLicenseInfoEntryDescr,OCTET,read-only,,current,,A human interpretable description of this license,
.1.3.6.1.4.1.14525.4.3,TRAPEZE-NETWORKS-AP-TC::trpzApTc,,,,,,Textual Conventions used by Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent using these TCs. Copyright 2006-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionMib,,,,,,Client Session MIB. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2005-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.4.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionObjects,,,,,,
.1.3.6.1.4.1.14525.4.4.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionDataObjects,,,,,,
.1.3.6.1.4.1.14525.4.4.1.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessionTable,,not-accessible,,current,,Client Session Table.
.1.3.6.1.4.1.14525.4.4.1.1.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessionEntry,,not-accessible,trpzClSessClientSessMacAddress,current,,Information about a particular client session.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessMacAddress,OCTET,not-accessible,,current,,Client MAC address.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessSessionId,OCTET,read-only,,current,,Session ID is a string long enough to be sure we can make it unique over a long time.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessUsername,OCTET,read-only,,current,,Client user name.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessIpAddress,IpAddress,read-only,,current,,Client IP address. If the client has no IP address, the value will be 0.0.0.0.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.5,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessEncryptionType,INTEGER,read-only,,current,none(1):aesCcm(2):aesOcb(3):tkip(4):wep104(5):wep40(6):staticWep(7),Encryption type.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.6,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessVlan,OCTET,read-only,,current,,The name of the client VLAN.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.7,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessApSerialNum,OCTET,read-only,,current,,Serial Number of the AP this client is connected to. It is a zero length string when wired access is used.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.8,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessRadioNum,INTEGER,read-only,,current,radio-1(1):radio-2(2):not-applicable(3),Number of the Radio that provides service to this client. It is 'not-applicable' when wired access is used.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.9,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessAccessType,INTEGER,read-only,,obsolete,ap(1):dap(2):wired(3),Access type this client uses (via AP, DAP or wired). Obsoleted by trpzClSessClientSessAccessMode.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.10,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessAuthMethod,INTEGER,read-only,,obsolete,none(1):identity(2):notification(3):nak(4):md5(5):otp(6):tokenCard(7):tls(14):leap(18):ttls(22):peap(26):msChapv2(27):eapExt(34):passThru(255),Authentication Method. Obsolete, use trpzClSessClientSessDot1xAuthMethod instead.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.11,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessAuthServer,IpAddress,read-only,,current,,Authentication Server's IP Address. If the client is authenticated via the local DB, or not authenticated, its value will be the system IP.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.12,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessPortOrNum,Unsigned32,read-only,,obsolete,,Port number. Obsoleted by trpzClSessClientSessApNum.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.13,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessVlanTag,Unsigned32,read-only,,current,,VLAN tag.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.14,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessTimeStamp,TimeTicks,read-only,,current,,Session start time stamp.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.15,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessSsid,OCTET,read-only,,current,,SSID.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.16,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessState,INTEGER,read-only,,deprecated,invalid(1):initializing(2):assocReqAndAuth(3):assocAndAuth(4):wired(5):webLoginPh1(6):webLoginPh1B(7):webLoginPh1F(8):webLoginPh2(9):webPortalLogin(10):authorizing(11):authorized(12):active(13):activePortal(14):deassociated(15):roamingAway(16):updatedToRoam(17):roamedAway(18):killing(19):free(20):enforceSoda(21),Session state. Deprecated, use trpzClSessClientSessSessionState instead.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.17,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessLoginType,INTEGER,read-only,,current,mac(1):web(2):dot1x(3):last-resort(4):profile(5),Login type (mac, web, dot1x or last-resort).
.1.3.6.1.4.1.14525.4.4.1.1.1.1.18,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessDot1xAuthMethod,INTEGER,read-only,,current,none(1):eap-tls(2):eap-ttls(3):md5(4):peap(5):leap(6):pass-through(7),Dot1x Authentication Method.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.19,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessSessionState,INTEGER,read-only,,current,associated(1):authorizing(2):authorized(3):active(4):de-associated(5):roaming-away(6):updated-to-roam(7):wired(8):clearing(9):invalid(10):web-authing(11),Session non-intermediate state.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.20,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessAccessMode,INTEGER,read-only,,current,other(1):ap(2):wired(3),Access mode (type) this client uses (via AP or wired). Obsoletes trpzClSessClientSessAccessType since in 6.0 directly attached APs and DAPs were unified.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.21,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessApNum,Unsigned32,read-only,,current,,The AP providing wireless service to this client is identified by its administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. Meaningful when trpzClSessClientSessAccessMode = 'ap'. Obsoletes trpzClSessClientSessPortOrNum since in 6.0 directly attached APs and DAPs were unified.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.22,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessPhysPortNum,Unsigned32,read-only,,current,,The physical port used by this wired-auth client is identified by its port number on the AC (switch). Zero means the port is unknown or not applicable (for example, when trpzClSessClientSessAccessMode = 'ap'). Meaningful when trpzClSessClientSessAccessMode = 'wired'.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.23,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessDeviceType,OCTET,read-only,,current,,The type of the client device. Is a zero length string if unknown or the device detection feature is disabled.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.24,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessDeviceGroup,OCTET,read-only,,current,,The group that the detected client device type belongs to. Is a zero length string if the device type is unknown or the device detection feature is disabled.
.1.3.6.1.4.1.14525.4.4.1.1.1.1.25,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessDeviceProfileName,OCTET,read-only,,current,,The name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode, if not set or if the device detection feature is disabled. In 'detect-only' mode policy enforcement is disabled.
.1.3.6.1.4.1.14525.4.4.1.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamingHistoryTable,,not-accessible,,current,,Roaming History Table. Expansion of Client Session Table.
.1.3.6.1.4.1.14525.4.4.1.1.2.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamingHistoryEntry,,not-accessible,trpzClSessRoamHistMacAddress:trpzClSessRoamHistIndex,current,,Roaming History Entry.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistMacAddress,OCTET,not-accessible,,current,,Client MAC address.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistIndex,Unsigned32,not-accessible,,current,,Entry index.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistApSerialNum,OCTET,read-only,,current,,Serial Number of the AP this client was connected to.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistRadioNum,INTEGER,read-only,,current,radio-1(1):radio-2(2):not-applicable(3),Number of the Radio that provided service to this client.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.5,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistAccessType,INTEGER,read-only,,obsolete,ap(1):dap(2):wired(3),Access type used by this client (via AP, DAP or wired). Obsoleted by trpzClSessRoamHistAccessMode.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.6,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistApNumOrPort,Unsigned32,read-only,,obsolete,,AP port number, DAP number, or Port number for wired access. Obsoleted by trpzClSessRoamHistApNum.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.7,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistIpAddress,IpAddress,read-only,,current,,IP address of the AC (wireless switch) the client or AP was connected to.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.8,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistTimeStamp,TimeTicks,read-only,,current,,The difference between the time the session was created on the roamed-to switch and the time the last switch, the one where the user is at currently, started. The timestamp unit is in hundredths of seconds.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.9,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistAccessMode,INTEGER,read-only,,current,other(1):ap(2):wired(3),Access mode (type) used by this client (via AP or wired). Obsoletes trpzClSessRoamHistAccessType since in 6.0 directly attached APs and DAPs were unified.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.10,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistApNum,Unsigned32,read-only,,current,,The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. Obsoletes trpzClSessRoamHistApNumOrPort since in 6.0 directly attached APs and DAPs were unified.
.1.3.6.1.4.1.14525.4.4.1.1.2.1.11,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessRoamHistPhysPortNum,Unsigned32,read-only,,current,,The physical port used by this wired-auth client is identified by its port number on the AC (switch). Zero means the port is unknown or not applicable (for example, when trpzClSessRoamHistAccessMode = 'ap'). Meaningful when trpzClSessRoamHistAccessMode = 'wired'.
.1.3.6.1.4.1.14525.4.4.1.1.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessionStatisticsTable,,not-accessible,,current,,Client Session Statistics Table.
.1.3.6.1.4.1.14525.4.4.1.1.3.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessionStatisticsEntry,,not-accessible,trpzClSessClientSessStatsMacAddress,current,,Client Session Statistics Table Entry.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsMacAddress,OCTET,not-accessible,,current,,Client MAC address.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsUniPktIn,Counter64,read-only,,current,,Unicast packets in.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsUniOctetIn,Counter64,read-only,,current,,Unicast octets in.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsUniPktOut,Counter64,read-only,,current,,Unicast packets out.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.5,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsUniOctetOut,Counter64,read-only,,current,,Unicast octets out.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.6,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsMultiPktIn,Counter64,read-only,,current,,Multicast packets in.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.7,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsMultiOctetIn,Counter64,read-only,,current,,Multicast octets in.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.8,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsEncErrPkt,Counter64,read-only,,current,,Number of packets with encryption errors.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.9,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsEncErrOctet,Counter64,read-only,,current,,Number of octets with encryption errors.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.10,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsLastRate,Unsigned32,read-only,,current,,Last packet data rate.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.11,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsLastRssi,Integer32,read-only,,current,,RSSI (Received Signal Strength Indicator) for last packet, in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal.
.1.3.6.1.4.1.14525.4.4.1.1.3.1.12,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientSessStatsLastSNR,Integer32,read-only,,current,,Last packet data Signal to Noise Ratio.
.1.3.6.1.4.1.14525.4.4.1.1.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessTotalSessions,Unsigned32,read-only,,current,,Total number of sessions.
.1.3.6.1.4.1.14525.4.4.1.1.5,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientAddressTable,,not-accessible,,current,,Client Address Table. This table contains the clients' Internet addresses. Each client may have one IPv4 address, one IPv6 link-local address and multiple IPv6 global addresses. Expansion of the Client Session Table.
.1.3.6.1.4.1.14525.4.4.1.1.5.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientAddressEntry,,not-accessible,trpzClSessClientSessMacAddress:trpzClSessClientAddressIndex,current,,An entry in the Client Address table. A client's MAC address together with an unsigned integer uniquely identify one of that client's Internet addresses.
.1.3.6.1.4.1.14525.4.4.1.1.5.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientAddressIndex,Unsigned32,not-accessible,,current,,Last part of the composite index of the Client Address table. The client is identified by the first part of the composite index: 'trpzClSessClientSessMacAddress'. Index 1 corresponds to the IPv4 address of the client. Index 2 corresponds to the IPv6 link-local address of the client. Indexes 3-9 are reserved for future use. Indexes starting at 10 correspond to IPv6 global addresses of the client; the number of IPv6 addresses per client may vary.
.1.3.6.1.4.1.14525.4.4.1.1.5.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzClSessClientAddressValue'.
.1.3.6.1.4.1.14525.4.4.1.1.5.1.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientAddressValue,OCTET,read-only,,current,,Client Internet address. The type of this address is specified in 'trpzClSessClientAddressType'.
.1.3.6.1.4.1.14525.4.4.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionConformance,,,,,,
.1.3.6.1.4.1.14525.4.4.1.2.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionCompliances,,,,,,
.1.3.6.1.4.1.14525.4.4.1.2.1.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionCompliance,,,,,,The compliance statement for devices that implement the Client Session MIB. This compliance statement was for releases 4.1 and 4.2 of AC (wireless switch) software. This compliance statement is replaced by trpzClientSessionComplianceRev2.
.1.3.6.1.4.1.14525.4.4.1.2.1.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionComplianceRev2,,,,,,The compliance statement for devices that implement the Client Session MIB. This compliance statement was for releases 5.0 and 6.0 of AC (wireless switch) software. This compliance statement is replaced by trpzClientSessionComplianceRev3.
.1.3.6.1.4.1.14525.4.4.1.2.1.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionComplianceRev3,,,,,,The compliance statement for devices that implement the Client Session MIB. This compliance statement is for releases 6.2 to 7.7 of AC (wireless switch) software. This compliance statement is replaced by trpzClientSessionComplianceRev4.
.1.3.6.1.4.1.14525.4.4.1.2.1.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionComplianceRev4,,,,,,The compliance statement for devices that implement the Client Session MIB. This compliance statement is for releases 8.0 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.4.1.2.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionGroups,,,,,,
.1.3.6.1.4.1.14525.4.4.1.2.2.1,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessionCommonGroup,,,,,,Mandatory group of objects implemented to provide Client Session info in releases 4.1 and 4.2 of AC (wireless switch) software. Replaced by trpzClientSessClientSessionTableGroup, trpzClientSessRoamingHistoryTableGroup, trpzClientSessClientSessionStatisticsTableGroup.
.1.3.6.1.4.1.14525.4.4.1.2.2.2,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessScalarsGroup,,,,,,Group of scalar objects implemented to provide general Client info in releases 5.0 and greater.
.1.3.6.1.4.1.14525.4.4.1.2.2.3,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessClientSessionTableGroup,,,,,,Group of columnar objects implemented to provide Client Session info in releases 5.0 and 6.0. Replaced by trpzClientSessClientSessionTableGroupRev2.
.1.3.6.1.4.1.14525.4.4.1.2.2.4,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessRoamingHistoryTableGroup,,,,,,Group of columnar objects implemented to provide roaming history per Client Session in releases 5.0 and 6.0. Replaced by trpzClientSessRoamingHistoryTableGroupRev2.
.1.3.6.1.4.1.14525.4.4.1.2.2.5,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessClientSessionStatisticsTableGroup,,,,,,Group of columnar objects implemented to provide statistics per Client Session in releases 5.0 and greater.
.1.3.6.1.4.1.14525.4.4.1.2.2.6,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessClientSessionTableGroupRev2,,,,,,Group of columnar objects implemented to provide Client Session info in releases 6.2 to 7.7.
.1.3.6.1.4.1.14525.4.4.1.2.2.7,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessRoamingHistoryTableGroupRev2,,,,,,Group of columnar objects implemented to provide roaming history per Client Session in releases 6.2 and greater.
.1.3.6.1.4.1.14525.4.4.1.2.2.8,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClSessClientAddressTableGroup,,,,,,Group of columnar objects implemented to provide a complete listing of the clients' Internet addresses in releases 8.0 and greater.
.1.3.6.1.4.1.14525.4.4.1.2.2.9,TRAPEZE-NETWORKS-CLIENT-SESSION-MIB::trpzClientSessClientSessionTableGroupRev3,,,,,,Group of columnar objects implemented to provide Client Session info in releases 8.0 and greater.
.1.3.6.1.4.1.14525.4.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusMib,,,,,,AP Status objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2005-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.5.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusObjects,,,,,,
.1.3.6.1.4.1.14525.4.5.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatDataObjects,,,,,,
.1.3.6.1.4.1.14525.4.5.1.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatNumAps,Unsigned32,read-only,,current,,Number of APs present and seen by AC (AP in ''ALIVE'' state).
.1.3.6.1.4.1.14525.4.5.1.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusTable,,not-accessible,,current,,A table describing all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by MAC in 'trpzApStatApStatusMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.2.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusEntry,,not-accessible,trpzApStatApStatusSerialNum,current,,Information about a particular AP attached to the AC.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusSerialNum,OCTET,not-accessible,,current,,The Serial Number of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusBaseMac,OCTET,read-only,,current,,The Base MAC address of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusAttachType,INTEGER,read-only,,current,directAttach(1):networkAttach(2),How this AP is attached to the AC (directly or via L2/L3 network).
.1.3.6.1.4.1.14525.4.5.1.1.2.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusPortOrDapNum,Unsigned32,read-only,,obsolete,,The Port Number if this AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. Obsoleted by trpzApStatApStatusApNum.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusApState,INTEGER,read-only,,current,cleared(1):init(2):bootStarted(3):imageDownloaded(4):connectFailed(5):configuring(6):operational(7):redundant(10):connOutage(20),The State of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusModel,OCTET,read-only,,current,,The Model name of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusFingerprint,OCTET,read-only,,current,,The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusApName,OCTET,read-only,,current,,The name of this AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73').
.1.3.6.1.4.1.14525.4.5.1.1.2.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusVlan,OCTET,read-only,,current,,The name of the VLAN associated with this DAP. Only valid for network attached APs, otherwise zero length string.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusIpAddress,IpAddress,read-only,,current,,The IP Address of this DAP. Only valid for network attached APs, otherwise 0.0.0.0.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusUptimeSecs,Unsigned32,read-only,,current,,Time in seconds since this AP's last boot.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusCpuInfo,OCTET,read-only,,current,,Information about this AP's CPU.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusManufacturerId,OCTET,read-only,,current,,Information about this AP's manufacturer.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusRamBytes,Unsigned32,read-only,,current,,The memory capacity of this AP (in bytes).
.1.3.6.1.4.1.14525.4.5.1.1.2.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusHardwareRev,OCTET,read-only,,current,,The hardware revision of this AP (e.g. 'A3').
.1.3.6.1.4.1.14525.4.5.1.1.2.1.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusClientSessions,Unsigned32,read-only,,current,,The number of client sessions on this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusSoftwareVer,OCTET,read-only,,current,,The software version for this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.18,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusBootVer,OCTET,read-only,,current,,The boot loader version for this AP.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.19,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusApNum,Unsigned32,read-only,,current,,The administratively assigned AP Number. Obsoletes trpzApStatApStatusPortOrDapNum.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.20,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusPhysPortNum,Unsigned32,read-only,,current,,Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.21,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusIpNetmask,IpAddress,read-only,,current,,The IP Netmask of this AP. Only valid for network attached APs, otherwise 0.0.0.0.
.1.3.6.1.4.1.14525.4.5.1.1.2.1.22,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusWiredIfNumber,Unsigned32,read-only,,current,,The number of wired network interfaces (regardless of their current state) present on this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacTable,,not-accessible,,current,,A table describing all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by Serial Number in 'trpzApStatApStatusTable'.
.1.3.6.1.4.1.14525.4.5.1.1.3.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacEntry,,not-accessible,trpzApStatApStatusMacBaseMac,current,,Information about a particular AP attached to the AC.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacBaseMac,OCTET,not-accessible,,current,,The Base MAC address of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacSerialNum,OCTET,read-only,,current,,The Serial Number of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacAttachType,INTEGER,read-only,,current,directAttach(1):networkAttach(2),How this AP is attached to the AC (directly or via L2/L3 network).
.1.3.6.1.4.1.14525.4.5.1.1.3.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacPortOrDapNum,Unsigned32,read-only,,obsolete,,The Port Number if this AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. Obsoleted by trpzApStatApStatusMacApNum.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacApState,INTEGER,read-only,,current,cleared(1):init(2):bootStarted(3):imageDownloaded(4):connectFailed(5):configuring(6):operational(7):redundant(10):connOutage(20),The State of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacModel,OCTET,read-only,,current,,The Model name of this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacFingerprint,OCTET,read-only,,current,,The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacApName,OCTET,read-only,,current,,The name of this AP, as assigned in AC's CLI; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73').
.1.3.6.1.4.1.14525.4.5.1.1.3.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacVlan,OCTET,read-only,,current,,The name of the VLAN associated with this DAP. Only valid for network attached APs, otherwise zero length string.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacIpAddress,IpAddress,read-only,,current,,The IP Address of this DAP. Only valid for network attached APs, otherwise 0.0.0.0.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacUptimeSecs,Unsigned32,read-only,,current,,Time in seconds since this AP's last boot.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacCpuInfo,OCTET,read-only,,current,,Information about this AP's CPU.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacManufacturerId,OCTET,read-only,,current,,Information about this AP's manufacturer.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacRamBytes,Unsigned32,read-only,,current,,The memory capacity of this AP (in bytes).
.1.3.6.1.4.1.14525.4.5.1.1.3.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacHardwareRev,OCTET,read-only,,current,,The hardware revision of this AP (e.g. 'A3').
.1.3.6.1.4.1.14525.4.5.1.1.3.1.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacClientSessions,Unsigned32,read-only,,current,,The number of client sessions on this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacSoftwareVer,OCTET,read-only,,current,,The software version for this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.18,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacBootVer,OCTET,read-only,,current,,The boot loader version for this AP.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.19,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacApNum,Unsigned32,read-only,,current,,The administratively assigned AP Number. Obsoletes trpzApStatApStatusMacPortOrDapNum.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.20,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacPhysPortNum,Unsigned32,read-only,,current,,Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.21,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacIpNetmask,IpAddress,read-only,,current,,The IP Netmask of this AP. Only valid for network attached APs, otherwise 0.0.0.0.
.1.3.6.1.4.1.14525.4.5.1.1.3.1.22,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatApStatusMacWiredIfNumber,Unsigned32,read-only,,current,,The number of wired network interfaces (regardless of their current state) present on this AP.
.1.3.6.1.4.1.14525.4.5.1.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusTable,,not-accessible,,current,,A table describing the radios on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by Radio Base MAC in 'trpzApStatRadioStatusMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.4.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusEntry,,not-accessible,trpzApStatRadioStatusApSerialNum:trpzApStatRadioStatusRadioNum,current,,Information about a particular radio on an AP attached to the AC.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusApSerialNum,OCTET,not-accessible,,current,,The Serial Number of the AP containing this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioNum,INTEGER,not-accessible,,current,radio-1(1):radio-2(2):not-applicable(3),The Number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusBaseMac,OCTET,read-only,,current,,The Base MAC address of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusEnable,INTEGER,read-only,,obsolete,enabled(1):disabled(2),The configured mode (enabled/disabled) of this radio. Obsoleted by trpzApStatRadioStatusRadioMode.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioConfigState,INTEGER,read-only,,current,configInit(1):configFail(2):configOk(3),The configuration state of this radio (INIT, FAIL, OK).
.1.3.6.1.4.1.14525.4.5.1.1.4.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusCurrentPowerLevel,Unsigned32,read-only,,current,,The Current Power Level of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusCurrentChannelNum,Unsigned32,read-only,,current,,The Current Channel Number of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusClientSessions,Unsigned32,read-only,,current,,The number of client sessions on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMaxPowerLevel,Unsigned32,read-only,,current,,The Maximum Power Level for this radio, with the current antenna, on the current channel (trpzApStatRadioStatusCurrentChannelNum), as constrained by the current regulatory domain.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioPhyType,INTEGER,read-only,,current,typeUnknown(1):typeA(2):typeB(3):typeG(4):typeNA(5):typeNG(6),The current Physical Type of this radio (typeUnknown, typeA, typeB, typeG).
.1.3.6.1.4.1.14525.4.5.1.1.4.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioMode,INTEGER,read-only,,current,enabled(1):disabled(2):sentry(3),The configured mode of this radio (enabled/disabled/sentry). Obsoletes trpzApStatRadioStatusEnable.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioChannelWidth,INTEGER,read-only,,current,channelWidth20MHz(1):channelWidth40MHz(2),The configured Channel Width for this radio (20MHz/40MHz).
.1.3.6.1.4.1.14525.4.5.1.1.4.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioMimoState,INTEGER,read-only,,obsolete,mimoOther(1):mimo1x1(2):mimo2x3(3):mimo3x3(4),MIMO state of this radio (1x1/2x3/3x3). Obsoleted by trpzApStatRadioStatusRadioMimoRxChains and trpzApStatRadioStatusRadioMimoTxChains.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMinPowerLevel,Unsigned32,read-only,,current,,The Minimum Power Level for this radio, with the current antenna.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioMimoRxChains,Unsigned32,read-only,,current,,The number of MIMO Transmit chains for this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusRadioMimoTxChains,Unsigned32,read-only,,current,,The number of MIMO Receive chains for this radio.
.1.3.6.1.4.1.14525.4.5.1.1.4.1.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusSpectralDataCollect,INTEGER,read-only,,current,true(1):false(2),Indicates whether this radio is in Spectral Data Collecting mode.
.1.3.6.1.4.1.14525.4.5.1.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacTable,,not-accessible,,current,,A table describing the radios on all the APs currently present and managed by this AC (APs in ''ALIVE'' state). Same data is available indexed by AP Serial Number and Radio Number in 'trpzApStatRadioStatusTable'.
.1.3.6.1.4.1.14525.4.5.1.1.5.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacEntry,,not-accessible,trpzApStatRadioStatusMacBaseMac,current,,Information about a particular radio on an AP attached to the AC.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacBaseMac,OCTET,not-accessible,,current,,The Base MAC address of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacApSerialNum,OCTET,read-only,,current,,The Serial Number of the AP containing this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioNum,INTEGER,read-only,,current,radio-1(1):radio-2(2):not-applicable(3),The Number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacEnable,INTEGER,read-only,,obsolete,enabled(1):disabled(2),The configured mode (enabled/disabled) of this radio. Obsoleted by trpzApStatRadioStatusMacRadioMode.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioConfigState,INTEGER,read-only,,current,configInit(1):configFail(2):configOk(3),The configuration state of this radio (INIT, FAIL, OK).
.1.3.6.1.4.1.14525.4.5.1.1.5.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacCurrentPowerLevel,Unsigned32,read-only,,current,,The Current Power Level of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacCurrentChannelNum,Unsigned32,read-only,,current,,The Current Channel Number of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacClientSessions,Unsigned32,read-only,,current,,The number of client sessions on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacMaxPowerLevel,Unsigned32,read-only,,current,,The Maximum Power Level for this radio, with the current antenna, on the current channel (trpzApStatRadioStatusMacCurrentChannelNum), as constrained by the current regulatory domain.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioPhyType,INTEGER,read-only,,current,typeUnknown(1):typeA(2):typeB(3):typeG(4):typeNA(5):typeNG(6),The current Physical Type of this radio (typeUnknown, typeA, typeB, typeG).
.1.3.6.1.4.1.14525.4.5.1.1.5.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioMode,INTEGER,read-only,,current,enabled(1):disabled(2):sentry(3),The configured mode of this radio (enabled/disabled/sentry). Obsoletes trpzApStatRadioStatusMacEnable.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioChannelWidth,INTEGER,read-only,,current,channelWidth20MHz(1):channelWidth40MHz(2),The configured Channel Width for this radio (20MHz/40MHz).
.1.3.6.1.4.1.14525.4.5.1.1.5.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioMimoState,INTEGER,read-only,,obsolete,mimoOther(1):mimo1x1(2):mimo2x3(3):mimo3x3(4),MIMO state of this radio (1x1/2x3/3x3). Obsoleted by trpzApStatRadioStatusMacRadioMimoRxChains and trpzApStatRadioStatusMacRadioMimoTxChains.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacMinPowerLevel,Unsigned32,read-only,,current,,The Minimum Power Level for this radio, with the current antenna.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioMimoRxChains,Unsigned32,read-only,,current,,The number of MIMO Transmit chains for this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacRadioMimoTxChains,Unsigned32,read-only,,current,,The number of MIMO Receive chains for this radio.
.1.3.6.1.4.1.14525.4.5.1.1.5.1.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioStatusMacSpectralDataCollect,INTEGER,read-only,,current,true(1):false(2),Indicates whether this radio is in Spectral Data Collecting mode.
.1.3.6.1.4.1.14525.4.5.1.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceTable,,not-accessible,,current,,A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by BSSID in 'trpzApStatRadioServiceMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.6.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceEntry,,not-accessible,trpzApStatRadioServApSerialNum:trpzApStatRadioServRadioNum:trpzApStatRadioServSsid,current,,Information about a particular service (SSID) on a radio.
.1.3.6.1.4.1.14525.4.5.1.1.6.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServApSerialNum,OCTET,not-accessible,,current,,The Serial Number of the AP containing this radio.
.1.3.6.1.4.1.14525.4.5.1.1.6.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServRadioNum,INTEGER,not-accessible,,current,radio-1(1):radio-2(2):not-applicable(3),The Number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.5.1.1.6.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServSsid,OCTET,not-accessible,,current,,The service/SSID name in use on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.6.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServBssid,OCTET,read-only,,current,,The MAC address (a.k.a. BSSID) of this service/SSID on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.6.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServServiceProfileName,OCTET,read-only,,current,,The Name of the Service Profile having this SSID and associated to the (only) radio profile of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceMacTable,,not-accessible,,current,,A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by AP Serial Number, Radio Number and SSID in 'trpzApStatRadioServiceTable'.
.1.3.6.1.4.1.14525.4.5.1.1.7.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceMacEntry,,not-accessible,trpzApStatRadioServMacBssid,current,,Information about a particular service (SSID) on a radio.
.1.3.6.1.4.1.14525.4.5.1.1.7.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServMacBssid,OCTET,not-accessible,,current,,The MAC address (a.k.a. BSSID) of this service/SSID on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.7.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServMacApSerialNum,OCTET,read-only,,current,,The Serial Number of the AP containing this radio.
.1.3.6.1.4.1.14525.4.5.1.1.7.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServMacRadioNum,INTEGER,read-only,,current,radio-1(1):radio-2(2):not-applicable(3),The Number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.5.1.1.7.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServMacSsid,OCTET,read-only,,current,,The service/SSID name in use on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.7.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServMacServiceProfileName,OCTET,read-only,,current,,The Name of the Service Profile that configures this BSSID.
.1.3.6.1.4.1.14525.4.5.1.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceOpRateSetTable,,not-accessible,,current,,A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by BSSID in 'trpzApStatRadioServiceOpRateSetMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.8.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceOpRateSetEntry,,not-accessible,trpzApStatRadioSORSetApSerialNum:trpzApStatRadioSORSetRadioNum:trpzApStatRadioSORSetSsid,current,,Information about a particular service (SSID) on a radio.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetApSerialNum,OCTET,not-accessible,,current,,The Serial Number of the AP containing this radio.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetRadioNum,INTEGER,not-accessible,,current,radio-1(1):radio-2(2):not-applicable(3),The Number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetSsid,OCTET,not-accessible,,current,,The service/SSID name in use on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMandatory,OCTET,read-only,,current,,The Mandatory Rate Set configured for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetDisabled,OCTET,read-only,,current,,The Disabled Rate Set configured for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetBeacon,OCTET,read-only,,current,,The configured Beacon Rate for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.8.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMulticast,OCTET,read-only,,current,,The configured Multicast Rate for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceOpRateSetMacTable,,not-accessible,,current,,A table describing the radio services associated with the APs currently present and managed by this AC. Same data is available indexed by AP Serial Number, Radio Number and SSID in 'trpzApStatRadioServiceOpRateSetTable'.
.1.3.6.1.4.1.14525.4.5.1.1.9.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioServiceOpRateSetMacEntry,,not-accessible,trpzApStatRadioSORSetMacBssid,current,,Information about a particular service (SSID) on a radio.
.1.3.6.1.4.1.14525.4.5.1.1.9.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMacBssid,OCTET,not-accessible,,current,,The MAC address (a.k.a. BSSID) of this service/SSID on this radio.
.1.3.6.1.4.1.14525.4.5.1.1.9.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMacMandatory,OCTET,read-only,,current,,The Mandatory Rate Set configured for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.9.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMacDisabled,OCTET,read-only,,current,,The Disabled Rate Set configured for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.9.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMacBeacon,OCTET,read-only,,current,,The configured Beacon Rate for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.9.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioSORSetMacMulticast,OCTET,read-only,,current,,The configured Multicast Rate for this radio service.
.1.3.6.1.4.1.14525.4.5.1.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatisticsTable,,not-accessible,,current,,A table providing the Radio Operational Statistics for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC in 'trpzApStatRadioOpStatisticsMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.10.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatisticsEntry,,not-accessible,trpzApStatRadioOpStatsApSerialNum:trpzApStatRadioOpStatsRadioNum,current,,Operational statistics (counters) for a particular radio.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsApSerialNum,OCTET,not-accessible,,current,,The Serial Number of the AP containing this radio.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRadioNum,INTEGER,not-accessible,,current,radio-1(1):radio-2(2):not-applicable(3),The Number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxUniPkt,Counter64,read-only,,current,,Number of unicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxUniOctet,Counter64,read-only,,current,,Total number of octets transmitted in unicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxMultiPkt,Counter64,read-only,,current,,Number of multicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxMultiOctet,Counter64,read-only,,current,,Total number of octets transmitted in multicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRxPkt,Counter64,read-only,,current,,Number of packets received.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRxOctet,Counter64,read-only,,current,,Total number of octets received.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsUndcrptPkt,Counter64,read-only,,current,,Number of undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsUndcrptOctet,Counter64,read-only,,current,,Total number of octets in undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsPhyErr,Counter64,read-only,,current,,Number of Physical Errors occurred.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsResetCount,Counter32,read-only,,current,,Number of reset operations for this radio.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsAutoTuneChannelChangeCount,Counter32,read-only,,current,,Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxRetriesCount,Counter32,read-only,,current,,Number of Transmission Retries.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsUserSessions,Gauge32,read-only,,current,,Number of client sessions using this radio at the current moment.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsNoiseFloor,Integer32,read-only,,current,,Noise Floor in dBm.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsClientAssociations,Counter32,read-only,,current,,The total number of client association attempts on this radio (including re-association attempts).
.1.3.6.1.4.1.14525.4.5.1.1.10.1.18,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsClientFailedAssociations,Counter32,read-only,,current,,The total number of failed client association attempts on this radio (including re-association attempts).
.1.3.6.1.4.1.14525.4.5.1.1.10.1.19,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsClientReAssociations,Counter32,read-only,,current,,The total number of client re-association attempts.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.20,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsSignalingPkt,Counter64,read-only,,current,,The total number of 802.11 management frames and 802.11 control frames transmitted and received by this radio.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.21,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsReTransmitOctet,Counter64,read-only,,current,,The total number of re-transmit octets.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.22,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRefusedConnectionCount,Counter32,read-only,,current,,Number of refused connections due to not enough resources.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.23,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRxDataPkt,Counter64,read-only,,current,,Number of Data Packets received.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.24,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRxAuthPkt,Counter64,read-only,,current,,Number of Authentication Packets received.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.25,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsRxAssocPkt,Counter64,read-only,,current,,Number of Association Packets received.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.26,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxDataPkt,Counter64,read-only,,current,,Number of Data Packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.27,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxAuthRespPkt,Counter64,read-only,,current,,Number of Authentication Response Packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.10.1.28,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsTxAssocRespPkt,Counter64,read-only,,current,,Number of Association Response Packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatisticsMacTable,,not-accessible,,current,,A table providing the Radio Operational Statistics for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number and Radio Number in 'trpzApStatRadioOpStatisticsTable'.
.1.3.6.1.4.1.14525.4.5.1.1.11.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatisticsMacEntry,,not-accessible,trpzApStatRadioOpStatsMacBaseMac,current,,Operational statistics (counters) for a particular radio.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacBaseMac,OCTET,not-accessible,,current,,The Base MAC address of this radio.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxUniPkt,Counter64,read-only,,current,,Number of unicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxUniOctet,Counter64,read-only,,current,,Total number of octets transmitted in unicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxMultiPkt,Counter64,read-only,,current,,Number of multicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxMultiOctet,Counter64,read-only,,current,,Total number of octets transmitted in multicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacRxPkt,Counter64,read-only,,current,,Number of packets received.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacRxOctet,Counter64,read-only,,current,,Total number of octets received.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacUndcrptPkt,Counter64,read-only,,current,,Number of undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacUndcrptOctet,Counter64,read-only,,current,,Total number of octets in undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacPhyErr,Counter64,read-only,,current,,Number of Physical Errors occurred.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacResetCount,Counter32,read-only,,current,,Number of reset operations for this radio.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacAutoTuneChannelChangeCount,Counter32,read-only,,current,,Number of Channel Changes, in Auto-Tuning mode only, since the AP containing this radio became operational. Note that manual channel changes are not counted.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxRetriesCount,Counter32,read-only,,current,,Number of Transmission Retries.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacUserSessions,Gauge32,read-only,,current,,Number of client sessions using this radio at the current moment.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacNoiseFloor,Integer32,read-only,,current,,Noise Floor in dBm.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacClientAssociations,Counter32,read-only,,current,,The total number of client association attempts on this radio (including re-association attempts).
.1.3.6.1.4.1.14525.4.5.1.1.11.1.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacClientFailedAssociations,Counter32,read-only,,current,,The total number of failed client association attempts on this radio (including re-association attempts).
.1.3.6.1.4.1.14525.4.5.1.1.11.1.18,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacClientReAssociations,Counter32,read-only,,current,,The total number of client re-association attempts.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.19,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacSignalingPkt,Counter64,read-only,,current,,The total number of 802.11 management frames and 802.11 control frames transmitted and received by this radio.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.20,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacReTransmitOctet,Counter64,read-only,,current,,The total number of re-transmit octets.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.21,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacRefusedConnectionCount,Counter32,read-only,,current,,Number of refused connections due to not enough resources.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.22,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacRxDataPkt,Counter64,read-only,,current,,Number of Data Packets received.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.23,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacRxAuthPkt,Counter64,read-only,,current,,Number of Authentication Packets received.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.24,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacRxAssocPkt,Counter64,read-only,,current,,Number of Association Packets received.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.25,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxDataPkt,Counter64,read-only,,current,,Number of Data Packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.26,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxAuthRespPkt,Counter64,read-only,,current,,Number of Authentication Response Packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.11.1.27,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioOpStatsMacTxAssocRespPkt,Counter64,read-only,,current,,Number of Association Response Packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatisticsTable,,not-accessible,,current,,A table providing the Radio Operational Statistics per transmission Rate for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC and Data Transmission Rate in 'trpzApStatRadioRateOpStatisticsMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.12.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatisticsEntry,,not-accessible,trpzApStatRadioRateOpStatsApSerialNum:trpzApStatRadioRateOpStatsRadioNum:trpzApStatRadioRateOpStatsRate,current,,Operational statistics (counters) for a particular data transmission rate on a particular radio.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsApSerialNum,OCTET,not-accessible,,current,,Table index.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsRadioNum,INTEGER,not-accessible,,current,radio-1(1):radio-2(2):not-applicable(3),Table index.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsRate,Unsigned32,not-accessible,,current,,Table index.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsTxUniPkt,Counter64,read-only,,current,,Number of unicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsTxUniOctet,Counter64,read-only,,current,,Total number of octets transmitted in unicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsTxMultiPkt,Counter64,read-only,,current,,Number of multicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsTxMultiOctet,Counter64,read-only,,current,,Total number of octets transmitted in multicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsRxPkt,Counter64,read-only,,current,,Number of packets received.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsRxOctet,Counter64,read-only,,current,,Total number of octets received.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsUndcrptPkt,Counter64,read-only,,current,,Number of undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsUndcrptOctet,Counter64,read-only,,current,,Total number of octets in undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.12.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsPhyErr,Counter64,read-only,,current,,Number of Physical Errors occurred.
.1.3.6.1.4.1.14525.4.5.1.1.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatisticsMacTable,,not-accessible,,current,,A table providing the Radio Operational Statistics per transmission Rate for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number, Radio Number and Data Transmission Rate in 'trpzApStatRadioRateOpStatisticsTable'.
.1.3.6.1.4.1.14525.4.5.1.1.13.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatisticsMacEntry,,not-accessible,trpzApStatRadioRateOpStatsMacBaseMac:trpzApStatRadioRateOpStatsMacRate,current,,Operational statistics (counters) for a particular data transmission rate on a particular radio.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacBaseMac,OCTET,not-accessible,,current,,Table index.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacRate,Unsigned32,not-accessible,,current,,Table index.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacTxUniPkt,Counter64,read-only,,current,,Number of unicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacTxUniOctet,Counter64,read-only,,current,,Total number of octets transmitted in unicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacTxMultiPkt,Counter64,read-only,,current,,Number of multicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacTxMultiOctet,Counter64,read-only,,current,,Total number of octets transmitted in multicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacRxPkt,Counter64,read-only,,current,,Number of packets received.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacRxOctet,Counter64,read-only,,current,,Total number of octets received.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacUndcrptPkt,Counter64,read-only,,current,,Number of undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacUndcrptOctet,Counter64,read-only,,current,,Total number of octets in undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.13.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateOpStatsMacPhyErr,Counter64,read-only,,current,,Number of Physical Errors occurred.
.1.3.6.1.4.1.14525.4.5.1.1.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatisticsTable,,not-accessible,,current,,A table providing the Radio Operational Statistics per Extended Rate for all radios on all APs attached to this switch. Same data is available indexed by Radio Base MAC and Extended Rate in 'trpzApStatRadioRateExOpStatisticsMacTable'.
.1.3.6.1.4.1.14525.4.5.1.1.14.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatisticsEntry,,not-accessible,trpzApStatRadioRateExOpStatsApSerialNum:trpzApStatRadioRateExOpStatsRadioNum:trpzApStatRadioRateExOpStatsRateEx,current,,Operational statistics (counters) for a particular data transmission rate on a particular radio.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsApSerialNum,OCTET,not-accessible,,current,,Table index.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsRadioNum,INTEGER,not-accessible,,current,radio-1(1):radio-2(2):not-applicable(3),Table index.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsRateEx,INTEGER,not-accessible,,current,rateUnknown(1):rate1(2):rate2(3):rate5-5(4):rate6(5):rate9(6):rate11(7):rate12(8):rate18(9):rate24(10):rate36(11):rate48(12):rate54(13):rateMCS0(20):rateMCS1(21):rateMCS2(22):rateMCS3(23):rateMCS4(24):rateMCS5(25):rateMCS6(26):rateMCS7(27):rateMCS8(28):rateMCS9(29):rateMCS10(30):rateMCS11(31):rateMCS12(32):rateMCS13(33):rateMCS14(34):rateMCS15(35):rateMCS16(36):rateMCS17(37):rateMCS18(38):rateMCS19(39):rateMCS20(40):rateMCS21(41):rateMCS22(42):rateMCS23(43),Table index.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsTxUniPkt,Counter64,read-only,,current,,Number of unicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsTxUniOctet,Counter64,read-only,,current,,Total number of octets transmitted in unicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsTxMultiPkt,Counter64,read-only,,current,,Number of multicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsTxMultiOctet,Counter64,read-only,,current,,Total number of octets transmitted in multicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsRxPkt,Counter64,read-only,,current,,Number of packets received.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsRxOctet,Counter64,read-only,,current,,Total number of octets received.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsUndcrptPkt,Counter64,read-only,,current,,Number of undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsUndcrptOctet,Counter64,read-only,,current,,Total number of octets in undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.14.1.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsPhyErr,Counter64,read-only,,current,,Number of Physical Errors occurred.
.1.3.6.1.4.1.14525.4.5.1.1.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatisticsMacTable,,not-accessible,,current,,A table providing the Radio Operational Statistics per Extended Rate for all radios on all APs attached to this switch. Same data is available indexed by AP Serial Number, Radio Number and Extended Rate in 'trpzApStatRadioRateExOpStatisticsTable'.
.1.3.6.1.4.1.14525.4.5.1.1.15.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatisticsMacEntry,,not-accessible,trpzApStatRadioRateExOpStatsMacBaseMac:trpzApStatRadioRateExOpStatsMacRateEx,current,,Operational statistics (counters) for a particular data transmission rate on a particular radio.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacBaseMac,OCTET,not-accessible,,current,,Table index.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacRateEx,INTEGER,not-accessible,,current,rateUnknown(1):rate1(2):rate2(3):rate5-5(4):rate6(5):rate9(6):rate11(7):rate12(8):rate18(9):rate24(10):rate36(11):rate48(12):rate54(13):rateMCS0(20):rateMCS1(21):rateMCS2(22):rateMCS3(23):rateMCS4(24):rateMCS5(25):rateMCS6(26):rateMCS7(27):rateMCS8(28):rateMCS9(29):rateMCS10(30):rateMCS11(31):rateMCS12(32):rateMCS13(33):rateMCS14(34):rateMCS15(35):rateMCS16(36):rateMCS17(37):rateMCS18(38):rateMCS19(39):rateMCS20(40):rateMCS21(41):rateMCS22(42):rateMCS23(43),Table index.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacTxUniPkt,Counter64,read-only,,current,,Number of unicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacTxUniOctet,Counter64,read-only,,current,,Total number of octets transmitted in unicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacTxMultiPkt,Counter64,read-only,,current,,Number of multicast packets transmitted.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacTxMultiOctet,Counter64,read-only,,current,,Total number of octets transmitted in multicast packets.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacRxPkt,Counter64,read-only,,current,,Number of packets received.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacRxOctet,Counter64,read-only,,current,,Total number of octets received.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacUndcrptPkt,Counter64,read-only,,current,,Number of undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacUndcrptOctet,Counter64,read-only,,current,,Total number of octets in undecrypted packets.
.1.3.6.1.4.1.14525.4.5.1.1.15.1.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatRadioRateExOpStatsMacPhyErr,Counter64,read-only,,current,,Number of Physical Errors occurred.
.1.3.6.1.4.1.14525.4.5.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusConformance,,,,,,
.1.3.6.1.4.1.14525.4.5.1.2.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusCompliances,,,,,,
.1.3.6.1.4.1.14525.4.5.1.2.1.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusCompliance,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement was for releases 4.1 and 4.2 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev2.
.1.3.6.1.4.1.14525.4.5.1.2.1.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusComplianceRev2,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement was for release 5.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev3.
.1.3.6.1.4.1.14525.4.5.1.2.1.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusComplianceRev3,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement was for release 6.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev4.
.1.3.6.1.4.1.14525.4.5.1.2.1.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusComplianceRev4,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 6.2 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.5.1.2.1.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusComplianceRev5,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 7.1 to 7.2 of AC (wireless switch) software. This compliance statement is replaced by trpzApStatusComplianceRev7.
.1.3.6.1.4.1.14525.4.5.1.2.1.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusComplianceRev6,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement is for release 7.3 of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.5.1.2.1.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusComplianceRev7,,,,,,The compliance statement for devices that implement AP Status MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.5.1.2.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusGroups,,,,,,
.1.3.6.1.4.1.14525.4.5.1.2.2.1,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusCommonGroup,,,,,,Mandatory group of objects implemented to provide AP Status info in releases 4.1 and 4.2 of AC (wireless switch) software. Replaced by trpzApStatusScalarsGroup, trpzApStatusApStatusTablesGroup, trpzApStatusRadioStatusTablesGroup, trpzApStatusRadioServiceTablesGroup, trpzApStatusRadioServiceOpRateSetTablesGroup, trpzApStatusRadioOpStatisticsTablesGroup, trpzApStatusRadioOpStatisticsPerRateTablesGroup.
.1.3.6.1.4.1.14525.4.5.1.2.2.2,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusScalarsGroup,,,,,,Group of scalar objects implemented to provide general AP info.
.1.3.6.1.4.1.14525.4.5.1.2.2.3,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusApStatusTablesGroup,,,,,,Group of columnar objects implemented to provide AP Status info in releases 5.0 and 6.0. Replaced by trpzApStatusApStatusTablesGroupRev2.
.1.3.6.1.4.1.14525.4.5.1.2.2.4,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusTablesGroup,,,,,,Group of columnar objects implemented to provide Radio Status info in releases 5.0 and 6.0. Replaced by trpzApStatusRadioStatusTablesGroupRev2.
.1.3.6.1.4.1.14525.4.5.1.2.2.5,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioServiceTablesGroup,,,,,,Group of columnar objects implemented to provide Radio Service info.
.1.3.6.1.4.1.14525.4.5.1.2.2.6,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioServiceOpRateSetTablesGroup,,,,,,Group of columnar objects implemented to provide the Operational Rate Set per Radio Service.
.1.3.6.1.4.1.14525.4.5.1.2.2.7,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioOpStatisticsTablesGroup,,,,,,Group of columnar objects implemented to provide Radio Operational Statistics.
.1.3.6.1.4.1.14525.4.5.1.2.2.8,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioOpStatisticsPerRateTablesGroup,,,,,,Group of columnar objects implemented to provide Radio Operational Statistics per data transmission Rate.
.1.3.6.1.4.1.14525.4.5.1.2.2.9,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusApStatusVersionsGroup,,,,,,Group of objects implemented to provide AP version info.
.1.3.6.1.4.1.14525.4.5.1.2.2.10,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusApStatusTablesGroupRev2,,,,,,Group of columnar objects implemented to provide AP Status info in releases 6.2 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.11,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusMaxPowerPhyTypeGroup,,,,,,Group of columnar objects implemented to provide more Radio Status info in releases 6.0 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.12,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusTablesGroupRev2,,,,,,Group of columnar objects implemented to provide Radio Status info in releases 6.2 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.13,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusWideMimoGroup,,,,,,Group of columnar objects implemented to provide more Radio Status info in releases 7.0 to 7.2. Replaced by trpzApStatusRadioStatusWideMimoGroupRev2.
.1.3.6.1.4.1.14525.4.5.1.2.2.14,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioOpStatisticsPerRateExTablesGroup,,,,,,Group of columnar objects implemented to provide Radio Operational Statistics detailed per Extended data transmission Rate (covering 802.11n MCS rates) in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.15,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusApStatusPhysPortNumGroup,,,,,,Group of columnar objects implemented to provide the Physical Port Number for a directly attached AP.
.1.3.6.1.4.1.14525.4.5.1.2.2.16,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusApStatusConnectivityGroup,,,,,,Group of columnar objects implemented to provide AP connectivity info in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.17,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusAntennaGroup,,,,,,Group of columnar objects implemented to provide Radio Status info depending on AP model and antenna being used in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.18,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioOpStatisticsClientAssocGroup,,,,,,Group of columnar objects implemented to provide per-radio client association info in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.19,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioOpStatisticsSignErrGroup,,,,,,Group of columnar objects implemented to provide more Radio Operational Statistics info in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.20,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusWideMimoGroupRev2,,,,,,Group of columnar objects implemented to provide more Radio Status info in releases 7.3 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.21,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioOpStatisticsPktDetailGroup,,,,,,Group of columnar objects implemented to provide more Radio Operational Statistics info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.5.1.2.2.22,TRAPEZE-NETWORKS-AP-STATUS-MIB::trpzApStatusRadioStatusSpectralDataGroup,,,,,,Group of columnar objects implemented to provide more Radio Status info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.6,TRAPEZE-NETWORKS-PORT-MIB::trpzPortMib,,,,,,Port information MIB. Copyright 2006-2008 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.6.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortObjects,,,,,,
.1.3.6.1.4.1.14525.4.6.1.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortDataObjects,,,,,,
.1.3.6.1.4.1.14525.4.6.1.1.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigTable,,not-accessible,,current,,Port configuration table
.1.3.6.1.4.1.14525.4.6.1.1.1.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigEntry,,not-accessible,trpzPortConfigPortNumber,current,,Port configuration entry
.1.3.6.1.4.1.14525.4.6.1.1.1.1.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigPortNumber,Unsigned32,not-accessible,,current,,Physical Port Number
.1.3.6.1.4.1.14525.4.6.1.1.1.1.2,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigPortMode,INTEGER,read-only,,current,directAttachAP(1):networkPort(2):wired(3),Indicates whether this port is configured for directly attached AP, as network port, or for wired auth.
.1.3.6.1.4.1.14525.4.6.1.1.1.1.3,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigPoeMode,INTEGER,read-only,,current,poeEnable(1):poeDisable(2),Indicates whether this port is configured to  supply PoE (Power over Ethernet).
.1.3.6.1.4.1.14525.4.6.1.1.1.1.4,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigTrunkMaster,Unsigned32,read-only,,current,,The master port of the group this port belongs to (identified by the physical port number). A zero value means information is not available (usually if this port is not part of any port group).
.1.3.6.1.4.1.14525.4.6.1.2,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConformance,,,,,,
.1.3.6.1.4.1.14525.4.6.1.2.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortCompliances,,,,,,
.1.3.6.1.4.1.14525.4.6.1.2.1.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortCompliance,,,,,,The compliance statement for devices that implement the Port MIB.
.1.3.6.1.4.1.14525.4.6.1.2.2,TRAPEZE-NETWORKS-PORT-MIB::trpzPortGroups,,,,,,
.1.3.6.1.4.1.14525.4.6.1.2.2.1,TRAPEZE-NETWORKS-PORT-MIB::trpzPortConfigGroup,,,,,,Mandatory group of objects implemented to provide Port configuration info.
.1.3.6.1.4.1.14525.4.7,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerMib,,,,,,External Server configuration MIB. Copyright 2006-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.7.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerObjects,,,,,,
.1.3.6.1.4.1.14525.4.7.1.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerDataObjects,,,,,,
.1.3.6.1.4.1.14525.4.7.1.1.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSyslogTable,,not-accessible,,current,,Configured Syslog server table.
.1.3.6.1.4.1.14525.4.7.1.1.1.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSyslogEntry,,not-accessible,trpzExtServerSyslogIndex,current,,Entry for Syslog server table.
.1.3.6.1.4.1.14525.4.7.1.1.1.1.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSyslogIndex,Unsigned32,not-accessible,,current,,Index of the Syslog sever
.1.3.6.1.4.1.14525.4.7.1.1.1.1.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSyslogAddress,IpAddress,read-only,,current,,IP Address of the Syslog server.
.1.3.6.1.4.1.14525.4.7.1.1.1.1.3,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSyslogPort,Unsigned32,read-only,,current,,The Syslog server Port number.
.1.3.6.1.4.1.14525.4.7.1.1.1.1.4,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSyslogEnable,INTEGER,read-only,,current,enabled(1):disabled(2),The administrative status of the Syslog server (enabled/disabled)
.1.3.6.1.4.1.14525.4.7.1.1.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerGlobalObjects,,,,,,
.1.3.6.1.4.1.14525.4.7.1.1.2.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerPrimaryDnsIpAddress,IpAddress,read-only,,current,,Configured IP address of the Primary DNS Server.
.1.3.6.1.4.1.14525.4.7.1.1.2.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExtServerSecondaryDnsIpAddress,IpAddress,read-only,,current,,Configured IP address of the Secondary DNS Server.
.1.3.6.1.4.1.14525.4.7.1.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerConformance,,,,,,
.1.3.6.1.4.1.14525.4.7.1.2.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerCompliances,,,,,,
.1.3.6.1.4.1.14525.4.7.1.2.1.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerCompliance,,,,,,The compliance statement for devices that implement the External Server MIB. This compliance statement was for releases 6.0 to 7.3 of AC (wireless switch) software. This compliance statement is replaced by trpzExternalServerComplianceRev2.
.1.3.6.1.4.1.14525.4.7.1.2.1.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerComplianceRev2,,,,,,The compliance statement for devices that implement the External Server MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.7.1.2.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerGroups,,,,,,
.1.3.6.1.4.1.14525.4.7.1.2.2.1,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerConfigGroup,,,,,,Mandatory group of objects implemented to provide External Server configuration info.
.1.3.6.1.4.1.14525.4.7.1.2.2.2,TRAPEZE-NETWORKS-EXTERNAL-SERVER-MIB::trpzExternalServerDnsServerGroup,,,,,,Group of objects implemented to provide DNS Server configuration info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.8,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSystemMib,,,,,,System objects for Trapeze Networks wireless switches. Copyright 2007 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.8.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysObjects,,,,,,
.1.3.6.1.4.1.14525.4.8.1.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysDataObjects,,,,,,
.1.3.6.1.4.1.14525.4.8.1.1.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryUsedBytes,Unsigned32,read-only,,obsolete,,CPU memory used in bytes. Obsoleted by trpzSysCpuMemoryInstantUsage.
.1.3.6.1.4.1.14525.4.8.1.1.2,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryTotalBytes,Unsigned32,read-only,,obsolete,,CPU total physical memory in bytes. Obsoleted by trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.3,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysFlashMemoryUsedBytes,Unsigned32,read-only,,current,,Flash memory used in bytes.
.1.3.6.1.4.1.14525.4.8.1.1.4,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysFlashMemoryTotalBytes,Unsigned32,read-only,,current,,Flash memory available in bytes.
.1.3.6.1.4.1.14525.4.8.1.1.5,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuAverageLoad,Unsigned32,read-only,,current,,CPU load average since system startup.
.1.3.6.1.4.1.14525.4.8.1.1.6,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemorySize,Unsigned32,read-only,,current,,Maximum available CPU Memory (RAM) in KBytes. This is the memory available to the Wireless Switch software. May be less than physical RAM size.
.1.3.6.1.4.1.14525.4.8.1.1.11,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuLoadDetail,,,,,,
.1.3.6.1.4.1.14525.4.8.1.1.11.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuInstantLoad,Unsigned32,read-only,,current,,CPU instant load (for last few seconds).
.1.3.6.1.4.1.14525.4.8.1.1.11.2,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuLastMinuteLoad,Unsigned32,read-only,,current,,CPU load for last minute.
.1.3.6.1.4.1.14525.4.8.1.1.11.3,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuLast5MinutesLoad,Unsigned32,read-only,,current,,CPU load for last 5 minutes.
.1.3.6.1.4.1.14525.4.8.1.1.11.4,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuLastHourLoad,Unsigned32,read-only,,current,,CPU load for last hour.
.1.3.6.1.4.1.14525.4.8.1.1.11.5,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuLastDayLoad,Unsigned32,read-only,,current,,CPU load for last day.
.1.3.6.1.4.1.14525.4.8.1.1.11.6,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuLast3DaysLoad,Unsigned32,read-only,,current,,CPU load for last 3 days.
.1.3.6.1.4.1.14525.4.8.1.1.12,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryUsageDetail,,,,,,
.1.3.6.1.4.1.14525.4.8.1.1.12.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryInstantUsage,Unsigned32,read-only,,current,,Instant memory usage (RAM) in KBytes (for last few seconds). Ranges between 0 and trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.12.2,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryLastMinuteUsage,Unsigned32,read-only,,current,,Memory usage (RAM) for last minute in KBytes. Ranges between 0 and trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.12.3,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryLast5MinutesUsage,Unsigned32,read-only,,current,,Memory usage (RAM) for last 5 minutes in KBytes. Ranges between 0 and trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.12.4,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryLastHourUsage,Unsigned32,read-only,,current,,Memory usage (RAM) for last hour in KBytes. Ranges between 0 and trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.12.5,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryLastDayUsage,Unsigned32,read-only,,current,,Memory usage (RAM) for last day in KBytes. Ranges between 0 and trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.12.6,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysCpuMemoryLast3DaysUsage,Unsigned32,read-only,,current,,Memory usage (RAM) for last 3 days in KBytes. Ranges between 0 and trpzSysCpuMemorySize.
.1.3.6.1.4.1.14525.4.8.1.1.13,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysChassisComponents,,,,,,
.1.3.6.1.4.1.14525.4.8.1.1.13.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysChasCompPowerSupplies,,,,,,
.1.3.6.1.4.1.14525.4.8.1.1.13.1.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysNumPowerSuppliesSupported,Unsigned32,read-only,,current,,The number of power supplies supported by the Wireless Switch. This is the upper limit of the number of entries in the power supply table, trpzSysPowerSupplyTable.
.1.3.6.1.4.1.14525.4.8.1.1.13.1.2,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysPowerSupplyTable,,not-accessible,,current,,Table of power supplies actually installed on the Wireless Switch.
.1.3.6.1.4.1.14525.4.8.1.1.13.1.2.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysPowerSupplyEntry,,not-accessible,trpzSysPowerSupplyDeviceOID,current,,An entry in the trpzSysPowerSupplyTable table.
.1.3.6.1.4.1.14525.4.8.1.1.13.1.2.1.1,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysPowerSupplyDeviceOID,OBJECT,not-accessible,,current,,OID value used to identify this chassis component as indicated in Registration MIB.
.1.3.6.1.4.1.14525.4.8.1.1.13.1.2.1.2,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysPowerSupplyStatus,INTEGER,read-only,,current,other(1):unknown(2):ac-failed(3):dc-failed(4):ac-ok-dc-ok(5),Status of the power supply.
.1.3.6.1.4.1.14525.4.8.1.1.13.1.2.1.3,TRAPEZE-NETWORKS-SYSTEM-MIB::trpzSysPowerSupplyDescr,OCTET,read-only,,current,,A human interpretable description of this power supply, for example 'Left Power Supply'.
.1.3.6.1.4.1.14525.4.9,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectMib,,,,,,RF Detect MIB. Copyright 2007-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.9.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectObjects,,,,,,
.1.3.6.1.4.1.14525.4.9.1.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectDataObjects,,,,,,
.1.3.6.1.4.1.14525.4.9.1.1.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrTable,,not-accessible,,current,,Transmitter table. May contain tens of thousands of entries (different Transmitter-Listener-Channel combinations).
.1.3.6.1.4.1.14525.4.9.1.1.1.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrEntry,,not-accessible,trpzInfoRFDetectXmtrTransmitterMacAddress:trpzInfoRFDetectXmtrListenerMacAddress:trpzInfoRFDetectXmtrChannelNum,current,,Transmitter-Listener-Channel combination.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrTransmitterMacAddress,OCTET,not-accessible,,current,,The MAC Address of this Transmitter.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrListenerMacAddress,OCTET,not-accessible,,current,,The MAC Address of this Listener.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.3,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrChannelNum,Unsigned32,not-accessible,,current,,Channel Number this transmitter was using when this listener detected it.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.4,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrRssi,Integer32,read-only,,current,,Received Signal Strength Indicator at this listener.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.5,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrSsid,OCTET,read-only,,current,,The service/SSID name this transmitter was using. Zero-length string when unknown or not applicable.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.6,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrNetworkingMode,INTEGER,read-only,,current,ad-hoc(1):infrastructure(2),The way this transmitter is doing wireless networking: ad-hoc mode networking or infrastructure mode networking.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.7,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrClassification,INTEGER,read-only,,current,other(1):not-classified(2):member(3):neighbor(4):suspect(5):rogue(6):tag(7),The RF classification of this transmitter.
.1.3.6.1.4.1.14525.4.9.1.1.1.1.8,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrClassificationReason,INTEGER,read-only,,current,other(1):default-classification(2):rogue-list(3):ap-in-modo(4):neighbor-list(5):ssid-masquerade(6):seen-in-network(7):ad-hoc(8):ssid-list(9):pass-fingerprint(10):fail-fingerprint(11),The reason why this transmitter was classified by RF detection the way it is.
.1.3.6.1.4.1.14525.4.9.1.1.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectCurrentXmtrTableSize,Gauge32,read-only,,current,,Current number of Transmitter-Listener-Channel combinations found and recorded by RF detection.
.1.3.6.1.4.1.14525.4.9.1.1.3,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientTable,,not-accessible,,current,,Client table, including RFID tags. Contains Client-Listener combinations.
.1.3.6.1.4.1.14525.4.9.1.1.3.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientEntry,,not-accessible,trpzInfoRFDetectClientMacAddress:trpzInfoRFDetectClientListenerMacAddress,current,,Information about a particular Client, as it was detected by a particular listener (AP radio).
.1.3.6.1.4.1.14525.4.9.1.1.3.1.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientMacAddress,OCTET,not-accessible,,current,,The MAC Address of this Client.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientListenerMacAddress,OCTET,not-accessible,,current,,The MAC Address of this Listener (AP radio).
.1.3.6.1.4.1.14525.4.9.1.1.3.1.3,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientConnectedBssid,OCTET,read-only,,current,,The service MAC address (a.k.a. BSSID) this Client was Connected to when last detected by this listener. If this information is not available, the value will be 0:0:0:0:0:0.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.4,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientApNum,Unsigned32,read-only,,current,,Number of the AP (listener) that detected this Client.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.5,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientApRadioIndex,Unsigned32,read-only,,current,,Number of the AP Radio (listener) that detected this Client.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.6,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientModulation,INTEGER,read-only,,current,dot11Unknown(1):dot11Other(2):dot11A(3):dot11B(4):dot11G(5):dot11NA(6):dot11NG(7),802.11 Modulation standard this Client was using when last detected by this listener (a, b, g, n/a, n/g).
.1.3.6.1.4.1.14525.4.9.1.1.3.1.7,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientChannelNum,Unsigned32,read-only,,current,,Channel Number this Client was using when last detected by this listener.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.8,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientRate,INTEGER,read-only,,current,rateUnknown(1):rate1(2):rate2(3):rate5-5(4):rate6(5):rate9(6):rate11(7):rate12(8):rate18(9):rate24(10):rate36(11):rate48(12):rate54(13):rateMCS0(20):rateMCS1(21):rateMCS2(22):rateMCS3(23):rateMCS4(24):rateMCS5(25):rateMCS6(26):rateMCS7(27):rateMCS8(28):rateMCS9(29):rateMCS10(30):rateMCS11(31):rateMCS12(32):rateMCS13(33):rateMCS14(34):rateMCS15(35):rateMCS16(36):rateMCS17(37):rateMCS18(38):rateMCS19(39):rateMCS20(40):rateMCS21(41):rateMCS22(42):rateMCS23(43),Packet data rate this Client was using when last detected by this listener.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.9,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientRssi,Integer32,read-only,,current,,Received Signal Strength Indicator for this Client when last detected by this listener.
.1.3.6.1.4.1.14525.4.9.1.1.3.1.10,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientClassification,INTEGER,read-only,,current,other(1):not-classified(2):member(3):neighbor(4):suspect(5):rogue(6):tag(7),The RF classification of this Client.
.1.3.6.1.4.1.14525.4.9.1.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectConformance,,,,,,
.1.3.6.1.4.1.14525.4.9.1.2.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectCompliances,,,,,,
.1.3.6.1.4.1.14525.4.9.1.2.1.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectCompliance,,,,,,The compliance statement for devices that implement the RF Detect MIB. This compliance statement is for releases 6.0 to 7.6 of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.9.1.2.1.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectComplianceRev2,,,,,,The compliance statement for devices that implement the RF Detect MIB. This compliance statement is for releases 7.7 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.9.1.2.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectGroups,,,,,,
.1.3.6.1.4.1.14525.4.9.1.2.2.1,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrGroup,,,,,,Mandatory group of objects implemented to provide RF Detect Transmitter info.
.1.3.6.1.4.1.14525.4.9.1.2.2.2,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectXmtrClassificationGroup,,,,,,Group of objects implemented to provide RF Detect Classification info. Introduced in 6.2 release.
.1.3.6.1.4.1.14525.4.9.1.2.2.3,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectCurrentXmtrTableSizeGroup,,,,,,Group for one object that provides the current number of Transmitter-Listener-Channel combinations found and recorded by RF detection. Introduced in 6.2 release.
.1.3.6.1.4.1.14525.4.9.1.2.2.4,TRAPEZE-NETWORKS-INFO-RF-DETECT-MIB::trpzInfoRFDetectClientGroup,,,,,,Mandatory group of objects implemented to provide RF Detect Client info in releases 7.7 and greater.
.1.3.6.1.4.1.14525.4.10,TRAPEZE-NETWORKS-CLIENT-SESSION-TC::trpzClientSessionTc,,,,,,Textual Conventions used by Trapeze Networks wireless switches. Copyright 2006-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.11,TRAPEZE-NETWORKS-RF-DETECT-TC::trpzRFDetectTc,,,,,,Textual Conventions used by Trapeze Networks wireless switches. Copyright 2007-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.12,TRAPEZE-NETWORKS-BASIC-TC::trpzBasicTc,,,,,,Textual Conventions used by Trapeze Networks wireless switches. Copyright 2008 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.13,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogMib,,,,,,Trap Log MIB: information about most recent traps generated by an Access Controller (wireless switch). A trap occurrence that could be logged corresponds to an event detected by the Access Controller (wireless switch). Not all kinds of events will cause a Trap Log entry to be added. The list of accepted notification types should be configurable. This MIB does _not_ specify any means for configuring the notification types accepted for logging (the ''filter''). Configuration options for filtering (not necessarily SNMP-based) should be described in the manuals for the wireless switch. There is _no_ guarantee that the Trap Log will be preserved in part or in total across restarts of the SNMP agent. The Trap Log as a whole operates like a circular buffer: if adding a new entry (trap occurrence) would exhaust the available resources, the oldest entry (or entries) will be discarded. This MIB does _not_ specify any means for configuring any of the resource limits applicable to trap logging. Copyright 2009 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.13.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.13.1.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogGuideObjects,,,,,,
.1.3.6.1.4.1.14525.4.13.1.2.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogOldestTrapIndex,Unsigned32,read-only,,current,,Index of the Oldest Trap occurrence currently stored in the Trap Log. This will be the first entry overwritten when the Trap Log gets full. A zero value means that no trap was logged yet (possibly because trap logging is disabled).
.1.3.6.1.4.1.14525.4.13.1.2.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogNewestTrapIndex,Unsigned32,read-only,,current,,Index of the Newest Trap occurrence currently stored in the Trap Log. A zero value means that no trap was logged yet (possibly because trap logging is disabled).
.1.3.6.1.4.1.14525.4.13.1.2.3,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogNewestTrapTime,TimeTicks,read-only,,current,,The value of sysUpTime when the latest entry was placed in the log. If the entry occurred before the most recent management system initialization this object value MUST be set to zero. If no trap was logged yet this object value MUST be set to zero. Otherwise should be same as the value of trpzTraplogTrapTime for the latest entry in trpzTraplogTrapTable, _if_ these objects were read at exactly same time.
.1.3.6.1.4.1.14525.4.13.1.2.4,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogNewestTrapDateAndTime,OCTET,read-only,,current,,The local date and time of the latest trap occurrence. Instantiated only by systems that have date and time capability. A value of '0000000000000000'H (all zeros, length 8 octets) means that no trap was logged yet (possibly because trap logging is disabled). Otherwise should be same as the value of trpzTraplogTrapDateAndTime for the latest entry in trpzTraplogTrapTable, _if_ these objects were read at exactly same time.
.1.3.6.1.4.1.14525.4.13.1.3,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapTable,,not-accessible,,current,,The main Trap Log table: contains the most recent traps generated. The index of the oldest entry is specified by trpzTraplogOldestTrapIndex and the index of the youngest entry is specified by trpzTraplogNewestTrapIndex. It is an implementation-specific matter whether entries in this table are preserved across initializations of the management system. In general one would expect that they are not. Note that keeping entries across initializations of the management system leads to some confusion with counters and TimeStamps, since both of those are based on sysUpTime, which resets on management initialization. In this situation, counters apply only after the reset and trpzTraplogTrapTime for entries made before the reset MUST be set to 0.
.1.3.6.1.4.1.14525.4.13.1.3.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapEntry,,not-accessible,trpzTraplogTrapIndex,current,,A Trap Log entry corresponds to a trap occurrence. Entries appear in this table when notifications occur and pass any filtering rules that may be configured on the switch. They are removed to make way for new entries due to lack of resources or when the configured limits are reached. If adding an entry would exceed the configured limits or system resources in general, the oldest entry (or entries) must be removed to make room for the new one. The index for an existing entry is not affected when a entry is added or removed from this table.
.1.3.6.1.4.1.14525.4.13.1.3.1.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapIndex,Unsigned32,not-accessible,,current,,A monotonically increasing integer for the sole purpose of indexing entries within this log. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1.
.1.3.6.1.4.1.14525.4.13.1.3.1.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapTime,TimeTicks,read-only,,current,,The value of sysUpTime when the entry was placed in the log. If the entry occurred before the most recent management system initialization this object value MUST be set to zero.
.1.3.6.1.4.1.14525.4.13.1.3.1.3,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapDateAndTime,OCTET,read-only,,current,,The local date and time when the entry was logged, instantiated only by systems that have date and time capability.
.1.3.6.1.4.1.14525.4.13.1.3.1.4,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapNotificationID,OBJECT,read-only,,current,,The NOTIFICATION-TYPE object identifier of the Notification that occurred.
.1.3.6.1.4.1.14525.4.13.1.3.1.5,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapNumVars,Unsigned32,read-only,,current,,The Number of Variable bindings that should have been logged (in trpzTraplogVarTable) for this trap occurrence.
.1.3.6.1.4.1.14525.4.13.1.4,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarTable,,not-accessible,,current,,The Trap Log detail table: Variable bindings for the currently stored trap occurrences (existing entries in trpzTraplogTrapTable).
.1.3.6.1.4.1.14525.4.13.1.4.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarEntry,,not-accessible,trpzTraplogVarTrapIndex:trpzTraplogVarIndex,current,,Trap Log Variable binding entry. Entries appear in this table when there are variables in the varbind list of a trap occurrence that is currently stored (has an entry in trpzTraplogTrapTable).
.1.3.6.1.4.1.14525.4.13.1.4.1.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarTrapIndex,Unsigned32,not-accessible,,current,,The index of a logged trap, see 'trpzTraplogTrapIndex' above.
.1.3.6.1.4.1.14525.4.13.1.4.1.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarIndex,Unsigned32,not-accessible,,current,,A monotonically increasing integer, starting at 1 for a given trpzTraplogTrapIndex, for indexing variables within the logged trap.
.1.3.6.1.4.1.14525.4.13.1.4.1.3,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarID,OBJECT,read-only,,current,,The variable's object identifier.
.1.3.6.1.4.1.14525.4.13.1.4.1.4,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarValueType,INTEGER,read-only,,current,counter32(1):unsigned32(2):timeTicks(3):integer32(4):ipAddress(5):octetString(6):objectId(7):counter64(8),The type of the value. One and only one of the value objects that follow must be instantiated, based on this type.
.1.3.6.1.4.1.14525.4.13.1.4.1.5,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarCounter32Val,Counter32,read-only,,current,,The value when trpzTraplogVarType is 'counter32'.
.1.3.6.1.4.1.14525.4.13.1.4.1.6,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarUnsigned32Val,Unsigned32,read-only,,current,,The value when trpzTraplogVarType is 'unsigned32'.
.1.3.6.1.4.1.14525.4.13.1.4.1.7,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarTimeTicksVal,TimeTicks,read-only,,current,,The value when trpzTraplogVarType is 'timeTicks'.
.1.3.6.1.4.1.14525.4.13.1.4.1.8,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarInteger32Val,Integer32,read-only,,current,,The value when trpzTraplogVarType is 'integer32'.
.1.3.6.1.4.1.14525.4.13.1.4.1.9,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarOctetStringVal,OCTET,read-only,,current,,The value when trpzTraplogVarType is 'octetString'.
.1.3.6.1.4.1.14525.4.13.1.4.1.10,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarIpAddressVal,IpAddress,read-only,,current,,The value when trpzTraplogVarType is 'ipAddress'. This is an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the trpzTraplogVarOctetStringVal column.
.1.3.6.1.4.1.14525.4.13.1.4.1.11,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarOidVal,OBJECT,read-only,,current,,The value when trpzTraplogVarType is 'objectId'.
.1.3.6.1.4.1.14525.4.13.1.4.1.12,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarCounter64Val,Counter64,read-only,,current,,The value when trpzTraplogVarType is 'counter64'.
.1.3.6.1.4.1.14525.4.13.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogConformance,,,,,,
.1.3.6.1.4.1.14525.4.13.2.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogCompliances,,,,,,
.1.3.6.1.4.1.14525.4.13.2.1.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogCompliance,,,,,,The compliance statement for devices that implement the Traplog MIB.
.1.3.6.1.4.1.14525.4.13.2.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogGroups,,,,,,
.1.3.6.1.4.1.14525.4.13.2.2.1,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogGuideGroup,,,,,,Mandatory group of global objects for managing the Trap Log.
.1.3.6.1.4.1.14525.4.13.2.2.2,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogGuideDateGroup,,,,,,Conditionally mandatory global objects for managing the Trap Log. This group is mandatory on systems that keep wall clock date and time and should not be implemented on systems that do not have a wall clock date.
.1.3.6.1.4.1.14525.4.13.2.2.3,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapGroup,,,,,,Mandatory group of objects implemented to provide info on Trap occurrences.
.1.3.6.1.4.1.14525.4.13.2.2.4,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogTrapDateGroup,,,,,,Conditionally mandatory Trap occurrence info. This group is mandatory on systems that keep wall clock date and time and should not be implemented on systems that do not have a wall clock date.
.1.3.6.1.4.1.14525.4.13.2.2.5,TRAPEZE-NETWORKS-TRAPLOG-MIB::trpzTraplogVarGroup,,,,,,Mandatory group of objects implemented to provide info on Variable bindings.
.1.3.6.1.4.1.14525.4.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigMib,,,,,,AP Configuration objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009-2013 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.14.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.14.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigTable,,not-accessible,,current,,A table describing all the APs currently configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.2.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigEntry,,not-accessible,trpzApConfApConfigApNum,current,,Configuration for a particular AP that could be attached to the AC.
.1.3.6.1.4.1.14525.4.14.1.2.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApNum,Unsigned32,not-accessible,,current,,The Number of this AP (administratively assigned).
.1.3.6.1.4.1.14525.4.14.1.2.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApAttachType,INTEGER,read-only,,current,directAttach(1):networkAttach(2),How this AP is attached to the AC (directly or via L2/L3 network).
.1.3.6.1.4.1.14525.4.14.1.2.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigPhysPortNum,Unsigned32,read-only,,current,,Identifies the physical port used to attach this AP. Only valid for directly attached APs, otherwise will be zero.
.1.3.6.1.4.1.14525.4.14.1.2.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApSerialNum,OCTET,read-only,,current,,The Serial Number used to identify this AP. Only valid for network attached APs, otherwise will be a zero length string.
.1.3.6.1.4.1.14525.4.14.1.2.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApModelName,OCTET,read-only,,current,,The Model name of this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigFingerprint,OCTET,read-only,,current,,The RSA key fingerprint configured on this AP (binary value: it is the MD5 hash of the public key of the RSA key pair). For directly attached APs the fingerprint is a zero length string.
.1.3.6.1.4.1.14525.4.14.1.2.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigBias,INTEGER,read-only,,current,high(1):low(2):sticky(3),Bias (high/low/sticky).
.1.3.6.1.4.1.14525.4.14.1.2.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApTimeout,Unsigned32,read-only,,current,,The communication timeout for this AP, in seconds.
.1.3.6.1.4.1.14525.4.14.1.2.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApName,OCTET,read-only,,deprecated,,The configured Name for this AP. Names longer than 16 characters will be truncated (example: 'APNamelongerthan16chars' will be shown as 'APNamelongertha~'). Deprecated by trpzApConfApConfigApName2, which allows AP Names longer than 16 characters.
.1.3.6.1.4.1.14525.4.14.1.2.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigContact,OCTET,read-only,,current,,The Contact information for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLocation,OCTET,read-only,,current,,The Location information for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigBlinkEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the LED blink mode is enabled on this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigForceImageDownloadEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether this AP is forced to always download an image from the AC upon boot.
.1.3.6.1.4.1.14525.4.14.1.2.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigFirmwareUpgradeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether automatic boot firmware upgrade is enabled on this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLocalSwitchingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether local switching is enabled on this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.16,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigPowerMode,INTEGER,read-only,,current,auto(1):high(2),The mode in which this AP is supplying power to its radios.
.1.3.6.1.4.1.14525.4.14.1.2.1.17,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLedMode,INTEGER,read-only,,current,auto(1):static(2):off(3),LED Mode (auto/static/off).
.1.3.6.1.4.1.14525.4.14.1.2.1.18,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigDescription,OCTET,read-only,,current,,The configured Description for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.19,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLldpMode,INTEGER,read-only,,current,disabled(1):tx(2),LLDP Mode (tx/disabled).
.1.3.6.1.4.1.14525.4.14.1.2.1.20,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLldpMedEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether LLDP-MED is enabled for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.21,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected,INTEGER,read-only,,current,true(1):false(2),Indicates whether LLDP-MED Extended Power via MDI TLV is selected for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.22,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLldpMedInventoryTlvSelected,INTEGER,read-only,,current,true(1):false(2),Indicates whether LLDP-MED Inventory TLV is selected for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.23,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApTunnelEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether AP to AP tunnels are enabled for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.24,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigDataSecurityEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Data Security is enabled for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.25,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigWanOutageModeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether WAN Outage (remote) Mode is enabled for this AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.26,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigWanOutageExtendedTimeout,Unsigned32,read-only,,current,,The duration for which the AP can stay in WAN outage mode, in hours. A value of zero means the AP can stay in outage mode indefinitely.
.1.3.6.1.4.1.14525.4.14.1.2.1.27,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigWanOutageEvaluationPeriod,Unsigned32,read-only,,current,,The AC connection Evaluation Period for APs in WAN Outage mode, in seconds.
.1.3.6.1.4.1.14525.4.14.1.2.1.28,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigRemoteSiteName,OCTET,read-only,,current,,The name of the remote site that the AP is part of. An empty string means that the AP is not part of any remote site.
.1.3.6.1.4.1.14525.4.14.1.2.1.29,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigPathMtu,Unsigned32,read-only,,current,,The configured Maximum Transmission Unit (in bytes) for communication between AP and AC. The value 0 means that the MTU was not administratively configured.
.1.3.6.1.4.1.14525.4.14.1.2.1.30,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigHighLatencyModeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the high-latency mode is enabled for the AP.
.1.3.6.1.4.1.14525.4.14.1.2.1.31,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigApName2,OCTET,read-only,,current,,The configured Name for this AP; defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). Deprecates trpzApConfApConfigApName.
.1.3.6.1.4.1.14525.4.14.1.2.1.32,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigCacheConfigEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the configuration of the AP is saved on the AP itself, so that it won't be lost after reboot. To enable this setting, the AP must have outage mode enabled.
.1.3.6.1.4.1.14525.4.14.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigTable,,not-accessible,,current,,A table describing the radios on all the APs currently configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.3.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigEntry,,not-accessible,trpzApConfRadioConfigApNum:trpzApConfRadioConfigRadioIndex,current,,Configuration for a particular Radio on a particular AP that could be attached to the AC.
.1.3.6.1.4.1.14525.4.14.1.3.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigApNum,Unsigned32,not-accessible,,current,,The Number of the AP (administratively assigned).
.1.3.6.1.4.1.14525.4.14.1.3.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigRadioIndex,Unsigned32,not-accessible,,current,,The number of this Radio on the AP.
.1.3.6.1.4.1.14525.4.14.1.3.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigRadioType,INTEGER,read-only,,current,typeUnknown(1):typeA(2):typeB(3):typeG(4):typeNA(5):typeNG(6),The configured Type of this radio (typeA, typeB, typeG, typeNA, typeNG)
.1.3.6.1.4.1.14525.4.14.1.3.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigRadioMode,INTEGER,read-only,,current,enabled(1):disabled(2):sentry(3),The configured Mode of this radio (enabled/disabled/sentry)
.1.3.6.1.4.1.14525.4.14.1.3.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigRadioProfileName,OCTET,read-only,,deprecated,,Identifies the Radio Profile to be applied this radio, by short name, as it appears in the legacy Radio Profile table (trpzApConfRadioProfileTable). Deprecated by trpzApConfRadioConfigRadioProfileName2, which allows Radio Profile Names longer than 16 characters.
.1.3.6.1.4.1.14525.4.14.1.3.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigChannel,Unsigned32,read-only,,current,,The configured Channel Number of this radio.
.1.3.6.1.4.1.14525.4.14.1.3.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigTxPower,Unsigned32,read-only,,current,,The configured Tx Power level of this radio.
.1.3.6.1.4.1.14525.4.14.1.3.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigAutoTuneMaxTxPower,Unsigned32,read-only,,obsolete,,The Maximum Tx Power that Auto Tune is allowed to set for this radio. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.3.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigAntennaType,OCTET,read-only,,current,,The configured Antenna Type for this radio.
.1.3.6.1.4.1.14525.4.14.1.3.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigAntennaLocation,INTEGER,read-only,,current,indoors(1):outdoors(2),The configured Antenna Location for this radio.
.1.3.6.1.4.1.14525.4.14.1.3.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigLoadBalancingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether RF Load Balancing is enabled on this radio.
.1.3.6.1.4.1.14525.4.14.1.3.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigLoadBalancingGroup,OCTET,read-only,,current,,Indicates the RF Load Balancing group that this radio is assigned to.
.1.3.6.1.4.1.14525.4.14.1.3.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigLoadRebalancingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether RF Load Rebalancing is enabled for this radio.
.1.3.6.1.4.1.14525.4.14.1.3.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigRadioProfileName2,OCTET,read-only,,current,,Identifies the Radio Profile to be applied to this radio. Deprecates trpzApConfRadioConfigRadioProfileName.
.1.3.6.1.4.1.14525.4.14.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateConfigTable,,not-accessible,,current,,A table describing all the AP Templates currently configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.4.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateConfigEntry,,not-accessible,trpzApConfApTemplConfApTemplateName,current,,Template configuration for APs that could be attached to the AC.
.1.3.6.1.4.1.14525.4.14.1.4.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfApTemplateName,OCTET,not-accessible,,current,,AP Template Name.
.1.3.6.1.4.1.14525.4.14.1.4.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfApTemplateEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether this AP Template is Enabled (can be used for bringing up APs).
.1.3.6.1.4.1.14525.4.14.1.4.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfBias,INTEGER,read-only,,current,high(1):low(2):sticky(3),Bias (high/low/sticky).
.1.3.6.1.4.1.14525.4.14.1.4.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfApTimeout,Unsigned32,read-only,,current,,The communication timeout for this AP Template, in seconds.
.1.3.6.1.4.1.14525.4.14.1.4.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfBlinkEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the LED blink mode is enabled on this AP Template.
.1.3.6.1.4.1.14525.4.14.1.4.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfForceImageDownloadEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether this AP is forced to always download an image from the AC upon boot.
.1.3.6.1.4.1.14525.4.14.1.4.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfFirmwareUpgradeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether automatic boot firmware upgrade is enabled on this AP Template.
.1.3.6.1.4.1.14525.4.14.1.4.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfLocalSwitchingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether local switching is enabled on this AP Template.
.1.3.6.1.4.1.14525.4.14.1.4.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfPowerMode,INTEGER,read-only,,current,auto(1):high(2),The mode in which an AP using this Template will be supplying power to its radios.
.1.3.6.1.4.1.14525.4.14.1.4.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplConfLedMode,INTEGER,read-only,,current,auto(1):static(2):off(3),The LED Mode (auto/static/off) for an AP using this Template.
.1.3.6.1.4.1.14525.4.14.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateRadioConfigTable,,not-accessible,,current,,A table describing the radios for all the AP Templates currently configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.5.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateRadioConfigEntry,,not-accessible,trpzApConfApTemRadioConfApTemplateName:trpzApConfApTemRadioConfRadioIndex,current,,Template configuration for a particular Radio index on an AP Template configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.5.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfApTemplateName,OCTET,not-accessible,,current,,AP Template Name.
.1.3.6.1.4.1.14525.4.14.1.5.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfRadioIndex,Unsigned32,not-accessible,,current,,The number of this Radio on the AP Template.
.1.3.6.1.4.1.14525.4.14.1.5.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfRadioMode,INTEGER,read-only,,current,enabled(1):disabled(2):sentry(3),The configured mode of a radio using this Template (enabled/disabled/sentry)
.1.3.6.1.4.1.14525.4.14.1.5.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfRadioProfileName,OCTET,read-only,,deprecated,,Identifies the Radio Profile to be applied to a radio using this Template, by short name, as it appears in the legacy Radio Profile table (trpzApConfRadioProfileTable). Deprecated by trpzApConfApTemRadioConfRadioProfileName2, which allows Radio Profile Names longer than 16 characters.
.1.3.6.1.4.1.14525.4.14.1.5.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfAutoTuneMaxTxPower,Unsigned32,read-only,,obsolete,,The Maximum Tx Power that Auto Tune will be allowed to set for a radio using this Template. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.5.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfLoadBalancingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether RF Load Balancing will be enabled on a radio using this Template.
.1.3.6.1.4.1.14525.4.14.1.5.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfLoadBalancingGroup,OCTET,read-only,,current,,Indicates the RF Load Balancing group that a radio using this Template will be assigned to.
.1.3.6.1.4.1.14525.4.14.1.5.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfLoadRebalancingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether RF Load Rebalancing will be enabled for a radio using this Template.
.1.3.6.1.4.1.14525.4.14.1.5.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemRadioConfRadioProfileName2,OCTET,read-only,,current,,Identifies the Radio Profile to be applied to a radio using this Template. Deprecates trpzApConfApTemRadioConfRadioProfileName.
.1.3.6.1.4.1.14525.4.14.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileTable,,not-accessible,,deprecated,,A table describing the Radio Profiles currently configured on this AC. Deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileEntry,,not-accessible,trpzApConfRadioProfRadioProfileName,deprecated,,Configuration for a particular Radio Profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRadioProfileName,OCTET,not-accessible,,deprecated,,Name of this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfBeaconInterval,Unsigned32,read-write,,deprecated,,Beacon Interval, time in thousandths of a second, for this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfDtimInterval,Unsigned32,read-only,,deprecated,,The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfChannelWidth11na,INTEGER,read-only,,deprecated,channelWidth20MHz(1):channelWidth40MHz(2),802.11n Channel Width for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfMaxTxLifetime,Unsigned32,read-only,,deprecated,,The maximum transmit threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfMaxRxLifetime,Unsigned32,read-only,,deprecated,,The maximum receive threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRtsThreshold,Unsigned32,read-write,,deprecated,,The RTS threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfFragThreshold,Unsigned32,read-write,,deprecated,,The fragmentation threshold for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfLongXmitPreambleEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCountermeasuresMode,INTEGER,read-only,,deprecated,none(1):all(2):rogue(3):configured(4),Countermeasures Mode for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRFScanMode,INTEGER,read-only,,deprecated,active(1):passive(2),RF Scanning Mode for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRFScanChannelScope,INTEGER,read-only,,deprecated,operating(1):regulatory(2):all(3),RF scanning Channel Scope for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRFScanCTSEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTune11aChannelRange,INTEGER,read-only,,obsolete,all-bands(1):lower-bands(2),The allowable 802.11a Channel Range used by Auto-Tune for the AP radios using this radio profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.6.1.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTuneIgnoreClientsEnabled,INTEGER,read-only,,obsolete,true(1):false(2),Indicates whether the AP radios using this radio profile Ignore Client connections in Auto-Tune channel selections. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.6.1.16,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTuneChannelEnabled,INTEGER,read-only,,obsolete,true(1):false(2),Indicates whether Channel Auto-Tuning is enabled for the AP radios using this radio profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.6.1.17,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTuneChannelHolddownInterval,Unsigned32,read-only,,obsolete,,Minimum Interval (in seconds) between Channel changes due to Auto-Tuning, for the AP radios using this radio profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.6.1.18,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTuneChannelChangeInterval,Unsigned32,read-only,,obsolete,,The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Channel for the AP radios using this radio profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.6.1.19,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTunePowerEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.20,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTunePowerRampInterval,Unsigned32,read-only,,deprecated,,Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.21,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfAutoTunePowerChangeInterval,Unsigned32,read-only,,deprecated,,The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.22,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfFairQueuingEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether weighted Fair Queuing is enabled for this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.23,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacBackgroundACMandatory,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.24,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacBackgroundMaxUtilization,Unsigned32,read-only,,deprecated,,Maximum admission control limit for Background traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.25,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacBackgroundPolicingEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.26,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacBestEffortACMandatory,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.27,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacBestEffortMaxUtilization,Unsigned32,read-only,,deprecated,,Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.28,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacBestEffortPolicingEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.29,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacVideoACMandatory,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.30,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacVideoMaxUtilization,Unsigned32,read-only,,deprecated,,Maximum admission control limit for Video traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.31,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacVideoPolicingEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.32,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacVoiceACMandatory,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.33,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacVoiceMaxUtilization,Unsigned32,read-only,,deprecated,,Maximum admission control limit for Voice traffic, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.34,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfCacVoicePolicingEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.35,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRfidTagEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.36,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfWmmPowerSaveEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether the AP radios using this radio profile enable power save mode on WMM clients. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.37,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRateEnforcementEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.38,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfDfsChannelsEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.39,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRFSpectralScanModeEnabled,INTEGER,read-only,,deprecated,true(1):false(2),Indicates whether Spectral Scanning Mode is enabled for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.40,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRFSpectralScanPriority,INTEGER,read-only,,deprecated,data-first(1):scan-first(2),The Priority when a Spectral Scan sample time arrives for the AP radios using this radio profile. This table (trpzApConfRadioProfileTable) has been deprecated by trpzApConfRadioProfile32Table, whose index may be up to 32 characters long.
.1.3.6.1.4.1.14525.4.14.1.6.1.41,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfRadioProfileFullName,OCTET,read-only,,deprecated,,The full name of the Radio Profile. Indicates the entry in the new Radio Profile table (trpzApConfRadioProfile32Table).
.1.3.6.1.4.1.14525.4.14.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfServiceProfileTable,,not-accessible,,deprecated,,A table describing the currently configured connections between Radio Profiles and Service Profiles. Deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.7.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfServiceProfileEntry,,not-accessible,trpzApConfRpServpRadioProfileName:trpzApConfRpServpServiceProfileName,deprecated,,Connection between a Radio Profile and a Service Profile, currently configured on the AC. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.7.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRpServpRadioProfileName,OCTET,not-accessible,,deprecated,,Name of this Radio Profile. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.7.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRpServpServiceProfileName,OCTET,not-accessible,,deprecated,,Name of a Service Profile connected to this Radio Profile. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.7.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRpServpRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. This table (trpzApConfRadioProfServiceProfileTable) has been deprecated by trpzApConfRadioProf32ServiceProfileTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfSnoopFilterTable,,not-accessible,,deprecated,,A table describing the currently configured connections between Radio Profiles and Snoop Filters. Deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.8.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfSnoopFilterEntry,,not-accessible,trpzApConfRpSnoopfRadioProfileName:trpzApConfRpSnoopfSnoopFilterName,deprecated,,Connection between a Radio Profile and a Snoop Filter, currently configured on the AC. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.8.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRpSnoopfRadioProfileName,OCTET,not-accessible,,deprecated,,Name of this Radio Profile. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.8.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRpSnoopfSnoopFilterName,OCTET,not-accessible,,deprecated,,Name of a Snoop Filter connected to this Radio Profile. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.8.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRpSnoopfRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted. This table (trpzApConfRadioProfSnoopFilterTable) has been deprecated by trpzApConfRadioProf32SnoopFilterTable, which allows 32 characters long Radio Profile Names in the index.
.1.3.6.1.4.1.14525.4.14.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServiceProfileTable,,not-accessible,,current,,A table describing the Service Profiles currently configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.9.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServiceProfileEntry,,not-accessible,trpzApConfServProfServiceProfileName,current,,Configuration for a particular Service Profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfServiceProfileName,OCTET,not-accessible,,current,,Name of this service profile
.1.3.6.1.4.1.14525.4.14.1.9.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSsidType,INTEGER,read-only,,current,clear(1):crypto(2),The type of this service profile (clear/crypto).
.1.3.6.1.4.1.14525.4.14.1.9.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfBeaconEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether beacons are enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProf11naMode,INTEGER,read-only,,current,enable(1):disable(2):required(3),Indicates the 802.11n (na) mode for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProf11ngMode,INTEGER,read-only,,current,enable(1):disable(2):required(3),Indicates the 802.11n (ng) mode for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProf11nShortGuardIntervalEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether short guard interval is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProf11nFrameAggregation,INTEGER,read-only,,current,msdu(1):mpdu(2):all(3):disable(4),Indicates the Frame Aggregation mode for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProf11nMsduMaxLength,INTEGER,read-only,,current,msdu-4k(1):msdu-8k(2),The maximum MSDU length for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProf11nMpduMaxLength,INTEGER,read-only,,current,mpdu-8k(1):mpdu-16k(2):mpdu-32k(3):mpdu-64k(4),The maximum MPDU length for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfAuthFallthru,INTEGER,read-only,,current,none(1):web-auth(2):web-aaa-portal(3):last-resort(4),The authentication type to be attempted for users who do not match a 802.1X or MAC authentication rule, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWebAAAForm,OCTET,read-only,,current,,The custom login page that loads for WebAAA users, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSharedKeyAuthEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether shared-key authentication is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether WPA IE beaconing is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeCipherTkipEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether TKIP cipher is advertised in WPA IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeCipherCcmpEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether CCMP cipher is advertised in WPA IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.16,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeCipherWep40Enabled,INTEGER,read-only,,obsolete,true(1):false(2),Indicates whether WEP-40 cipher is advertised in WPA IE, for this service profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.9.1.17,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeCipherWep104Enabled,INTEGER,read-only,,obsolete,true(1):false(2),Indicates whether WEP-104 cipher is advertised in WPA IE, for this service profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.9.1.18,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeAuthDot1xEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether 802.1X authentication is advertised in WPA IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.19,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWpaIeAuthPskEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Pre-Shared Key authentication is advertised in WPA IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.20,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether RSN IE beaconing is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.21,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeCipherTkipEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether TKIP cipher is advertised in RSN IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.22,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeCipherCcmpEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether CCMP cipher is advertised in RSN IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.23,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeCipherWep40Enabled,INTEGER,read-only,,obsolete,true(1):false(2),Indicates whether WEP-40 cipher is advertised in RSN IE, for this service profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.9.1.24,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeCipherWep104Enabled,INTEGER,read-only,,obsolete,true(1):false(2),Indicates whether WEP-104 cipher is advertised in RSN IE, for this service profile. Obsoleted: not supported anymore.
.1.3.6.1.4.1.14525.4.14.1.9.1.25,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeAuthDot1xEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether 802.1X authentication is advertised in RSN IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.26,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfRsnIeAuthPskEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Pre-Shared Key authentication is advertised in RSN IE, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.27,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfTkipMicCountermeasuresTime,Unsigned32,read-only,,current,,Indicates the TKIP MIC countermeasures time in milliseconds for this service profile. This is the length of time that AP radios use countermeasures if two Message Integrity Code (MIC) failures occur within 60 seconds.
.1.3.6.1.4.1.14525.4.14.1.9.1.28,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfMaxBandwidthKbps,Unsigned32,read-only,,current,,The bandwidth limit for this service profile, in Kbits/second. A value of zero means unlimited.
.1.3.6.1.4.1.14525.4.14.1.9.1.29,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfCacMode,INTEGER,read-only,,current,none(1):session(2):vendor(3),The Call Admission Control (CAC) mode, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.30,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfCacSessCount,Unsigned32,read-only,,current,,The maximum number of active sessions a radio can have when session-based CAC is enabled, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.31,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfUserIdleTimeout,Unsigned32,read-only,,current,,The number of seconds MSS has a session available for a client not sending data and is not responding to keepalives (idle-client probes). If the timer expires, the client session is changed to the Dissociated state, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.32,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfIdleClientProbingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the AC radio sends a unicast null-data frame to each client every 10 seconds, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.33,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfShortRetryCount,Unsigned32,read-only,,current,,The number of times a radio can send a short unicast frame without receiving an acknowledgment, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.34,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfLongRetryCount,Unsigned32,read-only,,current,,The number of times a radio can send a long unicast frame without receiving an acknowledgment, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.35,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfProxyArpEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether proxy ARP is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.36,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfDhcpRestrictEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether only DHCP traffic is allowed until a newly associated client has been authenticated and authorized, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.37,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfNoBroadcastEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether broadcast ARP and DHCP packets are converted to unicast for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.38,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSygateOnDemandEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Sygate On-Demand Manager (SODA Manager) is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.39,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfEnforceChecksEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Enforcement of the SODA security checks is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.40,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSodaRemediationAcl,OCTET,read-only,,current,,Remediation page ACL to apply to the client when the  failure page is loaded, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.41,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSodaSuccessPage,OCTET,read-only,,current,,Success page that is displayed on the client when a client successfully runs the checks performed by the SODA agent, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.42,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSodaFailurePage,OCTET,read-only,,current,,Failure page that is displayed on the client when the SODA agent checks fail, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.43,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSodaLogoutPage,OCTET,read-only,,current,,The page to load when a client closes the SODA virtual desktop and logs out of the network, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.44,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfSodaAgentDirectory,OCTET,read-only,,current,,Specifies a different directory for the SODA agent files used for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.45,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWebPortalSessionTimeout,Unsigned32,read-only,,current,,Time interval, in seconds, for which a Web Portal WebAAA session remains in the Deassociated state  before being terminated automatically, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.46,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWebPortalAcl,OCTET,read-only,,current,,Name of ACL used for filtering traffic for Web Portal  users during authentication, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.47,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWebPortalLogoutEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the Web Portal logout functionality is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.48,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWebPortalLogoutUrl,OCTET,read-only,,current,,Indicates the Web Portal Logout URL for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.49,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfKeepInitialVlanEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether, after roaming, the user keeps the VLAN assigned from the first connection, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.50,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfMeshModeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether wireless mesh between APs is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.51,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfBridgingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether wireless bridging of traffic between APs is enabled for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.52,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfLoadBalanceExemptEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether this service profile is exempted from load balancing.
.1.3.6.1.4.1.14525.4.14.1.9.1.53,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfM2UConversionEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether multicast IPv4 traffic on the wire is converted to unicast traffic for the wireless clients, for this service profile.
.1.3.6.1.4.1.14525.4.14.1.9.1.54,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfBackupSsidMode,INTEGER,read-only,,current,disabled(1):outage-only(2):dual(3):always-on(4),Indicates the availability of backup SSIDs at a remote site. Backup SSIDs allow access to new clients when central site outage occurs.
.1.3.6.1.4.1.14525.4.14.1.9.1.55,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfBackupSsidTimeout,Unsigned32,read-only,,current,,Indicates how many seconds the backup SSIDs at a remote site will stay up after the outage ends. Value 0 means that the backup SSIDs will stay up indefinitely.
.1.3.6.1.4.1.14525.4.14.1.9.1.56,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfBackupSsidKeepClients,INTEGER,read-only,,current,true(1):false(2),Indicates whether the existing client sessions at a remote site will be kept or not when central site outage occurs.
.1.3.6.1.4.1.14525.4.14.1.9.1.57,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServProfWebPortalLogoutForm,OCTET,read-only,,current,,The custom logout page that will be displayed for Web Portal users, for this service profile. An empty string means that the default page will be displayed.
.1.3.6.1.4.1.14525.4.14.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterTable,,not-accessible,,current,,A table describing the Snoop Filters currently configured on this AC.
.1.3.6.1.4.1.14525.4.14.1.10.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterEntry,,not-accessible,trpzApConfSnoopFilterName,current,,Configuration for a particular Snoop Filter.
.1.3.6.1.4.1.14525.4.14.1.10.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterName,OCTET,not-accessible,,current,,Name of this snoop filter.
.1.3.6.1.4.1.14525.4.14.1.10.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether this snoop filter is enabled.
.1.3.6.1.4.1.14525.4.14.1.10.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterObserverAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzApConfSnoopFilterObserverAddr'. If no snoop observer is configured for a particular filter, this object will return 'unknown(0)' for that filter.
.1.3.6.1.4.1.14525.4.14.1.10.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterObserverAddr,OCTET,read-only,,current,,The IP address of the snoop observer. If no observer is configured for a particular snoop filter, this object will return an empty string for that filter. The type of this address is specified in 'trpzApConfSnoopFilterObserverAddrType'.
.1.3.6.1.4.1.14525.4.14.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioSnoopFilterTable,,not-accessible,,current,,A table describing the associations of Snoop Filters with AP radios.
.1.3.6.1.4.1.14525.4.14.1.11.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioSnoopFilterEntry,,not-accessible,trpzApConfRadioConfigApNum:trpzApConfRadioConfigRadioIndex:trpzApConfSnoopFilterName,current,,Multiple snoop filters can be associated with one AP radio. A snoop filter can be associated with multiple AP radios. A combination of an AP number, a radio number and a filter name uniquely identifies the mapping of a filter to a specific radio.
.1.3.6.1.4.1.14525.4.14.1.11.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioSnoopFilterRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted.
.1.3.6.1.4.1.14525.4.14.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverTable,,not-accessible,,current,,A table describing the snoop observers currently configured on the AC. Snoop observers are hosts where snooped packets are sent.
.1.3.6.1.4.1.14525.4.14.1.12.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverEntry,,not-accessible,trpzApConfSnoopObserverTargetAddrType:trpzApConfSnoopObserverTargetAddr,current,,The configuration of a particular snoop observer.
.1.3.6.1.4.1.14525.4.14.1.12.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverTargetAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzApConfSnoopObserverTargetAddr'.
.1.3.6.1.4.1.14525.4.14.1.12.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverTargetAddr,OCTET,not-accessible,,current,,The IP address of the snoop observer. The type of this address is specified in 'trpzApConfSnoopObserverTargetAddrType'.
.1.3.6.1.4.1.14525.4.14.1.12.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverSnapLength,Unsigned32,read-only,,current,,Indicates the maximum number of bytes from a filtered packet to be encapsulated in TZSP and sent to the observer. Value 0 means that the entire packet is copied and sent to the observer.
.1.3.6.1.4.1.14525.4.14.1.12.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverInterval,Unsigned32,read-only,,current,,Indicates the snooping interval, in milliseconds, for the packets with the same source. Value 0 means no rate limit.
.1.3.6.1.4.1.14525.4.14.1.12.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverTxMode,INTEGER,read-only,,current,tzsp(1):batched-tzsp(2),The mode of transmission of snoop packets to this observer.
.1.3.6.1.4.1.14525.4.14.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteTable,,not-accessible,,current,,A table describing the remote sites currently configured on the AC. A remote site is a group of APs situated in the same location (site/branch), other than the location of the controller.
.1.3.6.1.4.1.14525.4.14.1.13.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteEntry,,not-accessible,trpzApConfRemoteSiteName,current,,Description of a remote site currently configured on the AC.
.1.3.6.1.4.1.14525.4.14.1.13.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteName,OCTET,not-accessible,,current,,The name of the remote site.
.1.3.6.1.4.1.14525.4.14.1.13.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteCountryCode,OCTET,read-only,,current,,Indicates the country code used for the configuration of the APs at the remote site. The system country code is used by default, in which case this object will return the special value 'NONE'.
.1.3.6.1.4.1.14525.4.14.1.13.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSitePathMtu,Unsigned32,read-only,,current,,The configured MTU between the APs at the remote site and the ACs at the central site. The value 0 means that the MTU was not administratively configured.
.1.3.6.1.4.1.14525.4.14.1.13.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteBackupSsidsEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the backup SSIDs at this remote site are enabled or not. Backup SSIDs allow access to new clients when central site outage occurs.
.1.3.6.1.4.1.14525.4.14.1.13.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteLogServerEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the APs at the remote site will send syslog messages to a log server.
.1.3.6.1.4.1.14525.4.14.1.13.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteLogServerAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of 'trpzApConfRemoteSiteLogServerAddr'.
.1.3.6.1.4.1.14525.4.14.1.13.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteLogServerAddr,OCTET,read-only,,current,,The address of the log server used by the APs in the remote site. The type of this address is specified in 'trpzApConfRemoteSiteLogServerAddrType'.
.1.3.6.1.4.1.14525.4.14.1.13.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteLogServerPort,Unsigned32,read-only,,current,,The port number of the log server used by the APs in the remote site.
.1.3.6.1.4.1.14525.4.14.1.13.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteLogServerSeverity,INTEGER,read-only,,current,emergency(1):alert(2):critical(3):error(4):warning(5):notice(6):informational(7):debug(8),The minimum severity of the messages sent by the APs in the remote site to the syslog server.
.1.3.6.1.4.1.14525.4.14.1.13.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteAcPollingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the AC can poll the APs in this remote site to obtain full information about the AP-managed client sessions. When it is 'false(2)', the AC has limited information about the AP-managed sessions in this remote site.
.1.3.6.1.4.1.14525.4.14.1.13.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteRadiusServerGroupName,OCTET,read-only,,current,,Indicates the name of the group of RADIUS servers used in the remote site. An empty string means that no RADIUS server group has been configured for the remote site.
.1.3.6.1.4.1.14525.4.14.1.13.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteRadiusDeadtime,Unsigned32,read-only,,current,,The deadtime value configured for the RADIUS server group of this remote site. This value has precedence over the individual deadtime values of each server in the server group. If RADIUS deadtime is not configured for this remote site, this object will not have an instance in the current row.
.1.3.6.1.4.1.14525.4.14.1.13.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteRadiusTimeout,Unsigned32,read-only,,current,,The timeout value configured for the RADIUS server group of this remote site. This value has precedence over the individual timeout values of each server in the server group. If RADIUS timeout is not configured for this remote site, this object will not have an instance in the current row.
.1.3.6.1.4.1.14525.4.14.1.13.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteRadiusRetransmit,Unsigned32,read-only,,current,,The retransmit value configured for the RADIUS server group of this remote site. This value has precedence over the individual retransmit values of each server in the server group. If RADIUS retransmit is not configured for this remote site, this object will not have an instance in the current row.
.1.3.6.1.4.1.14525.4.14.1.13.1.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteRadiusNasIdType,INTEGER,read-only,,current,ap-name(1):ap-serial-id(2),The NAS-ID type configured for the RADIUS server group of this remote site.
.1.3.6.1.4.1.14525.4.14.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfile32Table,,not-accessible,,current,,A table describing the Radio Profiles currently configured on this AC. Deprecates trpzApConfRadioProfileTable.
.1.3.6.1.4.1.14525.4.14.1.14.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfile32Entry,,not-accessible,trpzApConfRadioProf32RadioProfileName,current,,Configuration for a particular Radio Profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RadioProfileName,OCTET,not-accessible,,current,,Name of this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32BeaconInterval,Unsigned32,read-only,,current,,Beacon Interval, time in thousandths of a second, for this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32DtimInterval,Unsigned32,read-only,,current,,The number of times after every beacon that each AP radio in a radio profile sends a delivery traffic indication map (DTIM), for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32ChannelWidth11na,INTEGER,read-only,,current,channelWidth20MHz(1):channelWidth40MHz(2),802.11n Channel Width for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32MaxTxLifetime,Unsigned32,read-only,,current,,The maximum transmit threshold for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32MaxRxLifetime,Unsigned32,read-only,,current,,The maximum receive threshold for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RtsThreshold,Unsigned32,read-only,,current,,The RTS threshold for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32FragThreshold,Unsigned32,read-only,,current,,The fragmentation threshold for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32LongXmitPreambleEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether an 802.11b/g AP radio using this radio profile transmits Long Preamble.
.1.3.6.1.4.1.14525.4.14.1.14.1.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CountermeasuresMode,INTEGER,read-only,,current,none(1):all(2):rogue(3):configured(4),Countermeasures Mode for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RFScanMode,INTEGER,read-only,,current,active(1):passive(2),RF Scanning Mode for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RFScanChannelScope,INTEGER,read-only,,current,operating(1):regulatory(2):all(3),RF scanning Channel Scope for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RFScanCTSEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the AP radios using this radio profile send CTS To Self packet before going off channel.
.1.3.6.1.4.1.14525.4.14.1.14.1.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32AutoTunePowerEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Power Auto-Tuning is enabled for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32AutoTunePowerRampInterval,Unsigned32,read-only,,current,,Minimum Interval (in seconds) between Power changes due to Auto-Tuning, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.16,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32AutoTunePowerChangeInterval,Unsigned32,read-only,,current,,The interval (in seconds) at which RF Auto-Tuning decides whether to Change the Power for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.17,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32FairQueuingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether weighted Fair Queuing is enabled for this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.18,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacBackgroundACMandatory,INTEGER,read-only,,current,true(1):false(2),Indicates whether Admission Control for Background traffic is Mandatory for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.19,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacBackgroundMaxUtilization,Unsigned32,read-only,,current,,Maximum admission control limit for Background traffic, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.20,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacBackgroundPolicingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates that admission control Policing for Background traffic is enabled, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.21,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacBestEffortACMandatory,INTEGER,read-only,,current,true(1):false(2),Indicates that Admission Control for Best Effort traffic is Mandatory for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.22,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacBestEffortMaxUtilization,Unsigned32,read-only,,current,,Maximum admission control limit for Best Effort traffic, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.23,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacBestEffortPolicingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates that admission control Policing for Best Effort traffic is enabled, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.24,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacVideoACMandatory,INTEGER,read-only,,current,true(1):false(2),Indicates that Admission Control for Video traffic is Mandatory for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.25,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacVideoMaxUtilization,Unsigned32,read-only,,current,,Maximum admission control limit for Video traffic, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.26,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacVideoPolicingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates that admission control Policing for Video traffic is enabled, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.27,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacVoiceACMandatory,INTEGER,read-only,,current,true(1):false(2),Indicates that Admission Control for Voice traffic is Mandatory for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.28,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacVoiceMaxUtilization,Unsigned32,read-only,,current,,Maximum admission control limit for Voice traffic, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.29,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32CacVoicePolicingEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates that admission control Policing for Voice traffic is enabled, for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.30,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RfidTagEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether an AP radio using this radio profile is enabled to function as location receivers in an AeroScout Visibility System.
.1.3.6.1.4.1.14525.4.14.1.14.1.31,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32WmmPowerSaveEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether the AP radios using this radio profile enable power save mode on WMM clients.
.1.3.6.1.4.1.14525.4.14.1.14.1.32,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RateEnforcementEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether data rates are enforced for the AP radios using this radio profile, which means that a connecting client must transmit at one of the mandatory or standard rates in order to associate with the AP.
.1.3.6.1.4.1.14525.4.14.1.14.1.33,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32DfsChannelsEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates that the AP radios using this radio profile use DFS channels to meet regulatory requirements.
.1.3.6.1.4.1.14525.4.14.1.14.1.34,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RFSpectralScanModeEnabled,INTEGER,read-only,,current,true(1):false(2),Indicates whether Spectral Scanning Mode is enabled for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.14.1.35,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32RFSpectralScanPriority,INTEGER,read-only,,current,data-first(1):scan-first(2),The Priority when a Spectral Scan sample time arrives for the AP radios using this radio profile.
.1.3.6.1.4.1.14525.4.14.1.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32ServiceProfileTable,,not-accessible,,current,,A table describing the currently configured connections between Radio Profiles and Service Profiles. Deprecates trpzApConfRadioProfServiceProfileTable.
.1.3.6.1.4.1.14525.4.14.1.15.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32ServiceProfileEntry,,not-accessible,trpzApConfRp32ServpRadioProfileName:trpzApConfRp32ServpServiceProfileName,current,,Connection between a Radio Profile and a Service Profile, currently configured on the AC.
.1.3.6.1.4.1.14525.4.14.1.15.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRp32ServpRadioProfileName,OCTET,not-accessible,,current,,Name of this Radio Profile.
.1.3.6.1.4.1.14525.4.14.1.15.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRp32ServpServiceProfileName,OCTET,not-accessible,,current,,Name of a Service Profile connected to this Radio Profile.
.1.3.6.1.4.1.14525.4.14.1.15.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRp32ServpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted.
.1.3.6.1.4.1.14525.4.14.1.16,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32SnoopFilterTable,,not-accessible,,current,,A table describing the currently configured connections between Radio Profiles and Snoop Filters. Deprecates trpzApConfRadioProfSnoopFilterTable.
.1.3.6.1.4.1.14525.4.14.1.16.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32SnoopFilterEntry,,not-accessible,trpzApConfRp32SnoopfRadioProfileName:trpzApConfRp32SnoopfSnoopFilterName,current,,Connection between a Radio Profile and a Snoop Filter, currently configured on the AC.
.1.3.6.1.4.1.14525.4.14.1.16.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRp32SnoopfRadioProfileName,OCTET,not-accessible,,current,,Name of this Radio Profile.
.1.3.6.1.4.1.14525.4.14.1.16.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRp32SnoopfSnoopFilterName,OCTET,not-accessible,,current,,Name of a Snoop Filter connected to this Radio Profile.
.1.3.6.1.4.1.14525.4.14.1.16.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRp32SnoopfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table. To create a row, set this object to 'createAndGo'. To delete a row, set this object to 'destroy'. Only these two values 'createAndGo' and 'destroy' will be accepted.
.1.3.6.1.4.1.14525.4.14.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigConformance,,,,,,
.1.3.6.1.4.1.14525.4.14.2.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigCompliances,,,,,,
.1.3.6.1.4.1.14525.4.14.2.1.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigCompliance,,,,,,The compliance statement for devices that implement AP Config MIB.
.1.3.6.1.4.1.14525.4.14.2.1.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigComplianceRev2,,,,,,The compliance statement for devices that implement AP Config MIB. This compliance statement is for releases 7.5 to 7.6 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev3.
.1.3.6.1.4.1.14525.4.14.2.1.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigComplianceRev3,,,,,,The compliance statement for devices that implement AP Config MIB. This compliance statement is for release 7.7 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev4.
.1.3.6.1.4.1.14525.4.14.2.1.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigComplianceRev4,,,,,,The compliance statement for devices that implement AP Config MIB. This compliance statement is for release 8.0 of AC (wireless switch) software. This compliance statement is replaced by trpzApConfigComplianceRev5.
.1.3.6.1.4.1.14525.4.14.2.1.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigComplianceRev5,,,,,,The compliance statement for devices that implement AP Config MIB. This compliance statement is for releases 9.0 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.14.2.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfigGroups,,,,,,
.1.3.6.1.4.1.14525.4.14.2.2.1,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigTableGroup,,,,,,Group of columnar objects implemented to provide AP Configuration info in releases 7.1 to 7.6. Replaced by trpzApConfApConfigTableGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.2,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigTableGroup,,,,,,Group of columnar objects implemented to provide Radio Configuration info in releases 7.1 to 8.0. Replaced by trpzApConfRadioConfigTableGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.3,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateConfigTableGroup,,,,,,Group of columnar objects implemented to provide AP Configuration Template info in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.4,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateRadioConfigTableGroup,,,,,,Group of columnar objects implemented to provide Radio Configuration Template info in releases 7.1 to 8.0. Replaced by trpzApConfApTemplateRadioConfigTableGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.5,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileTableGroup,,,,,,Group of columnar objects implemented to provide Radio Profile configuration info in releases 7.1 to 7.7. Replaced by trpzApConfRadioProfileTableGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.6,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfServiceProfileTableGroup,,,,,,Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 7.1 to 8.0. Replaced by trpzApConfRadioProf32ServiceProfileTableGroup.
.1.3.6.1.4.1.14525.4.14.2.2.7,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfSnoopFilterTableGroup,,,,,,Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 7.1 to 8.0. Replaced by trpzApConfRadioProf32SnoopFilterTableGroup.
.1.3.6.1.4.1.14525.4.14.2.2.8,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServiceProfileTableGroup,,,,,,Group of columnar objects implemented to provide Service Profile configuration info in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.9,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterTableGroup,,,,,,Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.1 to 7.6. Replaced by trpzApConfSnoopFilterTableGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.10,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServiceProfileTableGroupRev2,,,,,,Group of columnar objects implemented to provide Service Profile configuration info in releases 7.5 to 7.6. Replaced by trpzApConfServiceProfileTableGroupRev3.
.1.3.6.1.4.1.14525.4.14.2.2.11,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigLldpGroup,,,,,,Group of columnar objects implemented to provide AP LLDP Configuration info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.12,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigTunnelGroup,,,,,,Group of columnar objects implemented to provide AP to AP tunnel Configuration info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.13,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigRemoteApGroup,,,,,,Group of columnar objects implemented to provide remote AP related Configuration info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.14,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileRFSpectralScanGroup,,,,,,Group of columnar objects implemented to provide Radio Profile RF Spectral Scanning configuration info in releases 7.5 to 8.0. Replaced by trpzApConfRadioProfileRFSpectralScanGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.15,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigTableGroupRev2,,,,,,Group of columnar objects implemented to provide AP Configuration info in releases 7.7 to 8.0. Replaced by trpzApConfApConfigTableGroupRev3.
.1.3.6.1.4.1.14525.4.14.2.2.16,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterTableGroupRev2,,,,,,Group of columnar objects implemented to provide Snoop Filter configuration info in releases 7.7 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.17,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverTableGroup,,,,,,Group of columnar objects implemented to provide Snoop Observer configuration info in releases 7.7 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.18,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioSnoopFilterTableGroup,,,,,,Group of columnar objects implemented to provide info about the associations of Snoop Filters with AP Radios in releases 7.7 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.19,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServiceProfileTableGroupRev3,,,,,,Group of columnar objects implemented to provide Service Profile configuration info in releases 7.7 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.20,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteTableGroup,,,,,,Group of columnar objects implemented to provide Remote Site configuration info in releases 7.7 to 8.0. Replaced by trpzApConfRemoteSiteTableGroupRev2.
.1.3.6.1.4.1.14525.4.14.2.2.21,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileTableGroupRev2,,,,,,Group of columnar objects implemented to provide Radio Profile configuration info in release 8.0. Replaced by trpzApConfRadioProfile32TableGroup.
.1.3.6.1.4.1.14525.4.14.2.2.22,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigTableGroupRev3,,,,,,Group of columnar objects implemented to provide AP Configuration info in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.23,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigTableGroupRev2,,,,,,Group of columnar objects implemented to provide Radio Configuration info in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.24,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateRadioConfigTableGroupRev2,,,,,,Group of columnar objects implemented to provide Radio Configuration Template info in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.25,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfile32TableGroup,,,,,,Group of columnar objects implemented to provide Radio Profile configuration info in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.26,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileRFSpectralScanGroupRev2,,,,,,Group of columnar objects implemented to provide Radio Profile RF Spectral Scanning configuration info in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.27,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32ServiceProfileTableGroup,,,,,,Group of columnar objects implemented to provide Service Profiles associated to each Radio Profile in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.28,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32SnoopFilterTableGroup,,,,,,Group of columnar objects implemented to provide Snoop Filters associated to each Radio Profile in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.14.2.2.29,TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteTableGroupRev2,,,,,,Group of columnar objects implemented to provide Remote Site configuration info in releases 9.0 and greater.
.1.3.6.1.4.1.14525.4.15,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfiguredMib,,,,,,Unconfigured/orphan APs info for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Orphan AP = an AP currently detected by this AC but not managed by any AC. Copyright 2008-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.15.1,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.15.1.2,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanTable,,not-accessible,,current,,A table describing all the APs currently detected by this AC but not managed by any AC. Such APs are reported as ''unconfigured'' or ''orphan'' in other management interfaces of the AC (CLI, Web etc).
.1.3.6.1.4.1.14525.4.15.1.2.1,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanEntry,,not-accessible,trpzApUnconfOrphanApSerialNum,current,,Information about a particular orphan AP detected by this AC.
.1.3.6.1.4.1.14525.4.15.1.2.1.1,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanApSerialNum,OCTET,not-accessible,,current,,The Serial Number of this orphan AP.
.1.3.6.1.4.1.14525.4.15.1.2.1.2,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanApModelName,OCTET,read-only,,current,,The Model name of this orphan AP.
.1.3.6.1.4.1.14525.4.15.1.2.1.5,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanIpAddress,IpAddress,read-only,,current,,The IPv4 Address of this orphan AP.
.1.3.6.1.4.1.14525.4.15.1.2.1.6,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanPhysPortNum,Unsigned32,read-only,,current,,The Number of the Physical Port on which this orphan AP was detected by the AC (usually the uplink port going to other switches/routers connecting this AP to the network).
.1.3.6.1.4.1.14525.4.15.1.2.1.7,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanVLANName,OCTET,read-only,,current,,Identifies the VLAN containing this orphan AP. This is the VLAN Name as configured on this AC (another AC might have a different name corresponding to same VLAN tag used in the network).
.1.3.6.1.4.1.14525.4.15.1.2.1.8,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanReason,INTEGER,read-only,,current,other(1):no-configuration(2):ap-license-exceeded(3):controller-behind-nat(4):ap-model-mismatch(5):no-macs(6),The reason why this AP is orphan.
.1.3.6.1.4.1.14525.4.15.2,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfConformance,,,,,,
.1.3.6.1.4.1.14525.4.15.2.1,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfCompliances,,,,,,
.1.3.6.1.4.1.14525.4.15.2.1.1,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfCompliance,,,,,,The compliance statement for devices that implement AP Unconfigured MIB.
.1.3.6.1.4.1.14525.4.15.2.2,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfGroups,,,,,,
.1.3.6.1.4.1.14525.4.15.2.2.1,TRAPEZE-NETWORKS-AP-UNCONFIGURED-MIB::trpzApUnconfOrphanBasicGroup,,,,,,Mandatory group of objects implemented to provide info about Orphan APs.
.1.3.6.1.4.1.14525.4.16,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfMib,,,,,,AP network Interface objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright (c) 2008-2009 by Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.16.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.16.1.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfTable,,not-accessible,,current,,A table describing the network interfaces on all the APs currently present and managed by this AC (APs in ''ALIVE'' state).
.1.3.6.1.4.1.14525.4.16.1.1.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfEntry,,not-accessible,trpzApIfApSerialNum:trpzApIfIndex,current,,Information about a particular network interface on an AP attached to the AC.
.1.3.6.1.4.1.14525.4.16.1.1.1.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfApSerialNum,OCTET,not-accessible,,current,,The Serial Number of the AP containing this network interface.
.1.3.6.1.4.1.14525.4.16.1.1.1.2,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfIndex,Unsigned32,not-accessible,,current,,A unique value, greater than zero, for each AP network interface.
.1.3.6.1.4.1.14525.4.16.1.1.1.3,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfName,OCTET,read-only,,current,,The textual name of the interface.
.1.3.6.1.4.1.14525.4.16.1.1.1.4,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of AP network interfaces.
.1.3.6.1.4.1.14525.4.16.1.1.1.5,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfMtu,Unsigned32,read-only,,current,,The size of the largest packet which can be sent/received on the interface, specified in octets.
.1.3.6.1.4.1.14525.4.16.1.1.1.6,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfHighSpeed,Gauge32,read-only,,current,,The nominal bandwidth of AP network interfaces in units of 1,000,000 bits per second.
.1.3.6.1.4.1.14525.4.16.1.1.1.7,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfMac,OCTET,read-only,,current,,The MAC address of this network interface.
.1.3.6.1.4.1.14525.4.16.2,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfConformance,,,,,,
.1.3.6.1.4.1.14525.4.16.2.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfCompliances,,,,,,
.1.3.6.1.4.1.14525.4.16.2.1.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfCompliance,,,,,,The compliance statement for devices that implement AP If MIB. This compliance statement is for releases 7.1 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.16.2.2,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfGroups,,,,,,
.1.3.6.1.4.1.14525.4.16.2.2.1,TRAPEZE-NETWORKS-AP-IF-MIB::trpzApIfBasicGroup,,,,,,Group of columnar objects implemented to provide basic Interface info in releases 7.1 and greater.
.1.3.6.1.4.1.14525.4.18,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistMib,,,,,,RF Blacklist objects for Trapeze Networks wireless switches. Copyright (c) 2009-2011 by Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.18.1,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.18.1.2,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistXmtrTable,,not-accessible,,current,,A table containing transmitters blacklisted by RF Detection.
.1.3.6.1.4.1.14525.4.18.1.2.1,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistXmtrEntry,,not-accessible,trpzRFBlacklistXmtrMacAddress,current,,Information about a particular blacklisted transmitter.
.1.3.6.1.4.1.14525.4.18.1.2.1.1,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistXmtrMacAddress,OCTET,not-accessible,,current,,The MAC Address of this Blacklisted Transmitter.
.1.3.6.1.4.1.14525.4.18.1.2.1.2,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistXmtrType,INTEGER,read-only,,current,other(1):unknownDynamic(2):configuredPermanent(3):configuredDynamic(4):assocReqFlood(5):reassocReqFlood(6):disassocReqFlood(7),The Type of this Blacklisted Transmitter.
.1.3.6.1.4.1.14525.4.18.1.2.1.3,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistXmtrTimeToLive,Unsigned32,read-only,,current,,The remaining time in seconds until this Transmitter is removed from the RF Blacklist. For permanent entries, the value will be always zero.
.1.3.6.1.4.1.14525.4.18.2,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistConformance,,,,,,
.1.3.6.1.4.1.14525.4.18.2.1,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistCompliances,,,,,,
.1.3.6.1.4.1.14525.4.18.2.1.1,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistCompliance,,,,,,The compliance statement for devices that implement RF Blacklist MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.18.2.2,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistGroups,,,,,,
.1.3.6.1.4.1.14525.4.18.2.2.1,TRAPEZE-NETWORKS-RF-BLACKLIST-MIB::trpzRFBlacklistXmtrGroup,,,,,,Group of columnar objects implemented to provide Blacklisted Transmitter info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.19,TRAPEZE-NETWORKS-LICENSE-FEATURE-TC-MIB::trpzLicenseFeatureTc,,,,,,Textual Convention for the Licensable Features of Trapeze Networks wireless switches. Copyright 2009-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.20,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfigMib,,,,,,QoS Configuration objects MIB for Trapeze Networks wireless switches. AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright (c) 2010-2011 by Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.20.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfigMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.20.1.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfQosProfileConfigTable,,not-accessible,,current,,A table describing the QoS Profiles configured on this AC.
.1.3.6.1.4.1.14525.4.20.1.1.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfQosProfileConfigEntry,,not-accessible,trpzQosConfQosProfConfProfileName,current,,Information about a particular QoS Profile on the AC.
.1.3.6.1.4.1.14525.4.20.1.1.1.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfQosProfConfProfileName,OCTET,not-accessible,,current,,The Name of this QoS Profile.
.1.3.6.1.4.1.14525.4.20.1.1.1.2,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfQosProfConfMaxBandwidthKbps,Unsigned32,read-write,,current,,The bandwidth limit for an entity using this QoS profile, in Kbits/second. A value of zero means unlimited.
.1.3.6.1.4.1.14525.4.20.2,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfigConformance,,,,,,
.1.3.6.1.4.1.14525.4.20.2.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfigCompliances,,,,,,
.1.3.6.1.4.1.14525.4.20.2.1.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfigCompliance,,,,,,The compliance statement for devices that implement QoS Configuration MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.20.2.2,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfigGroups,,,,,,
.1.3.6.1.4.1.14525.4.20.2.2.1,TRAPEZE-NETWORKS-QOS-CONFIG-MIB::trpzQosConfQosProfileConfigGroup,,,,,,Group of columnar objects implemented to provide QoS Profile Configuration info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.21,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterMib,,,,,,Cluster objects for Trapeze Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB; PAM = Primary AP Manager; SAM = Secondary AP Manager. Copyright 2010-2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.21.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterMibObjects,,,,,,
.1.3.6.1.4.1.14525.4.21.1.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignmentTable,,not-accessible,,current,,A table describing the AP manager assignments for the APs currently present and managed by the Cluster this AC is part of.
.1.3.6.1.4.1.14525.4.21.1.1.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignmentEntry,,not-accessible,trpzClusterApAssignApNum,current,,Information about a particular AP assignment in this Cluster.
.1.3.6.1.4.1.14525.4.21.1.1.1.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignApNum,Unsigned32,not-accessible,,current,,The AP Number.
.1.3.6.1.4.1.14525.4.21.1.1.1.2,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignPamIp,IpAddress,read-only,,current,,The IP address of the assigned Primary AP Manager controller.
.1.3.6.1.4.1.14525.4.21.1.1.1.3,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignSamIp,IpAddress,read-only,,current,,The IP address of the assigned Secondary AP Manager controller. A value of 0.0.0.0 means this AP does not have an assigned SAM.
.1.3.6.1.4.1.14525.4.21.1.1.1.4,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignConnectedToPam,INTEGER,read-only,,current,true(1):false(2),Indicates whether this AP is currently connected to its assigned Primary AP Manager controller.
.1.3.6.1.4.1.14525.4.21.1.1.1.5,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignConnectedToSam,INTEGER,read-only,,current,true(1):false(2),Indicates whether this AP is currently connected to its assigned Secondary AP Manager controller.
.1.3.6.1.4.1.14525.4.21.2,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterConformance,,,,,,
.1.3.6.1.4.1.14525.4.21.2.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterCompliances,,,,,,
.1.3.6.1.4.1.14525.4.21.2.1.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterCompliance,,,,,,The compliance statement for devices that implement Cluster MIB. This compliance statement is for releases 7.5 and greater of AC (wireless switch) software.
.1.3.6.1.4.1.14525.4.21.2.2,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterGroups,,,,,,
.1.3.6.1.4.1.14525.4.21.2.2.1,TRAPEZE-NETWORKS-CLUSTER-MIB::trpzClusterApAssignmentGroup,,,,,,Group of columnar objects implemented to provide Cluster AP Assignments info in releases 7.5 and greater.
.1.3.6.1.4.1.14525.4.22,TRAPEZE-NETWORKS-RF-NOISE-TC-MIB::trpzRFNoiseTc,,,,,,Textual Conventions used by Trapeze Networks wireless switches. Copyright 2011 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.4.23,TRAPEZE-NETWORKS-EXTERNAL-SERVER-TC::trpzExternalServerTc,,,,,,Textual Conventions used by Trapeze Networks wireless switches. Copyright 2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
.1.3.6.1.4.1.14525.5,TRAPEZE-NETWORKS-ROOT-MIB::trpzTraps,,,,,,
.1.3.6.1.4.1.14525.5.0,TRAPEZE-NETWORKS-TRAP-MIB::trpzTrapsV2,,,,,,
.1.3.6.1.4.1.14525.5.0.1,TRAPEZE-NETWORKS-TRAP-MIB::trpzDeviceFailTrap,,,,,,The device has a failure indication
.1.3.6.1.4.1.14525.5.0.2,TRAPEZE-NETWORKS-TRAP-MIB::trpzDeviceOkayTrap,,,,,,The device has recovered
.1.3.6.1.4.1.14525.5.0.3,TRAPEZE-NETWORKS-TRAP-MIB::trpzPoEFailTrap,,,,,,PoE has failed on the indicated port
.1.3.6.1.4.1.14525.5.0.4,TRAPEZE-NETWORKS-TRAP-MIB::trpzApTimeoutTrap,,,,,,The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'timeout'.
.1.3.6.1.4.1.14525.5.0.5,TRAPEZE-NETWORKS-TRAP-MIB::trpzAPBootTrap,,,,,,The AP entering the AC at port trpzPortNum with MAC trpzRadioMacAddress and of the access type (ap or dap) has booted. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'bootSuccess'.
.1.3.6.1.4.1.14525.5.0.6,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainJoinTrap,,,,,,The mobility domain member has received an UP notice from the remote address.
.1.3.6.1.4.1.14525.5.0.7,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainTimeoutTrap,,,,,,The mobility domain member has declared the remote address to be DOWN.
.1.3.6.1.4.1.14525.5.0.8,TRAPEZE-NETWORKS-TRAP-MIB::trpzMpMichaelMICFailure,,,,,,Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by trpzMichaelMICFailure.
.1.3.6.1.4.1.14525.5.0.9,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectRogueAPTrap,,,,,,This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2.
.1.3.6.1.4.1.14525.5.0.10,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectAdhocUserTrap,,,,,,This trap is sent when RF detection sweep finds a ad-hoc user. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. trpzRFDetectListenerListInfo is a display string of a list of listener information.
.1.3.6.1.4.1.14525.5.0.11,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectRogueDisappearTrap,,,,,,This trap is sent when a rogue has disappeared. Obsoleted by trpzRFDetectRogueDeviceDisappearTrap.
.1.3.6.1.4.1.14525.5.0.12,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthenticationFailureTrap,,,,,,This trap is sent if a client authentication fails.
.1.3.6.1.4.1.14525.5.0.13,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationFailureTrap,,,,,,This trap is sent if a client authorization fails.
.1.3.6.1.4.1.14525.5.0.14,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAssociationFailureTrap,,,,,,This trap is sent if a client association fails.
.1.3.6.1.4.1.14525.5.0.15,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationSuccessTrap,,,,,,This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5.
.1.3.6.1.4.1.14525.5.0.16,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeAssociationTrap,,,,,,This trap is sent if a client de-association occurred. Obsoleted by trpzClientDeAssociationTrap2.
.1.3.6.1.4.1.14525.5.0.17,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamingTrap,,,,,,This trap is sent if a client roams from one location to another. Obsoleted by trpzClientRoamingTrap2.
.1.3.6.1.4.1.14525.5.0.18,TRAPEZE-NETWORKS-TRAP-MIB::trpzAutoTuneRadioPowerChangeTrap,,,,,,This trap is sent if a radio's power level has changed based on auto-tune.
.1.3.6.1.4.1.14525.5.0.19,TRAPEZE-NETWORKS-TRAP-MIB::trpzAutoTuneRadioChannelChangeTrap,,,,,,This trap is sent if a radio's channel has changed based on auto-tune.
.1.3.6.1.4.1.14525.5.0.20,TRAPEZE-NETWORKS-TRAP-MIB::trpzCounterMeasureStartTrap,,,,,,This trap is sent when counter measures are started against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures.
.1.3.6.1.4.1.14525.5.0.21,TRAPEZE-NETWORKS-TRAP-MIB::trpzCounterMeasureStopTrap,,,,,,This trap is sent when counter measures are stopped against a rogue. trpzRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. trpzRadioMACAddress identifies the radio performing the countermeasures.
.1.3.6.1.4.1.14525.5.0.22,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDot1xFailureTrap,,,,,,This trap is sent if a client failed 802.1X.
.1.3.6.1.4.1.14525.5.0.23,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientClearedTrap,,,,,,This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3.
.1.3.6.1.4.1.14525.5.0.24,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationSuccessTrap2,,,,,,This trap is sent when a client authorizes. Obsoleted by trpzClientAuthorizationSuccessTrap5.
.1.3.6.1.4.1.14525.5.0.25,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectSpoofedMacAPTrap,,,,,,This trap is sent when RF detection finds an AP using the MAC of the listener. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectDoSTrap and trpzRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected.
.1.3.6.1.4.1.14525.5.0.26,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectSpoofedSsidAPTrap,,,,,,This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules.
.1.3.6.1.4.1.14525.5.0.27,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectDoSTrap,,,,,,This trap is sent when RF detection finds a denial of service (DoS) occurring. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information.
.1.3.6.1.4.1.14525.5.0.28,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectClientViaRogueWiredAPTrap,,,,,,This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3.
.1.3.6.1.4.1.14525.5.0.29,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectInterferingRogueAPTrap,,,,,,This trap is sent when RF detection finds an interfering rogue AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectSuspectDeviceTrap2.
.1.3.6.1.4.1.14525.5.0.30,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectInterferingRogueDisappearTrap,,,,,,This trap is sent when an interfering rogue has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by trpzRFDetectSuspectDeviceDisappearTrap.
.1.3.6.1.4.1.14525.5.0.31,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectUnAuthorizedSsidTrap,,,,,,This trap is sent when RF detection finds use of an unauthorized SSID. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this.
.1.3.6.1.4.1.14525.5.0.32,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectUnAuthorizedOuiTrap,,,,,,This trap is sent when RF detection finds use of an unauthorized OUI. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2 and trpzRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this.
.1.3.6.1.4.1.14525.5.0.33,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectUnAuthorizedAPTrap,,,,,,This trap is sent when RF detection finds operation of an unauthorized AP. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by trpzRFDetectRogueDeviceTrap2.
.1.3.6.1.4.1.14525.5.0.34,TRAPEZE-NETWORKS-TRAP-MIB::trpzDAPConnectWarningTrap,,,,,,A DAP, tried to connect to the AC. trpzDeviceModel provides the model of the DAP. trpzDeviceSerNum provides the serial number of the DAP. trpzRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. trpzDAPconnectWarningType provides the type of connect warning. Replaced by trpzApNonOperStatusTrap2, with trpzApTransition = 'connectFail'.
.1.3.6.1.4.1.14525.5.0.35,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectDoSPortTrap,,,,,,This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. trpzRFDetectDoSType specifies the type of DoS. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzClientAccessType specifies whether wired, AP, or DAP. trpzPortNum (for wired or AP), the port that is used. trpzDAPNum (for a DAP), the ID of the DAP.
.1.3.6.1.4.1.14525.5.0.36,TRAPEZE-NETWORKS-TRAP-MIB::trpzMpMichaelMICFailure2,,,,,,Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress is the source of the first failure, and object trpzClientMACAddress2 source of the second failure. Obsoleted by trpzMichaelMICFailure.
.1.3.6.1.4.1.14525.5.0.37,TRAPEZE-NETWORKS-TRAP-MIB::trpzApNonOperStatusTrap,,,,,,This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by trpzApNonOperStatusTrap2.
.1.3.6.1.4.1.14525.5.0.38,TRAPEZE-NETWORKS-TRAP-MIB::trpzApOperRadioStatusTrap,,,,,,This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3.
.1.3.6.1.4.1.14525.5.0.39,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIpAddrChangeTrap,,,,,,This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network. Obsoleted by trpzClientIpAddrChangeTrap2.
.1.3.6.1.4.1.14525.5.0.40,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAssociationSuccessTrap,,,,,,This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues.
.1.3.6.1.4.1.14525.5.0.41,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthenticationSuccessTrap,,,,,,This trap is sent if a client authentication succeeds.
.1.3.6.1.4.1.14525.5.0.42,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeAuthenticationTrap,,,,,,This trap is sent if a client de-authentication occurred. Obsoleted by trpzClientDeAuthenticationTrap2.
.1.3.6.1.4.1.14525.5.0.43,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectBlacklistedTrap,,,,,,This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter  (identified by MAC: 'trpzRFDetectXmtrMacAddr'). If 'trpzBlacklistingCause' is 'configured', then 'trpzBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'trpzBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed.
.1.3.6.1.4.1.14525.5.0.44,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectClientViaRogueWiredAPTrap2,,,,,,This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by trpzRFDetectClientViaRogueWiredAPTrap3.
.1.3.6.1.4.1.14525.5.0.45,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectAdhocUserDisappearTrap,,,,,,This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. trpzRFDetectXmtrMacAddr is the MAC address of the ad-hoc user.
.1.3.6.1.4.1.14525.5.0.46,TRAPEZE-NETWORKS-TRAP-MIB::trpzApRejectLicenseExceededTrap,,,,,,This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs.
.1.3.6.1.4.1.14525.5.0.47,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDynAuthorChangeSuccessTrap,,,,,,This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. Obsoleted by trpzClientDynAuthorChangeSuccessTrap2.
.1.3.6.1.4.1.14525.5.0.48,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDynAuthorChangeFailureTrap,,,,,,This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful.
.1.3.6.1.4.1.14525.5.0.49,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDisconnectTrap,,,,,,This trap is sent when a client session is terminated administratively. Obsoleted by trpzClientDisconnectTrap2.
.1.3.6.1.4.1.14525.5.0.50,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainFailOverTrap,,,,,,This trap is sent when the Mobility Domain fails over to the secondary seed.
.1.3.6.1.4.1.14525.5.0.51,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainFailBackTrap,,,,,,This trap is sent when the Mobility Domain fails back to the primary seed.
.1.3.6.1.4.1.14525.5.0.52,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectRogueDeviceTrap,,,,,,This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by trpzRFDetectRogueDeviceTrap2.
.1.3.6.1.4.1.14525.5.0.53,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectRogueDeviceDisappearTrap,,,,,,This trap is sent when a rogue device has disappeared. This trap obsoletes the trpzRFDetectRogueDisappearTrap.
.1.3.6.1.4.1.14525.5.0.54,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectSuspectDeviceTrap,,,,,,This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by trpzRFDetectSuspectDeviceTrap2.
.1.3.6.1.4.1.14525.5.0.55,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectSuspectDeviceDisappearTrap,,,,,,This trap is sent when a suspect device has disappeared. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the trpzRFDetectInterferingRogueDisappearTrap.
.1.3.6.1.4.1.14525.5.0.56,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectClientViaRogueWiredAPTrap3,,,,,,This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. trpzSourceWsIp is the IP address of the AC (switch) with the wired port. trpzPortNum is the port on the AC. trpzClientVLANid is the VLAN ID of the client's traffic. trpzClientVLANtag is the VLAN tag of the client's traffic. trpzRFDetectXmtrMacAddr is the MAC address of the client. trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the trpzRFDetectClientViaRogueWiredAPTrap and trpzRFDetectClientViaRogueWiredAPTrap2.
.1.3.6.1.4.1.14525.5.0.57,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectClassificationChangeTrap,,,,,,This trap is sent when RF detection classification rules change.
.1.3.6.1.4.1.14525.5.0.58,TRAPEZE-NETWORKS-TRAP-MIB::trpzConfigurationSavedTrap,,,,,,This trap is sent when the running configuration of the switch is written to a configuration file.
.1.3.6.1.4.1.14525.5.0.59,TRAPEZE-NETWORKS-TRAP-MIB::trpzApNonOperStatusTrap2,,,,,,This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes trpzApNonOperStatusTrap.
.1.3.6.1.4.1.14525.5.0.60,TRAPEZE-NETWORKS-TRAP-MIB::trpzApOperRadioStatusTrap2,,,,,,This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by trpzApOperRadioStatusTrap3.
.1.3.6.1.4.1.14525.5.0.61,TRAPEZE-NETWORKS-TRAP-MIB::trpzMichaelMICFailure,,,,,,Two Michael MIC failures were seen within 60 seconds of each other. Object trpzClientMACAddress indicates the source of the first failure, and object trpzClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by trpzApNum and trpzAPRadioNum. An alternative way to identify the radio is trpzRadioMACAddress. Obsoletes trpzMpMichaelMICFailure and trpzMpMichaelMICFailure2.
.1.3.6.1.4.1.14525.5.0.62,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationSuccessTrap3,,,,,,This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5.
.1.3.6.1.4.1.14525.5.0.63,TRAPEZE-NETWORKS-TRAP-MIB::trpzApManagerChangeTrap,,,,,,This trap is sent when the AP's secondary link becomes its primary link.
.1.3.6.1.4.1.14525.5.0.64,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientClearedTrap2,,,,,,This trap is sent when a client session is cleared. Obsoleted by trpzClientClearedTrap3.
.1.3.6.1.4.1.14525.5.0.65,TRAPEZE-NETWORKS-TRAP-MIB::trpzMobilityDomainResiliencyStatusTrap,,,,,,This trap is sent by a mobility domain seed to announce changes in resilient capacity status.
.1.3.6.1.4.1.14525.5.0.66,TRAPEZE-NETWORKS-TRAP-MIB::trpzApOperRadioStatusTrap3,,,,,,This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes trpzApOperRadioStatusTrap and trpzApOperRadioStatusTrap2.
.1.3.6.1.4.1.14525.5.0.67,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationSuccessTrap4,,,,,,This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzAPRadioNum, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by trpzClientAuthorizationSuccessTrap5.
.1.3.6.1.4.1.14525.5.0.68,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectRogueDeviceTrap2,,,,,,This trap is sent when RF detection finds a rogue device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes trpzRFDetectRogueAPTrap, trpzRFDetectUnAuthorizedAPTrap, trpzRFDetectRogueDeviceTrap.
.1.3.6.1.4.1.14525.5.0.69,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFDetectSuspectDeviceTrap2,,,,,,This trap is sent when RF detection finds a suspect device. trpzRFDetectXmtrMacAddr is the radio MAC address from the beacon. trpzRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). trpzRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). trpzRFDetectListenerListInfo is a display string of a list of listener information. trpzRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes trpzRFDetectInterferingRogueAPTrap, trpzRFDetectSuspectDeviceTrap.
.1.3.6.1.4.1.14525.5.0.70,TRAPEZE-NETWORKS-TRAP-MIB::trpzClusterFailureTrap,,,,,,This trap is sent when the cluster configuration failed to apply. If trpzClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active.
.1.3.6.1.4.1.14525.5.0.71,TRAPEZE-NETWORKS-TRAP-MIB::trpzMultimediaCallFailureTrap,,,,,,This trap is sent when a multimedia call fails.
.1.3.6.1.4.1.14525.5.0.72,TRAPEZE-NETWORKS-TRAP-MIB::trpzApTunnelLimitExceededTrap,,,,,,This trap is sent by the AP primary controller (PAM) when an AP rejects a tunnel creation request because it has already created the maximum number of tunnels it can support.
.1.3.6.1.4.1.14525.5.0.73,TRAPEZE-NETWORKS-TRAP-MIB::trpzWsTunnelLimitExceededTrap,,,,,,This trap is sent when the AC (wireless switch) rejects a tunnel creation request because it has reached the maximum number of tunnels supported (indicated by 'trpzWsTunnelLimit'). When trpzWsTunnelLimitType = 'platform-tunnel-limit' (2) the AC has reached the maximum tunnel capacity, which depends on the platform. When trpzWsTunnelLimitType = 'ap-ws-tunnel-limit' (3) the AC has reached the AP-to-switch tunnels limit, which depends on the current situation of the AC (mobility domain, network domain, network resiliency status).
.1.3.6.1.4.1.14525.5.0.74,TRAPEZE-NETWORKS-TRAP-MIB::trpzRFNoiseSourceTrap,,,,,,This trap is sent upon the appearance of a new noise source. 'trpzRadioMACAddress' indicates the listener (the AP radio reporting the noise). A given combination of noise source ID, listener and channel should trigger this trap at most once every 15 minutes.
.1.3.6.1.4.1.14525.5.0.75,TRAPEZE-NETWORKS-TRAP-MIB::trpzM2UConvNotPossibleTrap,,,,,,This trap is sent when multicast to unicast conversion is enabled on the AP, but cannot be performed.
.1.3.6.1.4.1.14525.5.0.76,TRAPEZE-NETWORKS-TRAP-MIB::trpzM2UConvAvailabilityRestoredTrap,,,,,,This trap is sent when the multicast to unicast conversion can be resumed on the AP, after disruption.
.1.3.6.1.4.1.14525.5.0.77,TRAPEZE-NETWORKS-TRAP-MIB::trpzAutoTuneSuccessTrap,,,,,,This trap is sent when an auto-tune operation completed successfully.
.1.3.6.1.4.1.14525.5.0.78,TRAPEZE-NETWORKS-TRAP-MIB::trpzAutoTuneFailureTrap,,,,,,This trap is sent when an auto-tune operation failed to complete.
.1.3.6.1.4.1.14525.5.0.79,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeAssociationTrap2,,,,,,This trap is sent if a client de-association occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client before deassociation; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAssociationTrap.
.1.3.6.1.4.1.14525.5.0.80,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientRoamingTrap2,,,,,,This trap is sent if a client roams from one location to another. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client, after roam; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client, after roam. Obsoletes trpzClientRoamingTrap.
.1.3.6.1.4.1.14525.5.0.81,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientIpAddrChangeTrap2,,,,,,This trap is sent when an IP address of a client changes. The most likely cases for this are when the client first connects to the network and when a new IPv6 global address is assigned to the client. The pair of objects trpzClientIpAddrType/trpzClientIpAddr indicates the type and the value of the new IP address. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientIpAddrChangeTrap.
.1.3.6.1.4.1.14525.5.0.82,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeAuthenticationTrap2,,,,,,This trap is sent if a client de-authentication occurred. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDeAuthenticationTrap.
.1.3.6.1.4.1.14525.5.0.83,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDynAuthorChangeSuccessTrap2,,,,,,This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDynAuthorChangeSuccessTrap.
.1.3.6.1.4.1.14525.5.0.84,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDisconnectTrap2,,,,,,This trap is sent when a client session is terminated administratively. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientDisconnectTrap.
.1.3.6.1.4.1.14525.5.0.85,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientClearedTrap3,,,,,,This trap is sent when a client session is cleared. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientClearedTrap, trpzClientClearedTrap2.
.1.3.6.1.4.1.14525.5.0.86,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientAuthorizationSuccessTrap5,,,,,,This trap is sent when a client authorizes. If trpzClientAccessMode = 'ap': trpzApNum, trpzApRadioIndex, trpzRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; trpzClientRadioType gives the type of radio used by this client. If trpzClientAccessMode = 'wired': trpzPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes trpzClientAuthorizationSuccessTrap, trpzClientAuthorizationSuccessTrap2, trpzClientAuthorizationSuccessTrap3, trpzClientAuthorizationSuccessTrap4.
.1.3.6.1.4.1.14525.5.0.87,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceTypeChangeTrap,,,,,,This trap is sent when the detected device type of a client changes. The new device type is indicated by trpzClientDeviceType. trpzClientDeviceGroup indicates the group that the new device type belongs to. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap').
.1.3.6.1.4.1.14525.5.0.88,TRAPEZE-NETWORKS-TRAP-MIB::trpzClientDeviceProfileChangeTrap,,,,,,This trap is sent when the device profile for a client device changes. The new device profile is indicated by trpzClientDeviceProfileName. trpzClientDeviceProfileChangeReason indicates the reason why the device profile changed. As of release 8.0, device detection is done only for wireless clients (trpzClientAccessMode = 'ap').
.1.3.6.1.4.1.14525.6,TRAPEZE-NETWORKS-ROOT-MIB::trpzMgmtAppMibs,,,,,,
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
