.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.3181,MICROSENS-G6-MIB::microsens,,,,,,Microsens private MIB for Generation 6 Ethernet Switches
.1.3.6.1.4.1.3181.10,MICROSENS-G6-MIB::managedSwitches,,,,,,
.1.3.6.1.4.1.3181.10.3,MS-SWITCH30-MIB::mib3,,,,,,MIB module for managed Switches
.1.3.6.1.4.1.3181.10.3.1,MS-SWITCH30-MIB::device,,,,,,
.1.3.6.1.4.1.3181.10.3.1.1,MS-SWITCH30-MIB::deviceArtNo,OCTET,read-only,,current,,This entry describes the article number 
.1.3.6.1.4.1.3181.10.3.1.2,MS-SWITCH30-MIB::deviceSerNo,OCTET,read-only,,current,,This entry describes the serial number 
.1.3.6.1.4.1.3181.10.3.1.3,MS-SWITCH30-MIB::deviceHardware,OCTET,read-only,,current,,This entry contains the hardware version
.1.3.6.1.4.1.3181.10.3.1.4,MS-SWITCH30-MIB::deviceDescription,OCTET,read-only,,current,,This entry contains a description of 
.1.3.6.1.4.1.3181.10.3.1.5,MS-SWITCH30-MIB::deviceName,OCTET,read-write,,current,,This entry contains a description of 
.1.3.6.1.4.1.3181.10.3.1.6,MS-SWITCH30-MIB::deviceLocation,OCTET,read-write,,current,,This entry contains the location of 
.1.3.6.1.4.1.3181.10.3.1.7,MS-SWITCH30-MIB::deviceContact,OCTET,read-write,,current,,This entry contains a contact regarding 
.1.3.6.1.4.1.3181.10.3.1.8,MS-SWITCH30-MIB::deviceGroup,OCTET,read-write,,current,,This entry defines the name of the group 
.1.3.6.1.4.1.3181.10.3.1.9,MS-SWITCH30-MIB::deviceTemperature,INTEGER,read-only,,current,,This is the current temperature of the 
.1.3.6.1.4.1.3181.10.3.1.10,MS-SWITCH30-MIB::deviceTemperatureLevel,INTEGER,read-only,,current,criticalLow(1):low(2):normal(3):high(4):criticalHigh(5):shutdown(6):undefined(254):unsupported(255),This is the current temperature level 
.1.3.6.1.4.1.3181.10.3.1.11,MS-SWITCH30-MIB::deviceUpTime,TimeTicks,read-only,,current,,Time since the device was last 
.1.3.6.1.4.1.3181.10.3.1.12,MS-SWITCH30-MIB::deviceFddActiveTime,TimeTicks,read-write,,current,,Active Time interval for Fibre-
.1.3.6.1.4.1.3181.10.3.1.13,MS-SWITCH30-MIB::deviceFddPassiveTime,TimeTicks,read-write,,current,,Passive Time interval for Fibre-
.1.3.6.1.4.1.3181.10.3.1.14,MS-SWITCH30-MIB::deviceInventory,OCTET,read-write,,current,,This entry contains an inventory
.1.3.6.1.4.1.3181.10.3.2,MS-SWITCH30-MIB::agent,,,,,,
.1.3.6.1.4.1.3181.10.3.2.1,MS-SWITCH30-MIB::agentFirmware,OCTET,read-only,,current,,This entry contains the firmware version
.1.3.6.1.4.1.3181.10.3.2.2,MS-SWITCH30-MIB::agentMacAddress,OCTET,read-only,,current,,This entry contains the mac address of 
.1.3.6.1.4.1.3181.10.3.2.3,MS-SWITCH30-MIB::agentIpv4Mode,INTEGER,read-write,,current,static(1):dhcp(2):undefined(254):unsupported(255),This entry describes the IPv4-mode
.1.3.6.1.4.1.3181.10.3.2.4,MS-SWITCH30-MIB::agentIpv4Address,IpAddress,read-write,,current,,This entry contains the IPv4-address of 
.1.3.6.1.4.1.3181.10.3.2.5,MS-SWITCH30-MIB::agentIpv4SubnetMask,IpAddress,read-write,,current,,This entry contains the IPv4 subnet mask
.1.3.6.1.4.1.3181.10.3.2.6,MS-SWITCH30-MIB::agentIpv4Gateway,IpAddress,read-write,,current,,This entry contains the gateway IPv4 address 
.1.3.6.1.4.1.3181.10.3.2.7,MS-SWITCH30-MIB::agentConfigReset,INTEGER,read-write,,current,normalOperation(0):reset(1),Set this entry to '1' to reset the device.
.1.3.6.1.4.1.3181.10.3.2.8,MS-SWITCH30-MIB::agentConfigFactoryDefault,INTEGER,read-write,,current,normalOperation(0):factoryResetTemp(1):factoryResetPerm(2),Set this entry to '1' before setting the 
.1.3.6.1.4.1.3181.10.3.2.9,MS-SWITCH30-MIB::agentConfigEnableFactoryButton,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),Setting this entry to a '1' enables 
.1.3.6.1.4.1.3181.10.3.2.10,MS-SWITCH30-MIB::agentSecureAddressFlag,INTEGER,read-only,,current,useSecure(1):useNormal(2):unsupported(255),This Entry documents the Flag which is
.1.3.6.1.4.1.3181.10.3.2.11,MS-SWITCH30-MIB::agentStorageMediaCardStatus,INTEGER,read-only,,current,noCardInserted(1):invalidCardDetected(2):validCardDetected(3):bootedFromCard(4):bootedFromCardwithMac(5):unsupported(255),This Entry represents the detected status
.1.3.6.1.4.1.3181.10.3.2.12,MS-SWITCH30-MIB::agentStorageMediaCardBoot,INTEGER,read-write,,current,normalOperation(0):bootSmcTemp(1):bootSmcPerm(2):unsupported(255),Set this entry to '1' before setting the 
.1.3.6.1.4.1.3181.10.3.2.13,MS-SWITCH30-MIB::agentStorageMediaCardMac,INTEGER,read-write,,current,useMacFromSMC(1):useOriginalMac(2):unsupported(255),Set this entry to '1' before setting the 
.1.3.6.1.4.1.3181.10.3.2.14,MS-SWITCH30-MIB::agentStoreConfigToStorageMediaCard,INTEGER,read-write,,current,normalOperation(0):store(1):unsupported(255),Set this entry to '1' to store the 
.1.3.6.1.4.1.3181.10.3.2.15,MS-SWITCH30-MIB::agentDhcpConfigRequest,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),Setting this entry to a '1' enables the
.1.3.6.1.4.1.3181.10.3.3,MS-SWITCH30-MIB::port,,,,,,
.1.3.6.1.4.1.3181.10.3.3.1,MS-SWITCH30-MIB::portCount,INTEGER,read-only,,current,,The number of ports resent on this system.
.1.3.6.1.4.1.3181.10.3.3.10,MS-SWITCH30-MIB::portStatusTable,,not-accessible,,current,,This table contains port status information 
.1.3.6.1.4.1.3181.10.3.3.10.1,MS-SWITCH30-MIB::portStatusTableEntry,,not-accessible,portStatusId,current,,Entry in the port status table.
.1.3.6.1.4.1.3181.10.3.3.10.1.1,MS-SWITCH30-MIB::portStatusId,INTEGER,read-only,,current,,This entry describes the port id.
.1.3.6.1.4.1.3181.10.3.3.10.1.2,MS-SWITCH30-MIB::portStatusType,INTEGER,read-only,,current,port-tx10-100(1):port-t10-100-1000(2):port-fx100(3):port-fx100-1000-sfp(4):port-x1000(5):port-tx10-100-1000-sfp(6):port-tx10-100-1000-1x9(7):undefined(254),This entry describes the type of the port.
.1.3.6.1.4.1.3181.10.3.3.10.1.3,MS-SWITCH30-MIB::portStatusLink,INTEGER,read-only,,current,up(1):down(2):undefined(254),This entry describes the link status of 
.1.3.6.1.4.1.3181.10.3.3.10.1.4,MS-SWITCH30-MIB::portStatusSpeed,INTEGER,read-only,,current,speed10(1):speed100(2):speed1000(3):undefined(254),This entry describes the current speed 
.1.3.6.1.4.1.3181.10.3.3.10.1.5,MS-SWITCH30-MIB::portStatusDuplex,INTEGER,read-only,,current,halfduplex(1):fullduplex(2):undefined(254),This entry describes the current duplex 
.1.3.6.1.4.1.3181.10.3.3.10.1.6,MS-SWITCH30-MIB::portStatusFlowControl,INTEGER,read-only,,current,enabled(1):disabled(2):undefined(254):unsupported(255),This entry describes the current flow
.1.3.6.1.4.1.3181.10.3.3.10.1.7,MS-SWITCH30-MIB::portStatusPinout,INTEGER,read-only,,current,mdi(1):mdix(2):undefined(254):unsupported(255),This entry describes the current pinout 
.1.3.6.1.4.1.3181.10.3.3.10.1.8,MS-SWITCH30-MIB::portStatusFarEndFault,INTEGER,read-only,,current,detected(1):undetected(2):undefined(254):unsupported(255),This entry describes the current 
.1.3.6.1.4.1.3181.10.3.3.10.1.9,MS-SWITCH30-MIB::portStatusRxNetload,INTEGER,read-only,,current,,This entry describes the receiver netload 
.1.3.6.1.4.1.3181.10.3.3.10.1.10,MS-SWITCH30-MIB::portStatusTxNetload,INTEGER,read-only,,current,,This entry describes the transmitter netload 
.1.3.6.1.4.1.3181.10.3.3.20,MS-SWITCH30-MIB::portConfigTable,,not-accessible,,current,,This table contains the port configuration 
.1.3.6.1.4.1.3181.10.3.3.20.1,MS-SWITCH30-MIB::portConfigTableEntry,,not-accessible,portConfigId,current,,Entry in the port configuration table.
.1.3.6.1.4.1.3181.10.3.3.20.1.1,MS-SWITCH30-MIB::portConfigId,INTEGER,read-only,,current,,This entry describes the device's port id.
.1.3.6.1.4.1.3181.10.3.3.20.1.2,MS-SWITCH30-MIB::portConfigAlias,OCTET,read-write,,current,,This entry contains an individual name 
.1.3.6.1.4.1.3181.10.3.3.20.1.3,MS-SWITCH30-MIB::portConfigEnable,INTEGER,read-write,,current,enabled(1):disabled(2):undefined(254):unsupported(255),This entry describes the type of the port.
.1.3.6.1.4.1.3181.10.3.3.20.1.4,MS-SWITCH30-MIB::portConfigAutonego,INTEGER,read-write,,current,enabled(1):disabled(2):undefined(254):unsupported(255),This entry describes the current
.1.3.6.1.4.1.3181.10.3.3.20.1.5,MS-SWITCH30-MIB::portConfigSpeed,INTEGER,read-write,,current,force10(1):force100(2):force1000(3):undefined(254):unsupported(255),This entry describes the current speed 
.1.3.6.1.4.1.3181.10.3.3.20.1.6,MS-SWITCH30-MIB::portConfigDuplex,INTEGER,read-write,,current,forcehalf(1):forcefull(2):undefined(254):unsupported(255),This entry describes the current duplex 
.1.3.6.1.4.1.3181.10.3.3.20.1.7,MS-SWITCH30-MIB::portConfigFlowControl,INTEGER,read-write,,current,advertise(1):avoid(2):undefined(254):unsupported(255),This entry describes the current flow 
.1.3.6.1.4.1.3181.10.3.3.20.1.8,MS-SWITCH30-MIB::portConfigPinout,INTEGER,read-write,,current,auto(0):mdi(1):mdix(2):undefined(254):unsupported(255),This entry describes the current pinout 
.1.3.6.1.4.1.3181.10.3.3.20.1.9,MS-SWITCH30-MIB::portConfigFarEndFault,INTEGER,read-write,,current,enabled(1):disalbed(2):undefined(254):unsupported(255),This entry describes the current far end 
.1.3.6.1.4.1.3181.10.3.3.20.1.10,MS-SWITCH30-MIB::portConfigAdvertise,INTEGER,read-write,,current,advertiseGigabit(1):avoidGigabit(2):undefined(254):unsupported(255),This entry describes the autonegotiation
.1.3.6.1.4.1.3181.10.3.3.20.1.11,MS-SWITCH30-MIB::portConfigFibreDownDetection,INTEGER,read-write,,current,enabled(1):disalbed(2):undefined(254):unsupported(255),This entry describes the current fibre 
.1.3.6.1.4.1.3181.10.3.4,MS-SWITCH30-MIB::vlan,,,,,,
.1.3.6.1.4.1.3181.10.3.4.1,MS-SWITCH30-MIB::vlanSupport,INTEGER,read-only,,current,supported(1):notsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.4.2,MS-SWITCH30-MIB::vlanEnable,INTEGER,read-write,,current,enabled(1):disabled(2):undefined(254):unsupported(255),This entry enables or disables vlan filtering.
.1.3.6.1.4.1.3181.10.3.4.3,MS-SWITCH30-MIB::vlanForceDefaultVID,INTEGER,read-write,,current,enabled(1):disabled(2):perport(3):unsupported(255),This entry enables or disables forcing 
.1.3.6.1.4.1.3181.10.3.4.4,MS-SWITCH30-MIB::vlanFilterCount,INTEGER,read-only,,current,,This entry describes the number of 
.1.3.6.1.4.1.3181.10.3.4.5,MS-SWITCH30-MIB::vlanVoiceVID,INTEGER,read-write,,current,,This entry describes the default VID for Voice 
.1.3.6.1.4.1.3181.10.3.4.6,MS-SWITCH30-MIB::vlanRstpVID,INTEGER,read-write,,current,,This entry describes the VID for RSTP operation.
.1.3.6.1.4.1.3181.10.3.4.7,MS-SWITCH30-MIB::vlanUnauthVID,INTEGER,read-write,,current,,This entry describes the VID used for unauthorized
.1.3.6.1.4.1.3181.10.3.4.10,MS-SWITCH30-MIB::vlanPortTable,,not-accessible,,current,,This table contains the vlan port 
.1.3.6.1.4.1.3181.10.3.4.10.1,MS-SWITCH30-MIB::vlanPortTableEntry,,not-accessible,vlanPortId,current,,Entry in the vlan port configuration 
.1.3.6.1.4.1.3181.10.3.4.10.1.1,MS-SWITCH30-MIB::vlanPortId,INTEGER,read-only,,current,,This entry describes the port id for the 
.1.3.6.1.4.1.3181.10.3.4.10.1.2,MS-SWITCH30-MIB::vlanPortMode,INTEGER,read-write,,current,access(1):trunk(2):hybrid(3):undefined(254):unsupported(255),This entry describes the vlan mode the port.
.1.3.6.1.4.1.3181.10.3.4.10.1.3,MS-SWITCH30-MIB::vlanDefaultVID,INTEGER,read-write,,current,,This entry describes default vid for the port.
.1.3.6.1.4.1.3181.10.3.4.10.1.4,MS-SWITCH30-MIB::vlanDefaultPriority,INTEGER,read-write,,current,,This entry describes default priority tag 
.1.3.6.1.4.1.3181.10.3.4.10.1.5,MS-SWITCH30-MIB::vlanPortFlags,INTEGER,read-write,,current,,This Entry contains per port some bitwise 
.1.3.6.1.4.1.3181.10.3.4.20,MS-SWITCH30-MIB::vlanFilterTable,,not-accessible,,current,,This table contains the vlan filter 
.1.3.6.1.4.1.3181.10.3.4.20.1,MS-SWITCH30-MIB::vlanFilterTableEntry,,not-accessible,vlanFilterId,current,,Entry in the vlan filter configuration table.
.1.3.6.1.4.1.3181.10.3.4.20.1.1,MS-SWITCH30-MIB::vlanFilterId,INTEGER,read-only,,current,,This entry contains the filter id for the 
.1.3.6.1.4.1.3181.10.3.4.20.1.2,MS-SWITCH30-MIB::vlanFilterVID,INTEGER,read-write,,current,,This entry describes the vlan id for the 
.1.3.6.1.4.1.3181.10.3.4.20.1.3,MS-SWITCH30-MIB::vlanFilterAlias,OCTET,read-write,,current,,This entry describes an individual name 
.1.3.6.1.4.1.3181.10.3.4.20.1.4,MS-SWITCH30-MIB::vlanFilterEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disabled the vlan 
.1.3.6.1.4.1.3181.10.3.4.20.1.5,MS-SWITCH30-MIB::vlanMemberManager,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of the 
.1.3.6.1.4.1.3181.10.3.4.20.1.6,MS-SWITCH30-MIB::vlanMemberPort1,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.7,MS-SWITCH30-MIB::vlanMemberPort2,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.8,MS-SWITCH30-MIB::vlanMemberPort3,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.9,MS-SWITCH30-MIB::vlanMemberPort4,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.10,MS-SWITCH30-MIB::vlanMemberPort5,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.11,MS-SWITCH30-MIB::vlanMemberPort6,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.12,MS-SWITCH30-MIB::vlanMemberPort7,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.13,MS-SWITCH30-MIB::vlanMemberPort8,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.14,MS-SWITCH30-MIB::vlanMemberPort9,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.15,MS-SWITCH30-MIB::vlanMemberPort10,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.16,MS-SWITCH30-MIB::vlanMemberPort11,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.17,MS-SWITCH30-MIB::vlanMemberPort12,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.18,MS-SWITCH30-MIB::vlanMemberPort13,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.19,MS-SWITCH30-MIB::vlanMemberPort14,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.20,MS-SWITCH30-MIB::vlanMemberPort15,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.21,MS-SWITCH30-MIB::vlanMemberPort16,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.22,MS-SWITCH30-MIB::vlanMemberPort17,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.23,MS-SWITCH30-MIB::vlanMemberPort18,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.24,MS-SWITCH30-MIB::vlanMemberPort19,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.25,MS-SWITCH30-MIB::vlanMemberPort20,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.26,MS-SWITCH30-MIB::vlanMemberPort21,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.27,MS-SWITCH30-MIB::vlanMemberPort22,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.28,MS-SWITCH30-MIB::vlanMemberPort23,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.20.1.29,MS-SWITCH30-MIB::vlanMemberPort24,INTEGER,read-write,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.4.30,MS-SWITCH30-MIB::vlanFilterEnhTable,,not-accessible,,current,,This table contains the enhanced 
.1.3.6.1.4.1.3181.10.3.4.30.1,MS-SWITCH30-MIB::vlanFilterEnhTableEntry,,not-accessible,vlanFilterEnhId,current,,Entry in the vlan filter enhanced
.1.3.6.1.4.1.3181.10.3.4.30.1.1,MS-SWITCH30-MIB::vlanFilterEnhId,INTEGER,read-only,,current,,This entry contains the filter id for the 
.1.3.6.1.4.1.3181.10.3.4.30.1.2,MS-SWITCH30-MIB::vlanFilterEnhFlags,INTEGER,read-write,,current,,This Entry contains some flags for
.1.3.6.1.4.1.3181.10.3.4.30.1.3,MS-SWITCH30-MIB::vlanFilterEnhPriOverride,INTEGER,read-write,,current,,This entry contains the priority
.1.3.6.1.4.1.3181.10.3.5,MS-SWITCH30-MIB::prioritization,,,,,,
.1.3.6.1.4.1.3181.10.3.5.1,MS-SWITCH30-MIB::prioSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.5.2,MS-SWITCH30-MIB::prioQueueCount,INTEGER,read-only,,current,,This entry defines the number of queues 
.1.3.6.1.4.1.3181.10.3.5.3,MS-SWITCH30-MIB::prioQueueScheme,INTEGER,read-write,,current,weighted(1):fixed(2):unsupported(255),This entry defines the queue scheme for 
.1.3.6.1.4.1.3181.10.3.5.4,MS-SWITCH30-MIB::prioPortEnable,INTEGER,read-only,,current,enabled(1):disabled(2):unsupported(255),Hardwaret prioritization of the device is 
.1.3.6.1.4.1.3181.10.3.5.5,MS-SWITCH30-MIB::prioIeeeTagEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),If enabled, a IEEE 802.1p tagged frame 
.1.3.6.1.4.1.3181.10.3.5.6,MS-SWITCH30-MIB::prioDiffservEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),If enabled a tagged frame will be mapped 
.1.3.6.1.4.1.3181.10.3.5.10,MS-SWITCH30-MIB::prioPortTable,,not-accessible,,current,,This table contains the port prioritization 
.1.3.6.1.4.1.3181.10.3.5.10.1,MS-SWITCH30-MIB::prioPortTableEntry,,not-accessible,prioPortId,current,,Entry in the port prioritization table.
.1.3.6.1.4.1.3181.10.3.5.10.1.1,MS-SWITCH30-MIB::prioPortId,INTEGER,read-only,,current,,This entry describes the device's port id.
.1.3.6.1.4.1.3181.10.3.5.10.1.2,MS-SWITCH30-MIB::prioPortQueue,INTEGER,read-write,,current,,This entry describes the selected queue 
.1.3.6.1.4.1.3181.10.3.5.20,MS-SWITCH30-MIB::prioIeeeTagTable,,not-accessible,,current,,This table contains the configuuration of 
.1.3.6.1.4.1.3181.10.3.5.20.1,MS-SWITCH30-MIB::prioIeeeTagTableEntry,,not-accessible,prioIeeeTagId,current,,Entry in the IEEE 802.1p tag prioritization 
.1.3.6.1.4.1.3181.10.3.5.20.1.1,MS-SWITCH30-MIB::prioIeeeTagId,INTEGER,read-only,,current,,This entry defines the IEEE 802.1p tag a 
.1.3.6.1.4.1.3181.10.3.5.20.1.2,MS-SWITCH30-MIB::prioIeeeTagQueue,INTEGER,read-write,,current,,This entry describes the selected queue 
.1.3.6.1.4.1.3181.10.3.5.30,MS-SWITCH30-MIB::prioDiffservTable,,not-accessible,,current,,This table contains the configuuration 
.1.3.6.1.4.1.3181.10.3.5.30.1,MS-SWITCH30-MIB::prioDiffservTableEntry,,not-accessible,prioDiffservId,current,,Entry in the Diffserv prioritization table.
.1.3.6.1.4.1.3181.10.3.5.30.1.1,MS-SWITCH30-MIB::prioDiffservId,INTEGER,read-only,,current,,This entry defines the Diffserv index a 
.1.3.6.1.4.1.3181.10.3.5.30.1.2,MS-SWITCH30-MIB::prioDiffservQueue,INTEGER,read-write,,current,,This entry describes the selected queue 
.1.3.6.1.4.1.3181.10.3.6,MS-SWITCH30-MIB::monitor,,,,,,
.1.3.6.1.4.1.3181.10.3.6.1,MS-SWITCH30-MIB::monitorSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.6.2,MS-SWITCH30-MIB::monitorMode,INTEGER,read-write,,current,txonly(1):both(2):disabled(3):hubmode(4):unsupported(255),This entry enables or disables monitoring
.1.3.6.1.4.1.3181.10.3.6.3,MS-SWITCH30-MIB::monitorSource,INTEGER,read-write,,current,,This entry contains the monitor source 
.1.3.6.1.4.1.3181.10.3.6.4,MS-SWITCH30-MIB::monitorDestination,INTEGER,read-write,,current,,This entry contains the monitor 
.1.3.6.1.4.1.3181.10.3.7,MS-SWITCH30-MIB::ring,,,,,,
.1.3.6.1.4.1.3181.10.3.7.1,MS-SWITCH30-MIB::ringSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.7.2,MS-SWITCH30-MIB::ringCount,INTEGER,read-only,,current,,The number of supported rings on this system.
.1.3.6.1.4.1.3181.10.3.7.10,MS-SWITCH30-MIB::ringTable,,not-accessible,,current,,This table contains the ring configuration 
.1.3.6.1.4.1.3181.10.3.7.10.1,MS-SWITCH30-MIB::ringTableEntry,,not-accessible,ringId,current,,Entry in the ring configuration table.
.1.3.6.1.4.1.3181.10.3.7.10.1.1,MS-SWITCH30-MIB::ringId,INTEGER,read-only,,current,,This entry describes the ring id.
.1.3.6.1.4.1.3181.10.3.7.10.1.2,MS-SWITCH30-MIB::ringMode,INTEGER,read-write,,current,slave(1):master(2):disabled(3):unsupported(255),This entry enables or disables ring mode
.1.3.6.1.4.1.3181.10.3.7.10.1.3,MS-SWITCH30-MIB::ringPortA,INTEGER,read-write,,current,,This entry defines port A for the ring 
.1.3.6.1.4.1.3181.10.3.7.10.1.4,MS-SWITCH30-MIB::ringPortB,INTEGER,read-write,,current,,This entry defines port B for the ring 
.1.3.6.1.4.1.3181.10.3.7.10.1.5,MS-SWITCH30-MIB::ringNumber,INTEGER,read-write,,current,,This entry defines the ring ID number.
.1.3.6.1.4.1.3181.10.3.7.10.1.6,MS-SWITCH30-MIB::ringStatus,INTEGER,read-only,,current,ringOk(1):ringFailure(2):ringDisabled(3):unsupported(255),This entry defines the ring status.
.1.3.6.1.4.1.3181.10.3.7.10.1.7,MS-SWITCH30-MIB::ringAlarmDuration,TimeTicks,read-only,,current,,Duration of ring alarm status (in 0.01s).
.1.3.6.1.4.1.3181.10.3.8,MS-SWITCH30-MIB::couplingred,,,,,,
.1.3.6.1.4.1.3181.10.3.8.1,MS-SWITCH30-MIB::couplingredSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if ring 
.1.3.6.1.4.1.3181.10.3.8.2,MS-SWITCH30-MIB::couplingredPort,INTEGER,read-write,,current,,This entry defines the port for the ring 
.1.3.6.1.4.1.3181.10.3.8.3,MS-SWITCH30-MIB::couplingredMode,INTEGER,read-write,,current,backup(1):main(2):disabled(3):unsupported(255),This entry enables or disables ring 
.1.3.6.1.4.1.3181.10.3.8.4,MS-SWITCH30-MIB::couplingredPartnerIpv4Address,IpAddress,read-write,,current,,This entry defines the IPv4 address of the 
.1.3.6.1.4.1.3181.10.3.8.5,MS-SWITCH30-MIB::couplingredStatus,INTEGER,read-only,,current,disabled(0):blocked(1):link(2):forwarding(3):standby(4):undefined(5):unsupported(255),This entry defines the ring coupling 
.1.3.6.1.4.1.3181.10.3.8.6,MS-SWITCH30-MIB::couplingredPartnerStatus,INTEGER,read-only,,current,disabled(0):blocked(1):link(2):forwarding(3):standby(4):undefined(5):unsupported(255),This entry defines the ring coupling 
.1.3.6.1.4.1.3181.10.3.8.7,MS-SWITCH30-MIB::couplingredValidationFlag,INTEGER,read-only,,current,,This entry defines the validation 
.1.3.6.1.4.1.3181.10.3.9,MS-SWITCH30-MIB::sfp,,,,,,
.1.3.6.1.4.1.3181.10.3.9.1,MS-SWITCH30-MIB::sfpSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.9.2,MS-SWITCH30-MIB::sfpCount,INTEGER,read-only,,current,,The number of supported sfp modules.
.1.3.6.1.4.1.3181.10.3.9.10,MS-SWITCH30-MIB::sfpTable,,not-accessible,,current,,This table contains the sfp module 
.1.3.6.1.4.1.3181.10.3.9.10.1,MS-SWITCH30-MIB::sfpTableEntry,,not-accessible,sfpId,current,,Entry in the sfp status table.
.1.3.6.1.4.1.3181.10.3.9.10.1.1,MS-SWITCH30-MIB::sfpId,INTEGER,read-only,,current,,This entry describes the sfp id.
.1.3.6.1.4.1.3181.10.3.9.10.1.2,MS-SWITCH30-MIB::sfpPortnumber,INTEGER,read-only,,current,,This entry describes the number of the port
.1.3.6.1.4.1.3181.10.3.9.10.1.3,MS-SWITCH30-MIB::sfpDetect,INTEGER,read-only,,current,plugged(1):unplugged(2):unsupported(255),This entry enables or disables uplink 
.1.3.6.1.4.1.3181.10.3.9.10.1.4,MS-SWITCH30-MIB::sfpVendor,OCTET,read-only,,current,,This entry describes the vendor name of 
.1.3.6.1.4.1.3181.10.3.9.10.1.5,MS-SWITCH30-MIB::sfpVendorPartnumber,OCTET,read-only,,current,,This entry describes the vendor 
.1.3.6.1.4.1.3181.10.3.9.10.1.6,MS-SWITCH30-MIB::sfpVendorSerialnumber,OCTET,read-only,,current,,This entry describes the vendor 
.1.3.6.1.4.1.3181.10.3.9.10.1.7,MS-SWITCH30-MIB::sfpConnector,INTEGER,read-only,,current,connSC(1):connLC(7):connMTRJ(8):unsupported(255),This entry describes the type of 
.1.3.6.1.4.1.3181.10.3.9.10.1.8,MS-SWITCH30-MIB::sfpNominalBitrate,INTEGER,read-only,,current,,This entry describes the nominal bitrate 
.1.3.6.1.4.1.3181.10.3.9.10.1.9,MS-SWITCH30-MIB::sfpDiagnostic,INTEGER,read-only,,current,supportedWithInternalCalibration(1):supportedWithExternalCalibration(2):undefined(254):unsupported(255),This entry describes tha avalability and 
.1.3.6.1.4.1.3181.10.3.9.10.1.10,MS-SWITCH30-MIB::sfpTemperature,INTEGER,read-only,,current,,This entry describes the temperature of 
.1.3.6.1.4.1.3181.10.3.9.10.1.11,MS-SWITCH30-MIB::sfpVoltage,INTEGER,read-only,,current,,This entry describes the supply voltage 
.1.3.6.1.4.1.3181.10.3.9.10.1.12,MS-SWITCH30-MIB::sfpTxBias,INTEGER,read-only,,current,,This entry describes the transmit bias 
.1.3.6.1.4.1.3181.10.3.9.10.1.13,MS-SWITCH30-MIB::sfpTxPower,INTEGER,read-only,,current,,This entry describes the optical transmit 
.1.3.6.1.4.1.3181.10.3.9.10.1.14,MS-SWITCH30-MIB::sfpRxPower,INTEGER,read-only,,current,,This entry describes the ooptical receive 
.1.3.6.1.4.1.3181.10.3.9.10.1.15,MS-SWITCH30-MIB::sfpWarnings,BITS,read-only,,current,tempHighWarn(0):tempLowWarn(1):vccHighWarn(2):vccLowWarn(3):txBiasHighWarn(4):txBiasLowWarn(5):txPowerHighWarn(6):txPowerLowWarn(7):rxPowerHighWarn(8):rxPowerLowWarn(9),This entry contains the flags for internal
.1.3.6.1.4.1.3181.10.3.9.10.1.16,MS-SWITCH30-MIB::sfpAlarms,BITS,read-only,,current,tempHighAlarm(0):tempLowAlarm(1):vccHighAlarm(2):vccLowAlarm(3):txBiasHighAlarm(4):txBiasLowAlarm(5):txPowerHighAlarm(6):txPowerLowAlarm(7):rxPowerHighAlarm(8):rxPowerLowAlarm(9),This entry contains the flags for internal
.1.3.6.1.4.1.3181.10.3.11,MS-SWITCH30-MIB::relais,,,,,,
.1.3.6.1.4.1.3181.10.3.11.1,MS-SWITCH30-MIB::relaisSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.11.2,MS-SWITCH30-MIB::relaisCount,INTEGER,read-only,,current,,The number of supported relais on this 
.1.3.6.1.4.1.3181.10.3.11.10,MS-SWITCH30-MIB::relaisTable,,not-accessible,,current,,This table contains the relais 
.1.3.6.1.4.1.3181.10.3.11.10.1,MS-SWITCH30-MIB::relaisTableEntry,,not-accessible,relaisId,current,,Entry in the relais configuration table.
.1.3.6.1.4.1.3181.10.3.11.10.1.1,MS-SWITCH30-MIB::relaisId,INTEGER,read-only,,current,,This entry describes the relais id.
.1.3.6.1.4.1.3181.10.3.11.10.1.2,MS-SWITCH30-MIB::relaisAlias,OCTET,read-write,,current,,This entry contains an individual name 
.1.3.6.1.4.1.3181.10.3.11.10.1.3,MS-SWITCH30-MIB::relaisMode,INTEGER,read-write,,current,openOnEvent(1):closeOnEvent(2):unsupported(255),This entry describes the bahaviour of 
.1.3.6.1.4.1.3181.10.3.11.10.1.4,MS-SWITCH30-MIB::relaisStatus,INTEGER,read-write,,current,closed(1):opened(2):unsupported(255),This entry describes the present status 
.1.3.6.1.4.1.3181.10.3.12,MS-SWITCH30-MIB::portaccessctrl,,,,,,
.1.3.6.1.4.1.3181.10.3.12.1,MS-SWITCH30-MIB::pacSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.12.2,MS-SWITCH30-MIB::pacEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables port 
.1.3.6.1.4.1.3181.10.3.12.3,MS-SWITCH30-MIB::pacUnauthMode,INTEGER,read-only,,current,block(1):useDefaultVID(2):unsupported(255),The entry describes the mode of 
.1.3.6.1.4.1.3181.10.3.12.4,MS-SWITCH30-MIB::pacUnauthVID,INTEGER,read-write,,current,,This entry describes the default VID for 
.1.3.6.1.4.1.3181.10.3.12.5,MS-SWITCH30-MIB::pacMaxNumberOfAllowedHostsPerPort,INTEGER,read-only,,current,,The value contains the maximum number of 
.1.3.6.1.4.1.3181.10.3.12.6,MS-SWITCH30-MIB::pacFallbackRequestEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if authentication
.1.3.6.1.4.1.3181.10.3.12.7,MS-SWITCH30-MIB::pacFallbackRequestTimeout,INTEGER,read-write,,current,,This entry contains the timeout value in 
.1.3.6.1.4.1.3181.10.3.12.8,MS-SWITCH30-MIB::pacFallbackRejectsEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if authentication
.1.3.6.1.4.1.3181.10.3.12.9,MS-SWITCH30-MIB::pacFallbackMaxRejects,INTEGER,read-write,,current,,This entry contains the maximum number of
.1.3.6.1.4.1.3181.10.3.12.10,MS-SWITCH30-MIB::pacSupplicantTimeout,INTEGER,read-write,,current,,This entry contains the Supplicant 
.1.3.6.1.4.1.3181.10.3.12.11,MS-SWITCH30-MIB::pacReauthEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if reauthentication
.1.3.6.1.4.1.3181.10.3.12.12,MS-SWITCH30-MIB::pacReauthTime,INTEGER,read-write,,current,,This entry contains the reauthentication
.1.3.6.1.4.1.3181.10.3.12.100,MS-SWITCH30-MIB::pacStatusTable,,not-accessible,,current,,This table contains the port status
.1.3.6.1.4.1.3181.10.3.12.100.1,MS-SWITCH30-MIB::pacStatusTableEntry,,not-accessible,pacStatPortId,current,,Entry in the port access control 
.1.3.6.1.4.1.3181.10.3.12.100.1.1,MS-SWITCH30-MIB::pacStatPortId,INTEGER,read-only,,current,,This entry describes the port id.
.1.3.6.1.4.1.3181.10.3.12.100.1.2,MS-SWITCH30-MIB::pacStatPortMode,INTEGER,read-only,,current,forceAuthorized(1):macLocking(2):radiusMacAuthentication(3):ieee8021XAuthentication(4):forceUnauthorized(5):parallel8021XMACauth(6):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.100.1.3,MS-SWITCH30-MIB::pacStatPortStatus,INTEGER,read-only,,current,authorized(1):unauthorized(2):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.100.1.4,MS-SWITCH30-MIB::pacStatUserStatus1,INTEGER,read-only,,current,authorized1(10):unauthorized1(11):tobedone1(12):authorized2(20):unauthorized2(21):tobedone2(22):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.100.1.5,MS-SWITCH30-MIB::pacStatUserStatus2,INTEGER,read-only,,current,authorized1(10):unauthorized1(11):tobedone1(12):authorized2(20):unauthorized2(21):tobedone2(22):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.100.1.6,MS-SWITCH30-MIB::pacStatUserStatus3,INTEGER,read-only,,current,authorized1(10):unauthorized1(11):tobedone1(12):authorized2(20):unauthorized2(21):tobedone2(22):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.100.1.7,MS-SWITCH30-MIB::pacStatUserStatus4,INTEGER,read-only,,current,authorized1(10):unauthorized1(11):tobedone1(12):authorized2(20):unauthorized2(21):tobedone2(22):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.100.1.8,MS-SWITCH30-MIB::pacStatUserMac1,OCTET,read-only,,current,,This entry contains the 1st host 
.1.3.6.1.4.1.3181.10.3.12.100.1.9,MS-SWITCH30-MIB::pacStatUserMac2,OCTET,read-only,,current,,This entry contains the 2nd host 
.1.3.6.1.4.1.3181.10.3.12.100.1.10,MS-SWITCH30-MIB::pacStatUserMac3,OCTET,read-only,,current,,This entry contains the 3rd host 
.1.3.6.1.4.1.3181.10.3.12.100.1.11,MS-SWITCH30-MIB::pacStatUserMac4,OCTET,read-only,,current,,This entry contains the 4th host 
.1.3.6.1.4.1.3181.10.3.12.100.1.12,MS-SWITCH30-MIB::pacStatUserName1,OCTET,read-only,,current,,This entry contains the 1st host 
.1.3.6.1.4.1.3181.10.3.12.100.1.13,MS-SWITCH30-MIB::pacStatUserName2,OCTET,read-only,,current,,This entry contains the 2nd host 
.1.3.6.1.4.1.3181.10.3.12.100.1.14,MS-SWITCH30-MIB::pacStatUserName3,OCTET,read-only,,current,,This entry contains the 3rd host 
.1.3.6.1.4.1.3181.10.3.12.100.1.15,MS-SWITCH30-MIB::pacStatUserName4,OCTET,read-only,,current,,This entry contains the 4th host 
.1.3.6.1.4.1.3181.10.3.12.100.1.16,MS-SWITCH30-MIB::pacStatUserIp1,IpAddress,read-only,,current,,This entry contains the 1st host 
.1.3.6.1.4.1.3181.10.3.12.100.1.17,MS-SWITCH30-MIB::pacStatUserIp2,IpAddress,read-only,,current,,This entry contains the 2nd host 
.1.3.6.1.4.1.3181.10.3.12.100.1.18,MS-SWITCH30-MIB::pacStatUserIp3,IpAddress,read-only,,current,,This entry contains the 3rd host 
.1.3.6.1.4.1.3181.10.3.12.100.1.19,MS-SWITCH30-MIB::pacStatUserIp4,IpAddress,read-only,,current,,This entry contains the 4th host 
.1.3.6.1.4.1.3181.10.3.12.110,MS-SWITCH30-MIB::pacConfigTable,,not-accessible,,current,,This table contains the port status
.1.3.6.1.4.1.3181.10.3.12.110.1,MS-SWITCH30-MIB::pacConfigTableEntry,,not-accessible,pacConfPortId,current,,Entry in the port access control 
.1.3.6.1.4.1.3181.10.3.12.110.1.1,MS-SWITCH30-MIB::pacConfPortId,INTEGER,read-only,,current,,This entry describes the port id.
.1.3.6.1.4.1.3181.10.3.12.110.1.2,MS-SWITCH30-MIB::pacConfMode,INTEGER,read-write,,current,forceAuthorized(1):macLocking(2):radiusMacAuthentication(3):ieee8021xAuthentication(4):forceUnauthorized(5):parallel8021XMACauth(6):undefined(254):unsupported(255),This entry describes the port 
.1.3.6.1.4.1.3181.10.3.12.110.1.3,MS-SWITCH30-MIB::pacConfMaxMacCount,INTEGER,read-write,,current,,This entry contains the maximum number of 
.1.3.6.1.4.1.3181.10.3.12.120,MS-SWITCH30-MIB::pacMacLockingTable,,not-accessible,,current,,This table contains the port status
.1.3.6.1.4.1.3181.10.3.12.120.1,MS-SWITCH30-MIB::pacMacLockTableEntry,,not-accessible,pacMacLockPortId,current,,Entry in the port access control 
.1.3.6.1.4.1.3181.10.3.12.120.1.1,MS-SWITCH30-MIB::pacMacLockPortId,INTEGER,read-only,,current,,This entry describes the port id.
.1.3.6.1.4.1.3181.10.3.12.120.1.2,MS-SWITCH30-MIB::pacMacLockEnable1,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if the host with
.1.3.6.1.4.1.3181.10.3.12.120.1.3,MS-SWITCH30-MIB::pacMacLockEnable2,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if the host with
.1.3.6.1.4.1.3181.10.3.12.120.1.4,MS-SWITCH30-MIB::pacMacLockEnable3,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if the host with
.1.3.6.1.4.1.3181.10.3.12.120.1.5,MS-SWITCH30-MIB::pacMacLockEnable4,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes if the host with
.1.3.6.1.4.1.3181.10.3.12.120.1.6,MS-SWITCH30-MIB::pacMacLockLearn1,INTEGER,read-write,,current,learn(1):fixed(2):unsupported(255),This entry describes if the 1st 
.1.3.6.1.4.1.3181.10.3.12.120.1.7,MS-SWITCH30-MIB::pacMacLockLearn2,INTEGER,read-write,,current,learn(1):fixed(2):unsupported(255),This entry describes if the 2nd 
.1.3.6.1.4.1.3181.10.3.12.120.1.8,MS-SWITCH30-MIB::pacMacLockLearn3,INTEGER,read-write,,current,learn(1):fixed(2):unsupported(255),This entry describes if the 3rd 
.1.3.6.1.4.1.3181.10.3.12.120.1.9,MS-SWITCH30-MIB::pacMacLockLearn4,INTEGER,read-write,,current,learn(1):fixed(2):unsupported(255),This entry describes if the 4th 
.1.3.6.1.4.1.3181.10.3.12.120.1.10,MS-SWITCH30-MIB::pacLockedMac1,OCTET,read-write,,current,,This entry contains the 1st 
.1.3.6.1.4.1.3181.10.3.12.120.1.11,MS-SWITCH30-MIB::pacLockedMac2,OCTET,read-write,,current,,This entry contains the 2nd 
.1.3.6.1.4.1.3181.10.3.12.120.1.12,MS-SWITCH30-MIB::pacLockedMac3,OCTET,read-write,,current,,This entry contains the 3rd 
.1.3.6.1.4.1.3181.10.3.12.120.1.13,MS-SWITCH30-MIB::pacLockedMac4,OCTET,read-write,,current,,This entry contains the 4th 
.1.3.6.1.4.1.3181.10.3.13,MS-SWITCH30-MIB::igmps,,,,,,
.1.3.6.1.4.1.3181.10.3.13.1,MS-SWITCH30-MIB::igmpsSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.13.2,MS-SWITCH30-MIB::igmpsEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.13.3,MS-SWITCH30-MIB::igmpsFastLeave,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.13.4,MS-SWITCH30-MIB::igmpsReportAggregation,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.13.5,MS-SWITCH30-MIB::igmpsFloodingUnregPack,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.13.6,MS-SWITCH30-MIB::igmpsMaxGroupLimit,INTEGER,read-only,,current,,This entry defines the maximum 
.1.3.6.1.4.1.3181.10.3.13.7,MS-SWITCH30-MIB::igmpsGroupLimit,INTEGER,read-write,,current,,This entry defines the Multicast 
.1.3.6.1.4.1.3181.10.3.13.8,MS-SWITCH30-MIB::igmpsGroupNumber,INTEGER,read-only,,current,,This entry defines the present 
.1.3.6.1.4.1.3181.10.3.13.9,MS-SWITCH30-MIB::igmpsRouterDetection,INTEGER,read-write,,current,discovery(1):query(2):unsupported(255),This entry defines the mode of
.1.3.6.1.4.1.3181.10.3.13.10,MS-SWITCH30-MIB::igmpsGroupMembershipInterval,INTEGER,read-write,,current,,This entry defines the Multicast
.1.3.6.1.4.1.3181.10.3.13.11,MS-SWITCH30-MIB::igmpsMaximumResposeTime,INTEGER,read-write,,current,,This entry defines the Multicast
.1.3.6.1.4.1.3181.10.3.13.12,MS-SWITCH30-MIB::igmpsLastMemeberQueryTime,INTEGER,read-write,,current,,This entry defines the Multicast
.1.3.6.1.4.1.3181.10.3.13.13,MS-SWITCH30-MIB::igmpsNeighborDeadInterval,INTEGER,read-write,,current,,This entry defines the Multicast
.1.3.6.1.4.1.3181.10.3.13.14,MS-SWITCH30-MIB::igmpsRouterAgingTime,INTEGER,read-write,,current,,This entry defines the Multicast
.1.3.6.1.4.1.3181.10.3.13.15,MS-SWITCH30-MIB::igmpsRxMessageGeneralQuery,INTEGER,read-only,,current,,This is a counter for received 
.1.3.6.1.4.1.3181.10.3.13.16,MS-SWITCH30-MIB::igmpsRxMessageSpecificQuery,INTEGER,read-only,,current,,This is a counter for received 
.1.3.6.1.4.1.3181.10.3.13.17,MS-SWITCH30-MIB::igmpsRxMessageReport,INTEGER,read-only,,current,,This is a counter for received 
.1.3.6.1.4.1.3181.10.3.13.18,MS-SWITCH30-MIB::igmpsRxMessageLeave,INTEGER,read-only,,current,,This is a counter for received 
.1.3.6.1.4.1.3181.10.3.13.19,MS-SWITCH30-MIB::igmpsRxMessageAdvertisement,INTEGER,read-only,,current,,This is a counter for received 
.1.3.6.1.4.1.3181.10.3.13.20,MS-SWITCH30-MIB::igmpsRxMessageTermination,INTEGER,read-only,,current,,This is a counter for received 
.1.3.6.1.4.1.3181.10.3.13.21,MS-SWITCH30-MIB::igmpsTxMessageSolicitation,INTEGER,read-only,,current,,This is a counter for transmitted 
.1.3.6.1.4.1.3181.10.3.13.22,MS-SWITCH30-MIB::igmpsCounterReset,INTEGER,read-write,,current,normalOperation(0):reset(1):unsupported(255),Set this entry to '1' to reset the 
.1.3.6.1.4.1.3181.10.3.13.30,MS-SWITCH30-MIB::igmpsPortTable,,not-accessible,,current,,This table contains port status information 
.1.3.6.1.4.1.3181.10.3.13.30.1,MS-SWITCH30-MIB::igmpsPortTableEntry,,not-accessible,igmpsPortId,current,,Entry in the port value table.
.1.3.6.1.4.1.3181.10.3.13.30.1.1,MS-SWITCH30-MIB::igmpsPortId,INTEGER,read-only,,current,,This entry describes the port id.
.1.3.6.1.4.1.3181.10.3.13.30.1.2,MS-SWITCH30-MIB::igmpsPortSnooping,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry determines if the port
.1.3.6.1.4.1.3181.10.3.13.30.1.3,MS-SWITCH30-MIB::igmpsPortStaticRouter,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry determins if the port 
.1.3.6.1.4.1.3181.10.3.13.30.1.4,MS-SWITCH30-MIB::igmpsPortDynamicRouter,INTEGER,read-only,,current,detected(1):undetected(2):unsupported(255),This entry ddocuments if a router 
.1.3.6.1.4.1.3181.10.3.13.40,MS-SWITCH30-MIB::igmpsGroupTable,,not-accessible,,current,,This table contains port status information 
.1.3.6.1.4.1.3181.10.3.13.40.1,MS-SWITCH30-MIB::igmpsGroupTableEntry,,not-accessible,igmpsGroupId,current,,Entry in the port value table.
.1.3.6.1.4.1.3181.10.3.13.40.1.1,MS-SWITCH30-MIB::igmpsGroupId,Unsigned32,read-only,,current,,This entry describes the Multicast 
.1.3.6.1.4.1.3181.10.3.13.40.1.2,MS-SWITCH30-MIB::igmpsGroupMac,OCTET,read-only,,current,,This entry documents the Multicast Group's 
.1.3.6.1.4.1.3181.10.3.13.40.1.3,MS-SWITCH30-MIB::igmpsGroupVlanId,INTEGER,read-only,,current,,This entry documents the Vlan ID 
.1.3.6.1.4.1.3181.10.3.13.40.1.4,MS-SWITCH30-MIB::igmpsGroupTimestamp,INTEGER,read-only,,current,,This entry documents the Timestamp 
.1.3.6.1.4.1.3181.10.3.13.40.1.5,MS-SWITCH30-MIB::igmpsGroupLeaveFlag,INTEGER,read-only,,current,set(1):unset(2):unsupported(255),This entry documents if the Leave
.1.3.6.1.4.1.3181.10.3.13.40.1.6,MS-SWITCH30-MIB::igmpsGroupMemberPort1,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.7,MS-SWITCH30-MIB::igmpsGroupMemberPort2,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.8,MS-SWITCH30-MIB::igmpsGroupMemberPort3,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.9,MS-SWITCH30-MIB::igmpsGroupMemberPort4,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.10,MS-SWITCH30-MIB::igmpsGroupMemberPort5,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.11,MS-SWITCH30-MIB::igmpsGroupMemberPort6,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.12,MS-SWITCH30-MIB::igmpsGroupMemberPort7,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.13,MS-SWITCH30-MIB::igmpsGroupMemberPort8,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.14,MS-SWITCH30-MIB::igmpsGroupMemberPort9,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.15,MS-SWITCH30-MIB::igmpsGroupMemberPort10,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.16,MS-SWITCH30-MIB::igmpsGroupMemberPort11,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.17,MS-SWITCH30-MIB::igmpsGroupMemberPort12,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.18,MS-SWITCH30-MIB::igmpsGroupMemberPort13,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.19,MS-SWITCH30-MIB::igmpsGroupMemberPort14,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.20,MS-SWITCH30-MIB::igmpsGroupMemberPort15,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.21,MS-SWITCH30-MIB::igmpsGroupMemberPort16,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.22,MS-SWITCH30-MIB::igmpsGroupMemberPort17,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.23,MS-SWITCH30-MIB::igmpsGroupMemberPort18,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.24,MS-SWITCH30-MIB::igmpsGroupMemberPort19,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.25,MS-SWITCH30-MIB::igmpsGroupMemberPort20,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.26,MS-SWITCH30-MIB::igmpsGroupMemberPort21,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.27,MS-SWITCH30-MIB::igmpsGroupMemberPort22,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.28,MS-SWITCH30-MIB::igmpsGroupMemberPort23,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.13.40.1.29,MS-SWITCH30-MIB::igmpsGroupMemberPort24,INTEGER,read-only,,current,yes(1):no(2):unsupported(255),This entry defines the membership of 
.1.3.6.1.4.1.3181.10.3.15,MS-SWITCH30-MIB::rtc,,,,,,
.1.3.6.1.4.1.3181.10.3.15.1,MS-SWITCH30-MIB::rtcSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.15.2,MS-SWITCH30-MIB::rtcFlags,INTEGER,read-write,,current,sntpenabled(1):dstenabled(2):unsupported(255),This Entry contains per port some bitwise 
.1.3.6.1.4.1.3181.10.3.15.3,MS-SWITCH30-MIB::rtcLocalTime,OCTET,read-only,,current,,This entry contains the local date 
.1.3.6.1.4.1.3181.10.3.15.4,MS-SWITCH30-MIB::rtcManualTime,OCTET,read-write,,current,,On readout this entry contains the local 
.1.3.6.1.4.1.3181.10.3.15.5,MS-SWITCH30-MIB::rtcTimeStatus,INTEGER,read-only,,current,unset(1):manuallyset(2):synchronized(3):unsynchronized(4):unsupported(255),This entry contains the information 
.1.3.6.1.4.1.3181.10.3.15.6,MS-SWITCH30-MIB::rtcTimezoneOffset,INTEGER,read-write,,current,,This entry describes the time offset to UTC 
.1.3.6.1.4.1.3181.10.3.15.7,MS-SWITCH30-MIB::rtcDSTOffset,INTEGER,read-write,,current,,This entry describes the time offset to UTC 
.1.3.6.1.4.1.3181.10.3.15.8,MS-SWITCH30-MIB::rtcDSTbegin,OCTET,read-write,,current,,This entry contains the hexadecimal represenation 
.1.3.6.1.4.1.3181.10.3.15.9,MS-SWITCH30-MIB::rtcDSTend,OCTET,read-write,,current,,This entry contains the hexadecimal represenation 
.1.3.6.1.4.1.3181.10.3.15.10,MS-SWITCH30-MIB::rtcDSTstatus,INTEGER,read-only,,current,isdst(1):isnotdst(2):unsupported(255),If DST support is enabled this entry 
.1.3.6.1.4.1.3181.10.3.15.11,MS-SWITCH30-MIB::rtcSNTPsyncInterval,INTEGER,read-write,,current,,This entry describes the time interval 
.1.3.6.1.4.1.3181.10.3.15.12,MS-SWITCH30-MIB::rtcSNTPsyncNow,INTEGER,read-write,,current,normalOperation(0):syncNow(1):unsupported(255),Set this entry to '1' to trigger a rtc 
.1.3.6.1.4.1.3181.10.3.15.13,MS-SWITCH30-MIB::rtcSNTPServerCount,INTEGER,read-only,,current,,The number of supported SNTP servers 
.1.3.6.1.4.1.3181.10.3.15.20,MS-SWITCH30-MIB::rtcSNTPServerTable,,not-accessible,,current,,This table contains the configuration for 
.1.3.6.1.4.1.3181.10.3.15.20.1,MS-SWITCH30-MIB::rtcSNTPServerTableEntry,,not-accessible,rtcSNTPServerId,current,,Entry in the SNTP server table.
.1.3.6.1.4.1.3181.10.3.15.20.1.1,MS-SWITCH30-MIB::rtcSNTPServerId,INTEGER,read-only,,current,,This entry contains the SNTP server ID.
.1.3.6.1.4.1.3181.10.3.15.20.1.2,MS-SWITCH30-MIB::rtcSNTPServerStatus,INTEGER,read-only,,current,ok(0):busy(1):timeout(2):nomemory(3):portbusy(4):alarm(5):unknown(7):unsupported(255),This entry describes the SNTP server 
.1.3.6.1.4.1.3181.10.3.15.20.1.3,MS-SWITCH30-MIB::rtcSNTPServerEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes the SNTP server 
.1.3.6.1.4.1.3181.10.3.15.20.1.4,MS-SWITCH30-MIB::rtcSNTPServerIpv4Address,IpAddress,read-write,,current,,This entry describes the SNTP
.1.3.6.1.4.1.3181.10.3.20,MS-SWITCH30-MIB::consoleinterface,,,,,,
.1.3.6.1.4.1.3181.10.3.20.1,MS-SWITCH30-MIB::consoleSupport,INTEGER,read-only,,current,,This entry contains the bitwise information 
.1.3.6.1.4.1.3181.10.3.20.2,MS-SWITCH30-MIB::consoleEnable,INTEGER,read-write,,current,,This entry contains the bitwise information 
.1.3.6.1.4.1.3181.10.3.20.3,MS-SWITCH30-MIB::consoleTimeout,INTEGER,read-write,,current,,This entry describes the timout value in 
.1.3.6.1.4.1.3181.10.3.20.4,MS-SWITCH30-MIB::consoleApplyMode,INTEGER,read-write,,current,applyAndSaveImmediately(1):saveManually(2):applyAndSaveManually(3),If this entry is set to '1' changes due 
.1.3.6.1.4.1.3181.10.3.20.5,MS-SWITCH30-MIB::consolePrompt,OCTET,read-write,,current,,This is the string used as prompt
.1.3.6.1.4.1.3181.10.3.21,MS-SWITCH30-MIB::webinterface,,,,,,
.1.3.6.1.4.1.3181.10.3.21.1,MS-SWITCH30-MIB::webSupport,INTEGER,read-only,,current,,This entry contains the bitwise information 
.1.3.6.1.4.1.3181.10.3.21.2,MS-SWITCH30-MIB::webEnable,INTEGER,read-write,,current,,This entry contains the bitwise information 
.1.3.6.1.4.1.3181.10.3.22,MS-SWITCH30-MIB::snmpinterface,,,,,,
.1.3.6.1.4.1.3181.10.3.22.1,MS-SWITCH30-MIB::snmpSupport,INTEGER,read-only,,current,,This entry contains the bitwise information 
.1.3.6.1.4.1.3181.10.3.22.2,MS-SWITCH30-MIB::snmpEnable,INTEGER,read-write,,current,,This entry contains the bitwise information 
.1.3.6.1.4.1.3181.10.3.22.3,MS-SWITCH30-MIB::snmpApplyMode,INTEGER,read-write,,current,applyAndSaveImmediately(1):saveManually(2):applyAndSaveManually(3),If this entry is set to '1' changes due 
.1.3.6.1.4.1.3181.10.3.22.4,MS-SWITCH30-MIB::snmpApply,INTEGER,read-write,,current,normalOperation(0):applyNow(1):applyAndSaveNow(2),This entry only has an effect if 'snmpApplyMode'
.1.3.6.1.4.1.3181.10.3.22.5,MS-SWITCH30-MIB::snmpTrapTest,INTEGER,read-write,,current,inactive(0):genColdstart(1):genWarmstart(2):genLinkdown(3):genLinkup(4):genAuthfailure(5):genEgpneighborloss(6):entLinkchange(7):entFactoryreset(8):entTemplevelchange(9):entErrorcounter(10):entOverundervoltage(11):entTempshutdown(12):entPoelimitexceeded(13):entSupplystatuschange(14):entSfpplugchange(15):entLoginfailure(16):entRingbroken(17):entRingalarm(18):entAuthpwfail(19):entPrivpwfail(20):entAccesspermission(21):entSeclevelfail(22):unsupported(255),This entry triggers a trap event without 
.1.3.6.1.4.1.3181.10.3.22.6,MS-SWITCH30-MIB::snmpTrapDestCount,INTEGER,read-only,,current,,The number of supported trap destinations 
.1.3.6.1.4.1.3181.10.3.22.7,MS-SWITCH30-MIB::snmpCommunityRead,OCTET,read-write,,current,,This is the string used as community name
.1.3.6.1.4.1.3181.10.3.22.8,MS-SWITCH30-MIB::snmpCommunityWrite,OCTET,read-write,,current,,This is the string used as community name
.1.3.6.1.4.1.3181.10.3.22.9,MS-SWITCH30-MIB::snmpTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.22.10,MS-SWITCH30-MIB::snmpTrapDestTable,,not-accessible,,current,,This table contains information regarding 
.1.3.6.1.4.1.3181.10.3.22.10.1,MS-SWITCH30-MIB::snmpTrapDestTableEntry,,not-accessible,snmpTrapDestId,current,,Entry in the snmp table.
.1.3.6.1.4.1.3181.10.3.22.10.1.1,MS-SWITCH30-MIB::snmpTrapDestId,INTEGER,read-only,,current,,This entry describes the snmp trap 
.1.3.6.1.4.1.3181.10.3.22.10.1.2,MS-SWITCH30-MIB::snmpTrapDestAlias,OCTET,read-write,,current,,This entry contains an individual name 
.1.3.6.1.4.1.3181.10.3.22.10.1.3,MS-SWITCH30-MIB::snmpTrapDestEn,INTEGER,read-write,,current,disabled(0):v1(1):v2c(2):v3(3):unsupported(255),This entry describes the snmp trap 
.1.3.6.1.4.1.3181.10.3.22.10.1.4,MS-SWITCH30-MIB::snmpTrapDestIPv4Address,IpAddress,read-write,,current,,This is the trap receiver's IPv4 address.
.1.3.6.1.4.1.3181.10.3.22.10.1.5,MS-SWITCH30-MIB::snmpTrapDestCommunity,OCTET,read-write,,current,,This is the string used as community name 
.1.3.6.1.4.1.3181.10.3.22.10.1.6,MS-SWITCH30-MIB::snmpTrapGenColdstart,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.7,MS-SWITCH30-MIB::snmpTrapGenWarmstart,INTEGER,read-only,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.8,MS-SWITCH30-MIB::snmpTrapGenLinkDown,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.9,MS-SWITCH30-MIB::snmpTrapGenLinkUp,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.10,MS-SWITCH30-MIB::snmpTrapGenAuthFailure,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.11,MS-SWITCH30-MIB::snmpTrapGenEgpNeighborLoss,INTEGER,read-only,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.12,MS-SWITCH30-MIB::snmpTrapEntLinkChange,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.13,MS-SWITCH30-MIB::snmpTrapEntFactoryReset,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.14,MS-SWITCH30-MIB::snmpTrapEntTemperatureLevelChange,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.15,MS-SWITCH30-MIB::snmpTrapEntErrorCounter,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.16,MS-SWITCH30-MIB::snmpTrapEntUnderOverVoltage,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.17,MS-SWITCH30-MIB::snmpTrapEntTempShutDown,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.18,MS-SWITCH30-MIB::snmpTrapEntPoeLimitExceeded,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.19,MS-SWITCH30-MIB::snmpTrapEntSupplyStatusChange,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.20,MS-SWITCH30-MIB::snmpTrapEntSfpPlugChange,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.21,MS-SWITCH30-MIB::snmpTrapEntLoginFailure,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.22,MS-SWITCH30-MIB::snmpTrapEntRingBroken,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.23,MS-SWITCH30-MIB::snmpTrapEntRingAlarm,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.22.10.1.24,MS-SWITCH30-MIB::snmpTrapEntAuthPwFail,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables 
.1.3.6.1.4.1.3181.10.3.22.10.1.25,MS-SWITCH30-MIB::snmpTrapEntPrivPwFail,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables 
.1.3.6.1.4.1.3181.10.3.22.10.1.26,MS-SWITCH30-MIB::snmpTrapEntAccessPermission,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables 
.1.3.6.1.4.1.3181.10.3.22.10.1.27,MS-SWITCH30-MIB::snmpTrapEntSeclevelFail,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables 
.1.3.6.1.4.1.3181.10.3.23,MS-SWITCH30-MIB::udpinterface,,,,,,
.1.3.6.1.4.1.3181.10.3.23.1,MS-SWITCH30-MIB::udpSupport,INTEGER,read-only,,current,supported(1):umac(3):unsupported(255),This entry contains the information if the
.1.3.6.1.4.1.3181.10.3.23.2,MS-SWITCH30-MIB::udpEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry enables or disables the 
.1.3.6.1.4.1.3181.10.3.23.3,MS-SWITCH30-MIB::udpUmacEnable,INTEGER,read-only,,current,enabled(1):unsupported(255),This entry contains the information
.1.3.6.1.4.1.3181.10.3.24,MS-SWITCH30-MIB::syslog,,,,,,
.1.3.6.1.4.1.3181.10.3.24.1,MS-SWITCH30-MIB::syslogSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.24.2,MS-SWITCH30-MIB::syslogEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if
.1.3.6.1.4.1.3181.10.3.24.3,MS-SWITCH30-MIB::syslogMessageTest,INTEGER,read-write,,current,inactive(0):sendmessage(1):unsupported(255),This entry triggers a syslog message 
.1.3.6.1.4.1.3181.10.3.24.4,MS-SWITCH30-MIB::syslogDestCount,INTEGER,read-only,,current,,The number of supported syslog destinations 
.1.3.6.1.4.1.3181.10.3.24.10,MS-SWITCH30-MIB::syslogDestTable,,not-accessible,,current,,This table contains the configuration for 
.1.3.6.1.4.1.3181.10.3.24.10.1,MS-SWITCH30-MIB::syslogDestTableEntry,,not-accessible,syslogDestId,current,,Entry in the syslog destination table.
.1.3.6.1.4.1.3181.10.3.24.10.1.1,MS-SWITCH30-MIB::syslogDestId,INTEGER,read-only,,current,,This entry contains the syslog 
.1.3.6.1.4.1.3181.10.3.24.10.1.2,MS-SWITCH30-MIB::syslogDestAlias,OCTET,read-write,,current,,This entry contains an individual 
.1.3.6.1.4.1.3181.10.3.24.10.1.3,MS-SWITCH30-MIB::syslogDestEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes the syslog 
.1.3.6.1.4.1.3181.10.3.24.10.1.4,MS-SWITCH30-MIB::syslogDestIpv4Address,IpAddress,read-write,,current,,This entry describes the syslog 
.1.3.6.1.4.1.3181.10.3.24.10.1.5,MS-SWITCH30-MIB::syslogDestPort,INTEGER,read-write,,current,,This is the syslog destination's 
.1.3.6.1.4.1.3181.10.3.24.10.1.6,MS-SWITCH30-MIB::syslogDestFacility,INTEGER,read-write,,current,kernelMessage(0):userLevelMessage(1):mailSystem(2):systemDaemon(3):securityMessage1(4):syslogdMessage(5):linePrinterSubsystem(6):networkNewsSubsystem(7):uucpSubsystem(8):clockDeamon1(9):securityMessage2(10):ftpDeamon(11):ntpSubsystem(12):logAudit(13):logAlert(14):clockDeamon2(15):localUse0(16):localUse1(17):localUse2(18):localUse3(19):localUse4(20):localUse5(21):localUse6(22):localUse7(23),This entry describes the syslog 
.1.3.6.1.4.1.3181.10.3.24.10.1.7,MS-SWITCH30-MIB::syslogDestEventFilter,BITS,read-write,,current,reset(0):linkchange(1):configchange(2):login(3):firmwareupdate(4):powerredundancy(5):portauth(6):temperature(7):ring(8):sfp(9):poe(10):rtc(11):vct(12):debug(29):statusreport(30):test(31),Flags to filter syslog events:
.1.3.6.1.4.1.3181.10.3.25,MS-SWITCH30-MIB::radius,,,,,,
.1.3.6.1.4.1.3181.10.3.25.1,MS-SWITCH30-MIB::radiusSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.25.2,MS-SWITCH30-MIB::radiusAccessEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.25.3,MS-SWITCH30-MIB::radiusAccountEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.25.4,MS-SWITCH30-MIB::radiusServerCount,INTEGER,read-only,,current,,The number of supported radius servers
.1.3.6.1.4.1.3181.10.3.25.5,MS-SWITCH30-MIB::radiusMacAuthPassword,OCTET,read-write,,current,,Password used for MAC Authentication via 
.1.3.6.1.4.1.3181.10.3.25.6,MS-SWITCH30-MIB::radiusUseMacAsPassword,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.25.7,MS-SWITCH30-MIB::radiusMacSeparator,OCTET,read-write,,current,,Character to separate the bytes of the 
.1.3.6.1.4.1.3181.10.3.25.8,MS-SWITCH30-MIB::radiusTimeout,INTEGER,read-write,,current,,This entry contains the time in seconds 
.1.3.6.1.4.1.3181.10.3.25.9,MS-SWITCH30-MIB::radiusMacLettercase,INTEGER,read-write,,current,lower(1):upper(2),This entry contains the information about 
.1.3.6.1.4.1.3181.10.3.25.10,MS-SWITCH30-MIB::radiusServerTable,,not-accessible,,current,,This table contains the configuration 
.1.3.6.1.4.1.3181.10.3.25.10.1,MS-SWITCH30-MIB::radiusServerTableEntry,,not-accessible,radiusServerId,current,,Entry in the radius server table.
.1.3.6.1.4.1.3181.10.3.25.10.1.1,MS-SWITCH30-MIB::radiusServerId,INTEGER,read-only,,current,,This entry contains the radius server id.
.1.3.6.1.4.1.3181.10.3.25.10.1.2,MS-SWITCH30-MIB::radiusServerAlias,OCTET,read-write,,current,,This entry contains an individual name for 
.1.3.6.1.4.1.3181.10.3.25.10.1.3,MS-SWITCH30-MIB::radiusServerEnableAccess,INTEGER,service,,current,enabled(1):disabled(2):unsupported(255),This entry describes the radius
.1.3.6.1.4.1.3181.10.3.25.10.1.4,MS-SWITCH30-MIB::radiusServerEnableAccount,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry describes the radius
.1.3.6.1.4.1.3181.10.3.25.10.1.5,MS-SWITCH30-MIB::radiusServerIpv4Address,IpAddress,read-write,,current,,This entry describes the radius
.1.3.6.1.4.1.3181.10.3.25.10.1.6,MS-SWITCH30-MIB::radiusServerAccessPort,INTEGER,read-write,,current,,This is the radius server's UDP port
.1.3.6.1.4.1.3181.10.3.25.10.1.7,MS-SWITCH30-MIB::radiusServerAccountPort,INTEGER,read-write,,current,,This is the radius server's UDP port
.1.3.6.1.4.1.3181.10.3.25.10.1.8,MS-SWITCH30-MIB::radiusServerSecret,OCTET,read-write,,current,,This is the radius server's secret string.
.1.3.6.1.4.1.3181.10.3.30,MS-SWITCH30-MIB::supply,,,,,,
.1.3.6.1.4.1.3181.10.3.30.1,MS-SWITCH30-MIB::supplyCount,INTEGER,read-only,,current,,The number of supported power supplies.
.1.3.6.1.4.1.3181.10.3.30.10,MS-SWITCH30-MIB::supplyTable,,not-accessible,,current,,This table contains power supply 
.1.3.6.1.4.1.3181.10.3.30.10.1,MS-SWITCH30-MIB::supplyTableEntry,,not-accessible,supplyId,current,,Entry in the supply table.
.1.3.6.1.4.1.3181.10.3.30.10.1.1,MS-SWITCH30-MIB::supplyId,INTEGER,read-only,,current,,This entry describes the power supply id.
.1.3.6.1.4.1.3181.10.3.30.10.1.2,MS-SWITCH30-MIB::supplyUsed,INTEGER,read-write,,current,used(1):unused(2):unsupported(255),If several supplies are possible but not 
.1.3.6.1.4.1.3181.10.3.30.10.1.3,MS-SWITCH30-MIB::supplyStatus,INTEGER,read-only,,current,valid(1):invalid(2):undefined(254):unsupported(255),This entry contains the information if the 
.1.3.6.1.4.1.3181.10.3.31,MS-SWITCH30-MIB::poepse,,,,,,
.1.3.6.1.4.1.3181.10.3.31.1,MS-SWITCH30-MIB::poepseSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if this
.1.3.6.1.4.1.3181.10.3.31.2,MS-SWITCH30-MIB::poepseEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.31.3,MS-SWITCH30-MIB::poepseTotalInputPower,INTEGER,read-write,,current,,This entry contains the input power (in W) 
.1.3.6.1.4.1.3181.10.3.31.4,MS-SWITCH30-MIB::poepseMaxInputPower,INTEGER,read-only,,current,,This entry contains maximum available input 
.1.3.6.1.4.1.3181.10.3.31.5,MS-SWITCH30-MIB::poepseDeviceSupplyPower,INTEGER,read-only,,current,,This entry contains the power (in W) the 
.1.3.6.1.4.1.3181.10.3.31.6,MS-SWITCH30-MIB::pseAvailablePower,INTEGER,read-only,,current,,This entry contains the available poe 
.1.3.6.1.4.1.3181.10.3.31.7,MS-SWITCH30-MIB::poepseExtendedVoltage,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.31.10,MS-SWITCH30-MIB::poepsePortTable,,not-accessible,,current,,This table contains the pse port 
.1.3.6.1.4.1.3181.10.3.31.10.1,MS-SWITCH30-MIB::poepsePortTableEntry,,not-accessible,poepsePortId,current,,Entry in the supply table.
.1.3.6.1.4.1.3181.10.3.31.10.1.1,MS-SWITCH30-MIB::poepsePortId,INTEGER,read-only,,current,,This entry describes the device's pse 
.1.3.6.1.4.1.3181.10.3.31.10.1.2,MS-SWITCH30-MIB::poepsePortMode,INTEGER,read-write,,current,poe8023af(1):poeForced(2):poeDisabled(3):undefined(254):unsupported(255),This entry describes the device's pse 
.1.3.6.1.4.1.3181.10.3.31.10.1.3,MS-SWITCH30-MIB::poepsePortStatus,INTEGER,read-only,,current,off(0):discovering(1):powered(2):fault(3):disabled(4):overcurrent(5):undefined(254):unsupported(255),This entry describes the device's pse 
.1.3.6.1.4.1.3181.10.3.31.10.1.4,MS-SWITCH30-MIB::poepsePortMaxPower,INTEGER,read-write,,current,,This entry describes the permitted 
.1.3.6.1.4.1.3181.10.3.31.10.1.5,MS-SWITCH30-MIB::poepsePortMeasuredPower,INTEGER,read-only,,current,,This entry describes the measured 
.1.3.6.1.4.1.3181.10.3.31.10.1.6,MS-SWITCH30-MIB::poepsePortMaxClass,INTEGER,read-write,,current,class0(0):class1(1):class2(2):class3(3):class4(4):undefined(254):unsupported(255),This entry describes the maximnum 
.1.3.6.1.4.1.3181.10.3.31.10.1.7,MS-SWITCH30-MIB::poepsePortDetectedClass,INTEGER,read-only,,current,class0(0):class1(1):class2(2):class3(3):class4(4):undefined(254):unsupported(255),This entry describes the detected 
.1.3.6.1.4.1.3181.10.3.31.10.1.8,MS-SWITCH30-MIB::poepsePortMeasuredVoltage,INTEGER,read-only,,current,,This entry describes the measured 
.1.3.6.1.4.1.3181.10.3.32,MS-SWITCH30-MIB::poepd,,,,,,
.1.3.6.1.4.1.3181.10.3.32.1,MS-SWITCH30-MIB::poepdSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.33,MS-SWITCH30-MIB::hardwarecode,,,,,,
.1.3.6.1.4.1.3181.10.3.33.1,MS-SWITCH30-MIB::hardwarecodeSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if a 
.1.3.6.1.4.1.3181.10.3.33.2,MS-SWITCH30-MIB::hardwarecodeNumber,INTEGER,read-only,,current,,This entry describes the value of the 
.1.3.6.1.4.1.3181.10.3.34,MS-SWITCH30-MIB::spanningtree,,,,,,
.1.3.6.1.4.1.3181.10.3.34.1,MS-SWITCH30-MIB::stpSupport,INTEGER,read-only,,current,supported(1):unsupported(255),This entry contains the information if the
.1.3.6.1.4.1.3181.10.3.34.2,MS-SWITCH30-MIB::stpEnable,INTEGER,read-write,,current,enabled(1):disabled(2):unsupported(255),This entry contains the information if 
.1.3.6.1.4.1.3181.10.3.100,MS-SWITCH30-MIB::msSwitchNotifications,,,,,,
.1.3.6.1.4.1.3181.10.3.100.1,MS-SWITCH30-MIB::linkChangeNotification,,,,,,Trap indicating that a port's link status 
.1.3.6.1.4.1.3181.10.3.100.2,MS-SWITCH30-MIB::factoryResetNotification,,,,,,Trap indicating a factory reset initiated 
.1.3.6.1.4.1.3181.10.3.100.3,MS-SWITCH30-MIB::temperatureLevelChangeNotification,,,,,,Trap indicating the device temperature level 
.1.3.6.1.4.1.3181.10.3.100.4,MS-SWITCH30-MIB::errorcountNotification,,,,,,Trap indicating errors received at a port.
.1.3.6.1.4.1.3181.10.3.100.5,MS-SWITCH30-MIB::underOverVoltageNotification,,,,,,Trap indicating the PoLAN port voltage is 
.1.3.6.1.4.1.3181.10.3.100.6,MS-SWITCH30-MIB::temperatureShutdownNotification,,,,,,Trap indicating that the device temperature 
.1.3.6.1.4.1.3181.10.3.100.7,MS-SWITCH30-MIB::portPoELimitExceededNotification,,,,,,Trap indicating that port power has been 
.1.3.6.1.4.1.3181.10.3.100.8,MS-SWITCH30-MIB::powerSupplyStatusChangeNotification,,,,,,Trap indicating that main or redundant power 
.1.3.6.1.4.1.3181.10.3.100.9,MS-SWITCH30-MIB::sfpPlugChangeNotification,,,,,,Trap indicating that a sfp module has been 
.1.3.6.1.4.1.3181.10.3.100.10,MS-SWITCH30-MIB::loginFailureNotification,,,,,,Trap indicating a login attempt 
.1.3.6.1.4.1.3181.10.3.100.11,MS-SWITCH30-MIB::ringBrokenNotification,,,,,,Trap indicating a link down detect
.1.3.6.1.4.1.3181.10.3.100.12,MS-SWITCH30-MIB::ringAlarmNotification,,,,,,Trap indicating a Ring alert reception.
.1.3.6.1.4.1.3181.10.3.100.13,MS-SWITCH30-MIB::snmpv3AuthenticationPwFailNotification,,,,,,Notification indicating an Authentication
.1.3.6.1.4.1.3181.10.3.100.14,MS-SWITCH30-MIB::snmpv3PrivacyPwFailNotification,,,,,,Notification indicating a Privacy
.1.3.6.1.4.1.3181.10.3.100.15,MS-SWITCH30-MIB::snmpv3AccessPermissionNotification,,,,,,Notification indicating a write attempt
.1.3.6.1.4.1.3181.10.3.100.16,MS-SWITCH30-MIB::snmpv3SeclevelFailNotification,,,,,,Notification indicating a user 
.1.3.6.1.4.1.3181.10.6,MICROSENS-G6-MIB::g6,,,,,,
.1.3.6.1.4.1.3181.10.6.1,G6-FACTORY-MIB::device,,,,,,Microsens private MIB for Generation 6 Ethernet Switches
.1.3.6.1.4.1.3181.10.6.1.1,MICROSENS-G6-NOTIFICATION-MIB::g6Trap,,,,,,
.1.3.6.1.4.1.3181.10.6.1.1.3,MICROSENS-G6-NOTIFICATION-MIB::g6TrapDebug,,,,,,Internal Debug Messages.
.1.3.6.1.4.1.3181.10.6.1.1.4,MICROSENS-G6-NOTIFICATION-MIB::g6TrapAliveTest,,,,,,Can be used to check out event and notification system with no effect to the system operation.
.1.3.6.1.4.1.3181.10.6.1.1.5,MICROSENS-G6-NOTIFICATION-MIB::g6TrapFirmwareUpdateOk,,,,,,Firmware installation has successfully taken place.
.1.3.6.1.4.1.3181.10.6.1.1.6,MICROSENS-G6-NOTIFICATION-MIB::g6TrapFirmwareUpdateFail,,,,,,Firmware installation has FAILED.
.1.3.6.1.4.1.3181.10.6.1.1.7,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLicenseViolation,,,,,,Firmware is used for which no license has been granted. Please contact sales representant.
.1.3.6.1.4.1.3181.10.6.1.1.8,MICROSENS-G6-NOTIFICATION-MIB::g6TrapColdStart,,,,,,The device has booted. Data transmission was interrupted.
.1.3.6.1.4.1.3181.10.6.1.1.9,MICROSENS-G6-NOTIFICATION-MIB::g6TrapWarmStart,,,,,,The device has (partially) booted without interupting data transmission services.
.1.3.6.1.4.1.3181.10.6.1.1.10,MICROSENS-G6-NOTIFICATION-MIB::g6TrapFactoryReset,,,,,,Configuration factory reset is executed via local push button on the device.
.1.3.6.1.4.1.3181.10.6.1.1.11,MICROSENS-G6-NOTIFICATION-MIB::g6TrapConfigurationLoaded,,,,,,All or a specific configuration file(s) has been restored and activated.
.1.3.6.1.4.1.3181.10.6.1.1.12,MICROSENS-G6-NOTIFICATION-MIB::g6TrapChangeConfig,,,,,,A configuration parameter has been modified and activated.
.1.3.6.1.4.1.3181.10.6.1.1.13,MICROSENS-G6-NOTIFICATION-MIB::g6TrapChangeOfflineConfig,,,,,,An offline configuration parameter has been modified. The running system is not affected.
.1.3.6.1.4.1.3181.10.6.1.1.14,MICROSENS-G6-NOTIFICATION-MIB::g6TrapActionResponse,,,,,,Not a customer event. Contains the reponse string to an action command.
.1.3.6.1.4.1.3181.10.6.1.1.15,MICROSENS-G6-NOTIFICATION-MIB::g6TrapCommitConfig,,,,,,Not a customer event. Recent configuration changes should now be stored and activated.
.1.3.6.1.4.1.3181.10.6.1.1.16,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPowerSupplyOk,,,,,,Power supply has been restored. Applies to units with redundant supplies only.
.1.3.6.1.4.1.3181.10.6.1.1.17,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPowerSupplyFail,,,,,,Power supply has FAILED. Applies to units with redundant supplies only.
.1.3.6.1.4.1.3181.10.6.1.1.18,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLogin,,,,,,An operator has logged onto the system.
.1.3.6.1.4.1.3181.10.6.1.1.19,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLogout,,,,,,An operator has logged off from the system.
.1.3.6.1.4.1.3181.10.6.1.1.20,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLoginAttempt,,,,,,An operator login has failed due to invalid login or password.
.1.3.6.1.4.1.3181.10.6.1.1.21,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLinkUp,,,,,,A port has gone online and is ready to transport data.
.1.3.6.1.4.1.3181.10.6.1.1.22,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLinkDown,,,,,,A port has gone down. Data transport on this port is no longer possible.
.1.3.6.1.4.1.3181.10.6.1.1.23,MICROSENS-G6-NOTIFICATION-MIB::g6TrapRingNormal,,,,,,A ring is back to normal operation. Protection is available.
.1.3.6.1.4.1.3181.10.6.1.1.24,MICROSENS-G6-NOTIFICATION-MIB::g6TrapRingBackup,,,,,,A ring has switched to the redundant backup path.
.1.3.6.1.4.1.3181.10.6.1.1.25,MICROSENS-G6-NOTIFICATION-MIB::g6TrapRingFailure,,,,,,A ring has FAILED. Normal and backup path are unavailable.
.1.3.6.1.4.1.3181.10.6.1.1.26,MICROSENS-G6-NOTIFICATION-MIB::g6TrapCouplingState,,,,,,Coupling controller state change.
.1.3.6.1.4.1.3181.10.6.1.1.27,MICROSENS-G6-NOTIFICATION-MIB::g6TrapTemperatureOk,,,,,,Operating temperature is within acceptable limits.
.1.3.6.1.4.1.3181.10.6.1.1.28,MICROSENS-G6-NOTIFICATION-MIB::g6TrapTemperatureWarning,,,,,,Operating temperature is low or high. Performance my be degraded. Do not run under this condition for prolonged time.
.1.3.6.1.4.1.3181.10.6.1.1.29,MICROSENS-G6-NOTIFICATION-MIB::g6TrapTemperatureFailure,,,,,,Operating temperature is too low or too high. The unit may switch itself off to protect itself anytime soon.
.1.3.6.1.4.1.3181.10.6.1.1.30,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMacAccepted,,,,,,A MAC address has been authorized.
.1.3.6.1.4.1.3181.10.6.1.1.31,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMacAuthError,,,,,,MAC authorization error.
.1.3.6.1.4.1.3181.10.6.1.1.32,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMacBlocked,,,,,,A MAC address has been blocked.
.1.3.6.1.4.1.3181.10.6.1.1.33,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMacBlockedVlan,,,,,,A MAC address has been blocked. Assigned to unauthorized VLAN.
.1.3.6.1.4.1.3181.10.6.1.1.34,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMacDisconnected,,,,,,A MAC address has been disconnected.
.1.3.6.1.4.1.3181.10.6.1.1.35,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSfpInserted,,,,,,An SFP (pluggable optical or electrical port module) has been inserted.
.1.3.6.1.4.1.3181.10.6.1.1.36,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSfpRemoved,,,,,,An SFP (pluggable optical or electrical port module) has been removed from the device.
.1.3.6.1.4.1.3181.10.6.1.1.37,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSfpSignalPresent,,,,,,An SFP (pluggable optical or electrical port module) has detected an optical receive signal.
.1.3.6.1.4.1.3181.10.6.1.1.38,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSfpSignalLoss,,,,,,An SFP (pluggable optical or electrical port module) has lost its receive signal.
.1.3.6.1.4.1.3181.10.6.1.1.39,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSfpSignalChange,,,,,,An SFP (pluggable optical or electrical port module) has detected a change in the optical input power level.
.1.3.6.1.4.1.3181.10.6.1.1.40,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSfpMismatch,,,,,,An SFP (pluggable optical or electrical port module) has been inserted which does not match the required feature(s).
.1.3.6.1.4.1.3181.10.6.1.1.41,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPoeConnect,,,,,,A POE (Power over Ethernet) device is connected an powered.
.1.3.6.1.4.1.3181.10.6.1.1.42,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPoeVoltage,,,,,,The POE (Power over Ethernet) operating voltage is too low.
.1.3.6.1.4.1.3181.10.6.1.1.43,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPoeError,,,,,,A POE (Power over Ethernet) error has occurred.
.1.3.6.1.4.1.3181.10.6.1.1.44,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPoeClassmismatch,,,,,,A POE (Power over Ethernet) powered device requires a power level not enabled or available at this port.
.1.3.6.1.4.1.3181.10.6.1.1.45,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPoeDisconnect,,,,,,A POE (Power over Ethernet) device has been disconnected.
.1.3.6.1.4.1.3181.10.6.1.1.46,MICROSENS-G6-NOTIFICATION-MIB::g6TrapNtpFail,,,,,,The NTP client (Network Time Protocol) has a failure condition.
.1.3.6.1.4.1.3181.10.6.1.1.47,MICROSENS-G6-NOTIFICATION-MIB::g6TrapHardwareError,,,,,,A hardware error has been detected.
.1.3.6.1.4.1.3181.10.6.1.1.48,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSoftwareError,,,,,,A software error has occured.
.1.3.6.1.4.1.3181.10.6.1.1.49,MICROSENS-G6-NOTIFICATION-MIB::g6TrapButtonPressed,,,,,,System button pressed.
.1.3.6.1.4.1.3181.10.6.1.1.67,MICROSENS-G6-NOTIFICATION-MIB::g6TrapInputSignalNormal,,,,,,An external input signal has been deactivated and returned to normal state.
.1.3.6.1.4.1.3181.10.6.1.1.68,MICROSENS-G6-NOTIFICATION-MIB::g6TrapInputSignalActivated,,,,,,An external input signal has been activated.
.1.3.6.1.4.1.3181.10.6.1.1.69,MICROSENS-G6-NOTIFICATION-MIB::g6TrapOutputRelayNormal,,,,,,A relay output signal has been deactivated and returned to normal state.
.1.3.6.1.4.1.3181.10.6.1.1.70,MICROSENS-G6-NOTIFICATION-MIB::g6TrapOutputRelayActivated,,,,,,An external input signal has been deactivated and returned to normal state.
.1.3.6.1.4.1.3181.10.6.1.1.71,MICROSENS-G6-NOTIFICATION-MIB::g6TrapPacketIntercepted,,,,,,Special filter has intercepted a data packet.
.1.3.6.1.4.1.3181.10.6.1.1.72,MICROSENS-G6-NOTIFICATION-MIB::g6TrapScriptUnitPositive,,,,,,A positive unit related user defined event created by script or app.
.1.3.6.1.4.1.3181.10.6.1.1.73,MICROSENS-G6-NOTIFICATION-MIB::g6TrapScriptUnitNegative,,,,,,A negative unit related user defined event created by script or app.
.1.3.6.1.4.1.3181.10.6.1.1.74,MICROSENS-G6-NOTIFICATION-MIB::g6TrapScriptPortPositive,,,,,,A positive port related user defined event created by script or app.
.1.3.6.1.4.1.3181.10.6.1.1.75,MICROSENS-G6-NOTIFICATION-MIB::g6TrapScriptPortNegative,,,,,,A negative port related user defined event created by script or app.
.1.3.6.1.4.1.3181.10.6.1.1.76,MICROSENS-G6-NOTIFICATION-MIB::g6TrapScriptExecuted,,,,,,A user defined script execution started.
.1.3.6.1.4.1.3181.10.6.1.1.77,MICROSENS-G6-NOTIFICATION-MIB::g6TrapScriptError,,,,,,Script execution error of a user defined script.
.1.3.6.1.4.1.3181.10.6.1.1.78,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLoopRemoved,,,,,,Cable loop removed. Port unblocked.
.1.3.6.1.4.1.3181.10.6.1.1.79,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLoopDetected,,,,,,Cable loop detected. Port blocked.
.1.3.6.1.4.1.3181.10.6.1.1.80,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLacpConnect,,,,,,Aggregated link established.
.1.3.6.1.4.1.3181.10.6.1.1.81,MICROSENS-G6-NOTIFICATION-MIB::g6TrapLacpDisconnect,,,,,,Aggregated link down.
.1.3.6.1.4.1.3181.10.6.1.1.82,MICROSENS-G6-NOTIFICATION-MIB::g6TrapAppInstalled,,,,,,App installed ok.
.1.3.6.1.4.1.3181.10.6.1.1.83,MICROSENS-G6-NOTIFICATION-MIB::g6TrapAppInstallationFail,,,,,,App installation has failed.
.1.3.6.1.4.1.3181.10.6.1.1.84,MICROSENS-G6-NOTIFICATION-MIB::g6TrapAppDeinstalled,,,,,,App deinstalled.
.1.3.6.1.4.1.3181.10.6.1.1.85,MICROSENS-G6-NOTIFICATION-MIB::g6TrapCableChangeDetected,,,,,,Change in cable termination detected.
.1.3.6.1.4.1.3181.10.6.1.1.86,MICROSENS-G6-NOTIFICATION-MIB::g6TrapImplausibleConfig,,,,,,Implausible configuration detected
.1.3.6.1.4.1.3181.10.6.1.1.87,MICROSENS-G6-NOTIFICATION-MIB::g6TrapNetworkAttack,,,,,,Potential network attack detected
.1.3.6.1.4.1.3181.10.6.1.1.88,MICROSENS-G6-NOTIFICATION-MIB::g6TrapModuleInserted,,,,,,A hardware module has been inserted into the system.
.1.3.6.1.4.1.3181.10.6.1.1.89,MICROSENS-G6-NOTIFICATION-MIB::g6TrapModuleRemoved,,,,,,A hardware module has been removed from the system.
.1.3.6.1.4.1.3181.10.6.1.1.90,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMsp1000UnitPositive,,,,,,A positive MSP1000 unit related event has occured.
.1.3.6.1.4.1.3181.10.6.1.1.91,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMsp1000UnitNegative,,,,,,A negative MSP1000 unit related event has occured.
.1.3.6.1.4.1.3181.10.6.1.1.92,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMsp1000PortPositive,,,,,,A positive MSP1000 port related event has occured.
.1.3.6.1.4.1.3181.10.6.1.1.93,MICROSENS-G6-NOTIFICATION-MIB::g6TrapMsp1000PortNegative,,,,,,A negative MSP1000 port related event has occured.
.1.3.6.1.4.1.3181.10.6.1.1.94,MICROSENS-G6-NOTIFICATION-MIB::g6TrapBackupTerminated,,,,,,Backup path not required.
.1.3.6.1.4.1.3181.10.6.1.1.95,MICROSENS-G6-NOTIFICATION-MIB::g6TrapBackupEngaged,,,,,,Backup path has been engaged.
.1.3.6.1.4.1.3181.10.6.1.1.96,MICROSENS-G6-NOTIFICATION-MIB::g6TrapBackupFailure,,,,,,Backup path could not be completed.
.1.3.6.1.4.1.3181.10.6.1.1.97,MICROSENS-G6-NOTIFICATION-MIB::g6TrapFanOk,,,,,,Cooling fan operating normally.
.1.3.6.1.4.1.3181.10.6.1.1.98,MICROSENS-G6-NOTIFICATION-MIB::g6TrapFanDegraded,,,,,,Cooling fan degraded. Replace fan soon.
.1.3.6.1.4.1.3181.10.6.1.1.99,MICROSENS-G6-NOTIFICATION-MIB::g6TrapFanFailure,,,,,,Cooling fan failed. Replace fan immediately
.1.3.6.1.4.1.3181.10.6.1.1.100,MICROSENS-G6-NOTIFICATION-MIB::g6TrapIncomingAlert,,,,,,Externally received HTTP_GET_REQUEST or received SNMP TRAP.
.1.3.6.1.4.1.3181.10.6.1.1.101,MICROSENS-G6-NOTIFICATION-MIB::g6TrapCableTerminationEstablished,,,,,,Cable termination established. Possible reason: A terminated remote device was connected to the cable.
.1.3.6.1.4.1.3181.10.6.1.1.102,MICROSENS-G6-NOTIFICATION-MIB::g6TrapCableTerminationLost,,,,,,Cable termination lost. Possible reason: A terminated remote device was disconnected from the cable or the cable was locally unplugged.
.1.3.6.1.4.1.3181.10.6.1.1.103,MICROSENS-G6-NOTIFICATION-MIB::g6TrapTerminalServerConnected,,,,,,Terminal server connected foreign host to local serial port.
.1.3.6.1.4.1.3181.10.6.1.1.104,MICROSENS-G6-NOTIFICATION-MIB::g6TrapTerminalServerDisconnected,,,,,,Terminal server disconnected foreign host from local serial port.
.1.3.6.1.4.1.3181.10.6.1.1.105,MICROSENS-G6-NOTIFICATION-MIB::g6TrapTerminalServerFail,,,,,,Terminal server failed in connecting foreign host to local serial port.
.1.3.6.1.4.1.3181.10.6.1.1.108,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSensorGroupChange,,,,,,Sensor group values have changed.
.1.3.6.1.4.1.3181.10.6.1.1.110,MICROSENS-G6-NOTIFICATION-MIB::g6TrapActorGroupChangeRequest,,,,,,Actor group is requested to change to a new value.
.1.3.6.1.4.1.3181.10.6.1.1.111,MICROSENS-G6-NOTIFICATION-MIB::g6TrapRegisterSmartDevice,,,,,,A new smart device is registered.
.1.3.6.1.4.1.3181.10.6.1.1.112,MICROSENS-G6-NOTIFICATION-MIB::g6TrapUpdateSmartDevice,,,,,,A smart device has changed its status.
.1.3.6.1.4.1.3181.10.6.1.1.115,MICROSENS-G6-NOTIFICATION-MIB::g6TrapRegisterSmartAttribute,,,,,,A new smart attribute is registered.
.1.3.6.1.4.1.3181.10.6.1.1.117,MICROSENS-G6-NOTIFICATION-MIB::g6TrapUnregisterSmartDevice,,,,,,A smart device is unregistered.
.1.3.6.1.4.1.3181.10.6.1.1.118,MICROSENS-G6-NOTIFICATION-MIB::g6TrapUnregisterSmartAttribute,,,,,,A smart attribute is unregistered.
.1.3.6.1.4.1.3181.10.6.1.1.119,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSingleActorChange,,,,,,An individual actor is set to a new value.
.1.3.6.1.4.1.3181.10.6.1.1.120,MICROSENS-G6-NOTIFICATION-MIB::g6TrapActorGroupChanged,,,,,,An actor group has changed to a new value.
.1.3.6.1.4.1.3181.10.6.1.1.121,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSmartOfficeInitializing,,,,,,Smart Office is being initialized.
.1.3.6.1.4.1.3181.10.6.1.1.122,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSmartOfficeStarted,,,,,,Smart Office is started and ready.
.1.3.6.1.4.1.3181.10.6.1.1.123,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSmartOfficeStopped,,,,,,Smart Office is being stopped.
.1.3.6.1.4.1.3181.10.6.1.1.124,MICROSENS-G6-NOTIFICATION-MIB::g6TrapSmartOfficeError,,,,,,A Smart Office error has occured.
.1.3.6.1.4.1.3181.10.6.1.1.125,MICROSENS-G6-NOTIFICATION-MIB::g6TrapOtdrMeasurements,,,,,,An OTDR measurement has taken place and detected a change in the optical characteristics of the cable.
.1.3.6.1.4.1.3181.10.6.1.2,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjects,,,,,,
.1.3.6.1.4.1.3181.10.6.1.2.1,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjEventName,OCTET,read-only,,current,,Event name as text string.
.1.3.6.1.4.1.3181.10.6.1.2.2,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjGroupName,INTEGER,read-only,,current,internal(0):debug(2):test(3):reset(4):firmware(5):system(6):config(7):login(8):auth(9):power(10):temperature(11):link(12):sfp(13):poe(14):ring(15):ntp(16):signals(17):script(18):filter(19):lacp(20):app(21):cable(22):security(23):msp1000(24):backup(25):fan(26):messaging(27):terminalserver(28):smartoffice(29),Event group as text string.
.1.3.6.1.4.1.3181.10.6.1.2.3,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjRelevance,INTEGER,read-only,,current,positive(0):negative(1):information(2),pos neg info
.1.3.6.1.4.1.3181.10.6.1.2.4,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjSeverity,INTEGER,read-only,,current,disabled(0):debug(1):info(2):notice(3):warning(4):error(5):critical(6):alert(7):emergency(8),Severity level of this event.
.1.3.6.1.4.1.3181.10.6.1.2.5,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjSource,INTEGER,read-only,,current,unit(0):port(1),Unit or port related event.
.1.3.6.1.4.1.3181.10.6.1.2.6,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjSysName,OCTET,read-only,,current,,User defined system name of the device originating this event.
.1.3.6.1.4.1.3181.10.6.1.2.7,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjPortId,Integer32,read-only,,current,,Port identification in snmp compliant integer format. Value is calculated as (slot * 100) + port.
.1.3.6.1.4.1.3181.10.6.1.2.8,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjPortString,OCTET,read-only,,current,,Port identification in slot/port notation.
.1.3.6.1.4.1.3181.10.6.1.2.9,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjPortAlias,OCTET,read-only,,current,,Port identification using a possible user assigned alias or nickname.
.1.3.6.1.4.1.3181.10.6.1.2.10,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjDescription,OCTET,read-only,,current,,Detailed human readable full description of the event.
.1.3.6.1.4.1.3181.10.6.1.2.11,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjMac,OCTET,read-only,,current,,MAC address related with authentication trap.
.1.3.6.1.4.1.3181.10.6.1.2.12,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjVlanId,Integer32,read-only,,current,,Associated VLAN id.
.1.3.6.1.4.1.3181.10.6.1.2.13,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjOfficeGroupName,OCTET,read-only,,current,,SmartOffice actor or sensor group name.
.1.3.6.1.4.1.3181.10.6.1.2.14,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjAvgValue,OCTET,read-only,,current,,SmartOffice group data value. Contains the average value of all elements in the same group
.1.3.6.1.4.1.3181.10.6.1.2.15,MICROSENS-G6-NOTIFICATION-MIB::g6TrapObjTotalValue,OCTET,read-only,,current,,SmartOffice group data value. Contains the total value of all elements in the same group
.1.3.6.1.4.1.3181.10.6.1.22,G6-IP-MIB::ip,,,,,,
.1.3.6.1.4.1.3181.10.6.1.22.1,G6-IP-MIB::ipPingTest,OCTET,read-write,,current,,Supply an IP address to ping for reachability testing.
.1.3.6.1.4.1.3181.10.6.1.22.2,G6-IP-MIB::ipTraceRoute,OCTET,read-write,,current,,Supply an IP address to trace route testing.
.1.3.6.1.4.1.3181.10.6.1.22.3,G6-IP-MIB::ipDnsLookup,OCTET,read-write,,current,,Supply a hostname or web address to query for its ip address.
.1.3.6.1.4.1.3181.10.6.1.22.4,G6-IP-MIB::ipArpTable,OCTET,read-write,,current,,Displays the content of the ARP table used for management access.
.1.3.6.1.4.1.3181.10.6.1.22.5,G6-IP-MIB::ipHostname,OCTET,read-write,,current,,Defines the local hostname.
.1.3.6.1.4.1.3181.10.6.1.22.6,G6-IP-MIB::ipLocalMtu,Integer32,read-write,,current,,Defines MTU value for locally generated data.
.1.3.6.1.4.1.3181.10.6.1.22.7,G6-IP-MIB::v4ConfigTable,,not-accessible,,current,,This section configures IP version 4 fixed IP settings or enables use of DHCP alternatively.
.1.3.6.1.4.1.3181.10.6.1.22.7.1,G6-IP-MIB::v4ConfigEntry,,not-accessible,v4ConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.22.7.1.1,G6-IP-MIB::v4ConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.22.7.1.2,G6-IP-MIB::v4ConfigDhcpMode,INTEGER,read-write,,current,disabled(0):useDhcp(1):dhcpWithScript(2),Enable DHCP to automatically retrieve an IP address and subnet mask. Also DHCP may be used to supply a CLI script file reference to be used on assignment.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.3,G6-IP-MIB::v4ConfigStaticDeviceIp,OCTET,read-write,,current,,Static device IP address. When DHCP is enabled, DHCP has preference over this setting.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.4,G6-IP-MIB::v4ConfigStaticSubnetMask,OCTET,read-write,,current,,Static subnet mask. When DHCP is enabled, DHCP has preference over this setting.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.5,G6-IP-MIB::v4ConfigStaticGateway,OCTET,read-write,,current,,Static default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.6,G6-IP-MIB::v4ConfigStaticDnsServer,OCTET,read-write,,current,,Static domain name server IP address. When DHCP is enabled, DHCP has preference over this setting.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.7,G6-IP-MIB::v4ConfigSecondaryDeviceIp,OCTET,read-write,,current,,Alternative IP address for management access. Not required in most installations.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.8,G6-IP-MIB::v4ConfigSecondarySubnetMask,OCTET,read-write,,current,,This subnet mask applies to secondary ip address.
.1.3.6.1.4.1.3181.10.6.1.22.7.1.9,G6-IP-MIB::v4ConfigDefaultAddressSelection,INTEGER,read-write,,current,primary(0):secondary(1),This parameter defines which own ip address is used for outgoing packets generated by the device. This only applies when a secondary_device_ip is configured.
.1.3.6.1.4.1.3181.10.6.1.22.8,G6-IP-MIB::v6ConfigTable,,not-accessible,,current,,This section configures IP version 6 fixed IP settings or enables use of automatic configuration alternatively.
.1.3.6.1.4.1.3181.10.6.1.22.8.1,G6-IP-MIB::v6ConfigEntry,,not-accessible,v6ConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.22.8.1.1,G6-IP-MIB::v6ConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.22.8.1.2,G6-IP-MIB::v6ConfigEnableIpv6,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of IPv6 management access functionality.
.1.3.6.1.4.1.3181.10.6.1.22.8.1.3,G6-IP-MIB::v6ConfigEnableIcmpAutoAddress,INTEGER,read-write,,current,disabled(0):enabled(1),Decides if an ICMP assigned IPv6 address is accepted.
.1.3.6.1.4.1.3181.10.6.1.22.8.1.4,G6-IP-MIB::v6ConfigEnableDhcpAutoAddress,INTEGER,read-write,,current,disabled(0):enabled(1),Decides if an DHCP assigned IPv6 address is accepted.
.1.3.6.1.4.1.3181.10.6.1.22.9,G6-IP-MIB::v6AddressTable,,not-accessible,,current,,Defines as many static IPv6 address entries as desired.
.1.3.6.1.4.1.3181.10.6.1.22.9.1,G6-IP-MIB::v6AddressEntry,,not-accessible,v6AddressIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.22.9.1.1,G6-IP-MIB::v6AddressIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.22.9.1.2,G6-IP-MIB::v6AddressIp,OCTET,read-write,,current,,IPv6 address
.1.3.6.1.4.1.3181.10.6.1.22.100,G6-IP-MIB::v4StatusTable,,not-accessible,,current,,This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
.1.3.6.1.4.1.3181.10.6.1.22.100.1,G6-IP-MIB::v4StatusEntry,,not-accessible,v4StatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.22.100.1.1,G6-IP-MIB::v4StatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.22.100.1.2,G6-IP-MIB::v4StatusDynamicDeviceIp,OCTET,read-only,,current,,Currently used device IP address.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.3,G6-IP-MIB::v4StatusDynamicSubnetMask,OCTET,read-only,,current,,Currently used subnet mask.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.4,G6-IP-MIB::v4StatusDynamicGateway,OCTET,read-only,,current,,Currently used gateway IP address.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.5,G6-IP-MIB::v4StatusDynamicDnsServer1,OCTET,read-only,,current,,Currently used domain name server IP address.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.6,G6-IP-MIB::v4StatusDynamicDnsServer2,OCTET,read-only,,current,,Alternate currently used domain name server IP address.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.7,G6-IP-MIB::v4StatusDynamicDnsServer3,OCTET,read-only,,current,,Alternate currently used domain name server IP address.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.8,G6-IP-MIB::v4StatusDynamicDnsServer4,OCTET,read-only,,current,,Alternate currently used domain name server IP address.
.1.3.6.1.4.1.3181.10.6.1.22.100.1.9,G6-IP-MIB::v4StatusOutgoingDeviceIp,OCTET,read-only,,current,,Reflects the value v4_config.default_address_selection setting.
.1.3.6.1.4.1.3181.10.6.1.22.101,G6-IP-MIB::v6StatusTable,,not-accessible,,current,,This section shows a summary of IPv6 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP or ICMP.
.1.3.6.1.4.1.3181.10.6.1.22.101.1,G6-IP-MIB::v6StatusEntry,,not-accessible,v6StatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.22.101.1.1,G6-IP-MIB::v6StatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.22.101.1.2,G6-IP-MIB::v6StatusIp,OCTET,read-only,,current,,IPv6 address.
.1.3.6.1.4.1.3181.10.6.1.22.101.1.3,G6-IP-MIB::v6StatusScope,INTEGER,read-only,,current,link(0):site(1):global(2):other(3),Indicates the scope this IP is valid.
.1.3.6.1.4.1.3181.10.6.1.22.101.1.4,G6-IP-MIB::v6StatusState,INTEGER,read-only,,current,stateless(0):stateful(1):both(2):other(3),Indicates the state of this IP.
.1.3.6.1.4.1.3181.10.6.1.30,G6-SYSTEM-MIB::system,,,,,,
.1.3.6.1.4.1.3181.10.6.1.30.1,G6-SYSTEM-MIB::systemShowTimeDate,OCTET,read-write,,current,,Show system time and date.
.1.3.6.1.4.1.3181.10.6.1.30.2,G6-SYSTEM-MIB::systemSetTime,OCTET,read-write,,current,,Sets the system clock (time only). Syntax: 12:30:00
.1.3.6.1.4.1.3181.10.6.1.30.3,G6-SYSTEM-MIB::systemSetDate,OCTET,read-write,,current,,Sets the system clock (date only). Syntax: 2012-12-24
.1.3.6.1.4.1.3181.10.6.1.30.4,G6-SYSTEM-MIB::systemShowUtilization,OCTET,read-write,,current,,Show CPU status information
.1.3.6.1.4.1.3181.10.6.1.30.5,G6-SYSTEM-MIB::systemRebootDevice,OCTET,read-write,,current,,This command will restart the device. All communication will be disrupted! Syntax: reboot_device = CONFIRM.
.1.3.6.1.4.1.3181.10.6.1.30.6,G6-SYSTEM-MIB::systemCreateSnapshot,OCTET,read-write,,current,,Creates a snapshot of all relevant configuration and status information packaged as a single tar archieve. This file can be found in service/snapshot.
.1.3.6.1.4.1.3181.10.6.1.30.7,G6-SYSTEM-MIB::systemSendWakeOnLanPacket,OCTET,read-write,,current,,This command will send a magic packet to wake up a selected sleeping device. The device is identified by its MAC address. Syntax: send_wake_on_lan_packet = 00:11:22:44:55:66.
.1.3.6.1.4.1.3181.10.6.1.30.8,G6-SYSTEM-MIB::systemAlternativeMacAddress,OCTET,read-write,,current,,This field is usually empty. This field may be used to override the MAC address fixed in the factory setting. NOTE: This value is only activated after a reset!
.1.3.6.1.4.1.3181.10.6.1.30.9,G6-SYSTEM-MIB::systemBootPreference,INTEGER,read-write,,current,sdCardFirst(0):internalFirst(1):sdCardOnly(2):internalOnly(3),This feature only applies to devices that feature internal memory plus plugged-in SD cards. It defines which software is used after reboot.
.1.3.6.1.4.1.3181.10.6.1.30.10,G6-SYSTEM-MIB::systemInventory,OCTET,read-write,,current,,Inventory string free for customer use. Up to 512 character are accepted. Note this config is linked to the SD card and may change when config or SD card is exchanged. For an inventory information that is fixed to the hardware use Device.Factory.custom_info command.
.1.3.6.1.4.1.3181.10.6.1.30.11,G6-SYSTEM-MIB::systemAutorunCliScript,OCTET,read-write,,current,,Optional cli scripts executed after power sequence is completed. Several scripts may be assigned, with comma or blank separation.
.1.3.6.1.4.1.3181.10.6.1.30.12,G6-SYSTEM-MIB::systemSerialPort,INTEGER,read-write,,current,disabled(0):console(1):appControlled(2):terminalServer(3):smartSensor(4),When set to DISABLED the local serial console port is disabled. Local access via serial cable is blocked. While this enhances local protection it also closes the emergency access should the device become inaccessible over the network due to misconfiguration. Other setting permit use of the serial port as TERMINAL_SERVER to attach a foreign device for management or to SMART_SENSOR to attach a local hardware extension for use with smart office solutions. 
.1.3.6.1.4.1.3181.10.6.1.30.13,G6-SYSTEM-MIB::systemPermitDebugAccess,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled it is possible to log into the system for debug purposes. This includes telnet/ssh, as well as web and file transfer protocols. To protect the system from unauthorized access it is advised to disable this feature unless instructed by authorized service personnel. NOTE: To ensure that any possibly pending debug access is terminated reboot the device after setting this parameter to disabled.
.1.3.6.1.4.1.3181.10.6.1.30.14,G6-SYSTEM-MIB::systemPermitIncomingAlerts,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled it is possible receive alerts via from external devices via SNMP or HTTP(S). This feature may be used in combination with custom scripting to react to external events. To protect the system from unauthorized spam it is advised to disable this feature unless there is an application for it.
.1.3.6.1.4.1.3181.10.6.1.30.15,G6-SYSTEM-MIB::systemCharacterSet,INTEGER,read-write,,current,iso88591(1):iso88595(5),This parameter can be set to support languages with characters not found the normal Western European character set. Be sure to set your CLI terminal to the matching setting.
.1.3.6.1.4.1.3181.10.6.1.30.16,G6-SYSTEM-MIB::systemConfigurationSaveMode,INTEGER,read-write,,current,permanently(0):temporarily(1),In most cases the configuration of the device should be permanently saved and automatically be applied after a power up. In some cases, however, where public acces to the device is granted it can be desireable to only save changes temporarily. In this mode all configuration changes that occured after setting this mode will be saved in RAM only and will be forgotten on the next system reboot. Important: When this parameter changed to PERMANENTLY all outstanding changes are commited to SD card immediately. When this parameter is changed to temporarily, this already is not saved permanently. Use Management.Files.configuration.commit_config to save this setting before proceeding.
.1.3.6.1.4.1.3181.10.6.1.30.17,G6-SYSTEM-MIB::scriptScheduleTable,,not-accessible,,current,,This dynamic table permits the setup of automated script execution based on precise time scheduling definition. Any number of scripts may be executed at any desired interval or at selected dates. Please ensure the time and date are properly set (via NTP) when using this feature.
.1.3.6.1.4.1.3181.10.6.1.30.17.1,G6-SYSTEM-MIB::scriptScheduleEntry,,not-accessible,scriptScheduleIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.30.17.1.1,G6-SYSTEM-MIB::scriptScheduleIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.30.17.1.2,G6-SYSTEM-MIB::scriptScheduleName,OCTET,read-write,,current,,Unique name to reference this entry and to remember whose MAC address is entered.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.3,G6-SYSTEM-MIB::scriptScheduleMode,INTEGER,read-write,,current,disabled(0):enabled(1),When set to disabled this entry is ignored. It is recommended to first set the mode to disabled before the associated time values are modified. When all values are properly set re-enable the entry.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.4,G6-SYSTEM-MIB::scriptScheduleCliScript,OCTET,read-write,,current,,Enter the name of the cli script that should be executed when the defined time occurs. Ensure that the script name selects a valid file. Several scripts may be assigned, with comma or blank separation.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.5,G6-SYSTEM-MIB::scriptScheduleMinutes,OCTET,read-write,,current,,Format: 3,14 select exact minutes hour:03 and hour:14. * is every minute. */5 defines every five minutes.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.6,G6-SYSTEM-MIB::scriptScheduleHours,OCTET,read-write,,current,,Format: 0-23. Range and comma separation is permitted. * is every hour.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.7,G6-SYSTEM-MIB::scriptScheduleDays,OCTET,read-write,,current,,Format: 1-31. Range and comma separation is permitted. * is every day.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.8,G6-SYSTEM-MIB::scriptScheduleMonths,OCTET,read-write,,current,,Format: 1-12 or Jan-Dec. Range and comma separation is permitted. * is every month.
.1.3.6.1.4.1.3181.10.6.1.30.17.1.9,G6-SYSTEM-MIB::scriptScheduleWeekdays,OCTET,read-write,,current,,Format: 0-6 or Sun-Sat. Range and comma separation is permitted. * is every day.
.1.3.6.1.4.1.3181.10.6.1.30.100,G6-SYSTEM-MIB::systemLastBootTime,OCTET,read-only,,current,,The time and date when this device has booted.
.1.3.6.1.4.1.3181.10.6.1.30.101,G6-SYSTEM-MIB::systemUptime,Counter32,read-only,,current,,Uptime since last reboot in seconds.
.1.3.6.1.4.1.3181.10.6.1.30.102,G6-SYSTEM-MIB::systemUsedMacAddress,OCTET,read-only,,current,,Contains the mac address used by this unit. Usually follows to MAC defined in the factory setting, but may be overwritten by the alternative_mac_address.
.1.3.6.1.4.1.3181.10.6.1.30.103,G6-SYSTEM-MIB::systemUsedBootMedia,INTEGER,read-only,,current,sdCard(0):internalMemory(1):nfs(2),
.1.3.6.1.4.1.3181.10.6.1.30.104,G6-SYSTEM-MIB::systemTemperature,Integer32,read-only,,current,,Temperature value in centigrade.
.1.3.6.1.4.1.3181.10.6.1.30.105,G6-SYSTEM-MIB::systemClimateLevel,INTEGER,read-only,,current,unknown(0):criticalLow(1):low(2):normal(3):increased(4):high(5):criticalHigh(6):shutdown(7),Annotated temperature level.
.1.3.6.1.4.1.3181.10.6.1.30.106,G6-SYSTEM-MIB::firmwareTable,,not-accessible,,current,,This section provides details about the running firmware.
.1.3.6.1.4.1.3181.10.6.1.30.106.1,G6-SYSTEM-MIB::firmwareEntry,,not-accessible,firmwareIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.30.106.1.1,G6-SYSTEM-MIB::firmwareIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.30.106.1.2,G6-SYSTEM-MIB::firmwareRunningVersion,OCTET,read-only,,current,,Running firmware version.
.1.3.6.1.4.1.3181.10.6.1.30.106.1.3,G6-SYSTEM-MIB::firmwareBuildDate,OCTET,read-only,,current,,Build date of the running firmware. Format: 2012-01-18 12:00:22.
.1.3.6.1.4.1.3181.10.6.1.30.106.1.4,G6-SYSTEM-MIB::firmwareBuildNumber,Unsigned32,read-only,,current,,Build number of the running firmware retrieved from the repository.
.1.3.6.1.4.1.3181.10.6.1.30.107,G6-SYSTEM-MIB::saveInfoTable,,not-accessible,,current,,This section provided status information about the internal parameter saving process.
.1.3.6.1.4.1.3181.10.6.1.30.107.1,G6-SYSTEM-MIB::saveInfoEntry,,not-accessible,saveInfoIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.30.107.1.1,G6-SYSTEM-MIB::saveInfoIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.30.107.1.2,G6-SYSTEM-MIB::saveInfoLastSavedParameter,OCTET,read-only,,current,,Records the last written parameter.
.1.3.6.1.4.1.3181.10.6.1.30.107.1.3,G6-SYSTEM-MIB::saveInfoSaveMode,INTEGER,read-only,,current,permanently(0):temporarily(1),Reflects Device.system.configuration_save_mode setting.
.1.3.6.1.4.1.3181.10.6.1.30.107.1.4,G6-SYSTEM-MIB::saveInfoWriteStatus,INTEGER,read-only,,current,nothingToSave(0):processing(1):savedToRam(2):savedToSdcard(3),Indicates if last parameter was written to SD card or temporary RAM.
.1.3.6.1.4.1.3181.10.6.1.30.107.1.5,G6-SYSTEM-MIB::saveInfoTimeStamp,Counter32,read-only,,current,,Records the time the write status was last changed.
.1.3.6.1.4.1.3181.10.6.1.31,G6-HARDWARE-MIB::hardware,,,,,,
.1.3.6.1.4.1.3181.10.6.1.31.1,G6-HARDWARE-MIB::hardwareLedTest,OCTET,read-write,,current,,Runs a leds test whereby all LED light up in all possible colors for checking their function. The tests terminates within a few seconds.
.1.3.6.1.4.1.3181.10.6.1.31.2,G6-HARDWARE-MIB::hardwareLedMode,INTEGER,read-write,,current,dynamic(0):static(1):quiet(2):dark(3):lightshow(4),The LED display can be configured to be less intrusive.
.1.3.6.1.4.1.3181.10.6.1.31.3,G6-HARDWARE-MIB::hardwarePowerSupply1Monitored,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled a missing power supply 1 will not turn the associated led red on failure. Do this when single power supply 2 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches.
.1.3.6.1.4.1.3181.10.6.1.31.4,G6-HARDWARE-MIB::hardwarePowerSupply2Monitored,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled a missing power supply 2 will not turn the associated led red on failure. Do this when single power supply 1 operation is used or when the device is powered soley by PoE. This feature only applies to industrial switches.
.1.3.6.1.4.1.3181.10.6.1.31.5,G6-HARDWARE-MIB::hardwareFactoryResetButton,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled the factory button will trigger the factory reset function when pressed for a long time. The IP discover function upon a short button click is not affected. 
.1.3.6.1.4.1.3181.10.6.1.31.6,G6-HARDWARE-MIB::cableTestConfigTable,,not-accessible,,current,,The cable tester allows for detection of copper cable faults and can even detect where the fault is located.
.1.3.6.1.4.1.3181.10.6.1.31.6.1,G6-HARDWARE-MIB::cableTestConfigEntry,,not-accessible,cableTestConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.6.1.1,G6-HARDWARE-MIB::cableTestConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.6.1.2,G6-HARDWARE-MIB::cableTestConfigEnableAutoCableTest,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled a cable test is performed each time the link goes down. The test is only performed for copper ports or dual media ports in copper mode.
.1.3.6.1.4.1.3181.10.6.1.31.6.1.3,G6-HARDWARE-MIB::cableTestConfigEventGeneration,INTEGER,read-write,,current,disabled(0):anyChange(1):connectionsOnly(2),When the cable termination status changes an event can be raised.
.1.3.6.1.4.1.3181.10.6.1.31.6.1.4,G6-HARDWARE-MIB::cableTestConfigReflectionThreshold,Integer32,read-write,,current,,Select a value up to 508 which is used to decide between a connected cable and a remotely disconnected cable. With actively terminated data ports, the detection is difficult and precise setup is required. Please refer to cable_test_status.reflection_value for further details.
.1.3.6.1.4.1.3181.10.6.1.31.6.1.5,G6-HARDWARE-MIB::cableTestConfigReflectionHysteresis,Integer32,read-write,,current,,Choose value to prevent oscillation when reflection value is slightly shifting.
.1.3.6.1.4.1.3181.10.6.1.31.6.1.6,G6-HARDWARE-MIB::cableTestConfigStartTestNow,OCTET,read-write,,current,,May be used to manually start a cable test. ATTENTION: If the port is in link up status it will be forced to link down first. This will disrupt the current data traffic. Therefore, type start_test_now = CONFIRM.
.1.3.6.1.4.1.3181.10.6.1.31.7,G6-HARDWARE-MIB::ioSignalConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.31.7.1,G6-HARDWARE-MIB::ioSignalConfigEntry,,not-accessible,ioSignalConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.7.1.1,G6-HARDWARE-MIB::ioSignalConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.7.1.2,G6-HARDWARE-MIB::ioSignalConfigSignalMode,INTEGER,read-write,,current,static(0):ledBlink(1):relayBlink(2),Permit setting of io signal LEDs and relays to static or blink blink mode for increased visualization.
.1.3.6.1.4.1.3181.10.6.1.31.7.1.3,G6-HARDWARE-MIB::ioSignalConfigInput1Mode,INTEGER,read-write,,current,disabled(0):alarmWhenHigh(1):alarmWhenLow(2),When this function is activated the external alarm input 1 is monitored. Note: alarm inputs are not available in all product versions. 
.1.3.6.1.4.1.3181.10.6.1.31.7.1.4,G6-HARDWARE-MIB::ioSignalConfigInput1Name,OCTET,read-write,,current,,A customer specific name can be specified for input 1. This name will appear in the associated event messages.
.1.3.6.1.4.1.3181.10.6.1.31.7.1.5,G6-HARDWARE-MIB::ioSignalConfigInput2Mode,INTEGER,read-write,,current,disabled(0):alarmWhenHigh(1):alarmWhenLow(2),When this function is activated the external alarm input 2 is monitored. Note: alarm inputs are not available in all product versions. 
.1.3.6.1.4.1.3181.10.6.1.31.7.1.6,G6-HARDWARE-MIB::ioSignalConfigInput2Name,OCTET,read-write,,current,,A customer specific name can be specified for input 2. This name will appear in the associated event messages.
.1.3.6.1.4.1.3181.10.6.1.31.7.1.7,G6-HARDWARE-MIB::ioSignalConfigOutput1Trigger,INTEGER,read-write,,current,disabled(0):whileRunning(1):redundancyFail(2):highTemp(3):off(4):on(5),Defines on which condition the alarm relay 1 is activated. Note: alarm relays are not available in all product versions.
.1.3.6.1.4.1.3181.10.6.1.31.7.1.8,G6-HARDWARE-MIB::ioSignalConfigOutput1Name,OCTET,read-write,,current,,A customer specific name can be specified for alarm output 1. This name will appear in the associated event messages.
.1.3.6.1.4.1.3181.10.6.1.31.7.1.9,G6-HARDWARE-MIB::ioSignalConfigOutput2Trigger,INTEGER,read-write,,current,disabled(0):whileRunning(1):redundancyFail(2):highTemp(3):off(4):on(5),Defines on which condition the alarm relay 2 is activated. Note: alarm relays are not available in all product versions.
.1.3.6.1.4.1.3181.10.6.1.31.7.1.10,G6-HARDWARE-MIB::ioSignalConfigOutput2Name,OCTET,read-write,,current,,A customer specific name can be specified for alarm output 2. This name will appear in the associated event messages.
.1.3.6.1.4.1.3181.10.6.1.31.100,G6-HARDWARE-MIB::hardwarePowerSupply1Status,INTEGER,read-only,,current,ok(0):overload(1):inputLow(2):fuseFail(3):notApplicable(4):unmanaged(5):notInstalled(6),Displays state of primary supply or only supply for single supply systems.
.1.3.6.1.4.1.3181.10.6.1.31.101,G6-HARDWARE-MIB::hardwarePowerSupply2Status,INTEGER,read-only,,current,ok(0):overload(1):inputLow(2):fuseFail(3):notApplicable(4):unmanaged(5):notInstalled(6),Displays state of secondary supply if available.
.1.3.6.1.4.1.3181.10.6.1.31.102,G6-HARDWARE-MIB::hardwareRunningOnPoe,INTEGER,read-only,,current,false(0):true(1),When set the unit currently operates on the PD input via PoE.
.1.3.6.1.4.1.3181.10.6.1.31.103,G6-HARDWARE-MIB::hardwareFanStatus,INTEGER,read-only,,current,unused(0):ok(1):degraded(2):fail(3):missing(4),Displays state of cooling fan. Indicates UNUSED in fanless devices.
.1.3.6.1.4.1.3181.10.6.1.31.104,G6-HARDWARE-MIB::hardwareSdCardStatus,INTEGER,read-only,,current,empty(0):inserted(1):writeProtected(2):writing(3),Current status of SD-card.
.1.3.6.1.4.1.3181.10.6.1.31.105,G6-HARDWARE-MIB::hardwareNumOfPorts,Integer32,read-only,,current,,Total number of Ethernet ports this hardware offers.
.1.3.6.1.4.1.3181.10.6.1.31.106,G6-HARDWARE-MIB::hardwareMaskOfExistingPorts,INTEGER,read-only,,current,,Set bit for each port that physically exisiting and could be in use.
.1.3.6.1.4.1.3181.10.6.1.31.107,G6-HARDWARE-MIB::hardwareMaskOfSfpPorts,INTEGER,read-only,,current,,Marks which ports support SFPs.
.1.3.6.1.4.1.3181.10.6.1.31.108,G6-HARDWARE-MIB::hardwareMaskOfPoePorts,INTEGER,read-only,,current,,Marks which ports support PoE output.
.1.3.6.1.4.1.3181.10.6.1.31.109,G6-HARDWARE-MIB::moduleInfoTable,,not-accessible,,current,,This section indicates which modules are inserted in the optional extension slots.
.1.3.6.1.4.1.3181.10.6.1.31.109.1,G6-HARDWARE-MIB::moduleInfoEntry,,not-accessible,moduleInfoIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.109.1.1,G6-HARDWARE-MIB::moduleInfoIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.109.1.2,G6-HARDWARE-MIB::moduleInfoUnitType,INTEGER,read-only,,current,notPresent(0):baseUnit(1):expansion(2),Identfies the general type of module.
.1.3.6.1.4.1.3181.10.6.1.31.109.1.3,G6-HARDWARE-MIB::moduleInfoArticleNumber,OCTET,read-only,,current,,The article number of the module in this slot.
.1.3.6.1.4.1.3181.10.6.1.31.109.1.4,G6-HARDWARE-MIB::moduleInfoSerialNumber,OCTET,read-only,,current,,The serial number of the module in this slot.
.1.3.6.1.4.1.3181.10.6.1.31.109.1.5,G6-HARDWARE-MIB::moduleInfoHardwareVersion,OCTET,read-only,,current,,This device hardware revision number.
.1.3.6.1.4.1.3181.10.6.1.31.109.1.6,G6-HARDWARE-MIB::moduleInfoProjectNumber,OCTET,read-only,,current,,MICROSENS project number.
.1.3.6.1.4.1.3181.10.6.1.31.109.1.7,G6-HARDWARE-MIB::moduleInfoOccupiedSlots,OCTET,read-only,,current,,Lists all slots contained in this module.
.1.3.6.1.4.1.3181.10.6.1.31.109.1.8,G6-HARDWARE-MIB::moduleInfoDescription,OCTET,read-only,,current,,Feature summary of the module.
.1.3.6.1.4.1.3181.10.6.1.31.110,G6-HARDWARE-MIB::slotInfoTable,,not-accessible,,current,,This section indicates which modules are inserted in the optional extension slots.
.1.3.6.1.4.1.3181.10.6.1.31.110.1,G6-HARDWARE-MIB::slotInfoEntry,,not-accessible,slotInfoIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.110.1.1,G6-HARDWARE-MIB::slotInfoIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.110.1.2,G6-HARDWARE-MIB::slotInfoBoardType,INTEGER,read-only,,current,notPresent(0):undefined(1):power(2):cpu(3):port(4):io(5):ms10gPort(6),General type of board function
.1.3.6.1.4.1.3181.10.6.1.31.110.1.3,G6-HARDWARE-MIB::slotInfoBoardId,Unsigned32,read-only,,current,,This identifies the board type for internal operation.
.1.3.6.1.4.1.3181.10.6.1.31.110.1.4,G6-HARDWARE-MIB::slotInfoVersionBits,Integer32,read-only,,current,,Version bits from hardware or backplane.
.1.3.6.1.4.1.3181.10.6.1.31.111,G6-HARDWARE-MIB::portInfoTable,,not-accessible,,current,,Used to map physical to logical port ids.
.1.3.6.1.4.1.3181.10.6.1.31.111.1,G6-HARDWARE-MIB::portInfoEntry,,not-accessible,portInfoPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.111.1.1,G6-HARDWARE-MIB::portInfoPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.111.1.2,G6-HARDWARE-MIB::portInfoSystemSlot,Integer32,read-only,,current,,Describes on which system slot this port index is located.
.1.3.6.1.4.1.3181.10.6.1.31.111.1.3,G6-HARDWARE-MIB::portInfoSwitchPort,Integer32,read-only,,current,,Describes on which switch port this port index is located.
.1.3.6.1.4.1.3181.10.6.1.31.111.1.4,G6-HARDWARE-MIB::portInfoUserSlot,Integer32,read-only,,current,,Slot number as seen by customer.
.1.3.6.1.4.1.3181.10.6.1.31.111.1.5,G6-HARDWARE-MIB::portInfoUserPort,Integer32,read-only,,current,,Port number as seen by customer.
.1.3.6.1.4.1.3181.10.6.1.31.111.1.6,G6-HARDWARE-MIB::portInfoSnmpPort,Integer32,read-only,,current,,Slot and port representation as used in SNMP. Formula is Slot*100 + Port.
.1.3.6.1.4.1.3181.10.6.1.31.111.1.7,G6-HARDWARE-MIB::portInfoSnmpInstance,Integer32,read-only,,current,,Port instance counting from 0 to number of ports
.1.3.6.1.4.1.3181.10.6.1.31.111.1.8,G6-HARDWARE-MIB::portInfoHardwarePort,Integer32,read-only,,current,,Port number as used internally. Ports may not be in sequential order.
.1.3.6.1.4.1.3181.10.6.1.31.111.1.9,G6-HARDWARE-MIB::portInfoInterfaceType,INTEGER,read-only,,current,copper(0):optical(1):dualMedia(2),Identifies port as copper or optical. Also used for snmp ifType definition
.1.3.6.1.4.1.3181.10.6.1.31.111.1.10,G6-HARDWARE-MIB::portInfoProperties,BITS,read-only,,current,internal(0):ms10Mb(1):ms100Mb(2):ms1000Mb(3):rj45(4):sfp(5):ms1x9(6):poe(7):poePlus(8):pd(9):dualMedia(10):linkPort(11):csfp(12),Describes which functions the port can support.
.1.3.6.1.4.1.3181.10.6.1.31.112,G6-HARDWARE-MIB::portLedsTable,,not-accessible,,current,,This section indicates the state of all port related LEDs.
.1.3.6.1.4.1.3181.10.6.1.31.112.1,G6-HARDWARE-MIB::portLedsEntry,,not-accessible,portLedsPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.112.1.1,G6-HARDWARE-MIB::portLedsPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.112.1.2,G6-HARDWARE-MIB::portLedsEthernetColor,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Ethernet Link LED.
.1.3.6.1.4.1.3181.10.6.1.31.112.1.3,G6-HARDWARE-MIB::portLedsEthernetBlinking,INTEGER,read-only,,current,false(0):true(1),Ethernet Link LED.
.1.3.6.1.4.1.3181.10.6.1.31.112.1.4,G6-HARDWARE-MIB::portLedsPoeColor,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Power over Ethernet LED. For optical ports this indicates signal detect status.
.1.3.6.1.4.1.3181.10.6.1.31.112.1.5,G6-HARDWARE-MIB::portLedsPoeBlinking,INTEGER,read-only,,current,false(0):true(1),Power over Ethernet LED. For optical ports this indicates signal detect status.
.1.3.6.1.4.1.3181.10.6.1.31.113,G6-HARDWARE-MIB::deviceLedsTable,,not-accessible,,current,,This section indicates the state of all LEDs which are not port related. Please note: Not every unit offers all LEDs.
.1.3.6.1.4.1.3181.10.6.1.31.113.1,G6-HARDWARE-MIB::deviceLedsEntry,,not-accessible,deviceLedsIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.113.1.1,G6-HARDWARE-MIB::deviceLedsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.113.1.2,G6-HARDWARE-MIB::deviceLedsSystem1Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),This status corresponds to 'sys' LED on some devices.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.3,G6-HARDWARE-MIB::deviceLedsSystem1Blinking,INTEGER,read-only,,current,false(0):true(1),This status corresponds to 'sys' LED on some devices.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.4,G6-HARDWARE-MIB::deviceLedsSystem2Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Displays external management activity.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.5,G6-HARDWARE-MIB::deviceLedsSystem2Blinking,INTEGER,read-only,,current,false(0):true(1),Displays external management activity.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.6,G6-HARDWARE-MIB::deviceLedsPowerOn1Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),This status corresponds to 'on' LED on some devices.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.7,G6-HARDWARE-MIB::deviceLedsPowerOn1Blinking,INTEGER,read-only,,current,false(0):true(1),This status corresponds to 'on' LED on some devices.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.8,G6-HARDWARE-MIB::deviceLedsPowerOn2Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Alternative power input LED.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.9,G6-HARDWARE-MIB::deviceLedsPowerOn2Blinking,INTEGER,read-only,,current,false(0):true(1),Alternative power input LED.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.10,G6-HARDWARE-MIB::deviceLedsRing1Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),This LED is used when ring protection is enabled.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.11,G6-HARDWARE-MIB::deviceLedsRing1Blinking,INTEGER,read-only,,current,false(0):true(1),This LED is used when ring protection is enabled.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.12,G6-HARDWARE-MIB::deviceLedsRing2Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),This LED is used when ring protection is enabled.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.13,G6-HARDWARE-MIB::deviceLedsRing2Blinking,INTEGER,read-only,,current,false(0):true(1),This LED is used when ring protection is enabled.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.14,G6-HARDWARE-MIB::deviceLedsSignalIn1Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Indicates status of alarm input 1.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.15,G6-HARDWARE-MIB::deviceLedsSignalIn1Blinking,INTEGER,read-only,,current,false(0):true(1),Indicates status of alarm input 1.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.16,G6-HARDWARE-MIB::deviceLedsSignalIn2Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Indicates status of alarm input 2.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.17,G6-HARDWARE-MIB::deviceLedsSignalIn2Blinking,INTEGER,read-only,,current,false(0):true(1),Indicates status of alarm input 2.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.18,G6-HARDWARE-MIB::deviceLedsSignalOut1Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Indicates status of alarm relay output 1.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.19,G6-HARDWARE-MIB::deviceLedsSignalOut1Blinking,INTEGER,read-only,,current,false(0):true(1),Indicates status of alarm relay output 1.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.20,G6-HARDWARE-MIB::deviceLedsSignalOut2Color,INTEGER,read-only,,current,off(0):blue(1):green(2):red(3):orange(4):cyan(5):magenta(6):white(7):noLed(8),Indicates status of alarm relay output 2.
.1.3.6.1.4.1.3181.10.6.1.31.113.1.21,G6-HARDWARE-MIB::deviceLedsSignalOut2Blinking,INTEGER,read-only,,current,false(0):true(1),Indicates status of alarm relay output 2.
.1.3.6.1.4.1.3181.10.6.1.31.114,G6-HARDWARE-MIB::cableTestStatusTable,,not-accessible,,current,,This table display the result of the last cable test. Values are only available for copper ports while a link is down and if the cable test function is enabled.
.1.3.6.1.4.1.3181.10.6.1.31.114.1,G6-HARDWARE-MIB::cableTestStatusEntry,,not-accessible,cableTestStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.114.1.1,G6-HARDWARE-MIB::cableTestStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.114.1.2,G6-HARDWARE-MIB::cableTestStatusUpdateTimeStamp,OCTET,read-only,,current,,Indicates the time when this record was last updated.
.1.3.6.1.4.1.3181.10.6.1.31.114.1.3,G6-HARDWARE-MIB::cableTestStatusPair0State,INTEGER,read-only,,current,notAvailable(0):pairOk(1):pairOpen(2):samePairShort(3):crossPairShort(4):terminationLow(5):terminationHigh(6),Indicates line termination test results for wire pair 0 (Pins 1/2)
.1.3.6.1.4.1.3181.10.6.1.31.114.1.4,G6-HARDWARE-MIB::cableTestStatusPair0DistanceToFault,Integer32,read-only,,current,,Distance to fault on wire pair 0 in centimeters. Indicates 0 when no fault is detected or the function is unused.
.1.3.6.1.4.1.3181.10.6.1.31.114.1.5,G6-HARDWARE-MIB::cableTestStatusPair1State,INTEGER,read-only,,current,notAvailable(0):pairOk(1):pairOpen(2):samePairShort(3):crossPairShort(4):terminationLow(5):terminationHigh(6),Indicates line termination test results for wire pair 1 (Pins 3/6)
.1.3.6.1.4.1.3181.10.6.1.31.114.1.6,G6-HARDWARE-MIB::cableTestStatusPair1DistanceToFault,Integer32,read-only,,current,,Distance to fault on wire pair 1 in centimeters. Indicates 0 when no fault is detected or the function is unused.
.1.3.6.1.4.1.3181.10.6.1.31.114.1.7,G6-HARDWARE-MIB::cableTestStatusPair2State,INTEGER,read-only,,current,notAvailable(0):pairOk(1):pairOpen(2):samePairShort(3):crossPairShort(4):terminationLow(5):terminationHigh(6),Indicates line termination test results for wire pair 2 (Pins 4/5)
.1.3.6.1.4.1.3181.10.6.1.31.114.1.8,G6-HARDWARE-MIB::cableTestStatusPair2DistanceToFault,Integer32,read-only,,current,,Distance to fault on wire pair 2 in centimeters. Indicates 0 when no fault is detected or the function is unused.
.1.3.6.1.4.1.3181.10.6.1.31.114.1.9,G6-HARDWARE-MIB::cableTestStatusPair3State,INTEGER,read-only,,current,notAvailable(0):pairOk(1):pairOpen(2):samePairShort(3):crossPairShort(4):terminationLow(5):terminationHigh(6),Indicates line termination test results for wire pair 3 (Pins 7/8)
.1.3.6.1.4.1.3181.10.6.1.31.114.1.10,G6-HARDWARE-MIB::cableTestStatusPair3DistanceToFault,Integer32,read-only,,current,,Distance to fault on wire pair 3 in centimeters. Indicates 0 when no fault is detected or the function is unused.
.1.3.6.1.4.1.3181.10.6.1.31.114.1.11,G6-HARDWARE-MIB::cableTestStatusReflectionValue,Integer32,read-only,,current,,A unitless value that indicates a measure of reflection level. For difficult to detect actively terminated devices perform a measurement with remotely plugged-in and then unplugged cable. Note the reflection values an choose a value in the middle as reflection_threshold configuration value.
.1.3.6.1.4.1.3181.10.6.1.31.114.1.12,G6-HARDWARE-MIB::cableTestStatusCableStatus,INTEGER,read-only,,current,notAvailable(0):noCable(1):pluggedInLocally(2):pluggedInRemotely(3):terminatedCable(4):terminationTooLow(5):defective(6),Indicates the concluded status summary.
.1.3.6.1.4.1.3181.10.6.1.31.115,G6-HARDWARE-MIB::ioSignalStatusTable,,not-accessible,,current,,This section is only used for devices which offer external signal inputs and outputs.
.1.3.6.1.4.1.3181.10.6.1.31.115.1,G6-HARDWARE-MIB::ioSignalStatusEntry,,not-accessible,ioSignalStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.115.1.1,G6-HARDWARE-MIB::ioSignalStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.115.1.2,G6-HARDWARE-MIB::ioSignalStatusInput1AlarmActive,INTEGER,read-only,,current,false(0):true(1),Indicates true when the input 1 is logically active.
.1.3.6.1.4.1.3181.10.6.1.31.115.1.3,G6-HARDWARE-MIB::ioSignalStatusInput2AlarmActive,INTEGER,read-only,,current,false(0):true(1),Indicates true when the input 2 is logically active.
.1.3.6.1.4.1.3181.10.6.1.31.115.1.4,G6-HARDWARE-MIB::ioSignalStatusOutput1RelayActive,INTEGER,read-only,,current,false(0):true(1),Indicates true when the output 1 relay is activated.
.1.3.6.1.4.1.3181.10.6.1.31.115.1.5,G6-HARDWARE-MIB::ioSignalStatusOutput2RelayActive,INTEGER,read-only,,current,false(0):true(1),Indicates true when the output 2 relay is activated.
.1.3.6.1.4.1.3181.10.6.1.31.116,G6-HARDWARE-MIB::tcamStatusTable,,not-accessible,,current,,The TCAM is a programmable wire speed packet filter. The filter is controlled by the system automatically. This table indicates which filters have been set.
.1.3.6.1.4.1.3181.10.6.1.31.116.1,G6-HARDWARE-MIB::tcamStatusEntry,,not-accessible,tcamStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.31.116.1.1,G6-HARDWARE-MIB::tcamStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.31.116.1.2,G6-HARDWARE-MIB::tcamStatusControlFile,OCTET,read-only,,current,,Reflects the name of the control file associated with this tcam entry.
.1.3.6.1.4.1.3181.10.6.1.31.116.1.3,G6-HARDWARE-MIB::tcamStatusDescription,OCTET,read-only,,current,,Descriptive text what explains what this tcam entry will do. 
.1.3.6.1.4.1.3181.10.6.1.32,G6-FACTORY-MIB::factory,,,,,,
.1.3.6.1.4.1.3181.10.6.1.32.1,G6-FACTORY-MIB::factoryArticleNumber,OCTET,read-only,,current,,This device article number.
.1.3.6.1.4.1.3181.10.6.1.32.2,G6-FACTORY-MIB::factorySerialNumber,OCTET,read-only,,current,,This device serial number.
.1.3.6.1.4.1.3181.10.6.1.32.3,G6-FACTORY-MIB::factoryDeviceMac,OCTET,read-only,,current,,This device MAC address.
.1.3.6.1.4.1.3181.10.6.1.32.4,G6-FACTORY-MIB::factoryNumberOfMacs,Integer32,read-only,,current,,Number of MAC addresses this device supports.
.1.3.6.1.4.1.3181.10.6.1.32.5,G6-FACTORY-MIB::factoryHardwareVersion,OCTET,read-only,,current,,This device hardware revision number.
.1.3.6.1.4.1.3181.10.6.1.32.6,G6-FACTORY-MIB::factoryBoardId,Unsigned32,read-only,,current,,This identifies the basic hardware type for internal operation.
.1.3.6.1.4.1.3181.10.6.1.32.7,G6-FACTORY-MIB::factoryProjectNumber,OCTET,read-only,,current,,Development project number.
.1.3.6.1.4.1.3181.10.6.1.32.8,G6-FACTORY-MIB::factoryMechanicalFeatures,BITS,read-only,,current,desktop(0):rail(1):ductVertical(2):ductHorizontal(3):rack(4):stackable(5):unused6(6):unused7(7):dc(8):ac(9):dualPwr(10):unused11(11):extTemp(12):extSupply(13):exSecure(14):unused15(15):unused16(16):microSd(17):sdcard(18):internalMemory(19):unused20(20):unused21(21):ip30(22):ip42(23):ip44(24):ip55(25):ip67(26):unused27(27):unused28(28):unused29(29):unused30(30):unused31(31),Bit mask which identifies mechanical features of this device.
.1.3.6.1.4.1.3181.10.6.1.32.9,G6-FACTORY-MIB::factoryHardwareFeatures,BITS,read-only,,current,poePlus(0):poePse(1):poePd(2):unused3(3):railway(4):substation(5):eee(6):synce(7):ms1588(8):usb(9):relays(10):rtc(11):max100m(12):unused13(13):unused14(14):csfp(15):sfp(16):lc(17):sc(18):st(19):e2000(20):slc(21):unused22(22):unused23(23):unused24(24):unused25(25):unused26(26):unused27(27):unused28(28):unused29(29):unused30(30):unused31(31),Bit mask which identifies installed hardware features of this device.
.1.3.6.1.4.1.3181.10.6.1.32.10,G6-FACTORY-MIB::factoryCompanyName,OCTET,read-only,,current,,Complete name and address of the manufacturing company.
.1.3.6.1.4.1.3181.10.6.1.32.11,G6-FACTORY-MIB::factoryCompanyShort,OCTET,read-only,,current,,Shorthand name of the manufacturing company.
.1.3.6.1.4.1.3181.10.6.1.32.12,G6-FACTORY-MIB::factoryWebLink,OCTET,read-only,,current,,Link to company homepage.
.1.3.6.1.4.1.3181.10.6.1.32.13,G6-FACTORY-MIB::factoryWebDescription,OCTET,read-only,,current,,Product feature summary.
.1.3.6.1.4.1.3181.10.6.1.32.14,G6-FACTORY-MIB::factoryCustomInfo,OCTET,read-write,,current,,This field can be used to permanently store custom inventory or location data. The data are stored within the device in unremovable storage and thus will persist even when the SD card or the entire configuration is changed.
.1.3.6.1.4.1.3181.10.6.1.33,G6-POE-MIB::poe,,,,,,
.1.3.6.1.4.1.3181.10.6.1.33.1,G6-POE-MIB::poePoeMaxPowerAvailable,Integer32,read-write,,current,,Defines the total power that this units power supply can support. This value is used to balance the PoE output power delivered. Please adjust according to connected power supply rating.
.1.3.6.1.4.1.3181.10.6.1.33.2,G6-POE-MIB::poeRestartPoePort,OCTET,read-write,,current,,This function may be used to briefly drop the power on a PoE port in order to reboot the attached device. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: poe.restart_poe_port = 1/2,1/5 or poe.restart_poe_port = 1-3 or equivalent poe.restart_poe_port = 1/1-1/3. 
.1.3.6.1.4.1.3181.10.6.1.33.3,G6-POE-MIB::configTable,,not-accessible,,current,,Power over Ethernet function permits the powering of connected units which do not use their own local power supply.
.1.3.6.1.4.1.3181.10.6.1.33.3.1,G6-POE-MIB::configEntry,,not-accessible,configPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.33.3.1.1,G6-POE-MIB::configPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.33.3.1.2,G6-POE-MIB::configMode,INTEGER,read-write,,current,disabled(0):automatic(1):class0(2):class1(3):class2(4):class3(5):class4(6):forcedOn(7),Used to enable or disable PoE function.
.1.3.6.1.4.1.3181.10.6.1.33.3.1.3,G6-POE-MIB::configPriorityPort,INTEGER,read-write,,current,disabled(0):enabled(1),Ports without priority may be switched off under a power contention situation.
.1.3.6.1.4.1.3181.10.6.1.33.3.1.4,G6-POE-MIB::configEnablePoePlus,INTEGER,read-write,,current,disabled(0):enabled(1):lldpControlled(2),Allow between 15-30W power consumption.
.1.3.6.1.4.1.3181.10.6.1.33.100,G6-POE-MIB::poeTotalPowerConsumed,Unsigned32,read-only,,current,,The sum of power currently delivered to all ports. (units: mW)
.1.3.6.1.4.1.3181.10.6.1.33.101,G6-POE-MIB::statusTable,,not-accessible,,current,,This table list the current PoE port conditions.
.1.3.6.1.4.1.3181.10.6.1.33.101.1,G6-POE-MIB::statusEntry,,not-accessible,statusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.33.101.1.1,G6-POE-MIB::statusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.33.101.1.2,G6-POE-MIB::statusCondition,INTEGER,read-only,,current,disabled(0):powerOff(1):discovering(2):powered(3):classMismatch(4):shortCircuit(5):rejected(6):overCurrent(7):overTemp(8):voltageTooLow(9),PoE status and conditions.
.1.3.6.1.4.1.3181.10.6.1.33.101.1.3,G6-POE-MIB::statusDeterminedClass,INTEGER,read-only,,current,isClass0(0):isClass1(1):isClass2(2):isClass3(3):isClass4(4):isOverload(5):probesNotEqual(7):isUnknown(255),Determined and negotiated PoE class.
.1.3.6.1.4.1.3181.10.6.1.33.101.1.4,G6-POE-MIB::statusOutputCurrent,Integer32,read-only,,current,,Current delivered to the attached device. (units: mA)
.1.3.6.1.4.1.3181.10.6.1.33.101.1.5,G6-POE-MIB::statusOutputVoltage,Integer32,read-only,,current,,Voltage deliverd to the attached device. (units: mV)
.1.3.6.1.4.1.3181.10.6.1.33.101.1.6,G6-POE-MIB::statusOutputPower,Integer32,read-only,,current,,Calculated power delivered to the attached device. (units: mW)
.1.3.6.1.4.1.3181.10.6.1.33.101.1.7,G6-POE-MIB::statusPowerDeniedCounter,Unsigned32,read-only,,current,,Incremented whenever a PoE request was denied regardless of reason.
.1.3.6.1.4.1.3181.10.6.1.33.101.1.8,G6-POE-MIB::statusOverCurrentCounter,Unsigned32,read-only,,current,,Incremented whenever an over_current condition was detected.
.1.3.6.1.4.1.3181.10.6.1.33.101.1.9,G6-POE-MIB::statusShortCircuitCounter,Unsigned32,read-only,,current,,Incremented whenever a short circuit was detected.
.1.3.6.1.4.1.3181.10.6.1.33.102,G6-POE-MIB::energySuppliedTable,,not-accessible,,current,,This table list the power provided via PoE ports. The values are automatically updated in the given interval.
.1.3.6.1.4.1.3181.10.6.1.33.102.1,G6-POE-MIB::energySuppliedEntry,,not-accessible,energySuppliedPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.33.102.1.1,G6-POE-MIB::energySuppliedPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.33.102.1.2,G6-POE-MIB::energySuppliedLast5Seconds,Unsigned32,read-only,,current,,Energy supplied in the past 5 seconds. Value in joule.
.1.3.6.1.4.1.3181.10.6.1.33.102.1.3,G6-POE-MIB::energySuppliedLast15Seconds,Unsigned32,read-only,,current,,Energy supplied in the past 15 seconds. Value in joule.
.1.3.6.1.4.1.3181.10.6.1.33.102.1.4,G6-POE-MIB::energySuppliedLastMinute,Unsigned32,read-only,,current,,Energy supplied in the past 60 seconds. Value in joule.
.1.3.6.1.4.1.3181.10.6.1.33.102.1.5,G6-POE-MIB::energySuppliedLast15Minutes,Unsigned32,read-only,,current,,Energy supplied in the past 15 minutes. Value in joule.
.1.3.6.1.4.1.3181.10.6.1.33.102.1.6,G6-POE-MIB::energySuppliedLastHour,Unsigned32,read-only,,current,,Energy supplied in the past hour. Value in joule.
.1.3.6.1.4.1.3181.10.6.1.33.102.1.7,G6-POE-MIB::energySuppliedLastDay,Unsigned32,read-only,,current,,Energy supplied in the past day. Value in joule.
.1.3.6.1.4.1.3181.10.6.1.34,G6-SFP-MIB::sfp,,,,,,
.1.3.6.1.4.1.3181.10.6.1.34.1,G6-SFP-MIB::configTable,,not-accessible,,current,,These setting apply to each SFP in the system.
.1.3.6.1.4.1.3181.10.6.1.34.1.1,G6-SFP-MIB::configEntry,,not-accessible,configIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.34.1.1.1,G6-SFP-MIB::configIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.34.1.1.2,G6-SFP-MIB::configLossOfSignalEvent,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled a loss of optical signal or the return of the signal will create an event.
.1.3.6.1.4.1.3181.10.6.1.34.1.1.3,G6-SFP-MIB::configOpticalDeltaDetect,INTEGER,read-write,,current,disabled(0):enabled(1),An optical receive power level change of more than delta_threshold between two successive read cycles generates an event.
.1.3.6.1.4.1.3181.10.6.1.34.1.1.4,G6-SFP-MIB::configDeltaThreshold,Integer32,read-write,,current,,Defines the dB difference required to trigger an event. Only 1 dB steps are permitted. A value of 0 detects any change. This setting is only for testing. Recommended value: 2. 
.1.3.6.1.4.1.3181.10.6.1.34.100,G6-SFP-MIB::informationTable,,not-accessible,,current,,This table displays data which are read from the inserted SFPs.
.1.3.6.1.4.1.3181.10.6.1.34.100.1,G6-SFP-MIB::informationEntry,,not-accessible,informationPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.34.100.1.1,G6-SFP-MIB::informationPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.34.100.1.2,G6-SFP-MIB::informationPort,INTEGER,read-only,,current,,Indicates the physical port in which this SFP is inserted.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.3,G6-SFP-MIB::informationLocation,OCTET,read-only,,current,,Textual description of SFP location.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.4,G6-SFP-MIB::informationStatus,BITS,read-only,,current,ok(0):laserDisabled(1):lossOfSignal(2):txFailure(3):readError(4),Should indicate OK. LOSS_OF_SIGNAL is shown when the optical receive power level is below the critical lower limit.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.5,G6-SFP-MIB::informationType,INTEGER,read-only,,current,empty(0):unknown(1):sfp(2):gbic(3):sff(4):dwdmSfp(5):xfp(7):csfpA(8):csfpB(9):dwdmXfp(10):sfpPlus(11),This parameter shows which type of optics are installed
.1.3.6.1.4.1.3181.10.6.1.34.100.1.6,G6-SFP-MIB::informationConnector,INTEGER,read-only,,current,unknown(0):lc(1):sc(2):mtRj(3):rj45(4):mu(5),Shows which connector is used with this SFP.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.7,G6-SFP-MIB::informationWavelength,OCTET,read-only,,current,,Nominal wavelength if this SFP. May also indicate ITU channel for DWDM optics.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.8,G6-SFP-MIB::informationTxTechnology,OCTET,read-only,,current,,Distinguishes between multimode and single mode SFP. For DWDM SFP more details including grid are shown.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.9,G6-SFP-MIB::informationRxTechnology,OCTET,read-only,,current,,Distinguishes between normal PIN receivers and more sensitive APD receivers.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.10,G6-SFP-MIB::informationNominalBitrate,OCTET,read-only,,current,,Nominal bitrate rounded to nearest 100Mbit. Usually the SFP can be operated at lower speed as well.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.11,G6-SFP-MIB::informationManufacturer,OCTET,read-only,,current,,Shows the manufacturer of this SFP.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.12,G6-SFP-MIB::informationPartNumber,OCTET,read-only,,current,,Shows the part number of this SFP. This will differ from the MICROSENS order code unless also MICROSENS is indicated as manufacturer.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.13,G6-SFP-MIB::informationRevision,OCTET,read-only,,current,,Internal revision code of this SFP.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.14,G6-SFP-MIB::informationSerialNumber,OCTET,read-only,,current,,Serial number of the SFP.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.15,G6-SFP-MIB::informationMfgDateCode,OCTET,read-only,,current,,Manufacturing date code. 
.1.3.6.1.4.1.3181.10.6.1.34.100.1.16,G6-SFP-MIB::informationWarnings,BITS,read-only,,current,txPowerLow(0):txPowerHigh(1):txBiasLow(2):txBiasHigh(3):vccLow(4):vccHigh(5):tempLow(6):tempHigh(7):rxPowerLow(8):rxPowerHigh(9),
.1.3.6.1.4.1.3181.10.6.1.34.100.1.17,G6-SFP-MIB::informationAlarms,BITS,read-only,,current,txPowerTooLow(0):txPowerTooHigh(1):txBiasTooLow(2):txBiasTooHigh(3):vccTooLow(4):vccTooHigh(5):tempTooLow(6):tempTooHigh(7):rxPowerTooLow(8):rxPowerTooHigh(9),
.1.3.6.1.4.1.3181.10.6.1.34.100.1.18,G6-SFP-MIB::informationTxPower,OCTET,read-only,,current,,Indicates the optical output in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.19,G6-SFP-MIB::informationRxPower,OCTET,read-only,,current,,Indicates the optical input in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.20,G6-SFP-MIB::informationTemperature,OCTET,read-only,,current,,Displays the temperature inside the SFP. This is usually higher than the system temperature.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.21,G6-SFP-MIB::informationMaxLength9Um,OCTET,read-only,,current,,Displays nominal maximum reach of this SFP on a standard single mode fiber.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.22,G6-SFP-MIB::informationMaxLength50Um,OCTET,read-only,,current,,Displays nominal maximum reach of this SFP on a 50 micro meter multimode fiber.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.23,G6-SFP-MIB::informationMaxLength62Um,OCTET,read-only,,current,,Displays nominal maximum reach of this SFP on a 62.5 micro meter multimode fiber.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.24,G6-SFP-MIB::informationMaxLengthCopper,OCTET,read-only,,current,,Displays nominal maximum reach of this SFP on a copper cable. Only applies to electrical SFP.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.25,G6-SFP-MIB::informationTuningRange,OCTET,read-only,,current,,For wavelength tunable optics additional details are shown here.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.26,G6-SFP-MIB::informationPowerConsumption,OCTET,read-only,,current,,Typcial power consumption values are shown if available from the interface.
.1.3.6.1.4.1.3181.10.6.1.34.100.1.27,G6-SFP-MIB::informationAdditionalInformation,OCTET,read-only,,current,,Some special SFP can supply additional measurement data. For example OTDR reflection data can be listed here.
.1.3.6.1.4.1.3181.10.6.1.81,G6-PORT-MIB::port,,,,,,
.1.3.6.1.4.1.3181.10.6.1.81.1,G6-PORT-MIB::configTable,,not-accessible,,current,,This section defines the basic configuration parameter for each port.
.1.3.6.1.4.1.3181.10.6.1.81.1.1,G6-PORT-MIB::configEntry,,not-accessible,configPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.81.1.1.1,G6-PORT-MIB::configPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.81.1.1.2,G6-PORT-MIB::configAlias,OCTET,read-write,,current,,Alternative descriptive port name, user defineable.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.3,G6-PORT-MIB::configPortOperation,INTEGER,read-write,,current,disabled(0):enabled(1),Enables the port for operation. When disabled, port is shut down.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.4,G6-PORT-MIB::configRole,INTEGER,read-write,,current,default(0):local(1):uplink(2):downlink(3),Defines is a port is a regular local user port or a link to the network. This setting is references in various sanity checks throughout the system. When in doubt leave at default setting.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.5,G6-PORT-MIB::configSpeed,INTEGER,read-write,,current,ms10Mbit(0):ms100Mbit(1):ms1000Mbit(2):sfpAuto(3),When Auto-Negotiation is disabled sets the ports data rate to the selected speed. When Auto-Negotiation is enabled it determines the highest data rate advertised on port.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.6,G6-PORT-MIB::configMtu,INTEGER,read-write,,current,ms1522Byte(0):ms2048Byte(1):ms10240Byte(2),MTU used only to have a place holder for SNMP ifTable
.1.3.6.1.4.1.3181.10.6.1.81.1.1.7,G6-PORT-MIB::configLoopProtection,INTEGER,read-write,,current,disabled(0):enabled(1),Loop protection detects ethernet loops that can occur when cables are plugged in a way that the data send out of a port come back to the switch on another port. This will result in a data loop of endless packets. Such a loop condition seriously affects network performance and must be avoided.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.8,G6-PORT-MIB::configAutoNegotiation,INTEGER,read-write,,current,disabled(0):enabled(1),Enables Auto-Negotiation mode. When Auto-Negotiation mode is enabled, the parameters speed, full_duplex and flow_control determine the advertised port abilites. When Auto-Negotiation is disabled, the parameters speed, full_duplex and flow_control determine the fixed port configuration. Auto-Negotiation is not available for fiber ports in 100 Mbps mode and must be switched off.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.9,G6-PORT-MIB::configFullDuplex,INTEGER,read-write,,current,disabled(0):enabled(1),When Auto-Negotiation is disabled sets port to full duplex operation (when disabled, port is in half duplex mode). When Auto-Negotiation is enabled, it determines the advertisement of full duplex capability.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.10,G6-PORT-MIB::configFlowcontrol,INTEGER,read-write,,current,disabled(0):enabled(1),When Auto-Negotiation is disabled sets port into flow control mode. When Auto-Negotiation is enabled, it determines the advertisement of flow control capability. Flow control is only supported when port is in full duplex mode.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.11,G6-PORT-MIB::configMdiMode,INTEGER,read-write,,current,auto(0):forceMdiStd(1):forceMdix(2),Enables Auto MDI/MDI-X mode to automatically adapt port pinout to cable type used. When set to forced, port pinout is fixed.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.12,G6-PORT-MIB::configEnergyEfficiency,INTEGER,read-write,,current,disabled(0):enabled(1),Enable Energy Efficient Ethernet mode is only available for copper ports in 1000Base-T mode.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.13,G6-PORT-MIB::configDualMediaMode,INTEGER,read-write,,current,fiberPriority(0):copperPriority(1):forceFiber(2):forceCopper(3),Define media selection for dual media ports. This function is only available on ports with dual media Phy.
.1.3.6.1.4.1.3181.10.6.1.81.1.1.14,G6-PORT-MIB::configAllowedOutgoingPorts,INTEGER,read-write,,current,,This bitmask may be used to limit the outgoing traffic to certain ports. This feature is also known as port based vlan. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)
.1.3.6.1.4.1.3181.10.6.1.81.2,G6-PORT-MIB::monitorTable,,not-accessible,,current,,Port monitoring is a test tool which permits reading data from on port on another port for trouble shooting purposes.
.1.3.6.1.4.1.3181.10.6.1.81.2.1,G6-PORT-MIB::monitorEntry,,not-accessible,monitorIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.81.2.1.1,G6-PORT-MIB::monitorIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.81.2.1.2,G6-PORT-MIB::monitorMode,INTEGER,read-write,,current,disabled(0):txOnly(1):rxOnly(2):rxAndTx(3),Defines in which mode of port monitoring operation is used. Default is DISABLED for normal operation.
.1.3.6.1.4.1.3181.10.6.1.81.2.1.3,G6-PORT-MIB::monitorSource,INTEGER,read-write,,current,,Source port(2) of which the traffic is to be monitored. CLI Syntax: 1/1 for first port. 1/1,1/3 for first and third port
.1.3.6.1.4.1.3181.10.6.1.81.2.1.4,G6-PORT-MIB::monitorDestination,Integer32,read-write,,current,,Port on which the traffic monitored on the source port shall be copied to. Normally a network sniffer is connected to this port. Please observe that possibly the VLAN setting of the destination port must match the that of the monitored ports. CLI Syntax: 1/1 for first port.
.1.3.6.1.4.1.3181.10.6.1.81.3,G6-PORT-MIB::portRestartPort,OCTET,read-write,,current,,This function may be used to briefly disabled and enable the port. This may be used to restart port authentication for example. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: restart_port = 1/2,1/5. 
.1.3.6.1.4.1.3181.10.6.1.81.100,G6-PORT-MIB::portUplinkPorts,INTEGER,read-only,,current,,Indicates which port(s) are connected to the network. The setting is derived from default setting and may be overridden by port.role setting.
.1.3.6.1.4.1.3181.10.6.1.81.101,G6-PORT-MIB::portDownlinkPorts,INTEGER,read-only,,current,,Indicates to which port(s) a downstream switch is connected. The setting is derived from default setting and may be overridden by port.role setting.
.1.3.6.1.4.1.3181.10.6.1.81.102,G6-PORT-MIB::statusTable,,not-accessible,,current,,This status table indicates current port status and (negotiated) settings. It also displays if a port is logically blocked due to a certain protocol condition.
.1.3.6.1.4.1.3181.10.6.1.81.102.1,G6-PORT-MIB::statusEntry,,not-accessible,statusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.81.102.1.1,G6-PORT-MIB::statusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.81.102.1.2,G6-PORT-MIB::statusLinkUp,INTEGER,read-only,,current,false(0):true(1),False: Link is down, True: Link is up. For dual media ports this indicates the status of the active media.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.3,G6-PORT-MIB::statusLastLinkChange,OCTET,read-only,,current,,Time when the link_up status changed the last time. Value may appear illogical if the system time is not properly set.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.4,G6-PORT-MIB::statusLinkState,INTEGER,read-only,,current,linkDown(0):blocking(1):learning(2):forwarding(3):unauthVlan(4),Logical port status.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.5,G6-PORT-MIB::statusRxActivity,INTEGER,read-only,,current,false(0):true(1),Indicates true when data activity on the receiver is detected.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.6,G6-PORT-MIB::statusTxActivity,INTEGER,read-only,,current,false(0):true(1),Indicates true when data activity on the transmitter is detected.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.7,G6-PORT-MIB::statusMediaUsed,INTEGER,read-only,,current,none(0):copper(1):fiber(2),indicates which media is used for dual media ports
.1.3.6.1.4.1.3181.10.6.1.81.102.1.8,G6-PORT-MIB::statusSpeedUsed,INTEGER,read-only,,current,down(0):ms10Mbit(1):ms100Mbit(2):ms1000Mbit(3),Actual (negotiated) port data rate.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.9,G6-PORT-MIB::statusLoopedPort,INTEGER,read-only,,current,,Usually empty. When a port loop is detected through loop protection function then the looped port is indicated here.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.10,G6-PORT-MIB::statusFullDuplexUsed,INTEGER,read-only,,current,none(0):full(1):half(2),False: Half duplex, True: Full duplex.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.11,G6-PORT-MIB::statusFlowcontrolUsed,INTEGER,read-only,,current,false(0):true(1),False: No flow control, True: Use flow control.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.12,G6-PORT-MIB::statusMdiUsed,INTEGER,read-only,,current,false(0):true(1),False: MDI pinout, True: MDI-X pinout.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.13,G6-PORT-MIB::statusEeeActive,INTEGER,read-only,,current,false(0):true(1),When true Energy Efficent Ethernet is supported by both ends of the link and is active.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.14,G6-PORT-MIB::statusBlockingAlgorithm,BITS,read-only,,current,portIsEnabled(0):ms8021xApplies(1):rstpApplies(2):ringApplies(3):couplingApplies(4):loopPreventionApplies(5):macAuthApplies(6):bpduGuardApplies(7):dhcpFilterApplies(8),Flags indicate blocking request by which algorithm per port.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.15,G6-PORT-MIB::statusLearningAlgorithm,BITS,read-only,,current,portIsEnabled(0):ms8021xApplies(1):rstpApplies(2):ringApplies(3):couplingApplies(4):loopPreventionApplies(5):macAuthApplies(6):bpduGuardApplies(7):dhcpFilterApplies(8),Flags indicate learning request by which algorithm per port.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.16,G6-PORT-MIB::statusForwardingAlgorithm,BITS,read-only,,current,portIsEnabled(0):ms8021xApplies(1):rstpApplies(2):ringApplies(3):couplingApplies(4):loopPreventionApplies(5):macAuthApplies(6):bpduGuardApplies(7):dhcpFilterApplies(8),Flags indicate forwarding request by which algorithm per port.
.1.3.6.1.4.1.3181.10.6.1.81.102.1.17,G6-PORT-MIB::statusUnauthorizedAlgorithm,BITS,read-only,,current,portIsEnabled(0):ms8021xApplies(1):rstpApplies(2):ringApplies(3):couplingApplies(4):loopPreventionApplies(5):macAuthApplies(6):bpduGuardApplies(7):dhcpFilterApplies(8),Flags indicate use of unauthorized vlan request by which algorithm per port.
.1.3.6.1.4.1.3181.10.6.1.85,G6-RMON-MIB::rmon,,,,,,
.1.3.6.1.4.1.3181.10.6.1.85.1,G6-RMON-MIB::rmonClearAllCounter,OCTET,read-write,,current,,When executed all rmon counters of all ports are reset to 0. This has no service implications.
.1.3.6.1.4.1.3181.10.6.1.85.100,G6-RMON-MIB::ingressTable,,not-accessible,,current,,Statistics regarding inbound traffic
.1.3.6.1.4.1.3181.10.6.1.85.100.1,G6-RMON-MIB::ingressEntry,,not-accessible,ingressPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.85.100.1.1,G6-RMON-MIB::ingressPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.85.100.1.2,G6-RMON-MIB::ingressEntryStatus,INTEGER,read-only,,current,invalid(0):valid(1),Indicated whether this ports table is updated and valid.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.3,G6-RMON-MIB::ingressInGoodOctetsLo,Unsigned32,read-only,,current,,Number of bytes received without error (low)
.1.3.6.1.4.1.3181.10.6.1.85.100.1.4,G6-RMON-MIB::ingressInGoodOctetsHi,Unsigned32,read-only,,current,,Number of bytes received without error (high)
.1.3.6.1.4.1.3181.10.6.1.85.100.1.5,G6-RMON-MIB::ingressInBadOctets,Unsigned32,read-only,,current,,Number of bytes received with error.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.6,G6-RMON-MIB::ingressInTotalPackets,Unsigned32,read-only,,current,,Number of packets on any type received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.7,G6-RMON-MIB::ingressInUnicasts,Unsigned32,read-only,,current,,Number of unicast packets received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.8,G6-RMON-MIB::ingressInNonUnicasts,Unsigned32,read-only,,current,,Number of packets which are non unicast type.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.9,G6-RMON-MIB::ingressInBroadcasts,Unsigned32,read-only,,current,,Number of broadcast packets received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.10,G6-RMON-MIB::ingressInMulticasts,Unsigned32,read-only,,current,,Number of multicast packets received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.11,G6-RMON-MIB::ingressInPause,Unsigned32,read-only,,current,,Number of pause frames received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.12,G6-RMON-MIB::ingressInTotalReceiveErrors,Unsigned32,read-only,,current,,Number of packets received with any kind of error.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.13,G6-RMON-MIB::ingressInUndersize,Unsigned32,read-only,,current,,Number of undersized frames received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.14,G6-RMON-MIB::ingressInOversize,Unsigned32,read-only,,current,,Number of oversizeded frames received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.15,G6-RMON-MIB::ingressInFragments,Unsigned32,read-only,,current,,Number of fragmented frames received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.16,G6-RMON-MIB::ingressInJabber,Unsigned32,read-only,,current,,Number of jabbers received.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.17,G6-RMON-MIB::ingressInFcsErrors,Unsigned32,read-only,,current,,Number of checksum errors.
.1.3.6.1.4.1.3181.10.6.1.85.100.1.18,G6-RMON-MIB::ingressInDiscarded,Unsigned32,read-only,,current,,Number of frames discard due to lack of internal buffer space.
.1.3.6.1.4.1.3181.10.6.1.85.101,G6-RMON-MIB::egressTable,,not-accessible,,current,,Statistics regarding outbound traffic
.1.3.6.1.4.1.3181.10.6.1.85.101.1,G6-RMON-MIB::egressEntry,,not-accessible,egressPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.85.101.1.1,G6-RMON-MIB::egressPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.85.101.1.2,G6-RMON-MIB::egressOutGoodOctetsLo,Unsigned32,read-only,,current,,Number of bytes transmitted without error (low)
.1.3.6.1.4.1.3181.10.6.1.85.101.1.3,G6-RMON-MIB::egressOutGoodOctetsHi,Unsigned32,read-only,,current,,Number of bytes transmitted without error (high)
.1.3.6.1.4.1.3181.10.6.1.85.101.1.4,G6-RMON-MIB::egressOutUnicasts,Unsigned32,read-only,,current,,Number of unicast packets transmitted
.1.3.6.1.4.1.3181.10.6.1.85.101.1.5,G6-RMON-MIB::egressOutNonUnicasts,Unsigned32,read-only,,current,,Number of packets which are non unicast type
.1.3.6.1.4.1.3181.10.6.1.85.101.1.6,G6-RMON-MIB::egressOutBroadcasts,Unsigned32,read-only,,current,,Number of broadcast packets transmitted
.1.3.6.1.4.1.3181.10.6.1.85.101.1.7,G6-RMON-MIB::egressOutMulticasts,Unsigned32,read-only,,current,,Number of multicast packets transmitted
.1.3.6.1.4.1.3181.10.6.1.85.101.1.8,G6-RMON-MIB::egressOutPause,Unsigned32,read-only,,current,,Number of pause frames transmitted
.1.3.6.1.4.1.3181.10.6.1.85.101.1.9,G6-RMON-MIB::egressOutDeferred,Unsigned32,read-only,,current,,Number of deferred frames due to a busy condition. This is not an error condition.
.1.3.6.1.4.1.3181.10.6.1.85.101.1.10,G6-RMON-MIB::egressOutTotalCollisions,Unsigned32,read-only,,current,,Number of all collisions that have occurred on that port. A collision may occure on a half-duplex interface detecting an incoming packet at the time it was trying to transmit a packet.
.1.3.6.1.4.1.3181.10.6.1.85.101.1.11,G6-RMON-MIB::egressOutSingleCollisions,Unsigned32,read-only,,current,,Number of times the port has experienced a single collision when attempting to transmit a packet.
.1.3.6.1.4.1.3181.10.6.1.85.101.1.12,G6-RMON-MIB::egressOutMultipleCollisions,Unsigned32,read-only,,current,,Number of times the port has experienced a multiple collision when attempting to transmit a packet.
.1.3.6.1.4.1.3181.10.6.1.85.101.1.13,G6-RMON-MIB::egressOutExcessiveCollisions,Unsigned32,read-only,,current,,Number of times a packet could not be sent due to repeated collisions on the same packet..
.1.3.6.1.4.1.3181.10.6.1.85.101.1.14,G6-RMON-MIB::egressOutLateCollisions,Unsigned32,read-only,,current,,Number of times a late collision has occured. A late collision occurs when the switch detects an incoming packet after it has already transmitted more than 64 bytes of its current outgoing packet. This indicates a half duplex - full duplex mismatch.
.1.3.6.1.4.1.3181.10.6.1.85.101.1.15,G6-RMON-MIB::egressOutFcsErrors,Unsigned32,read-only,,current,,Number of checksum errors
.1.3.6.1.4.1.3181.10.6.1.85.101.1.16,G6-RMON-MIB::egressOutDroppedPackets,Unsigned32,read-only,,current,,Number of good outgoing frames that were dropped due to outgoing policies
.1.3.6.1.4.1.3181.10.6.1.85.102,G6-RMON-MIB::histogramTable,,not-accessible,,current,,The histogram indicates the packet size distribution for incoming data per port.
.1.3.6.1.4.1.3181.10.6.1.85.102.1,G6-RMON-MIB::histogramEntry,,not-accessible,histogramPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.85.102.1.1,G6-RMON-MIB::histogramPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.85.102.1.2,G6-RMON-MIB::histogramIn64Octets,Unsigned32,read-only,,current,,Number of minimum size frames received
.1.3.6.1.4.1.3181.10.6.1.85.102.1.3,G6-RMON-MIB::histogramIn65To127Octets,Unsigned32,read-only,,current,,Number of frames with size between 65 and 127 bytes received
.1.3.6.1.4.1.3181.10.6.1.85.102.1.4,G6-RMON-MIB::histogramIn128To255Octets,Unsigned32,read-only,,current,,Number of frames with size between 128 and 255 bytes received
.1.3.6.1.4.1.3181.10.6.1.85.102.1.5,G6-RMON-MIB::histogramIn256To511Octets,Unsigned32,read-only,,current,,Number of frames with size between 256 and 511 bytes received
.1.3.6.1.4.1.3181.10.6.1.85.102.1.6,G6-RMON-MIB::histogramIn512To1023Octets,Unsigned32,read-only,,current,,Number of frames with size between 512 and 1023 bytes received
.1.3.6.1.4.1.3181.10.6.1.85.102.1.7,G6-RMON-MIB::histogramIn1024ToMaxOctets,Unsigned32,read-only,,current,,Number of frames with size above 1023 bytes received
.1.3.6.1.4.1.3181.10.6.1.85.103,G6-RMON-MIB::utilizationTable,,not-accessible,,current,,Calculates averaged data utilization values for each port.
.1.3.6.1.4.1.3181.10.6.1.85.103.1,G6-RMON-MIB::utilizationEntry,,not-accessible,utilizationPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.85.103.1.1,G6-RMON-MIB::utilizationPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.85.103.1.2,G6-RMON-MIB::utilizationIngressNow,Integer32,read-only,,current,,Percentage of received utilization in the last second.
.1.3.6.1.4.1.3181.10.6.1.85.103.1.3,G6-RMON-MIB::utilizationIngress30s,Integer32,read-only,,current,,Percentage of received utilization averaged over last 30s.
.1.3.6.1.4.1.3181.10.6.1.85.103.1.4,G6-RMON-MIB::utilizationIngress5min,Integer32,read-only,,current,,Percentage of received utilization averaged over last 5 minutes.
.1.3.6.1.4.1.3181.10.6.1.85.103.1.5,G6-RMON-MIB::utilizationEgressNow,Integer32,read-only,,current,,Percentage of outgoing utilization in the last second.
.1.3.6.1.4.1.3181.10.6.1.85.103.1.6,G6-RMON-MIB::utilizationEgress30s,Integer32,read-only,,current,,Percentage of outgoing utilization averaged over last 30s.
.1.3.6.1.4.1.3181.10.6.1.85.103.1.7,G6-RMON-MIB::utilizationEgress5min,Integer32,read-only,,current,,Percentage of outgoing utilization averaged over last 5 minutes.
.1.3.6.1.4.1.3181.10.6.1.86,G6-MAC-MIB::mac,,,,,,
.1.3.6.1.4.1.3181.10.6.1.86.1,G6-MAC-MIB::macFilterPort,OCTET,read-write,,current,,Filter MAC table to show only MACs associated with a given port range. The shorthand port format like 1 for 1/1 may be used. Syntax examples: mac.filter_port = 1/2,1/5 or mac.filter_port = 1-3,5. 
.1.3.6.1.4.1.3181.10.6.1.86.2,G6-MAC-MIB::macFilterUserPorts,OCTET,read-write,,current,,Filter MAC table to show only MACs associated with user ports. This excluded the links. This view eliminates MACs which are not of local interest. No parameter is required.
.1.3.6.1.4.1.3181.10.6.1.86.3,G6-MAC-MIB::macFilterVlan,OCTET,read-write,,current,,Filter MAC table to show only MACs associated with a given VLAN range. Supply VLAN ID as parameter. Syntax example: mac.filter_vlan = 1-4,1000-2000.
.1.3.6.1.4.1.3181.10.6.1.86.4,G6-MAC-MIB::macFilterMac,OCTET,read-write,,current,,Filter MAC table to find a specific MAC address and return the associated port and VLAN. Supply MAC address as parameter. Enter only the first 3 value pairs of the MAC to search for vendor MACs. Syntax example: mac.filter_mac = 01:22:3A.
.1.3.6.1.4.1.3181.10.6.1.86.5,G6-MAC-MIB::macFilterCustom,OCTET,read-write,,current,,Filter MAC table according to supplied rules: [ -m MAC ] [ -s SEPARATOR ] [ -p PORTS ] [ -v VLANS ] or do not enter any parameter and see all MACs.
.1.3.6.1.4.1.3181.10.6.1.86.6,G6-MAC-MIB::macFilterMulticastVlan,OCTET,read-write,,current,,Filter MAC table to show only multicast MACs associated with a given VLAN range. Supply VLAN ID as parameter. Syntax example: mac.filter_multicast_vlan = 1-4,1000-2000.
.1.3.6.1.4.1.3181.10.6.1.86.7,G6-MAC-MIB::macFilterMulticastPort,OCTET,read-write,,current,,Filter MAC table to show only multicast MACs associated with a given port range. Supply port as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: mac.filter_multicast_port = 1/2,1/5 or mac.filter_multicast_port = 1-3,5.
.1.3.6.1.4.1.3181.10.6.1.86.8,G6-MAC-MIB::macClearLearnedMacTable,OCTET,read-write,,current,,Wipe out all learned MAC addresses. Static entries are kept intact. No parameter required.
.1.3.6.1.4.1.3181.10.6.1.86.9,G6-MAC-MIB::macClearMacTableForVlan,OCTET,read-write,,current,,Wipe out all MAC addresses for a given VLAN. Please provide the VLAN ID as parameter.
.1.3.6.1.4.1.3181.10.6.1.86.10,G6-MAC-MIB::macHideMacsOnLinkPorts,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled only MACs on local access ports are listed in the MAC table. The MAC entires associated with link ports are excluded. This may significanly reduce the number of shown entires and also speed MAC table reading via SNMP.
.1.3.6.1.4.1.3181.10.6.1.86.11,G6-MAC-MIB::macGlobalAgingTime,Integer32,read-write,,current,,The MAC aging timeout can be configured in steps of 15 seconds. The nearest value is taken.
.1.3.6.1.4.1.3181.10.6.1.86.100,G6-MAC-MIB::macNumberOfEntries,Integer32,read-only,,current,,Total number of MAC address entries in the table.
.1.3.6.1.4.1.3181.10.6.1.86.101,G6-MAC-MIB::macNumberOfIgmpEntries,Integer32,read-only,,current,,Number of multicast MAC address entries in the table related to IGMP or MLD snooping.
.1.3.6.1.4.1.3181.10.6.1.86.102,G6-MAC-MIB::macUsedAgingTime,Integer32,read-only,,current,,The actually used aging time which may be modfied by RSTP or local setting mac.global_aging_time
.1.3.6.1.4.1.3181.10.6.1.86.103,G6-MAC-MIB::macNumberOfHiddenEntires,Integer32,read-only,,current,,When the mac.hide_macs_on_link_ports parameter is enabled, this value indicates how many MACs associated with link ports are not shown.
.1.3.6.1.4.1.3181.10.6.1.86.104,G6-MAC-MIB::macTableTable,,not-accessible,,current,,This table lists all MAC addresses maintained by the device. This is an unfiltered list.
.1.3.6.1.4.1.3181.10.6.1.86.104.1,G6-MAC-MIB::macTableEntry,,not-accessible,macTableIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.86.104.1.1,G6-MAC-MIB::macTableIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.86.104.1.2,G6-MAC-MIB::macTableMac,OCTET,read-only,,current,,MAC address entry
.1.3.6.1.4.1.3181.10.6.1.86.104.1.3,G6-MAC-MIB::macTablePort,Integer32,read-only,,current,,Port number for MAC address
.1.3.6.1.4.1.3181.10.6.1.86.104.1.4,G6-MAC-MIB::macTableState,INTEGER,read-only,,current,unused(0):other(1):invalid(2):learned(3):self(4):pacc(5):multicast(6),Entry state indicates further details.
.1.3.6.1.4.1.3181.10.6.1.86.104.1.5,G6-MAC-MIB::macTableVlan,Integer32,read-only,,current,,if non zero this MAC is part of this VLAN.
.1.3.6.1.4.1.3181.10.6.1.86.105,G6-MAC-MIB::currentlyAuthorizedMacsTable,,not-accessible,,current,,This table lists all MAC addresses currently authorized via port access control.
.1.3.6.1.4.1.3181.10.6.1.86.105.1,G6-MAC-MIB::currentlyAuthorizedMacsEntry,,not-accessible,currentlyAuthorizedMacsIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.86.105.1.1,G6-MAC-MIB::currentlyAuthorizedMacsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.86.105.1.2,G6-MAC-MIB::currentlyAuthorizedMacsMac,OCTET,read-only,,current,,MAC address entry
.1.3.6.1.4.1.3181.10.6.1.86.105.1.3,G6-MAC-MIB::currentlyAuthorizedMacsPort,Integer32,read-only,,current,,Port number for MAC address
.1.3.6.1.4.1.3181.10.6.1.86.105.1.4,G6-MAC-MIB::currentlyAuthorizedMacsState,INTEGER,read-only,,current,unused(0):other(1):invalid(2):learned(3):self(4):pacc(5):multicast(6),Entry state indicates further details.
.1.3.6.1.4.1.3181.10.6.1.86.105.1.5,G6-MAC-MIB::currentlyAuthorizedMacsVlan,Integer32,read-only,,current,,if non zero this MAC is part of this VLAN.
.1.3.6.1.4.1.3181.10.6.1.86.105.1.6,G6-MAC-MIB::currentlyAuthorizedMacsDatabase,Integer32,read-only,,current,,Internal database index
.1.3.6.1.4.1.3181.10.6.1.94,G6-MSP1000-MIB::msp1000,,,,,,
.1.3.6.1.4.1.3181.10.6.1.94.1,G6-MSP1000-MIB::systemConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.1.1,G6-MSP1000-MIB::systemConfigEntry,,not-accessible,systemConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.1.1.1,G6-MSP1000-MIB::systemConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.1.1.2,G6-MSP1000-MIB::systemConfigNmsOperationMode,INTEGER,read-write,,current,passive(0):active(1),Read and learn in PASSIVE mode or ACTIVE mode forcing configuration upon the other modules.
.1.3.6.1.4.1.3181.10.6.1.94.1.1.3,G6-MSP1000-MIB::systemConfigCoreMode,INTEGER,read-write,,current,v1(0):v2(1),Use V2 unless used with an older system running in V1 mode. Only change when instructed.
.1.3.6.1.4.1.3181.10.6.1.94.1.1.4,G6-MSP1000-MIB::systemConfigNodeId,Unsigned32,read-write,,current,,Node Id used when NMS is used in combination with SEEmiles V5 management software. When in doubt use default node id 60000.
.1.3.6.1.4.1.3181.10.6.1.94.1.1.5,G6-MSP1000-MIB::systemConfigDisableLegacyAccess,INTEGER,read-write,,current,disabled(0):enabled(1),When set network access via SEEmiles is no longer possible.
.1.3.6.1.4.1.3181.10.6.1.94.2,G6-MSP1000-MIB::slotConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.2.1,G6-MSP1000-MIB::slotConfigEntry,,not-accessible,slotConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.2.1.1,G6-MSP1000-MIB::slotConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.2.1.2,G6-MSP1000-MIB::slotConfigModule,INTEGER,read-write,,current,undefined(0):empty(1):legacy(2):passive(3):x2g(61):txg(63):cxg(87):t4g(62):em2(105):em3(109):om1(104):lp1(106):os1(72):m2g(56):cxgp(88):nm1(65):nm2(66):nm3(108):nm3p(110):xcm1(60):tdm4(50):wcm2(57):fc8Filter(10):fc8aFilter(11):fc8xFilter(12):b4sFilter(13):b4xFilter(14):b8mFilter(15):b8dFilter(16):fd4Filter(17):dc1Filter(18):se1(19),Defines which module is expected to be placed in this slot. This should be identical to the actual hardware. The value may be set prior to actual roll-out to preconfigure the system.
.1.3.6.1.4.1.3181.10.6.1.94.2.1.3,G6-MSP1000-MIB::slotConfigSparepartMode,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the module is operating normally but will not generate any alarms. This is useful for modules that are inserted but only used as spare and are not properly connected at this time. This way unnecassary alarms are avoided.
.1.3.6.1.4.1.3181.10.6.1.94.2.1.4,G6-MSP1000-MIB::slotConfigPort1Alias,OCTET,read-write,,current,,User defined port name for easier reference.
.1.3.6.1.4.1.3181.10.6.1.94.2.1.5,G6-MSP1000-MIB::slotConfigPort2Alias,OCTET,read-write,,current,,User defined port name for easier reference.
.1.3.6.1.4.1.3181.10.6.1.94.2.1.6,G6-MSP1000-MIB::slotConfigPort3Alias,OCTET,read-write,,current,,User defined port name for easier reference.
.1.3.6.1.4.1.3181.10.6.1.94.2.1.7,G6-MSP1000-MIB::slotConfigPort4Alias,OCTET,read-write,,current,,User defined port name for easier reference.
.1.3.6.1.4.1.3181.10.6.1.94.3,G6-MSP1000-MIB::x2gConfigTable,,not-accessible,,current,,This table is used to define any X2G or OFX-3 modules in the system.
.1.3.6.1.4.1.3181.10.6.1.94.3.1,G6-MSP1000-MIB::x2gConfigEntry,,not-accessible,x2gConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.3.1.1,G6-MSP1000-MIB::x2gConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.3.1.2,G6-MSP1000-MIB::x2gConfigPort1Datarate,INTEGER,read-write,,current,transparent(0):ms100mEth(2):ms1gEth(8):ms1xFc(7):ms2xFc(10):oc3(3):oc12(6):oc48(11):otu1(13):fix100(1):escon(4):sdi(5):hdtv(9):m2g(12),This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.3,G6-MSP1000-MIB::x2gConfigPort2Datarate,INTEGER,read-write,,current,transparent(0):ms100mEth(2):ms1gEth(8):ms1xFc(7):ms2xFc(10):oc3(3):oc12(6):oc48(11):otu1(13):fix100(1):escon(4):sdi(5):hdtv(9):m2g(12),This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.4,G6-MSP1000-MIB::x2gConfigPort3Datarate,INTEGER,read-write,,current,transparent(0):ms100mEth(2):ms1gEth(8):ms1xFc(7):ms2xFc(10):oc3(3):oc12(6):oc48(11):otu1(13):fix100(1):escon(4):sdi(5):hdtv(9):m2g(12),This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.5,G6-MSP1000-MIB::x2gConfigPort4Datarate,INTEGER,read-write,,current,transparent(0):ms100mEth(2):ms1gEth(8):ms1xFc(7):ms2xFc(10):oc3(3):oc12(6):oc48(11):otu1(13):fix100(1):escon(4):sdi(5):hdtv(9):m2g(12),This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.6,G6-MSP1000-MIB::x2gConfigCrossConnect,INTEGER,read-write,,current,disconnect(0):normal(20):alternate(1):backup(5):ringBackupWest(9):ringBackupEast(15):multicast(11):dropContinue(12):addDropWest(13):addDropEast(14):crossOver(16):switchP1P2(17):switchP1P3(18):switchP1P4(19):bertPort4(21),This parameter defines the data path through the module. It is also used to setup a permanent bit error rate test.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.7,G6-MSP1000-MIB::x2gConfigDeactivatePort1,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.8,G6-MSP1000-MIB::x2gConfigDeactivatePort2,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.9,G6-MSP1000-MIB::x2gConfigDeactivatePort3,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.10,G6-MSP1000-MIB::x2gConfigDeactivatePort4,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.11,G6-MSP1000-MIB::x2gConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.12,G6-MSP1000-MIB::x2gConfigLossOfSignalHandling,INTEGER,read-write,,current,local(0):percolate(1),When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the currently associated port.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.13,G6-MSP1000-MIB::x2gConfigOptimizedFor8b10b,INTEGER,read-write,,current,disabled(0):enabled(1),Enable this feature when Ethernet or FibreChannel is used. Do not set when SDH is used on any port.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.14,G6-MSP1000-MIB::x2gConfigBertPattern,INTEGER,read-write,,current,ms27(0):ms223(2):ms231(3):cjPat(4):crPat(5):ms8b10bCnt(6),Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.15,G6-MSP1000-MIB::x2gConfigSfpDeltaInterval,INTEGER,read-write,,current,disabled(0):ms1Sec(1):ms5Sec(2):ms10Sec(3):ms30Sec(4):ms60Sec(5):ms240Sec(6),This enables and defines the interval in which the optical receive power level of each SFP is read and compared to previous value.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.16,G6-MSP1000-MIB::x2gConfigSfpDeltaThreshold,INTEGER,read-write,,current,ms05Db(0):ms1Db(1):ms15Db(2):ms2Db(3):ms3Db(4):ms5Db(5),This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.17,G6-MSP1000-MIB::x2gConfigBackupTrigger,INTEGER,read-write,,current,disabled(0):signalLoss(1):clockLoss(2),Defines under which optical signal condition an automated backup is initiated.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.18,G6-MSP1000-MIB::x2gConfigStayWithLastLink,INTEGER,read-write,,current,disabled(0):enabled(1),When set the backup switch remains in last position even when signal returns. Still the backup warning turns off after the delay set under backup_end parameter expires.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.19,G6-MSP1000-MIB::x2gConfigBackupEnd,INTEGER,read-write,,current,noDelay(0):ms15Seconds(1):ms15Minutes(2):manually(3),Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated.
.1.3.6.1.4.1.3181.10.6.1.94.3.1.20,G6-MSP1000-MIB::x2gConfigPermitLinkOverride,INTEGER,read-write,,current,disabled(0):enabled(1),Permits the manual selection of a failed link using the link selection. Defaults to false to safeguard against accidential link selection which would result in loss of connection.
.1.3.6.1.4.1.3181.10.6.1.94.4,G6-MSP1000-MIB::txgConfigTable,,not-accessible,,current,,This table is used to define any TXG or XCM-2 modules in the system.
.1.3.6.1.4.1.3181.10.6.1.94.4.1,G6-MSP1000-MIB::txgConfigEntry,,not-accessible,txgConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.4.1.1,G6-MSP1000-MIB::txgConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.4.1.2,G6-MSP1000-MIB::txgConfigTxgDatarate,INTEGER,read-write,,current,oc192(1):oc192Fec(3):ms10gEth(2):ms10xFc(5):otu2(4):otu1f(7):otu2e(6):otu2f(8),This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.3,G6-MSP1000-MIB::txgConfigTxgOperationMode,INTEGER,read-write,,current,disabled(0):transponder(2):repeater(3):bertPort1(4):bertPort2(5),This parameter defines the data path through the module when an internal cross connect is avalable. It is also used to setup a permanent bit error rate test. (most settings apply to X2G, TXG, OFX-3, XCM-2 only)
.1.3.6.1.4.1.3181.10.6.1.94.4.1.4,G6-MSP1000-MIB::txgConfigPort1ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.4.1.5,G6-MSP1000-MIB::txgConfigPort2ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.4.1.6,G6-MSP1000-MIB::txgConfigDeactivatePort1,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.7,G6-MSP1000-MIB::txgConfigDeactivatePort2,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.8,G6-MSP1000-MIB::txgConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.9,G6-MSP1000-MIB::txgConfigLossOfSignalHandling,INTEGER,read-write,,current,local(0):percolate(1),When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.10,G6-MSP1000-MIB::txgConfigBertPattern,INTEGER,read-write,,current,ms27(0):ms223(2):ms231(3):cjPat(4):crPat(5):ms8b10bCnt(6),Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.11,G6-MSP1000-MIB::txgConfigSfpDeltaInterval,INTEGER,read-write,,current,disabled(0):ms1Sec(1):ms5Sec(2):ms10Sec(3):ms30Sec(4):ms60Sec(5):ms240Sec(6),This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.
.1.3.6.1.4.1.3181.10.6.1.94.4.1.12,G6-MSP1000-MIB::txgConfigSfpDeltaThreshold,INTEGER,read-write,,current,ms05Db(0):ms1Db(1):ms15Db(2):ms2Db(3):ms3Db(4):ms5Db(5),This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.
.1.3.6.1.4.1.3181.10.6.1.94.5,G6-MSP1000-MIB::cxgPlusConfigTable,,not-accessible,,current,,This table is used to define any CXG+ or OFC-10 modules in the system.
.1.3.6.1.4.1.3181.10.6.1.94.5.1,G6-MSP1000-MIB::cxgPlusConfigEntry,,not-accessible,cxgPlusConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.5.1.1,G6-MSP1000-MIB::cxgPlusConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.5.1.2,G6-MSP1000-MIB::cxgPlusConfigCxgPort12Datarate,INTEGER,read-write,,current,transparent(0):ms8xFc(1):ms10gEth(2):ms10xFc16xFc(3),The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is provided. Both ports must operate at the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.3,G6-MSP1000-MIB::cxgPlusConfigCxgPort34Datarate,INTEGER,read-write,,current,transparent(0):ms8xFc(1):ms10gEth(2):ms10xFc16xFc(3),The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is provided. Both ports must operate at the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.4,G6-MSP1000-MIB::cxgPlusConfigPort1ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.5.1.5,G6-MSP1000-MIB::cxgPlusConfigPort2ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.5.1.6,G6-MSP1000-MIB::cxgPlusConfigPort3ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.5.1.7,G6-MSP1000-MIB::cxgPlusConfigPort4ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.5.1.8,G6-MSP1000-MIB::cxgPlusConfigDeactivatePort1,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.9,G6-MSP1000-MIB::cxgPlusConfigDeactivatePort2,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.10,G6-MSP1000-MIB::cxgPlusConfigDeactivatePort3,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.11,G6-MSP1000-MIB::cxgPlusConfigDeactivatePort4,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.12,G6-MSP1000-MIB::cxgPlusConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.13,G6-MSP1000-MIB::cxgPlusConfigLossOfSignalHandling,INTEGER,read-write,,current,local(0):percolate(1),When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.14,G6-MSP1000-MIB::cxgPlusConfigSfpDeltaInterval,INTEGER,read-write,,current,disabled(0):ms1Sec(1):ms5Sec(2):ms10Sec(3):ms30Sec(4):ms60Sec(5):ms240Sec(6),This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.
.1.3.6.1.4.1.3181.10.6.1.94.5.1.15,G6-MSP1000-MIB::cxgPlusConfigSfpDeltaThreshold,INTEGER,read-write,,current,ms05Db(0):ms1Db(1):ms15Db(2):ms2Db(3):ms3Db(4):ms5Db(5),This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.
.1.3.6.1.4.1.3181.10.6.1.94.6,G6-MSP1000-MIB::cxgConfigTable,,not-accessible,,current,,This table is used to define any CXG or XCM-3 modules in the system.
.1.3.6.1.4.1.3181.10.6.1.94.6.1,G6-MSP1000-MIB::cxgConfigEntry,,not-accessible,cxgConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.6.1.1,G6-MSP1000-MIB::cxgConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.6.1.2,G6-MSP1000-MIB::cxgConfigCxgPort12Datarate,INTEGER,read-write,,current,transparent(0):ms8xFc(1):ms10gEth(2):ms10xFc16xFc(3),The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is provided. Both ports must operate at the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.6.1.3,G6-MSP1000-MIB::cxgConfigPort1ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.6.1.4,G6-MSP1000-MIB::cxgConfigPort2ItuChannel,INTEGER,read-write,,current,fixed(0):ch11(22):ch12(24):ch13(26):ch14(28):ch15(30):ch16(32):ch17(34):ch18(36):ch19(38):ch20(40):ch21(42):ch22(44):ch23(46):ch24(48):ch25(50):ch26(52):ch27(54):ch28(56):ch29(58):ch30(60):ch31(62):ch32(64):ch33(66):ch34(68):ch35(70):ch36(72):ch37(74):ch38(76):ch39(78):ch40(80):ch41(82):ch42(84):ch43(86):ch44(88):ch45(90):ch46(92):ch47(94):ch48(96):ch49(98):ch50(100):ch51(102):ch52(104):ch53(106):ch54(108):ch55(110):ch56(112):ch57(114):ch58(116):ch59(118):ch60(120):ch61(122):ch62(124):ch63(126),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.6.1.5,G6-MSP1000-MIB::cxgConfigDeactivatePort1,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.6.1.6,G6-MSP1000-MIB::cxgConfigDeactivatePort2,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.6.1.7,G6-MSP1000-MIB::cxgConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.6.1.8,G6-MSP1000-MIB::cxgConfigLossOfSignalHandling,INTEGER,read-write,,current,local(0):percolate(1),When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.
.1.3.6.1.4.1.3181.10.6.1.94.6.1.9,G6-MSP1000-MIB::cxgConfigSfpDeltaInterval,INTEGER,read-write,,current,disabled(0):ms1Sec(1):ms5Sec(2):ms10Sec(3):ms30Sec(4):ms60Sec(5):ms240Sec(6),This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.
.1.3.6.1.4.1.3181.10.6.1.94.6.1.10,G6-MSP1000-MIB::cxgConfigSfpDeltaThreshold,INTEGER,read-write,,current,ms05Db(0):ms1Db(1):ms15Db(2):ms2Db(3):ms3Db(4):ms5Db(5),This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.
.1.3.6.1.4.1.3181.10.6.1.94.7,G6-MSP1000-MIB::t4gConfigTable,,not-accessible,,current,,This table is used to define any T4G or OFC-4 modules in the system.
.1.3.6.1.4.1.3181.10.6.1.94.7.1,G6-MSP1000-MIB::t4gConfigEntry,,not-accessible,t4gConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.7.1.1,G6-MSP1000-MIB::t4gConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.7.1.2,G6-MSP1000-MIB::t4gConfigT4gPort12Datarate,INTEGER,read-write,,current,transparent(0):ms100mEth(2):ms1gEth(8):escon(4):ms1xFc(7):ms2xFc(10):ms4xFc(14):infiniband(12):oc3(3):oc12(6):oc48(11),The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is provided. Both ports must operate at the same rate.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.3,G6-MSP1000-MIB::t4gConfigT4gPort34Datarate,INTEGER,read-write,,current,transparent(0):ms100mEth(2):ms1gEth(8):escon(4):ms1xFc(7):ms2xFc(10):ms4xFc(14):infiniband(12):oc3(3):oc12(6):oc48(11),Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received. 
.1.3.6.1.4.1.3181.10.6.1.94.7.1.4,G6-MSP1000-MIB::t4gConfigT4gOperationMode,INTEGER,read-write,,current,disabled(0):transponder(1):bertPort4(2),This parameter defines the data path through the module when an internal cross connect is avalable. It is also used to setup a permanent bit error rate test. (most settings apply to X2G, TXG, OFX-3, XCM-2 only)
.1.3.6.1.4.1.3181.10.6.1.94.7.1.5,G6-MSP1000-MIB::t4gConfigDeactivatePort1,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.6,G6-MSP1000-MIB::t4gConfigDeactivatePort2,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.7,G6-MSP1000-MIB::t4gConfigDeactivatePort3,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.8,G6-MSP1000-MIB::t4gConfigDeactivatePort4,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, the optical interface is disabled and communication is cut.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.9,G6-MSP1000-MIB::t4gConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.10,G6-MSP1000-MIB::t4gConfigLossOfSignalHandling,INTEGER,read-write,,current,local(0):percolate(1),When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.11,G6-MSP1000-MIB::t4gConfigBertPattern,INTEGER,read-write,,current,ms27(0):ms223(2):ms231(3):cjPat(4):crPat(5):ms8b10bCnt(6),Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.12,G6-MSP1000-MIB::t4gConfigSfpDeltaInterval,INTEGER,read-write,,current,disabled(0):ms1Sec(1):ms5Sec(2):ms10Sec(3):ms30Sec(4):ms60Sec(5):ms240Sec(6),This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.
.1.3.6.1.4.1.3181.10.6.1.94.7.1.13,G6-MSP1000-MIB::t4gConfigSfpDeltaThreshold,INTEGER,read-write,,current,ms05Db(0):ms1Db(1):ms15Db(2):ms2Db(3):ms3Db(4):ms5Db(5),This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.
.1.3.6.1.4.1.3181.10.6.1.94.8,G6-MSP1000-MIB::m2gConfigTable,,not-accessible,,current,,This table is used to define any M2G or TDM-2 modules in the system.
.1.3.6.1.4.1.3181.10.6.1.94.8.1,G6-MSP1000-MIB::m2gConfigEntry,,not-accessible,m2gConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.8.1.1,G6-MSP1000-MIB::m2gConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.8.1.2,G6-MSP1000-MIB::m2gConfigChannel1Datarate,INTEGER,read-write,,current,disabled(0):ms1gEth(1):ms1xFc(2),Devices the datarate of the first TDM channel (port 1)
.1.3.6.1.4.1.3181.10.6.1.94.8.1.3,G6-MSP1000-MIB::m2gConfigChannel2Datarate,INTEGER,read-write,,current,disabled(0):ms1gEth(1):ms1xFc(2),Devices the datarate of the second TDM channel (port 2)
.1.3.6.1.4.1.3181.10.6.1.94.8.1.4,G6-MSP1000-MIB::m2gConfigPort1CopperSfp,INTEGER,read-write,,current,disabled(0):enabled(1),Set when local copper RJ45 SFP is used and connection cannot be established.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.5,G6-MSP1000-MIB::m2gConfigPort2CopperSfp,INTEGER,read-write,,current,disabled(0):enabled(1),Set when local copper RJ45 SFP is used and connection cannot be established.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.6,G6-MSP1000-MIB::m2gConfigSfpDeltaInterval,INTEGER,read-write,,current,disabled(0):ms1Sec(1):ms5Sec(2):ms10Sec(3):ms30Sec(4):ms60Sec(5):ms240Sec(6),This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.7,G6-MSP1000-MIB::m2gConfigSfpDeltaThreshold,INTEGER,read-write,,current,ms05Db(0):ms1Db(1):ms15Db(2):ms2Db(3):ms3Db(4):ms5Db(5),This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.8,G6-MSP1000-MIB::m2gConfigLinkBackupTrigger,INTEGER,read-write,,current,disabled(0):signalLoss(1):errorBurst(2),Defines under which optical signal condition an automated backup is initiated.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.9,G6-MSP1000-MIB::m2gConfigStayWithLastLink,INTEGER,read-write,,current,disabled(0):enabled(1),When set the backup switch remains in last position even when signal returns. Still the backup warning turns off after the delay set under backup_end parameter expires.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.10,G6-MSP1000-MIB::m2gConfigBackupEnd,INTEGER,read-write,,current,noDelay(0):ms15Seconds(1):ms15Minutes(2):manually(3),Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated.
.1.3.6.1.4.1.3181.10.6.1.94.8.1.11,G6-MSP1000-MIB::m2gConfigPermitLinkOverride,INTEGER,read-write,,current,disabled(0):enabled(1),Permits the manual selection of a failed link using the link selection. Defaults to false to safeguard against accidential link selection which would result in loss of connection.
.1.3.6.1.4.1.3181.10.6.1.94.9,G6-MSP1000-MIB::om1ConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.9.1,G6-MSP1000-MIB::om1ConfigEntry,,not-accessible,om1ConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.9.1.1,G6-MSP1000-MIB::om1ConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.9.1.2,G6-MSP1000-MIB::om1ConfigWavelengthPortA,INTEGER,read-write,,current,ms1550nm(0):ms1310nm(1):disabled(3),Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.
.1.3.6.1.4.1.3181.10.6.1.94.9.1.3,G6-MSP1000-MIB::om1ConfigLowThresholdPortA,OCTET,read-write,,current,,Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.9.1.4,G6-MSP1000-MIB::om1ConfigHighThresholdPortA,OCTET,read-write,,current,,Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.9.1.5,G6-MSP1000-MIB::om1ConfigWavelengthPortB,INTEGER,read-write,,current,ms1550nm(0):ms1310nm(1):disabled(3),Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.
.1.3.6.1.4.1.3181.10.6.1.94.9.1.6,G6-MSP1000-MIB::om1ConfigLowThresholdPortB,OCTET,read-write,,current,,Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.9.1.7,G6-MSP1000-MIB::om1ConfigHighThresholdPortB,OCTET,read-write,,current,,Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.9.1.8,G6-MSP1000-MIB::om1ConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.10,G6-MSP1000-MIB::lp1ConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.10.1,G6-MSP1000-MIB::lp1ConfigEntry,,not-accessible,lp1ConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.10.1.1,G6-MSP1000-MIB::lp1ConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.10.1.2,G6-MSP1000-MIB::lp1ConfigWavelengthPortA,INTEGER,read-write,,current,ms1550nm(0):ms1310nm(1):disabled(3),Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.3,G6-MSP1000-MIB::lp1ConfigLowThresholdPortA,OCTET,read-write,,current,,Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event and a backup when configured.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.4,G6-MSP1000-MIB::lp1ConfigHighThresholdPortA,OCTET,read-write,,current,,Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event and a backup when configured.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.5,G6-MSP1000-MIB::lp1ConfigWavelengthPortB,INTEGER,read-write,,current,ms1550nm(0):ms1310nm(1):disabled(3),Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.6,G6-MSP1000-MIB::lp1ConfigLowThresholdPortB,OCTET,read-write,,current,,Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event and a backup when configured.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.7,G6-MSP1000-MIB::lp1ConfigHighThresholdPortB,OCTET,read-write,,current,,Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event and a backup when configured.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.8,G6-MSP1000-MIB::lp1ConfigBackupCriteria,INTEGER,read-write,,current,signalLow(0):signalHigh(1):manually(2),Defines under which optical signal condition an automated backup is initiated.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.9,G6-MSP1000-MIB::lp1ConfigStayWithLastLink,INTEGER,read-write,,current,disabled(0):enabled(1),When set the backup switch remains in last position even when signal return. Still the backup warning turns off after the delay set under backup_end parameter expires.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.10,G6-MSP1000-MIB::lp1ConfigBackupEnd,INTEGER,read-write,,current,noDelay(0):ms15Seconds(1):ms15Minutes(2):manually(3),Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated.
.1.3.6.1.4.1.3181.10.6.1.94.10.1.11,G6-MSP1000-MIB::lp1ConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.11,G6-MSP1000-MIB::emConfigTable,,not-accessible,,current,,Configuration for EDFA amplifier modules EM2 and EM3.
.1.3.6.1.4.1.3181.10.6.1.94.11.1,G6-MSP1000-MIB::emConfigEntry,,not-accessible,emConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.11.1.1,G6-MSP1000-MIB::emConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.11.1.2,G6-MSP1000-MIB::emConfigEdfaOperationMode,INTEGER,read-write,,current,pumpDisabled(3):preAmp(0):booster(1),Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.3,G6-MSP1000-MIB::emConfigLossOfSignalHandling,INTEGER,read-write,,current,local(0):percolate(1),Defines if loss of input signal turns off the EDFA pump (PERCOLATE) or not (LOCAL)
.1.3.6.1.4.1.3181.10.6.1.94.11.1.4,G6-MSP1000-MIB::emConfigSignalGain,OCTET,read-write,,current,,Desired signal gain in dB.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.5,G6-MSP1000-MIB::emConfigMaxOutputPower,OCTET,read-write,,current,,Maximum output power permitted to exit the module.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.6,G6-MSP1000-MIB::emConfigLowThresholdEdfaIn,OCTET,read-write,,current,,This corresponds to the unamplified input signal before entering the EDFA section. Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.7,G6-MSP1000-MIB::emConfigHighThresholdEdfaIn,OCTET,read-write,,current,,This corresponds to the unamplified input signal before entering the EDFA section. Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.8,G6-MSP1000-MIB::emConfigLowThresholdPortB,OCTET,read-write,,current,,Port B is the unamplified return path through the module. Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.9,G6-MSP1000-MIB::emConfigHighThresholdPortB,OCTET,read-write,,current,,Port B is the unamplified return path through the module. Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.
.1.3.6.1.4.1.3181.10.6.1.94.11.1.10,G6-MSP1000-MIB::emConfigFrontPanelMode,INTEGER,read-write,,current,normal(0):extended(1):normalLocked(4):extendedLocked(5):remote(7),Determines what is displayed on the front panel, when available. Also controls the modules local buttons.
.1.3.6.1.4.1.3181.10.6.1.94.12,G6-MSP1000-MIB::moduleControlTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.12.1,G6-MSP1000-MIB::moduleControlEntry,,not-accessible,moduleControlIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.12.1.1,G6-MSP1000-MIB::moduleControlIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.12.1.2,G6-MSP1000-MIB::moduleControlEnterPassword,OCTET,read-write,,current,,This command will set the module password. Only required when the nms_operation_mode is set to passive mode. Enter the password before configuration or actions can be accepted by the module.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.3,G6-MSP1000-MIB::moduleControlRebootModule,OCTET,read-write,,current,,This command will restart the module. All communication will be disrupted! Syntax: reboot_module = CONFIRM.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.4,G6-MSP1000-MIB::moduleControlWarmStart,OCTET,read-write,,current,,This command will warm start the module. Communication shall not be disrupted. (Firmware dependend) Syntax: warm_start = CONFIRM.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.5,G6-MSP1000-MIB::moduleControlClearCounter,OCTET,read-write,,current,,This command will clear all module and port related statistics counter.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.6,G6-MSP1000-MIB::moduleControlSwitchOffBackup,OCTET,read-write,,current,,For a module that supports backup and which currently is in backup condition this command will revert to normal operation. If this would disrupt traffic a warning is returned and nothing is executed. To override this warning and switch back nonetheless type switch_off_backup = CONFIRM
.1.3.6.1.4.1.3181.10.6.1.94.12.1.7,G6-MSP1000-MIB::moduleControlSwitchToBackup,OCTET,read-write,,current,,For a module that supports backup this command will switch to the backup link. If this would disrupt traffic because backup link is not available a warning is returned and nothing is executed. To override this warning and switch over nonetheless type switch_to_backup = CONFIRM
.1.3.6.1.4.1.3181.10.6.1.94.12.1.8,G6-MSP1000-MIB::moduleControlAutomaticBackup,OCTET,read-write,,current,,This command returns a manually overridden backup module to normal automatic mode. No parameter are required.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.9,G6-MSP1000-MIB::moduleControlWriteDisplay,OCTET,read-write,,current,,Writes to the front panel display of the module. Only for modules that offer a front panel display.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.10,G6-MSP1000-MIB::moduleControlLedTest,OCTET,read-write,,current,,This will start the modules LED test and will return the LED back up automatic mode after a few seconds. May be also be used to identify a certain module.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.11,G6-MSP1000-MIB::moduleControlLoopOff,OCTET,read-write,,current,,Turns all loops off
.1.3.6.1.4.1.3181.10.6.1.94.12.1.12,G6-MSP1000-MIB::moduleControlLoopPort1,OCTET,read-write,,current,,Tries to engage a loop at port 1. Note not all modules support loops. View port status to check success.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.13,G6-MSP1000-MIB::moduleControlLoopPort2,OCTET,read-write,,current,,Tries to engage a loop at port 2. Note not all modules support loops. View port status to check success.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.14,G6-MSP1000-MIB::moduleControlLoopPort3,OCTET,read-write,,current,,Tries to engage a loop at port 3. Note not all modules support loops. View port status to check success.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.15,G6-MSP1000-MIB::moduleControlLoopPort4,OCTET,read-write,,current,,Tries to engage a loop at port 4. Note not all modules support loops. View port status to check success.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.16,G6-MSP1000-MIB::moduleControlBertRestart,OCTET,read-write,,current,,Resynchronizes BERT. Only has an effect if a BERT is available on the module and configured to be active.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.17,G6-MSP1000-MIB::moduleControlBertInsertError,OCTET,read-write,,current,,Inserts an error in the data pattern. This can be used to confirm that a BERT is actually operating. Only has an effect if a BERT is available on the module and configured to be active.
.1.3.6.1.4.1.3181.10.6.1.94.12.1.18,G6-MSP1000-MIB::moduleControlBertClearCounter,OCTET,read-write,,current,,Clears the BERT counter. Only has an effect if a BERT is available on the module and configured to be active.
.1.3.6.1.4.1.3181.10.6.1.94.100,G6-MSP1000-MIB::systemStatusTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.100.1,G6-MSP1000-MIB::systemStatusEntry,,not-accessible,systemStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.100.1.1,G6-MSP1000-MIB::systemStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.100.1.2,G6-MSP1000-MIB::systemStatusAnyErrorCondition,INTEGER,read-only,,current,false(0):true(1),True when any error condition is currently present in any module.
.1.3.6.1.4.1.3181.10.6.1.94.100.1.3,G6-MSP1000-MIB::systemStatusAnyTestMode,INTEGER,read-only,,current,false(0):true(1),True when any module is in loopback test or has a backup engaged.
.1.3.6.1.4.1.3181.10.6.1.94.100.1.4,G6-MSP1000-MIB::systemStatusAnySparePart,INTEGER,read-only,,current,false(0):true(1),True when any module is marked as spare part.
.1.3.6.1.4.1.3181.10.6.1.94.100.1.5,G6-MSP1000-MIB::systemStatusUsedNodeId,Unsigned32,read-only,,current,,Actually used node id as discovered from device
.1.3.6.1.4.1.3181.10.6.1.94.100.1.6,G6-MSP1000-MIB::systemStatusLocalRack,Unsigned32,read-only,,current,,Indicates in which rack the mangement module over which this information is retrieved is inserted.
.1.3.6.1.4.1.3181.10.6.1.94.100.1.7,G6-MSP1000-MIB::systemStatusLocalSlot,Unsigned32,read-only,,current,,Indicates in which slot the mangement module over which this information is retrieved is inserted.
.1.3.6.1.4.1.3181.10.6.1.94.101,G6-MSP1000-MIB::moduleInventoryTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.1.94.101.1,G6-MSP1000-MIB::moduleInventoryEntry,,not-accessible,moduleInventoryIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.101.1.1,G6-MSP1000-MIB::moduleInventoryIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.101.1.2,G6-MSP1000-MIB::moduleInventoryExpectedModule,OCTET,read-only,,current,,Name of module configured for this slot.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.3,G6-MSP1000-MIB::moduleInventoryModule,OCTET,read-only,,current,,Name of module actually discovered in this slot. This name should be equal to the above name otherwise configuration may not apply properly.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.4,G6-MSP1000-MIB::moduleInventoryType,INTEGER,read-only,,current,empty(0):unknown(1):transponder(2):measurement(3):amplifier(4):management(5):passive(6):occupied(7),General functional type of module inserted.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.5,G6-MSP1000-MIB::moduleInventoryBoardCode,Integer32,read-only,,current,,Internal code of actually inserted module.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.6,G6-MSP1000-MIB::moduleInventoryAdditionalInfo,OCTET,read-only,,current,,Additional information that may be saved in some modules during production.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.7,G6-MSP1000-MIB::moduleInventorySerialNumber,OCTET,read-only,,current,,Serial number as stored within the hardware.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.8,G6-MSP1000-MIB::moduleInventoryOccupiedSlots,Unsigned32,read-only,,current,,Number of slots taken by this module. Usually 1.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.9,G6-MSP1000-MIB::moduleInventoryProjectNumber,OCTET,read-only,,current,,Internal hardware project number
.1.3.6.1.4.1.3181.10.6.1.94.101.1.10,G6-MSP1000-MIB::moduleInventoryBuildVersion,OCTET,read-only,,current,,Precise build code for hardware version tracking.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.11,G6-MSP1000-MIB::moduleInventoryProductionDate,OCTET,read-only,,current,,Production data of the module
.1.3.6.1.4.1.3181.10.6.1.94.101.1.12,G6-MSP1000-MIB::moduleInventoryMfgTestInfo,OCTET,read-only,,current,, Internal information for quality management. Manufacturing Site / Test Site / Test Person
.1.3.6.1.4.1.3181.10.6.1.94.101.1.13,G6-MSP1000-MIB::moduleInventoryNumberOfOpticalPorts,Integer32,read-only,,current,,Indicates the number of actively monitored optical ports of this type of module.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.14,G6-MSP1000-MIB::moduleInventoryNumberOfSfpPorts,Integer32,read-only,,current,,Indicates the number of optical SFP or SFP+ ports of this type of module.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.15,G6-MSP1000-MIB::moduleInventoryNumberOfXfpPorts,Integer32,read-only,,current,,Indicates the number of optical XFP ports of this type of module.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.16,G6-MSP1000-MIB::moduleInventoryCoreFirmwareVersion,OCTET,read-only,,current,,Core operating system software version.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.17,G6-MSP1000-MIB::moduleInventoryCoreFirmwareDate,OCTET,read-only,,current,,Core operating system software creation date.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.18,G6-MSP1000-MIB::moduleInventoryApplFirmwareVersion,OCTET,read-only,,current,,Application software version.
.1.3.6.1.4.1.3181.10.6.1.94.101.1.19,G6-MSP1000-MIB::moduleInventoryApplFirmwareDate,OCTET,read-only,,current,,Application software creation date.
.1.3.6.1.4.1.3181.10.6.1.94.102,G6-MSP1000-MIB::moduleStatusTable,,not-accessible,,current,,This table holds a record for each module in the system. Note that not all modules deliver every kind of status.
.1.3.6.1.4.1.3181.10.6.1.94.102.1,G6-MSP1000-MIB::moduleStatusEntry,,not-accessible,moduleStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.102.1.1,G6-MSP1000-MIB::moduleStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.102.1.2,G6-MSP1000-MIB::moduleStatusModule,OCTET,read-only,,current,,Name of module actually discovered in this slot.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.3,G6-MSP1000-MIB::moduleStatusSystemOk,INTEGER,read-only,,current,false(0):true(1),True when the module has booted and appears ok.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.4,G6-MSP1000-MIB::moduleStatusErrorCondition,INTEGER,read-only,,current,false(0):true(1),True when any error condition is currently present.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.5,G6-MSP1000-MIB::moduleStatusTestMode,INTEGER,read-only,,current,false(0):true(1),True when module is in loopback test or a backup is engaged.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.6,G6-MSP1000-MIB::moduleStatusSparePart,INTEGER,read-only,,current,false(0):true(1),True when module is marked as spare part.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.7,G6-MSP1000-MIB::moduleStatusUptime,Counter32,read-only,,current,,Uptime since last reboot in seconds.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.8,G6-MSP1000-MIB::moduleStatusTimeSinceCounterReset,Counter32,read-only,,current,,How long ago have the statistics counter been restarted.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.9,G6-MSP1000-MIB::moduleStatusTemperature,Integer32,read-only,,current,,Temperature value in centigrade.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.10,G6-MSP1000-MIB::moduleStatusTooHot,INTEGER,read-only,,current,false(0):true(1),True when module is running too hot.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.11,G6-MSP1000-MIB::moduleStatusBackupState,BITS,read-only,,current,disrupted(0):backup(1):awaitSwitchback(2):manual(3),Indicates if a backup is active and in which state.
.1.3.6.1.4.1.3181.10.6.1.94.102.1.12,G6-MSP1000-MIB::moduleStatusBackupCounter,Unsigned32,read-only,,current,,Counts the number of times this module has initiated a backup (if backup feature is available for this module type).
.1.3.6.1.4.1.3181.10.6.1.94.102.1.13,G6-MSP1000-MIB::moduleStatusBackupDuration,Counter32,read-only,,current,,How long the backup has been activated in total since last value reset.
.1.3.6.1.4.1.3181.10.6.1.94.103,G6-MSP1000-MIB::portStatusTable,,not-accessible,,current,,This table holds a record for each optical port of the system. Note that not all modules deliver every kind of statistic.
.1.3.6.1.4.1.3181.10.6.1.94.103.1,G6-MSP1000-MIB::portStatusEntry,,not-accessible,portStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.103.1.1,G6-MSP1000-MIB::portStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.103.1.2,G6-MSP1000-MIB::portStatusModule,OCTET,read-only,,current,,Name of module in which this port is present.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.3,G6-MSP1000-MIB::portStatusLocation,OCTET,read-only,,current,,Textual description of port location.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.4,G6-MSP1000-MIB::portStatusSnmpPort,Unsigned32,read-only,,current,,Slot and port representation as used in SNMP. Formula is Slot*10000 + Port*10.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.5,G6-MSP1000-MIB::portStatusAlias,OCTET,read-only,,current,,Configured alias nickname of this port.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.6,G6-MSP1000-MIB::portStatusAdminStatus,INTEGER,read-only,,current,none(0):up(1):down(2):testing(3),Reflects the administrative setting of this port.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.7,G6-MSP1000-MIB::portStatusOperStatus,INTEGER,read-only,,current,none(0):up(1):down(2):testing(3),Indicates the combined operation port status.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.8,G6-MSP1000-MIB::portStatusDetailedStatus,BITS,read-only,,current,disabled(0):sfpMissing(1):pllNotLocked(2):signalLow(3):tooHigh(4):laserOff(5):loop(6):reserved(7):unknown(8):none(9),Indicates detailed issues related to the port.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.9,G6-MSP1000-MIB::portStatusPortDatarate,INTEGER,read-only,,current,none(0):txp(1):ms100mEth(2):ms1gEth(3):ms10gEth(4):ms1xFc(10):ms2xFc(11):ms4xFc(12):ms8xFc(13):ms10xFc(14):ms16xFc(15):oc3(20):oc12(21):oc48(22):oc192(23):otu1(30):otu1e(31):otu1f(32):otu2(33):otu2e(34):otu2f(35):fix100(40):escon(41):sdi(42):hdtv(43):tdm2(44):other(45),Reflects the data rate setting of this port.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.10,G6-MSP1000-MIB::portStatusUpdateTimeStamp,OCTET,read-only,,current,,Indicates the time when this record was last updated.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.11,G6-MSP1000-MIB::portStatusTimeSinceValueReset,Counter32,read-only,,current,,Time since when the following statistics have been accumulated. They restart upon module power up or on forced value reset.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.12,G6-MSP1000-MIB::portStatusTimeSinceLastError,Counter32,read-only,,current,,Time since last input signal loss or input signal too high.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.13,G6-MSP1000-MIB::portStatusTimeSignalTooLow,Counter32,read-only,,current,,Total time the input signal was below threshold.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.14,G6-MSP1000-MIB::portStatusSignalTooLowCounter,Unsigned32,read-only,,current,,Number of times a transition to signal too low has occured.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.15,G6-MSP1000-MIB::portStatusTimeSignalTooHigh,Counter32,read-only,,current,,Total time the input signal was above high threshold.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.16,G6-MSP1000-MIB::portStatusSignalTooHighCounter,Unsigned32,read-only,,current,,Number of times a transition to signal too high has occured.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.17,G6-MSP1000-MIB::portStatusLowThreshold,OCTET,read-only,,current,,Defined signal too low threshold.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.18,G6-MSP1000-MIB::portStatusCurrentInputSignal,OCTET,read-only,,current,,Actual current signal level.
.1.3.6.1.4.1.3181.10.6.1.94.103.1.19,G6-MSP1000-MIB::portStatusHighThreshold,OCTET,read-only,,current,,Defined signal too high threshold.
.1.3.6.1.4.1.3181.10.6.1.94.104,G6-MSP1000-MIB::emStatusTable,,not-accessible,,current,,Optical amplifier status
.1.3.6.1.4.1.3181.10.6.1.94.104.1,G6-MSP1000-MIB::emStatusEntry,,not-accessible,emStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.104.1.1,G6-MSP1000-MIB::emStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.104.1.2,G6-MSP1000-MIB::emStatusSystemOk,INTEGER,read-only,,current,false(0):true(1),True when no errors are present
.1.3.6.1.4.1.3181.10.6.1.94.104.1.3,G6-MSP1000-MIB::emStatusErrors,BITS,read-only,,current,lossOfInput(0):lossOfOutput(1):tooHot(2):eyeSafetyShutdown(3):backReflection(4):powerLimit(5):overCurrent(6):pumpDown(7),Indicates various optical error conditions.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.4,G6-MSP1000-MIB::emStatusHardwareCode,OCTET,read-only,,current,,Details codes about the installed hardware components.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.5,G6-MSP1000-MIB::emStatusTimeSincePowerError,Counter32,read-only,,current,,How long ago since the last time the output power was in error condition.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.6,G6-MSP1000-MIB::emStatusTimeWithPowerLoss,Counter32,read-only,,current,,Accumulated time the output power has been down.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.7,G6-MSP1000-MIB::emStatusInputSignalLowCounter,Unsigned32,read-only,,current,,Number of times a loss of signal has occured.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.8,G6-MSP1000-MIB::emStatusInputPower,OCTET,read-only,,current,,Optical input power of port A.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.9,G6-MSP1000-MIB::emStatusSignalGain,OCTET,read-only,,current,,Indicates how strong the input signal is amplified.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.10,G6-MSP1000-MIB::emStatusOptimalFlatGain,OCTET,read-only,,current,,Indicates the best gain setting for an even amplification accross the wavelength channels
.1.3.6.1.4.1.3181.10.6.1.94.104.1.11,G6-MSP1000-MIB::emStatusBackReflection,OCTET,read-only,,current,,The value should be low and indicates cable issues if not.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.12,G6-MSP1000-MIB::emStatusSignalOutputPower,OCTET,read-only,,current,,Indicated the actually achieved optical signal output power.
.1.3.6.1.4.1.3181.10.6.1.94.104.1.13,G6-MSP1000-MIB::emStatusTotalOutputPower,OCTET,read-only,,current,,Indicated the actually achieved optical output power leaving the module (including noise).
.1.3.6.1.4.1.3181.10.6.1.94.104.1.14,G6-MSP1000-MIB::emStatusMinOutputPower,OCTET,read-only,,current,,Indicates the minimum optical output level that must be send out
.1.3.6.1.4.1.3181.10.6.1.94.104.1.15,G6-MSP1000-MIB::emStatusMaxOutputPower,OCTET,read-only,,current,,Indicates the maximum optical output level that can be send out
.1.3.6.1.4.1.3181.10.6.1.94.104.1.16,G6-MSP1000-MIB::emStatusCfgOutputPower,OCTET,read-only,,current,,Indicated the desired configured optical output power
.1.3.6.1.4.1.3181.10.6.1.94.105,G6-MSP1000-MIB::bertStatusTable,,not-accessible,,current,,Displays the results of the bit error rate tester (BERT) if it is present and enabled in a slot
.1.3.6.1.4.1.3181.10.6.1.94.105.1,G6-MSP1000-MIB::bertStatusEntry,,not-accessible,bertStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.94.105.1.1,G6-MSP1000-MIB::bertStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.94.105.1.2,G6-MSP1000-MIB::bertStatusLocation,OCTET,read-only,,current,,Textual description of BERT port location.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.3,G6-MSP1000-MIB::bertStatusBertOperation,INTEGER,read-only,,current,unused(0):inSync(1):wasOutOfSync(2):outOfSync(3),Indicates the general bit error rate tester operational status.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.4,G6-MSP1000-MIB::bertStatusTotalErrors,Unsigned32,read-only,,current,,Number of errored bits. Only valid when BERT is synchronized.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.5,G6-MSP1000-MIB::bertStatusTimeSinceLastError,Counter32,read-only,,current,,Seconds elapsed since the last error was detected.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.6,G6-MSP1000-MIB::bertStatusTotalTestTime,Counter32,read-only,,current,,Accumulated time how long the test was run since last value clear.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.7,G6-MSP1000-MIB::bertStatusErroredTime,Counter32,read-only,,current,,Accumulated seconds in which at least on errored bit was detected.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.8,G6-MSP1000-MIB::bertStatusBitErrorRate,OCTET,read-only,,current,,Averaged bit error rate during test interval.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.9,G6-MSP1000-MIB::bertStatusBerSinceLastError,OCTET,read-only,,current,,Bit error rate since last error.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.10,G6-MSP1000-MIB::bertStatusTheoreticalBer,OCTET,read-only,,current,,Theoretical best possible error rate in the given time frame of the current test interval.
.1.3.6.1.4.1.3181.10.6.1.94.105.1.11,G6-MSP1000-MIB::bertStatusAvailability,OCTET,read-only,,current,,Relation of transmitted vs. Errored bits.
.1.3.6.1.4.1.3181.10.6.1.98,G6-WIFI-MIB::wifi,,,,,,
.1.3.6.1.4.1.3181.10.6.1.98.1,G6-WIFI-MIB::wifiEnableWifi,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enable the access point and its wireless interface.
.1.3.6.1.4.1.3181.10.6.1.98.2,G6-WIFI-MIB::accessPointTable,,not-accessible,,current,,Basic settings of the access point.
.1.3.6.1.4.1.3181.10.6.1.98.2.1,G6-WIFI-MIB::accessPointEntry,,not-accessible,accessPointIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.98.2.1.1,G6-WIFI-MIB::accessPointIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.98.2.1.2,G6-WIFI-MIB::accessPointHostname,OCTET,read-write,,current,,Access point hostname.
.1.3.6.1.4.1.3181.10.6.1.98.2.1.3,G6-WIFI-MIB::accessPointDeviceIp,OCTET,read-write,,current,,Static device IP address of the access point.
.1.3.6.1.4.1.3181.10.6.1.98.2.1.4,G6-WIFI-MIB::accessPointSubnetMask,OCTET,read-write,,current,,Static subnet mask.
.1.3.6.1.4.1.3181.10.6.1.98.2.1.5,G6-WIFI-MIB::accessPointGateway,OCTET,read-write,,current,,Default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
.1.3.6.1.4.1.3181.10.6.1.98.2.1.6,G6-WIFI-MIB::accessPointUpdateFirmware,OCTET,read-write,,current,,Update the access point firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.display_files to view a list of available files under the AP section.
.1.3.6.1.4.1.3181.10.6.1.98.2.1.7,G6-WIFI-MIB::accessPointReboot,OCTET,read-write,,current,,This command will restart the access point only. All wireless communication will be disrupted for about a minute! Syntax: reboot = CONFIRM.
.1.3.6.1.4.1.3181.10.6.1.98.3,G6-WIFI-MIB::interfaceTable,,not-accessible,,current,,This table defines the Ethernet interface available via Wifi
.1.3.6.1.4.1.3181.10.6.1.98.3.1,G6-WIFI-MIB::interfaceEntry,,not-accessible,interfaceIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.98.3.1.1,G6-WIFI-MIB::interfaceIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.98.3.1.2,G6-WIFI-MIB::interfaceCountryCode,OCTET,read-write,,current,,International country code. Use DE for Germany, FR for france, etc.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.3,G6-WIFI-MIB::interfaceSsid,OCTET,read-write,,current,,Defines the name under which the access point can be reached. This will be displayed as network name.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.4,G6-WIFI-MIB::interfaceEnterPresharedKey,OCTET,read-write,,current,,Enter the password required to access the network. No spaces are permitted and at least 8 character are required.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.5,G6-WIFI-MIB::interfaceEncryptedPresharedKey,OCTET,read-write,,current,,Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.6,G6-WIFI-MIB::interfaceExposeSsid,INTEGER,read-write,,current,hidden(0):visible(1),Defines whether the network can be detected or is hidden.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.7,G6-WIFI-MIB::interfaceEncryption,INTEGER,read-write,,current,none(0):wep(1):wpaPsk(2):wpaPsk2(3),
.1.3.6.1.4.1.3181.10.6.1.98.3.1.8,G6-WIFI-MIB::interfaceDhcpServer,INTEGER,read-write,,current,disabled(0):enabled(1),Enable DHCP server to automatically provide an IP address to the attached wifi devices.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.9,G6-WIFI-MIB::interfaceDhcpStartAddress,OCTET,read-write,,current,,Lowest address served.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.10,G6-WIFI-MIB::interfaceDhcpNumberOfAddresses,Integer32,read-write,,current,,The number of IP addresses served starting from the dhcp_start_address
.1.3.6.1.4.1.3181.10.6.1.98.3.1.11,G6-WIFI-MIB::interfaceChannelNumber,Unsigned32,read-write,,current,,Zero is automatic selection.
.1.3.6.1.4.1.3181.10.6.1.98.3.1.12,G6-WIFI-MIB::interfaceChannelWidth,INTEGER,read-write,,current,ht20(1):ht40p(2):ht40n(3),
.1.3.6.1.4.1.3181.10.6.1.98.4,G6-WIFI-MIB::firewallConfigTable,,not-accessible,,current,,Each entry of this variable table defines the details of one test case.
.1.3.6.1.4.1.3181.10.6.1.98.4.1,G6-WIFI-MIB::firewallConfigEntry,,not-accessible,firewallConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.98.4.1.1,G6-WIFI-MIB::firewallConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.98.4.1.2,G6-WIFI-MIB::firewallConfigEnableIngressFirewall,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled the ingress_firewall table is not in effect. This is intended for test purposes only.
.1.3.6.1.4.1.3181.10.6.1.98.4.1.3,G6-WIFI-MIB::firewallConfigEnableEgressFirewall,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled the ingress_firewall table is not in effect. This is intended for test purposes only.
.1.3.6.1.4.1.3181.10.6.1.98.4.1.4,G6-WIFI-MIB::firewallConfigDropInvalidPackets,INTEGER,read-write,,current,disabled(0):enabled(1),Drop invalid packets, not matching any active connection.
.1.3.6.1.4.1.3181.10.6.1.98.4.1.5,G6-WIFI-MIB::firewallConfigSynRateLimiting,Integer32,read-write,,current,,Defines how many SYN request are accepted per second. When the limit is reached, a SYN flooding attack is assumed and the port is protected. The value 0 disables the rate limit check.
.1.3.6.1.4.1.3181.10.6.1.98.4.1.6,G6-WIFI-MIB::firewallConfigUseSynCookies,INTEGER,read-write,,current,disabled(0):enabled(1),SYN cookie is a technique used to resist SYN flooding attacks.
.1.3.6.1.4.1.3181.10.6.1.98.4.1.7,G6-WIFI-MIB::firewallConfigTcpWindowScaling,INTEGER,read-write,,current,disabled(0):enabled(1),Enable TCP window scaling.
.1.3.6.1.4.1.3181.10.6.1.98.5,G6-WIFI-MIB::firewallRulesTable,,not-accessible,,current,,Firewall settings for traffic ingressing on the wifi interface.
.1.3.6.1.4.1.3181.10.6.1.98.5.1,G6-WIFI-MIB::firewallRulesEntry,,not-accessible,firewallRulesIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.98.5.1.1,G6-WIFI-MIB::firewallRulesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.98.5.1.2,G6-WIFI-MIB::firewallRulesIncomingAclList,OCTET,read-write,,current,,Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
.1.3.6.1.4.1.3181.10.6.1.98.5.1.3,G6-WIFI-MIB::firewallRulesIncomingAclDefault,INTEGER,read-write,,current,deny(0):permit(1),Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic.
.1.3.6.1.4.1.3181.10.6.1.98.5.1.4,G6-WIFI-MIB::firewallRulesOutgoingAclList,OCTET,read-write,,current,,Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
.1.3.6.1.4.1.3181.10.6.1.98.5.1.5,G6-WIFI-MIB::firewallRulesOutgoingAclDefault,INTEGER,read-write,,current,deny(0):permit(1),Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic.
.1.3.6.1.4.1.3181.10.6.1.98.100,G6-WIFI-MIB::statusTable,,not-accessible,,current,,Indicates basic WIFI releated status inormation
.1.3.6.1.4.1.3181.10.6.1.98.100.1,G6-WIFI-MIB::statusEntry,,not-accessible,statusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.98.100.1.1,G6-WIFI-MIB::statusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.98.100.1.2,G6-WIFI-MIB::statusOverallStatus,INTEGER,read-only,,current,notPresent(0):disabled(1):fault(2):operational(3),Indicates if WIFI module is operational.
.1.3.6.1.4.1.3181.10.6.1.98.100.1.3,G6-WIFI-MIB::statusNumberOfConnections,Unsigned32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.1.98.101,G6-WIFI-MIB::ipV4StatusTable,,not-accessible,,current,,This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
.1.3.6.1.4.1.3181.10.6.1.98.101.1,G6-WIFI-MIB::ipV4StatusEntry,,not-accessible,ipV4StatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.1.98.101.1.1,G6-WIFI-MIB::ipV4StatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.1.98.101.1.2,G6-WIFI-MIB::ipV4StatusDynamicDeviceIp,OCTET,read-only,,current,,Currently used access point IP address.
.1.3.6.1.4.1.3181.10.6.1.98.101.1.3,G6-WIFI-MIB::ipV4StatusDynamicSubnetMask,OCTET,read-only,,current,,Currently used access point subnet mask.
.1.3.6.1.4.1.3181.10.6.1.98.101.1.4,G6-WIFI-MIB::ipV4StatusDynamicGateway,OCTET,read-only,,current,,Currently used access point gateway IP address.
.1.3.6.1.4.1.3181.10.6.2,G6-DHCP-MIB::protocol,,,,,,Microsens private MIB for Generation 6 Ethernet Switches
.1.3.6.1.4.1.3181.10.6.2.40,G6-IGMP-MIB::igmp,,,,,,
.1.3.6.1.4.1.3181.10.6.2.40.1,G6-IGMP-MIB::igmpEnableIgmpSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of the IGMP snooping function. When disabled all IGMP snooping in all VLANs is disabled as well.
.1.3.6.1.4.1.3181.10.6.2.40.2,G6-IGMP-MIB::igmpEnableMldSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of the MLD snooping function. When disabled all MLD snooping in all VLANs is disabled as well.
.1.3.6.1.4.1.3181.10.6.2.40.3,G6-IGMP-MIB::igmpShowMulticastForVlan,OCTET,read-write,,current,,Filter MAC table to show only multicast MACs associated with a given VLAN range. Supply VLAN ID as parameter. Syntax example: igmp.show_multicast_for_vlan = 1-4,1000-2000.
.1.3.6.1.4.1.3181.10.6.2.40.4,G6-IGMP-MIB::igmpShowMulticastForPort,OCTET,read-write,,current,,Filter MAC table to show only multicast MACs associated with a given port range. Supply port as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: igmp.show_multicast_for_port = 1/2,1/5 or igmp.show_multicast_for_port = 1-3,5.
.1.3.6.1.4.1.3181.10.6.2.40.5,G6-IGMP-MIB::configTable,,not-accessible,,current,,This table defines IGMP snooping parameter per VLAN. The table entries are referenced by VLAN ID and must match corresponding VLAN filter entires defined under vlan.filter_config.vlan_id. Any number of table entires can be created to configure unique settings for different VLANs. The default entry for VLAN ID=0 cannot be deleted and it used when no VLAN are used in the system.
.1.3.6.1.4.1.3181.10.6.2.40.5.1,G6-IGMP-MIB::configEntry,,not-accessible,configIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.40.5.1.1,G6-IGMP-MIB::configIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.40.5.1.2,G6-IGMP-MIB::configVlanId,OCTET,read-write,,current,,Defines IGMP snooping table entry associated with this VLAN ID. This is the key value for the table.VLAN ID 0 is used to define the IGMP settings when VLANs are not used. Type '=:' to edit, use index '[*] = new_vlan:' to add an entry. Edit string to nothing to delete entry.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.3,G6-IGMP-MIB::configEnableIgmpSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),Enable IGMP (IPv4) snooping for this particular VLAN.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.4,G6-IGMP-MIB::configEnableMldSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),Enable MLD (IPv6) snooping for this particular VLAN.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.5,G6-IGMP-MIB::configSnoopingPorts,INTEGER,read-write,,current,,This parameter permits port selective IGMP/MLD snooping enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
.1.3.6.1.4.1.3181.10.6.2.40.5.1.6,G6-IGMP-MIB::configStaticRouterPorts,INTEGER,read-write,,current,,When set corresponding ports will be marked as static router ports. Upon default no ports will be marked. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0x30 (ports 5-6)
.1.3.6.1.4.1.3181.10.6.2.40.5.1.7,G6-IGMP-MIB::configMulticastRouterDetection,INTEGER,read-write,,current,routerDiscovery(0):queryMessage(1),Defines the mode for detecting the router port.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.8,G6-IGMP-MIB::configEnableReportAggregation,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled limits the number of reports received from same subnet to be transmitted only once to the router.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.9,G6-IGMP-MIB::configEnableFloodingUnregisterPkt,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled unregistered multicast streams are flooded on all ports (which are member of the source VLAN of this stream). When disabled unregistered multicast streams are forwarded on static router ports only.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.10,G6-IGMP-MIB::configMcastGroupLimit,Integer32,read-write,,current,,Indicates the number of multicast groups in the table.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.11,G6-IGMP-MIB::configGroupMembershipInterval,Integer32,read-write,,current,,IGMP group_membership_interval time in seconds.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.12,G6-IGMP-MIB::configMaxResponseTime,Integer32,read-write,,current,,IGMP response time in seconds.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.13,G6-IGMP-MIB::configEnableFastLeave,INTEGER,read-write,,current,disabled(0):enabled(1),Enables the software to remove the multicast group when it receives an IGMP leave report without first sending an IGMP query message to check if other users still require this group. This parameter is used for IGMPv2 hosts when only one host is present on each VLAN port.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.14,G6-IGMP-MIB::configLastMemberQueryTime,Integer32,read-write,,current,,Sets the interval in seconds that the software waits after sending an IGMP query to verify that no hosts that want to receive a particular multicast group to remain on a network segment. If no hosts respond before the last_member_query_time expires, the multicast group is removed from the associated VLAN port.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.15,G6-IGMP-MIB::configNeighborDeadInterval,Integer32,read-write,,current,,IGMP neighbor dead interval in seconds in case of router_discovery mode.
.1.3.6.1.4.1.3181.10.6.2.40.5.1.16,G6-IGMP-MIB::configRouterAgingTime,Integer32,read-write,,current,,IGMP router aging time in seconds.
.1.3.6.1.4.1.3181.10.6.2.40.6,G6-IGMP-MIB::staticMulticastGroupsTable,,not-accessible,,current,,This table may be used to enter the multicast addresses of other protocols beside IGMP, that need to be forwarded when IGMP snooping is enabled. This can be used instead of flood_unregistered_packets parameter and reduces the traffic in the network.
.1.3.6.1.4.1.3181.10.6.2.40.6.1,G6-IGMP-MIB::staticMulticastGroupsEntry,,not-accessible,staticMulticastGroupsIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.40.6.1.1,G6-IGMP-MIB::staticMulticastGroupsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.40.6.1.2,G6-IGMP-MIB::staticMulticastGroupsName,OCTET,read-write,,current,,Unique name to reference this entry and to remember whose MAC address is entered.
.1.3.6.1.4.1.3181.10.6.2.40.6.1.3,G6-IGMP-MIB::staticMulticastGroupsDescription,OCTET,read-write,,current,,Enter any information required to remember what this rule is intended to do.
.1.3.6.1.4.1.3181.10.6.2.40.6.1.4,G6-IGMP-MIB::staticMulticastGroupsMulticastMac,OCTET,read-write,,current,,MAC address entry.
.1.3.6.1.4.1.3181.10.6.2.40.6.1.5,G6-IGMP-MIB::staticMulticastGroupsForwardingPortMask,INTEGER,read-write,,current,,Enter the ports to which this multicast should be forwarded. A value of 0 disables this entry. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
.1.3.6.1.4.1.3181.10.6.2.40.6.1.6,G6-IGMP-MIB::staticMulticastGroupsVlanId,Integer32,read-write,,current,,VLAN on which the packets is entering.
.1.3.6.1.4.1.3181.10.6.2.40.100,G6-IGMP-MIB::statusTable,,not-accessible,,current,,This table contains operational counters of the IGMP snooping module.
.1.3.6.1.4.1.3181.10.6.2.40.100.1,G6-IGMP-MIB::statusEntry,,not-accessible,statusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.40.100.1.1,G6-IGMP-MIB::statusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.40.100.1.2,G6-IGMP-MIB::statusIgmpRouterPorts,INTEGER,read-only,,current,,Displays the igmp router ports list
.1.3.6.1.4.1.3181.10.6.2.40.100.1.3,G6-IGMP-MIB::statusRxGeneralQueries,Unsigned32,read-only,,current,,Displays the number of received general queries.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.4,G6-IGMP-MIB::statusRxGroupQueries,Unsigned32,read-only,,current,,Displays the number of received group queries.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.5,G6-IGMP-MIB::statusRxReports,Unsigned32,read-only,,current,,Displays the number of received report messages.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.6,G6-IGMP-MIB::statusRxLeaves,Unsigned32,read-only,,current,,Displays the number of received leave messages.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.7,G6-IGMP-MIB::statusRxAdvertisements,Unsigned32,read-only,,current,,Displays the number of received advertisements.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.8,G6-IGMP-MIB::statusRxTerminations,Unsigned32,read-only,,current,,Displays the number of received terminations.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.9,G6-IGMP-MIB::statusRxUnsupported,Unsigned32,read-only,,current,,Displays the number of received unsupported messages.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.10,G6-IGMP-MIB::statusRxErrors,Unsigned32,read-only,,current,,Displays the number of received error packets.
.1.3.6.1.4.1.3181.10.6.2.40.100.1.11,G6-IGMP-MIB::statusTxSolicitations,Unsigned32,read-only,,current,,Displays the number of transmitted solicitation messges.
.1.3.6.1.4.1.3181.10.6.2.40.101,G6-IGMP-MIB::mldStatusTable,,not-accessible,,current,,This table contains operational counters of the MLD snooping module.
.1.3.6.1.4.1.3181.10.6.2.40.101.1,G6-IGMP-MIB::mldStatusEntry,,not-accessible,mldStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.40.101.1.1,G6-IGMP-MIB::mldStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.40.101.1.2,G6-IGMP-MIB::mldStatusMldRouterPorts,INTEGER,read-only,,current,,Displays the igmp router ports list
.1.3.6.1.4.1.3181.10.6.2.40.101.1.3,G6-IGMP-MIB::mldStatusRxGeneralQueries,Unsigned32,read-only,,current,,Displays the number of received general queries.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.4,G6-IGMP-MIB::mldStatusRxGroupQueries,Unsigned32,read-only,,current,,Displays the number of received group queries.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.5,G6-IGMP-MIB::mldStatusRxReports,Unsigned32,read-only,,current,,Displays the number of received report messages.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.6,G6-IGMP-MIB::mldStatusRxLeaves,Unsigned32,read-only,,current,,Displays the number of received leave messages.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.7,G6-IGMP-MIB::mldStatusRxAdvertisements,Unsigned32,read-only,,current,,Displays the number of received advertisements.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.8,G6-IGMP-MIB::mldStatusRxTerminations,Unsigned32,read-only,,current,,Displays the number of received terminations.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.9,G6-IGMP-MIB::mldStatusRxUnsupported,Unsigned32,read-only,,current,,Displays the number of received unsupported messages.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.10,G6-IGMP-MIB::mldStatusRxErrors,Unsigned32,read-only,,current,,Displays the number of received error packets.
.1.3.6.1.4.1.3181.10.6.2.40.101.1.11,G6-IGMP-MIB::mldStatusTxSolicitations,Unsigned32,read-only,,current,,Displays the number of transmitted solicitation messges.
.1.3.6.1.4.1.3181.10.6.2.42,G6-STP-MIB::stp,,,,,,
.1.3.6.1.4.1.3181.10.6.2.42.1,G6-STP-MIB::bridgeConfigTable,,not-accessible,,current,,Configuration parameter concerning the general bridge setttings
.1.3.6.1.4.1.3181.10.6.2.42.1.1,G6-STP-MIB::bridgeConfigEntry,,not-accessible,bridgeConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.1.1.1,G6-STP-MIB::bridgeConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.1.1.2,G6-STP-MIB::bridgeConfigMode,INTEGER,read-write,,current,disabled(0):stp(1):rstp(2):mstp(3),Set base operating mode of spanning tree protocol.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.3,G6-STP-MIB::bridgeConfigPriority,Integer32,read-write,,current,,The value of the writeable portion of the Bridge ID.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.4,G6-STP-MIB::bridgeConfigHelloTime,Integer32,read-write,,current,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in seconds.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.5,G6-STP-MIB::bridgeConfigMaxAge,Integer32,read-write,,current,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in seconds.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.6,G6-STP-MIB::bridgeConfigForwardDelay,Integer32,read-write,,current,,Bridge forward delay in seconds.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.7,G6-STP-MIB::bridgeConfigTxHoldCount,Integer32,read-write,,current,,Limits the maximum transmission rate.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.8,G6-STP-MIB::bridgeConfigIeeePathCostModel,INTEGER,read-write,,current,ms1998Compliant(0):ms2004Compliant(1),Defines to which standard the admin_path_cost are compliant.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.9,G6-STP-MIB::bridgeConfigMstpRegionName,OCTET,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.1.1.10,G6-STP-MIB::bridgeConfigMstpRevisionLevel,Integer32,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.1.1.11,G6-STP-MIB::bridgeConfigMstpMaxHops,Integer32,read-write,,current,,Defines the initial value of remaining hops for MSTI information generated at the boundary of an MSTI region.
.1.3.6.1.4.1.3181.10.6.2.42.1.1.12,G6-STP-MIB::bridgeConfigMstpStpAgingTime,Unsigned32,read-write,,current,,This parameter is used only when MSTP is forced into STP mode for rapid aging.
.1.3.6.1.4.1.3181.10.6.2.42.2,G6-STP-MIB::portConfigTable,,not-accessible,,current,,Configuration parameter concerning the port specific STP setttings
.1.3.6.1.4.1.3181.10.6.2.42.2.1,G6-STP-MIB::portConfigEntry,,not-accessible,portConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.2.1.1,G6-STP-MIB::portConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.2.1.2,G6-STP-MIB::portConfigEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Enable (R)STP for this port.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.3,G6-STP-MIB::portConfigPriority,Integer32,read-write,,current,,Port priority value.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.4,G6-STP-MIB::portConfigAdminP2pPort,INTEGER,read-write,,current,auto(0):forceFalse(1):forceTrue(2),A value of forceTrue indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse indicates that this port should be treated as having a shared media connection.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.5,G6-STP-MIB::portConfigAdminEdgePort,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled this port is assumed to be an edge port.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.6,G6-STP-MIB::portConfigAdminPathCost,Unsigned32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.7,G6-STP-MIB::portConfigProtocolMigration,OCTET,read-write,,current,,When operating in RSTP mode, setting this object forces this port to transmit RSTP BPDUs.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.8,G6-STP-MIB::portConfigBridgeAssurance,INTEGER,read-write,,current,disabled(0):enabled(1),The bridge assurance is used to detectunidirectional link failures or remote devices that stop sending spanning tree information due to a software fault. Important: Only enable when the other directly connected switches also support this feature.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.9,G6-STP-MIB::portConfigMstpDefaultPriority,Integer32,read-write,,current,,The port priority used in all MSTP instances unless otherwise configured in mstp_port_priority.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.10,G6-STP-MIB::portConfigMstpPortPriority,OCTET,read-write,,current,,The port priority used in all specific MSTP instances. Syntax: mstp_id:port_priority. E.g.: 1:32, 2:128, 5:128
.1.3.6.1.4.1.3181.10.6.2.42.2.1.11,G6-STP-MIB::portConfigMstpDefaultAdminPathCost,Unsigned32,read-write,,current,,The port path cost used in all MSTP instances unless otherwise configured in mstp_port_admin_path_cost.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.12,G6-STP-MIB::portConfigMstpPortAdminPathCost,OCTET,read-write,,current,,The port path cost used in specific MSTP instances. Syntax: mstp_id:port_path_cost. E.g.: 1:4, 2:100
.1.3.6.1.4.1.3181.10.6.2.42.2.1.13,G6-STP-MIB::portConfigBpduGuard,INTEGER,read-write,,current,disabled(0):dropAndEvent(1):blockPort(2),When enabled STP attempts from a user port are blocked. This prevents a malicious user from influencing the overall network routing.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.14,G6-STP-MIB::portConfigBpduReceiveOnly,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled this port listens to incoming BPDU packets for spanning tree algorithm but never transmits any.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.15,G6-STP-MIB::portConfigRestrictTcn,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the port does not forward topology change notification BPDUs.
.1.3.6.1.4.1.3181.10.6.2.42.2.1.16,G6-STP-MIB::portConfigRestrictRoot,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled this port cannot become a root bridge port for the spanning tree protocol.
.1.3.6.1.4.1.3181.10.6.2.42.3,G6-STP-MIB::mstpGroupTable,,not-accessible,,current,,This table defines MSTP parameter that my be different between instances. The mstp_id is referrenced from vlan.filter_config.mstp_group. Several VLAN may share the same MSTP group. If needed up to 63 table entires can be created. 
.1.3.6.1.4.1.3181.10.6.2.42.3.1,G6-STP-MIB::mstpGroupEntry,,not-accessible,mstpGroupIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.3.1.1,G6-STP-MIB::mstpGroupIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.3.1.2,G6-STP-MIB::mstpGroupMstpId,OCTET,read-write,,current,,Defines filter table entry for this MSTP Group Id. This is the key value for the table. Type '=:' to edit, use index '[*] = new_id:' to add an entry. Edit string to nothing to delete entry.
.1.3.6.1.4.1.3181.10.6.2.42.3.1.3,G6-STP-MIB::mstpGroupBridgePriority,Integer32,read-write,,current,,The value of the writeable portion of the Bridge ID for this MSTP instance.
.1.3.6.1.4.1.3181.10.6.2.42.100,G6-STP-MIB::bridgeStatusTable,,not-accessible,,current,,This status table collects all bridge related status fields.
.1.3.6.1.4.1.3181.10.6.2.42.100.1,G6-STP-MIB::bridgeStatusEntry,,not-accessible,bridgeStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.100.1.1,G6-STP-MIB::bridgeStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.100.1.2,G6-STP-MIB::bridgeStatusStpProtocol,Integer32,read-only,,current,,Stp protocol specification = 3 for 802.1D.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.3,G6-STP-MIB::bridgeStatusHelloTime,Integer32,read-only,,current,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in seconds. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.4,G6-STP-MIB::bridgeStatusMaxAge,Integer32,read-only,,current,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in seconds. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.5,G6-STP-MIB::bridgeStatusHoldTime,Integer32,read-only,,current,,This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in seconds.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.6,G6-STP-MIB::bridgeStatusForwardDelay,Integer32,read-only,,current,,This time controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.7,G6-STP-MIB::bridgeStatusRootPort,Integer32,read-only,,current,,The port number of the port that offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.8,G6-STP-MIB::bridgeStatusRootCost,Unsigned32,read-only,,current,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.9,G6-STP-MIB::bridgeStatusTopologyChanges,Integer32,read-only,,current,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.10,G6-STP-MIB::bridgeStatusLastTopologyChange,Counter32,read-only,,current,,The time in seconds when the last time a topology change was detected.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.11,G6-STP-MIB::bridgeStatusMstpRegionName,OCTET,read-only,,current,,This the region name actually used.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.12,G6-STP-MIB::bridgeStatusMstiRevisionLevel,Integer32,read-only,,current,,This the revision level actually used.
.1.3.6.1.4.1.3181.10.6.2.42.100.1.13,G6-STP-MIB::bridgeStatusCistInternalRootPathCost,Unsigned32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.100.1.14,G6-STP-MIB::bridgeStatusCistRegionalRootId,OCTET,read-only,,current,,The Bridge Identifier of the current CIST Regional Root
.1.3.6.1.4.1.3181.10.6.2.42.100.1.15,G6-STP-MIB::bridgeStatusCistRegionalRootPriority,Unsigned32,read-only,,current,,The Bridge priority of the current CIST Regional Root
.1.3.6.1.4.1.3181.10.6.2.42.100.1.16,G6-STP-MIB::bridgeStatusCistRegionalRootMac,OCTET,read-only,,current,,The Bridge MAC of the current CIST Regional Root
.1.3.6.1.4.1.3181.10.6.2.42.100.1.17,G6-STP-MIB::bridgeStatusMaxHops,Integer32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.100.1.18,G6-STP-MIB::bridgeStatusMstpStpAgingTime,Unsigned32,read-only,,current,,Aging time of the bridge
.1.3.6.1.4.1.3181.10.6.2.42.101,G6-STP-MIB::portStatusTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.101.1,G6-STP-MIB::portStatusEntry,,not-accessible,portStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.101.1.1,G6-STP-MIB::portStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.101.1.2,G6-STP-MIB::portStatusPort,Integer32,read-only,,current,,The port for which these spanning tree information apply.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.3,G6-STP-MIB::portStatusState,INTEGER,read-only,,current,unknown(0):discarding(1):learning(2):forwarding(3):blocking(4):listening(5):broken(6),This state controls what action a port takes on reception of a frame.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.4,G6-STP-MIB::portStatusLocalPortCost,Unsigned32,read-only,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. This is the actually used value.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.5,G6-STP-MIB::portStatusDesignatedPortId,OCTET,read-only,,current,,The Port priority and identifier of the port on the Designated Bridge for this port's segment. Format: Priority:PortId.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.6,G6-STP-MIB::portStatusDesignatedPort,Unsigned32,read-only,,current,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.7,G6-STP-MIB::portStatusDesignatedPortPriority,Unsigned32,read-only,,current,,The priority of the port on the Designated Bridge for this port's segment.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.8,G6-STP-MIB::portStatusDesignatedCost,Unsigned32,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.9,G6-STP-MIB::portStatusDesignatedRootId,OCTET,read-only,,current,,The priority of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is connected. This is a 4-bit value included along with 12-bit of designated_root_mac as Root Bridge Identifier.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.10,G6-STP-MIB::portStatusDesignatedRootMac,OCTET,read-only,,current,,This contains just the MAC part of the bridge id.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.11,G6-STP-MIB::portStatusDesignatedRootPriority,Integer32,read-only,,current,,This contains just the priorty part of the bridge id.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.12,G6-STP-MIB::portStatusDesignatedBridgeId,OCTET,read-only,,current,,The priority of the Bridge that this port considers to be the Designated Bridge for this port segment.This is a 4-bit value included along with 12-bit of designated_bridge_mac as Bridge Identifier.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.13,G6-STP-MIB::portStatusDesignatedBridgeMac,OCTET,read-only,,current,,The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.14,G6-STP-MIB::portStatusDesignatedBridgePriority,Integer32,read-only,,current,,This contains just the priorty part of the bridge id.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.15,G6-STP-MIB::portStatusForwardTransition,Unsigned32,read-only,,current,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.16,G6-STP-MIB::portStatusOperEdgePort,INTEGER,read-only,,current,false(0):true(1),A value of true indicates that this port should be assumed as an edge-port.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.17,G6-STP-MIB::portStatusOperP2pPort,INTEGER,read-only,,current,false(0):true(1),The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection.
.1.3.6.1.4.1.3181.10.6.2.42.101.1.18,G6-STP-MIB::portStatusRole,INTEGER,read-only,,current,unknown(0):root(1):designated(2):alternate(3):backup(4):master(5):disabled(6),Assigned port role
.1.3.6.1.4.1.3181.10.6.2.42.101.1.19,G6-STP-MIB::portStatusInconsistentBridge,INTEGER,read-only,,current,false(0):true(1),A value of true indicates that the port is inconsistent due to Bridge assurance.
.1.3.6.1.4.1.3181.10.6.2.42.102,G6-STP-MIB::mstpStatusTableTable,,not-accessible,,current,,This table contains a record for each MSTP instance and for each port thereof. Table ends with first record with mstp_id=0.
.1.3.6.1.4.1.3181.10.6.2.42.102.1,G6-STP-MIB::mstpStatusTableEntry,,not-accessible,mstpStatusTableIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.102.1.1,G6-STP-MIB::mstpStatusTableIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.102.1.2,G6-STP-MIB::mstpStatusTableMstpId,Integer32,read-only,,current,,MSTP instance this entry
.1.3.6.1.4.1.3181.10.6.2.42.102.1.3,G6-STP-MIB::mstpStatusTablePort,Integer32,read-only,,current,,Port id of the port in relation to above MSTP instance.
.1.3.6.1.4.1.3181.10.6.2.42.102.1.4,G6-STP-MIB::mstpStatusTableState,INTEGER,read-only,,current,unknown(0):discarding(1):learning(2):forwarding(3):blocking(4):listening(5):broken(6),This state controls what action a port takes on reception of a frame.
.1.3.6.1.4.1.3181.10.6.2.42.102.1.5,G6-STP-MIB::mstpStatusTablePortPriority,Integer32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.102.1.6,G6-STP-MIB::mstpStatusTableInternalAdminPathCost,Unsigned32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.102.1.7,G6-STP-MIB::mstpStatusTableForwardTransition,Unsigned32,read-only,,current,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.4.1.3181.10.6.2.42.102.1.8,G6-STP-MIB::mstpStatusTableRole,INTEGER,read-only,,current,unknown(0):root(1):designated(2):alternate(3):backup(4):master(5):disabled(6),Assigned port role
.1.3.6.1.4.1.3181.10.6.2.42.103,G6-STP-MIB::mstpBridgeStatusTable,,not-accessible,,current,,This status table collects all multiple spanning tree bridge related status fields.
.1.3.6.1.4.1.3181.10.6.2.42.103.1,G6-STP-MIB::mstpBridgeStatusEntry,,not-accessible,mstpBridgeStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.42.103.1.1,G6-STP-MIB::mstpBridgeStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.42.103.1.2,G6-STP-MIB::mstpBridgeStatusMstpId,Integer32,read-only,,current,,MSTP instance identifier.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.3,G6-STP-MIB::mstpBridgeStatusBridgePriority,Unsigned32,read-only,,current,,Bridge priority.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.4,G6-STP-MIB::mstpBridgeStatusRootPort,Integer32,read-only,,current,,The port number of the port that offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.5,G6-STP-MIB::mstpBridgeStatusRootCost,Unsigned32,read-only,,current,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.6,G6-STP-MIB::mstpBridgeStatusMaxHops,Integer32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.2.42.103.1.7,G6-STP-MIB::mstpBridgeStatusRegionalRootId,OCTET,read-only,,current,,The priority of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is connected. This is a 4-bit value included along with 12-bit of designated_root_mac as Root Bridge Identifier.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.8,G6-STP-MIB::mstpBridgeStatusRegionalRootPriority,Unsigned32,read-only,,current,,This contains just the MAC part of the bridge id.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.9,G6-STP-MIB::mstpBridgeStatusRegionalRootMac,OCTET,read-only,,current,,This contains just the priorty part of the bridge id.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.10,G6-STP-MIB::mstpBridgeStatusTopologyChanges,Integer32,read-only,,current,,The total number of topology changes detected by this mstp bridge instance since the management entity was last reset or initialized.
.1.3.6.1.4.1.3181.10.6.2.42.103.1.11,G6-STP-MIB::mstpBridgeStatusLastTopologyChange,Counter32,read-only,,current,,The time in seconds when the last time a topology change was detected.
.1.3.6.1.4.1.3181.10.6.2.43,G6-LLDP-MIB::lldp,,,,,,
.1.3.6.1.4.1.3181.10.6.2.43.1,G6-LLDP-MIB::configTable,,not-accessible,,current,,General settings for LLDP (link layer discovery protocol). This protocol is used to identify the directly attached neighbor devices. This is useful to build a network topolgy. It is also used to identify voip telephones and to set them up.
.1.3.6.1.4.1.3181.10.6.2.43.1.1,G6-LLDP-MIB::configEntry,,not-accessible,configIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.1.1.1,G6-LLDP-MIB::configIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.1.1.2,G6-LLDP-MIB::configEnableLldp,INTEGER,read-write,,current,disabled(0):enabled(1),This generally enables the link layer discovery protocol (LLDP).
.1.3.6.1.4.1.3181.10.6.2.43.1.1.3,G6-LLDP-MIB::configEnableCdp,INTEGER,read-write,,current,disabled(0):enabled(1),This enables Cisco discovery protocol. Check cdp_version parameter to select CDP version.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.4,G6-LLDP-MIB::configLldpEnabledPorts,INTEGER,read-write,,current,,This parameter permits port selective LLDP enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example = 0x7 defines ports 1-3.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.5,G6-LLDP-MIB::configReceiveOnly,INTEGER,read-write,,current,disabled(0):enabled(1),This enables receive only mode. LLDP will not send any frames. It will only listen to its neighbours. 
.1.3.6.1.4.1.3181.10.6.2.43.1.1.6,G6-LLDP-MIB::configForwardToLink,INTEGER,read-write,,current,disabled(0):enabled(1),This mode forwards all received LLDP packets to the uplink port. In combination with receive_only option enabled this unit keeps quiet and all LLDP handling should be taken care off by the upstream device.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.7,G6-LLDP-MIB::configAdvertizedMedClass,INTEGER,read-write,,current,disableMed(0):genericEndpoint(1):mediaEndpoint(2):communicationEndpoint(3):networkDevice(4),Enables emission of LLDP-MED frames of a certain class.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.8,G6-LLDP-MIB::configDisableMedInventory,INTEGER,read-write,,current,disabled(0):enabled(1),Disable LLDP-MED inventory TLV transmission.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.9,G6-LLDP-MIB::configDisableVoiceVlanTlv,INTEGER,read-write,,current,disabled(0):enabled(1),Disable voice vlan indication TLV transmission.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.10,G6-LLDP-MIB::configCdpVersion,INTEGER,read-write,,current,v1AndV2(0):v1(1):v2(2),Determines which version CDP messages are used.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.11,G6-LLDP-MIB::configVoiceVlanPrio,Integer32,read-write,,current,,Layer 2 priority used for voice vlan in voip application.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.12,G6-LLDP-MIB::configVoiceVlanSignalPrio,Integer32,read-write,,current,,Layer 2 priority used for voice vlan signaling in voip application.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.13,G6-LLDP-MIB::configVoiceDscp,Integer32,read-write,,current,,DiffServ codepoint (0-63) for voip application
.1.3.6.1.4.1.3181.10.6.2.43.1.1.14,G6-LLDP-MIB::configSignalingDscp,Integer32,read-write,,current,,DiffServ codepoint (0-63) for voip signaling
.1.3.6.1.4.1.3181.10.6.2.43.1.1.15,G6-LLDP-MIB::configTimeToLive,Integer32,read-write,,current,,The time to live value defines the time for which the lldp transmitted details are valid and can be displayed in the status.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.16,G6-LLDP-MIB::configTxDelay,Integer32,read-write,,current,,Transmission delay in seconds between successive LLDP frame transmissions initiated by changes in the LLDP local configuration.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.17,G6-LLDP-MIB::configMsgTxInterval,Integer32,read-write,,current,,The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.18,G6-LLDP-MIB::configForceLldpTransmission,INTEGER,read-write,,current,disabled(0):enabled(1),Force to send LLDP packets even when there is no LLDP peer detected.
.1.3.6.1.4.1.3181.10.6.2.43.1.1.19,G6-LLDP-MIB::configLldpResponsePreferred,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled LLDP responses takes precende over CDP protocol responses.
.1.3.6.1.4.1.3181.10.6.2.43.2,G6-LLDP-MIB::localCoordinatesTable,,not-accessible,,current,,Detailed GPS information about the pysical location of this device may be entered here.
.1.3.6.1.4.1.3181.10.6.2.43.2.1,G6-LLDP-MIB::localCoordinatesEntry,,not-accessible,localCoordinatesIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.2.1.1,G6-LLDP-MIB::localCoordinatesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.2.1.2,G6-LLDP-MIB::localCoordinatesLatitude,OCTET,read-write,,current,,A value in degrees such as: 50,123
.1.3.6.1.4.1.3181.10.6.2.43.2.1.3,G6-LLDP-MIB::localCoordinatesLatResolution,Integer32,read-write,,current,,A value in bits. Higher value is more accurate.
.1.3.6.1.4.1.3181.10.6.2.43.2.1.4,G6-LLDP-MIB::localCoordinatesLongitude,OCTET,read-write,,current,,A value in degrees such as: 50,123
.1.3.6.1.4.1.3181.10.6.2.43.2.1.5,G6-LLDP-MIB::localCoordinatesLongResolution,Integer32,read-write,,current,,A value in bits. Higher value is more accurate.
.1.3.6.1.4.1.3181.10.6.2.43.2.1.6,G6-LLDP-MIB::localCoordinatesAltitude,OCTET,read-write,,current,,A value in meters.
.1.3.6.1.4.1.3181.10.6.2.43.2.1.7,G6-LLDP-MIB::localCoordinatesAltResolution,Integer32,read-write,,current,,A value in bits. Higher value is more accurate.
.1.3.6.1.4.1.3181.10.6.2.43.2.1.8,G6-LLDP-MIB::localCoordinatesAltType,INTEGER,read-write,,current,meter(0):floor(1),Defines in which way the altitude is interpreted.
.1.3.6.1.4.1.3181.10.6.2.43.2.1.9,G6-LLDP-MIB::localCoordinatesDatum,OCTET,read-write,,current,,Name of the map the given coordinates are based upon.
.1.3.6.1.4.1.3181.10.6.2.43.3,G6-LLDP-MIB::localCivicLocationTable,,not-accessible,,current,,Detailed address information about the physical location of this device may be entered here. These data are forwarded using the LLDP-MED protocol. 
.1.3.6.1.4.1.3181.10.6.2.43.3.1,G6-LLDP-MIB::localCivicLocationEntry,,not-accessible,localCivicLocationIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.3.1.1,G6-LLDP-MIB::localCivicLocationIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.3.1.2,G6-LLDP-MIB::localCivicLocationCountryCode,OCTET,read-write,,current,,Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.3,G6-LLDP-MIB::localCivicLocationLanguage,OCTET,read-write,,current,,ISO 639 language code used for presenting the address information.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.4,G6-LLDP-MIB::localCivicLocationNationalSubdivision,OCTET,read-write,,current,,National subdivision: state, canton, region, province, or prefecture. Example: Hessen
.1.3.6.1.4.1.3181.10.6.2.43.3.1.5,G6-LLDP-MIB::localCivicLocationCounty,OCTET,read-write,,current,,County / parish / district. Example: Landkreis Darmstadt
.1.3.6.1.4.1.3181.10.6.2.43.3.1.6,G6-LLDP-MIB::localCivicLocationTown,OCTET,read-write,,current,,City / township. Example: Frankfurt
.1.3.6.1.4.1.3181.10.6.2.43.3.1.7,G6-LLDP-MIB::localCivicLocationDistrict,OCTET,read-write,,current,,City district / division / borough / ward.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.8,G6-LLDP-MIB::localCivicLocationBlock,OCTET,read-write,,current,,Neighborhood / block.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.9,G6-LLDP-MIB::localCivicLocationStreet,OCTET,read-write,,current,,Name of the street without house number.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.10,G6-LLDP-MIB::localCivicLocationLeadingStreetDirection,OCTET,read-write,,current,,Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.11,G6-LLDP-MIB::localCivicLocationTrailingStreetSuffix,OCTET,read-write,,current,,Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.12,G6-LLDP-MIB::localCivicLocationStreetSuffix,OCTET,read-write,,current,,Street suffix such as place or avenue.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.13,G6-LLDP-MIB::localCivicLocationHouseNumber,OCTET,read-write,,current,,House number without a possible suffix.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.14,G6-LLDP-MIB::localCivicLocationHouseNumberSuffix,OCTET,read-write,,current,,A modifier to the house number. It does not include parts of the house number. Example: a
.1.3.6.1.4.1.3181.10.6.2.43.3.1.15,G6-LLDP-MIB::localCivicLocationLandmark,OCTET,read-write,,current,,Landmark or vanity address for easier reference. Example: Airport Frankfurt
.1.3.6.1.4.1.3181.10.6.2.43.3.1.16,G6-LLDP-MIB::localCivicLocationAdditionalInfo,OCTET,read-write,,current,,Additional location information without specified format.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.17,G6-LLDP-MIB::localCivicLocationName,OCTET,read-write,,current,,Identifies the person or organization associated with the address. Example: Sunshine Airline Office
.1.3.6.1.4.1.3181.10.6.2.43.3.1.18,G6-LLDP-MIB::localCivicLocationZipCode,OCTET,read-write,,current,,Postal zip code for the address.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.19,G6-LLDP-MIB::localCivicLocationBuilding,OCTET,read-write,,current,,The name of the building if this exists. Example: Terminal Building East
.1.3.6.1.4.1.3181.10.6.2.43.3.1.20,G6-LLDP-MIB::localCivicLocationUnit,OCTET,read-write,,current,,Unit / appartment / suite.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.21,G6-LLDP-MIB::localCivicLocationFloor,OCTET,read-write,,current,,Floor value. Example: 1 for first floor
.1.3.6.1.4.1.3181.10.6.2.43.3.1.22,G6-LLDP-MIB::localCivicLocationRoom,OCTET,read-write,,current,,Room number or name.
.1.3.6.1.4.1.3181.10.6.2.43.3.1.23,G6-LLDP-MIB::localCivicLocationPlaceType,OCTET,read-write,,current,,Place type. Example: Office
.1.3.6.1.4.1.3181.10.6.2.43.3.1.24,G6-LLDP-MIB::localCivicLocationScript,OCTET,read-write,,current,,The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
.1.3.6.1.4.1.3181.10.6.2.43.3.1.25,G6-LLDP-MIB::localCivicLocationElinNumber,OCTET,read-write,,current,,Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
.1.3.6.1.4.1.3181.10.6.2.43.100,G6-LLDP-MIB::receivedOverviewTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.2.43.100.1,G6-LLDP-MIB::receivedOverviewEntry,,not-accessible,receivedOverviewPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.100.1.1,G6-LLDP-MIB::receivedOverviewPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.100.1.2,G6-LLDP-MIB::receivedOverviewSysName,OCTET,read-only,,current,,System name.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.3,G6-LLDP-MIB::receivedOverviewSysDesc,OCTET,read-only,,current,,System description.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.4,G6-LLDP-MIB::receivedOverviewChassisIdSubtype,INTEGER,read-only,,current,unknown(0):chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),Type of chassis id.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.5,G6-LLDP-MIB::receivedOverviewChassisId,OCTET,read-only,,current,,Chassis id of received frame.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.6,G6-LLDP-MIB::receivedOverviewMgmtIp,OCTET,read-only,,current,,Management IP address.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.7,G6-LLDP-MIB::receivedOverviewMgmtOid,OCTET,read-only,,current,,Management start OID for SNMP access.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.8,G6-LLDP-MIB::receivedOverviewCapabilities,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlan(3):router(4):telephone(5):docsis(6):station(7),LLDP capabilities supported.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.9,G6-LLDP-MIB::receivedOverviewCapabilitiesEnabled,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlan(3):router(4):telephone(5):docsis(6):station(7),LLDP capabilities enabled.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.10,G6-LLDP-MIB::receivedOverviewMedCapabilities,BITS,read-only,,current,capability(0):policy(1):location(2):mdiPse(3):mdiPd(4):inventory(5),LLDP_MED capabilities.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.11,G6-LLDP-MIB::receivedOverviewPortIdSubtype,INTEGER,read-only,,current,unknown(0):interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),Type of port id.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.12,G6-LLDP-MIB::receivedOverviewPortIdentification,OCTET,read-only,,current,,Port id.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.13,G6-LLDP-MIB::receivedOverviewPortDescription,OCTET,read-only,,current,,Port description.
.1.3.6.1.4.1.3181.10.6.2.43.100.1.14,G6-LLDP-MIB::receivedOverviewPortVlan,Integer32,read-only,,current,,Port vlan identifier. Related to port_default_vlan_id.
.1.3.6.1.4.1.3181.10.6.2.43.101,G6-LLDP-MIB::receivedCoordinatesTable,,not-accessible,,current,,Detailed GPS information about the pysical location of the attached device for each port are visible here if provided through the LLDP-MED protocol. 
.1.3.6.1.4.1.3181.10.6.2.43.101.1,G6-LLDP-MIB::receivedCoordinatesEntry,,not-accessible,receivedCoordinatesPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.101.1.1,G6-LLDP-MIB::receivedCoordinatesPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.101.1.2,G6-LLDP-MIB::receivedCoordinatesLatitude,OCTET,read-only,,current,,A value in degrees such as: 50,123
.1.3.6.1.4.1.3181.10.6.2.43.101.1.3,G6-LLDP-MIB::receivedCoordinatesLatResolution,Integer32,read-only,,current,,A value in bits. Higher value is more accurate.
.1.3.6.1.4.1.3181.10.6.2.43.101.1.4,G6-LLDP-MIB::receivedCoordinatesLongitude,OCTET,read-only,,current,,A value in degrees such as: 50,123
.1.3.6.1.4.1.3181.10.6.2.43.101.1.5,G6-LLDP-MIB::receivedCoordinatesLongResolution,Integer32,read-only,,current,,A value in bits. Higher value is more accurate.
.1.3.6.1.4.1.3181.10.6.2.43.101.1.6,G6-LLDP-MIB::receivedCoordinatesAltitude,OCTET,read-only,,current,,A value in meters or the floor level depending on definition.
.1.3.6.1.4.1.3181.10.6.2.43.101.1.7,G6-LLDP-MIB::receivedCoordinatesAltResolution,Integer32,read-only,,current,,A value in bits. Higher value is more accurate.
.1.3.6.1.4.1.3181.10.6.2.43.101.1.8,G6-LLDP-MIB::receivedCoordinatesAltUnit,INTEGER,read-only,,current,meter(0):floor(1),Defines in which way the altitude is interpreted.
.1.3.6.1.4.1.3181.10.6.2.43.101.1.9,G6-LLDP-MIB::receivedCoordinatesDatum,OCTET,read-only,,current,,Name of the map the given coordinates are based upon.
.1.3.6.1.4.1.3181.10.6.2.43.102,G6-LLDP-MIB::receivedCivicLocationsTable,,not-accessible,,current,,Detailed address information about the physical location of the attached device for each port are visible here if provided through the LLDP-MED protocol. 
.1.3.6.1.4.1.3181.10.6.2.43.102.1,G6-LLDP-MIB::receivedCivicLocationsEntry,,not-accessible,receivedCivicLocationsPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.102.1.1,G6-LLDP-MIB::receivedCivicLocationsPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.102.1.2,G6-LLDP-MIB::receivedCivicLocationsCountryCode,OCTET,read-only,,current,,Two-letter ISO 3166 country code in capital ASCII letters. Use DE for Germany, etc.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.3,G6-LLDP-MIB::receivedCivicLocationsLanguage,OCTET,read-only,,current,,ISO 639 language code used for presenting the address information.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.4,G6-LLDP-MIB::receivedCivicLocationsNationalSubdivision,OCTET,read-only,,current,,National subdivision: state, canton, region, province, or prefecture. Example: Hessen.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.5,G6-LLDP-MIB::receivedCivicLocationsCounty,OCTET,read-only,,current,,County / parish / district. Example: Landkreis Darmstadt
.1.3.6.1.4.1.3181.10.6.2.43.102.1.6,G6-LLDP-MIB::receivedCivicLocationsTown,OCTET,read-only,,current,,City / township. Example: Frankfurt
.1.3.6.1.4.1.3181.10.6.2.43.102.1.7,G6-LLDP-MIB::receivedCivicLocationsDistrict,OCTET,read-only,,current,,City district / division / borough / ward.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.8,G6-LLDP-MIB::receivedCivicLocationsBlock,OCTET,read-only,,current,,Neighborhood / block.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.9,G6-LLDP-MIB::receivedCivicLocationsStreet,OCTET,read-only,,current,,Name of the street without house number.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.10,G6-LLDP-MIB::receivedCivicLocationsLeadingStreetDirection,OCTET,read-only,,current,,Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.11,G6-LLDP-MIB::receivedCivicLocationsTrailingStreetSuffix,OCTET,read-only,,current,,Use any of these values or leave blank: N,E,W,S,NE,NW,SE,SW.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.12,G6-LLDP-MIB::receivedCivicLocationsStreetSuffix,OCTET,read-only,,current,,Street suffix such as place or avenue.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.13,G6-LLDP-MIB::receivedCivicLocationsHouseNumber,OCTET,read-only,,current,,House number without a possible suffix.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.14,G6-LLDP-MIB::receivedCivicLocationsHouseNumberSuffix,OCTET,read-only,,current,,A modifier to the house number. It does not include parts of the house number. Example: a
.1.3.6.1.4.1.3181.10.6.2.43.102.1.15,G6-LLDP-MIB::receivedCivicLocationsLandmark,OCTET,read-only,,current,,Landmark or vanity address for easier reference. Example: Airport Frankfurt
.1.3.6.1.4.1.3181.10.6.2.43.102.1.16,G6-LLDP-MIB::receivedCivicLocationsAdditionalInfo,OCTET,read-only,,current,,Additional location information without specified format.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.17,G6-LLDP-MIB::receivedCivicLocationsName,OCTET,read-only,,current,,Identifies the person or organization associated with the address. Example: Sunshine Airline Office
.1.3.6.1.4.1.3181.10.6.2.43.102.1.18,G6-LLDP-MIB::receivedCivicLocationsZipCode,OCTET,read-only,,current,,Postal zip code for the address.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.19,G6-LLDP-MIB::receivedCivicLocationsBuilding,OCTET,read-only,,current,,The name of the building if this exists. Example: Terminal Building East
.1.3.6.1.4.1.3181.10.6.2.43.102.1.20,G6-LLDP-MIB::receivedCivicLocationsUnit,OCTET,read-only,,current,,Unit / appartment / suite.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.21,G6-LLDP-MIB::receivedCivicLocationsFloor,OCTET,read-only,,current,,Floor value. Example: 1 for first floor.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.22,G6-LLDP-MIB::receivedCivicLocationsRoom,OCTET,read-only,,current,,Room number or name.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.23,G6-LLDP-MIB::receivedCivicLocationsPlaceType,OCTET,read-only,,current,,Place type. Example: Office.
.1.3.6.1.4.1.3181.10.6.2.43.102.1.24,G6-LLDP-MIB::receivedCivicLocationsScript,OCTET,read-only,,current,,The script (from ISO 15924 [14]) used to encode the address information. Default: Latn
.1.3.6.1.4.1.3181.10.6.2.43.102.1.25,G6-LLDP-MIB::receivedCivicLocationsElinNumber,OCTET,read-only,,current,,Emergency Call Services (ECS) Emergency Location Identification Number (ELIN).
.1.3.6.1.4.1.3181.10.6.2.43.103,G6-LLDP-MIB::receivedPoliciesTable,,not-accessible,,current,,Detailed information about the attached applications. 
.1.3.6.1.4.1.3181.10.6.2.43.103.1,G6-LLDP-MIB::receivedPoliciesEntry,,not-accessible,receivedPoliciesPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.103.1.1,G6-LLDP-MIB::receivedPoliciesPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.103.1.2,G6-LLDP-MIB::receivedPoliciesApplicationType,INTEGER,read-only,,current,unknown(0):voice(1):voiceSignaling(2):guestVoice(3):guestVoiceSignaling(4):softphoneVoice(5):videoConferencing(6):streamingVideo(7):videoSignaling(8),Valid application types.
.1.3.6.1.4.1.3181.10.6.2.43.103.1.3,G6-LLDP-MIB::receivedPoliciesPolicyDefined,INTEGER,read-only,,current,false(0):true(1),False indicates policy is unknown. True indicates policy is defined.
.1.3.6.1.4.1.3181.10.6.2.43.103.1.4,G6-LLDP-MIB::receivedPoliciesTaggedVlan,INTEGER,read-only,,current,false(0):true(1),When set VLAN tagging is used.
.1.3.6.1.4.1.3181.10.6.2.43.103.1.5,G6-LLDP-MIB::receivedPoliciesVlanId,Unsigned32,read-only,,current,,0 - only the priority level is significant. / IEEE 802.1q VLAN ID (VID) value. Related to voice vlan.
.1.3.6.1.4.1.3181.10.6.2.43.103.1.6,G6-LLDP-MIB::receivedPoliciesLayer2Priority,INTEGER,read-only,,current,unknown(0):background(1):spare(2):bestEffort(3):excellentEffort(4):controlledLoad(5):video(6):voice(7):networkControl(8),IEEE 802.1d / IEEE 802.1p Layer 2 Priority.
.1.3.6.1.4.1.3181.10.6.2.43.103.1.7,G6-LLDP-MIB::receivedPoliciesDscp,Integer32,read-only,,current,,DiffServ/Differentiated Services Code Point (DSCP) value as defined in IETF RFC 2474 for the specified application type.
.1.3.6.1.4.1.3181.10.6.2.43.104,G6-LLDP-MIB::receivedInventoryInfosTable,,not-accessible,,current,,This table lists general inventory data of the attached equipment.
.1.3.6.1.4.1.3181.10.6.2.43.104.1,G6-LLDP-MIB::receivedInventoryInfosEntry,,not-accessible,receivedInventoryInfosPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.104.1.1,G6-LLDP-MIB::receivedInventoryInfosPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.104.1.2,G6-LLDP-MIB::receivedInventoryInfosHardwareRevision,OCTET,read-only,,current,,Hardware version
.1.3.6.1.4.1.3181.10.6.2.43.104.1.3,G6-LLDP-MIB::receivedInventoryInfosFirmwareRevision,OCTET,read-only,,current,,Firmware version
.1.3.6.1.4.1.3181.10.6.2.43.104.1.4,G6-LLDP-MIB::receivedInventoryInfosSoftwareRevision,OCTET,read-only,,current,,Software version
.1.3.6.1.4.1.3181.10.6.2.43.104.1.5,G6-LLDP-MIB::receivedInventoryInfosSerialNumber,OCTET,read-only,,current,,Serial number
.1.3.6.1.4.1.3181.10.6.2.43.104.1.6,G6-LLDP-MIB::receivedInventoryInfosManufacturer,OCTET,read-only,,current,,Manufacturer name
.1.3.6.1.4.1.3181.10.6.2.43.104.1.7,G6-LLDP-MIB::receivedInventoryInfosModelName,OCTET,read-only,,current,,Vendor-specific model name
.1.3.6.1.4.1.3181.10.6.2.43.104.1.8,G6-LLDP-MIB::receivedInventoryInfosAssetId,OCTET,read-only,,current,,Vendor-specific asset tracking identifier
.1.3.6.1.4.1.3181.10.6.2.43.105,G6-LLDP-MIB::receivedPoeInfosTable,,not-accessible,,current,,Detailed PoE information about the attached applications. 
.1.3.6.1.4.1.3181.10.6.2.43.105.1,G6-LLDP-MIB::receivedPoeInfosEntry,,not-accessible,receivedPoeInfosPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.105.1.1,G6-LLDP-MIB::receivedPoeInfosPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.105.1.2,G6-LLDP-MIB::receivedPoeInfosType,INTEGER,read-only,,current,unknown(0):pse(1):pd(2):noPoe(3),Type of PoE equipment.
.1.3.6.1.4.1.3181.10.6.2.43.105.1.3,G6-LLDP-MIB::receivedPoeInfosSource,INTEGER,read-only,,current,unknown(0):pdPsePrimary(1):pdLocalBackup(2):pdPseLocal(3),Describes the power source.
.1.3.6.1.4.1.3181.10.6.2.43.105.1.4,G6-LLDP-MIB::receivedPoeInfosPriority,INTEGER,read-only,,current,unknown(0):critical(1):high(2):low(3),Indicates priority of this device.
.1.3.6.1.4.1.3181.10.6.2.43.105.1.5,G6-LLDP-MIB::receivedPoeInfosValue,Unsigned32,read-only,,current,,Indicates the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.
.1.3.6.1.4.1.3181.10.6.2.43.106,G6-LLDP-MIB::receivedPoeControlTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.2.43.106.1,G6-LLDP-MIB::receivedPoeControlEntry,,not-accessible,receivedPoeControlPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.43.106.1.1,G6-LLDP-MIB::receivedPoeControlPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.43.106.1.2,G6-LLDP-MIB::receivedPoeControlType,INTEGER,read-only,,current,unknown(0):pse(1):pd(2):noPoe(3),Indicates device type.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.3,G6-LLDP-MIB::receivedPoeControlPoePowerSupported,INTEGER,read-only,,current,false(0):true(1),Indicates if PoE is supported by the interface.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.4,G6-LLDP-MIB::receivedPoeControlPoePowerEnabled,INTEGER,read-only,,current,false(0):true(1),Indicates if PoE is enabled for this interface.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.5,G6-LLDP-MIB::receivedPoeControlPairControl,INTEGER,read-only,,current,false(0):true(1),Indicates if the pair selection can be controlled on the given port
.1.3.6.1.4.1.3181.10.6.2.43.106.1.6,G6-LLDP-MIB::receivedPoeControlPowerPairs,INTEGER,read-only,,current,signal(1):spare(2),Indicates which pins of the plug are used for power.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.7,G6-LLDP-MIB::receivedPoeControlPowerClass,INTEGER,read-only,,current,noClass(0):class0(1):class1(2):class2(3):class3(4):class4(5),Required PoE class.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.8,G6-LLDP-MIB::receivedPoeControlDeviceType,Integer32,read-only,,current,,Type of PoE equipment.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.9,G6-LLDP-MIB::receivedPoeControlSource,INTEGER,read-only,,current,unknown(0):pdPsePrimary(1):pdLocalBackup(2):pdPseLocal(3),Indicates the power source.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.10,G6-LLDP-MIB::receivedPoeControlPriority,INTEGER,read-only,,current,unknown(0):critical(1):high(2):low(3),Priority of the attached port.
.1.3.6.1.4.1.3181.10.6.2.43.106.1.11,G6-LLDP-MIB::receivedPoeControlPdRequestedPower,Integer32,read-only,,current,,PD requested power value
.1.3.6.1.4.1.3181.10.6.2.43.106.1.12,G6-LLDP-MIB::receivedPoeControlPseAllocatedPower,Integer32,read-only,,current,,PSE allocated power value
.1.3.6.1.4.1.3181.10.6.2.45,G6-RING-MIB::ring,,,,,,
.1.3.6.1.4.1.3181.10.6.2.45.1,G6-RING-MIB::configTable,,not-accessible,,current,,This section is used to configure the MICROSENS ring protocol which provides fast network redundany.
.1.3.6.1.4.1.3181.10.6.2.45.1.1,G6-RING-MIB::configEntry,,not-accessible,configIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.45.1.1.1,G6-RING-MIB::configIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.45.1.1.2,G6-RING-MIB::configName,OCTET,read-write,,current,,User defined ring name is purly informational.
.1.3.6.1.4.1.3181.10.6.2.45.1.1.3,G6-RING-MIB::configEnableRing,INTEGER,read-write,,current,disabled(0):enabled(1),Used to enable the redundant ring function.
.1.3.6.1.4.1.3181.10.6.2.45.1.1.4,G6-RING-MIB::configRingMaster,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled this unit is designated as ring master. There can only be one master in a ring.
.1.3.6.1.4.1.3181.10.6.2.45.1.1.5,G6-RING-MIB::configNumber,Integer32,read-write,,current,,Ring number must be set identical for each member of a ring. When left unassigned the default setting 1 for index 1 and 2 for index 2 is used.
.1.3.6.1.4.1.3181.10.6.2.45.1.1.6,G6-RING-MIB::configPortA,Integer32,read-write,,current,,Port number for ring side A
.1.3.6.1.4.1.3181.10.6.2.45.1.1.7,G6-RING-MIB::configPortB,Integer32,read-write,,current,,Port number for ring side B. Ring master blocks B when ring is ok
.1.3.6.1.4.1.3181.10.6.2.45.2,G6-RING-MIB::mrpConfigTable,,not-accessible,,current,,This section is used to configure the MRP ring protocol.
.1.3.6.1.4.1.3181.10.6.2.45.2.1,G6-RING-MIB::mrpConfigEntry,,not-accessible,mrpConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.45.2.1.1,G6-RING-MIB::mrpConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.45.2.1.2,G6-RING-MIB::mrpConfigEnableMrp,INTEGER,read-write,,current,disabled(0):enabled(1),Used to enable the MRP ring function. Only enable when all MRP and VLAN settings have been set. Only close cable connections of the ring when all nodes have been enabled.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.3,G6-RING-MIB::mrpConfigDomainName,OCTET,read-write,,current,,User defined ring name is purly informational.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.4,G6-RING-MIB::mrpConfigExpectedRole,INTEGER,read-write,,current,client(0):manager(1),Determines role of this node in the ring. Configure only one master per ring.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.5,G6-RING-MIB::mrpConfigReactOnLinkChange,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the manager reacts to link change messages from a client. Disable this feature only when any member of the ring does not support react on link change feature. Also known as Advanced Mode. Only applies to manager role.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.6,G6-RING-MIB::mrpConfigRecoveryTime,INTEGER,read-write,,current,recoveryTime500Ms(0):recoveryTime200Ms(1),Specifies the guaranteed maximum recovery time (i.e. Time from the fault event to the time when the network regains its required communication function). Only applies to manager role.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.7,G6-RING-MIB::mrpConfigPort1,Integer32,read-write,,current,,Port number for ring side 1
.1.3.6.1.4.1.3181.10.6.2.45.2.1.8,G6-RING-MIB::mrpConfigPort2,Integer32,read-write,,current,,Port number for ring side 2. Ring master blocks B when ring is ok
.1.3.6.1.4.1.3181.10.6.2.45.2.1.9,G6-RING-MIB::mrpConfigVlanId,Integer32,read-write,,current,,When using a VLAN ensure that the rings ports are configured as member of the VLAN in the vlan settings. Leave this field blank or set to 0 when no VLAN is used.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.10,G6-RING-MIB::mrpConfigResetRoundTripDelays,OCTET,read-write,,current,,When executed the min_round_trip_delay and max_round_trip_delay values are reset to 0. This has no service implications.
.1.3.6.1.4.1.3181.10.6.2.45.2.1.11,G6-RING-MIB::mrpConfigResetStatistics,OCTET,read-write,,current,,When executed statistics related to this MRP ring are cleared. This has no service implications.
.1.3.6.1.4.1.3181.10.6.2.45.100,G6-RING-MIB::statusTable,,not-accessible,,current,,Status values display the current condition of the ring network.
.1.3.6.1.4.1.3181.10.6.2.45.100.1,G6-RING-MIB::statusEntry,,not-accessible,statusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.45.100.1.1,G6-RING-MIB::statusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.45.100.1.2,G6-RING-MIB::statusState,INTEGER,read-only,,current,unused(0):normal(1):backup(2):error(3):misconfigured(4),
.1.3.6.1.4.1.3181.10.6.2.45.100.1.3,G6-RING-MIB::statusLastStateChange,OCTET,read-only,,current,,Time and date string indication when the state of the ring protocol has last changed to the state now indicated.
.1.3.6.1.4.1.3181.10.6.2.45.100.1.4,G6-RING-MIB::statusRingInterrupt,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.100.1.5,G6-RING-MIB::statusGlobalRingAlarm,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.100.1.6,G6-RING-MIB::statusErrorDetected,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.100.1.7,G6-RING-MIB::statusRingPortAInterrupted,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.100.1.8,G6-RING-MIB::statusRingPortBInterrupted,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.101,G6-RING-MIB::statisticsTable,,not-accessible,,current,,Statistics of the ring network performance.
.1.3.6.1.4.1.3181.10.6.2.45.101.1,G6-RING-MIB::statisticsEntry,,not-accessible,statisticsIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.45.101.1.1,G6-RING-MIB::statisticsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.45.101.1.2,G6-RING-MIB::statisticsNumberOfBackups,Unsigned32,read-only,,current,,Counts the number of backups engaged since the last power up.
.1.3.6.1.4.1.3181.10.6.2.45.101.1.3,G6-RING-MIB::statisticsCurrentBackupDuration,Counter32,read-only,,current,,Indicates since how long a currently active backup is established. When no backup is active a 0 is displayed.
.1.3.6.1.4.1.3181.10.6.2.45.101.1.4,G6-RING-MIB::statisticsLastBackupDuration,Counter32,read-only,,current,,Indicates since how long the last backup was established. Indicates 0 if there was no backup since last reboot.
.1.3.6.1.4.1.3181.10.6.2.45.101.1.5,G6-RING-MIB::statisticsTotalBackupDuration,Counter32,read-only,,current,,Total time the ring was in backup since last reboot. 
.1.3.6.1.4.1.3181.10.6.2.45.102,G6-RING-MIB::couplingStatusTable,,not-accessible,,current,,Indicates status of ring coupling function. 
.1.3.6.1.4.1.3181.10.6.2.45.102.1,G6-RING-MIB::couplingStatusEntry,,not-accessible,couplingStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.45.102.1.1,G6-RING-MIB::couplingStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.45.102.1.2,G6-RING-MIB::couplingStatusControllerState,INTEGER,read-only,,current,disabled(0):blocking(1):link(2):forwarding(3):standby(4),Data transmission state.
.1.3.6.1.4.1.3181.10.6.2.45.102.1.3,G6-RING-MIB::couplingStatusCportLink,INTEGER,read-only,,current,false(0):true(1),Coupling port is in linkup condition.
.1.3.6.1.4.1.3181.10.6.2.45.102.1.4,G6-RING-MIB::couplingStatusCportForward,INTEGER,read-only,,current,false(0):true(1),Coupling port is in forwarding state.
.1.3.6.1.4.1.3181.10.6.2.45.102.1.5,G6-RING-MIB::couplingStatusCportTimeout,INTEGER,read-only,,current,false(0):true(1),Indicates that no ring coupling frames were received within defined period.
.1.3.6.1.4.1.3181.10.6.2.45.102.1.6,G6-RING-MIB::couplingStatusConnectionValid,INTEGER,read-only,,current,false(0):true(1),Indicates that source ip address of received frame matches configured partner ip.
.1.3.6.1.4.1.3181.10.6.2.45.102.1.7,G6-RING-MIB::couplingStatusValidPartnerIp,INTEGER,read-only,,current,false(0):true(1),Indicates that received ring number matches expected locally configured ring number.
.1.3.6.1.4.1.3181.10.6.2.45.102.1.8,G6-RING-MIB::couplingStatusValidPartnerId,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.103,G6-RING-MIB::mrpStatusTable,,not-accessible,,current,,Indicates status of ring coupling function. 
.1.3.6.1.4.1.3181.10.6.2.45.103.1,G6-RING-MIB::mrpStatusEntry,,not-accessible,mrpStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.45.103.1.1,G6-RING-MIB::mrpStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.45.103.1.2,G6-RING-MIB::mrpStatusAdminRole,INTEGER,read-only,,current,undefined(0):client(1):manager(2),Mirrors expected role configuration.
.1.3.6.1.4.1.3181.10.6.2.45.103.1.3,G6-RING-MIB::mrpStatusOperationalRole,INTEGER,read-only,,current,undefined(0):client(1):manager(2),real_role ??
.1.3.6.1.4.1.3181.10.6.2.45.103.1.4,G6-RING-MIB::mrpStatusPortAState,INTEGER,read-only,,current,unused(0):blocking(1):forwarding(3):notConnected(4),
.1.3.6.1.4.1.3181.10.6.2.45.103.1.5,G6-RING-MIB::mrpStatusPortBState,INTEGER,read-only,,current,unused(0):blocking(1):forwarding(3):notConnected(4),
.1.3.6.1.4.1.3181.10.6.2.45.103.1.6,G6-RING-MIB::mrpStatusDomainId,OCTET,read-only,,current,,When left blank the default id of all bits 1 is used.
.1.3.6.1.4.1.3181.10.6.2.45.103.1.7,G6-RING-MIB::mrpStatusDomainState,INTEGER,read-only,,current,disabled(0):ok(1):ringOpen(2),Operational status of the MRP entity.
.1.3.6.1.4.1.3181.10.6.2.45.103.1.8,G6-RING-MIB::mrpStatusDomainError,INTEGER,read-only,,current,disabled(0):noError(1):invalidVlan(2):invalid(3):multiMgr(4):singleSide(5):linkError(6),
.1.3.6.1.4.1.3181.10.6.2.45.103.1.9,G6-RING-MIB::mrpStatusDomainBlocked,INTEGER,read-only,,current,false(0):true(1),
.1.3.6.1.4.1.3181.10.6.2.45.103.1.10,G6-RING-MIB::mrpStatusManagerPriority,Unsigned32,read-only,,current,,The priority of this MRP entity.
.1.3.6.1.4.1.3181.10.6.2.45.103.1.11,G6-RING-MIB::mrpStatusRingOpenCount,Unsigned32,read-only,,current,,Counts how many times was the ring broken.
.1.3.6.1.4.1.3181.10.6.2.45.103.1.12,G6-RING-MIB::mrpStatusLastRingOpenTimeStamp,Counter32,read-only,,current,,Indicates at which time the ring was was broken.
.1.3.6.1.4.1.3181.10.6.2.45.103.1.13,G6-RING-MIB::mrpStatusMaxRoundTripDelay,Unsigned32,read-only,,current,,The longest round trip delay that was measured since value reset. Value in microseconds
.1.3.6.1.4.1.3181.10.6.2.45.103.1.14,G6-RING-MIB::mrpStatusMinRoundTripDelay,Unsigned32,read-only,,current,,The shortest round trip delay that was measured since value reset. Value in microseconds
.1.3.6.1.4.1.3181.10.6.2.46,G6-PACC-MIB::pacc,,,,,,
.1.3.6.1.4.1.3181.10.6.2.46.1,G6-PACC-MIB::paccEnablePortAccessControl,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enables the port access control function.
.1.3.6.1.4.1.3181.10.6.2.46.2,G6-PACC-MIB::paccReauthenticationPeriod,Unsigned32,read-write,,current,,EAP reauthentication period in seconds. To disable reauthentication set value to 0.
.1.3.6.1.4.1.3181.10.6.2.46.3,G6-PACC-MIB::paccNasIdentifier,OCTET,read-write,,current,,Optional NAS-Identifier string for RADIUS messages.
.1.3.6.1.4.1.3181.10.6.2.46.4,G6-PACC-MIB::paccMacSeparatorChar,OCTET,read-write,,current,,Defines the character which separates the bytes of a MAC address.
.1.3.6.1.4.1.3181.10.6.2.46.5,G6-PACC-MIB::paccMacSpelling,INTEGER,read-write,,current,lowerCase(0):upperCase(1),Defines in which case the MAC is defined.
.1.3.6.1.4.1.3181.10.6.2.46.6,G6-PACC-MIB::paccMacPasswordSource,INTEGER,read-write,,current,useMac(0):usePassword(1),Defines if MAC or Password is used for authentication.
.1.3.6.1.4.1.3181.10.6.2.46.7,G6-PACC-MIB::paccMacPasswordString,OCTET,read-write,,current,,User defined password string.
.1.3.6.1.4.1.3181.10.6.2.46.8,G6-PACC-MIB::paccPrimaryAuthServerName,OCTET,read-write,,current,,Symbolic name of the RADIUS server used for authentication.
.1.3.6.1.4.1.3181.10.6.2.46.9,G6-PACC-MIB::paccPrimaryAcctServerName,OCTET,read-write,,current,,Symbolic name of the RADIUS server used for accounting.
.1.3.6.1.4.1.3181.10.6.2.46.10,G6-PACC-MIB::paccFallbackAuthServerName,OCTET,read-write,,current,,Symbolic name of the RADIUS server used for authentication if the primary server is down. Leave empty when no fallback is required.
.1.3.6.1.4.1.3181.10.6.2.46.11,G6-PACC-MIB::paccFallbackAcctServerName,OCTET,read-write,,current,,Symbolic name of the RADIUS server used for accounting if the primary server is down. Leave empty when no fallback is required.
.1.3.6.1.4.1.3181.10.6.2.46.12,G6-PACC-MIB::paccServerDownTimeout,Integer32,read-write,,current,,Retry interval in seconds for trying to return to the primary RADIUS server.
.1.3.6.1.4.1.3181.10.6.2.46.13,G6-PACC-MIB::paccFilterAuthorizedMac,OCTET,read-write,,current,,Filter user_status table to show only entries for specified MAC. Supply MAC address as parameter. Enter only the first 3 value pairs of the MAC to search for vendor MACs. Syntax example: mac.filter_mac = 01:22:3A.
.1.3.6.1.4.1.3181.10.6.2.46.14,G6-PACC-MIB::paccFilterAuthorizedPort,OCTET,read-write,,current,,Filter user_status table to show only entries associated with a given port range. The shorthand port format like 1 for 1/1 may be used. Syntax examples: mac.filter_port = 1/1,2/5 or mac.filter_port = 1-3,5. 
.1.3.6.1.4.1.3181.10.6.2.46.15,G6-PACC-MIB::paccFilterAuthorizedUser,OCTET,read-write,,current,,Filter user_status table to show only entries for the given user name. Wildcards *name* automatically apply so that only a part of the expected name needs to be supplied.
.1.3.6.1.4.1.3181.10.6.2.46.16,G6-PACC-MIB::portConfigTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.2.46.16.1,G6-PACC-MIB::portConfigEntry,,not-accessible,portConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.16.1.1,G6-PACC-MIB::portConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.16.1.2,G6-PACC-MIB::portConfigAuthorizeMode,INTEGER,read-write,,current,alwaysAuthorized(0):viaMacTable(1):macViaRadius(2):ms8021xViaRadius(3):macOr8021xViaRadius(4):forceUnauthorized(5):macEventOnly(6):edge8021xViaRadius(7),Defines method for authorization of user on port.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.3,G6-PACC-MIB::portConfigAuthorizePriority,INTEGER,read-write,,current,prefer8021x(0):preferMac(1),When two methods provide positive authorization, then this parameter decides which method is used.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.4,G6-PACC-MIB::portConfigUnauthorizedMode,INTEGER,read-write,,current,blocked(0):useUnauthorizedVlan(1):incomingBlocked(2),Defines how unauthorized ports are treated.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.5,G6-PACC-MIB::portConfigAuthFailRetryTimer,Unsigned32,read-write,,current,,When authentication has failed, the authentication is restarted after the defined time in seconds. This is useful for unattended devices using MAC authentication or when access rights are centrally changed on the RADIUS server and the end unit cannot be reauthenticated manually. The default value of 0 disables the automatic retry.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.6,G6-PACC-MIB::portConfigMacTimeout,INTEGER,read-write,,current,none(0):slow(1):fast(2),Defines how long authorized MACs remain authorized after inactivity of the MAC.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.7,G6-PACC-MIB::portConfigLimitedNumberOfMacs,Integer32,read-write,,current,,Limit the number of permitted MACs on the port. Set to 0 for normal unlimited operation. This feature is independend of the authorized_mac function.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.8,G6-PACC-MIB::portConfigDropUnknownUnicasts,INTEGER,read-write,,current,disabled(0):enabled(1),When set only unicast frames with learned or known MAC address will be send out of this port.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.9,G6-PACC-MIB::portConfigDropEgressBroadcasts,INTEGER,read-write,,current,disabled(0):enabled(1),When set no broadcast frames with egress this port.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.10,G6-PACC-MIB::portConfigLearnMacNow,OCTET,read-write,,current,,Learn the next incoming MAC(s) of this port and enter them into the mac_table. Syntax: learn_mac_now = 3 will learn the next 3 MAC addresses. Use pacc.port_status.number_of_learned_macs to verify progress. Type learn_mac_now = 0 to cancel further learning.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.11,G6-PACC-MIB::portConfigReauthenticate,OCTET,read-write,,current,,This action forces re-authentication of the port using the configured method. No parameter required.
.1.3.6.1.4.1.3181.10.6.2.46.16.1.12,G6-PACC-MIB::portConfigUnauthorizeMac,OCTET,read-write,,current,,This action will unauthorize a specific MAC. When no MAC is specified, the entire port is unauthorized.
.1.3.6.1.4.1.3181.10.6.2.46.17,G6-PACC-MIB::authorizedMacsTable,,not-accessible,,current,,This table defines statically permitted MACs that do not require the device to perform any further authorization process.
.1.3.6.1.4.1.3181.10.6.2.46.17.1,G6-PACC-MIB::authorizedMacsEntry,,not-accessible,authorizedMacsIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.17.1.1,G6-PACC-MIB::authorizedMacsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.17.1.2,G6-PACC-MIB::authorizedMacsName,OCTET,read-write,,current,,Unique name to reference this entry and to remember whose MAC address is entered.
.1.3.6.1.4.1.3181.10.6.2.46.17.1.3,G6-PACC-MIB::authorizedMacsMacAddress,OCTET,read-write,,current,,MAC address of authorized user for port.
.1.3.6.1.4.1.3181.10.6.2.46.17.1.4,G6-PACC-MIB::authorizedMacsPermittedPorts,INTEGER,read-write,,current,,Mask which defines at which port(s) this MAC is permitted. A value of 0 disables this entry. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
.1.3.6.1.4.1.3181.10.6.2.46.17.1.5,G6-PACC-MIB::authorizedMacsTreatAsVendorMac,INTEGER,read-write,,current,disabled(0):enabled(1),When set, the MAC is treated as vendor MAC. All MACs from this vendor are permitted then.
.1.3.6.1.4.1.3181.10.6.2.46.18,G6-PACC-MIB::supplicantTable,,not-accessible,,current,,The 802.1x supplicant permits automatic login when a port is activated.
.1.3.6.1.4.1.3181.10.6.2.46.18.1,G6-PACC-MIB::supplicantEntry,,not-accessible,supplicantIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.18.1.1,G6-PACC-MIB::supplicantIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.18.1.2,G6-PACC-MIB::supplicantEnableSupplicant,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enables the 802.1x supplicant function.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.3,G6-PACC-MIB::supplicantPort,Integer32,read-write,,current,,Port through which the authorizing authority is reached. Usually this is the link port.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.4,G6-PACC-MIB::supplicantActionOnLinkDown,INTEGER,read-write,,current,none(0):deauthenticate(1),When the supplicant link goes down, the local authenticated user ports can be deauthenticated as well.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.5,G6-PACC-MIB::supplicantIdentity,OCTET,read-write,,current,,Inner identity for tunneled EAP methods (e.g. EAP-TTLS)
.1.3.6.1.4.1.3181.10.6.2.46.18.1.6,G6-PACC-MIB::supplicantAnonymousIdentity,OCTET,read-write,,current,,Identity string for EAP-MD5. Also used as the unencrypted anonymous outer identity with EAP types that support different tunneled identity, e.g. EAP-TTLS.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.7,G6-PACC-MIB::supplicantAuthenticationProtocol,OCTET,read-write,,current,,Space-separated list of accepted EAP methods. If not set, all listed methods are allowed. MD5 = insecure and does not generate keying material to be used as a Phase 2 method withPEAP or TTLS. PEAP = with tunneled EAP authentication. TTLS = with tunneled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 authentication. TLS = client and server certificate.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.8,G6-PACC-MIB::supplicantEnterPassword,OCTET,read-write,,current,,Set a new authentication password which replaces the previous one. Note: trailing spaces or multiple spaces in the password are automatically removed.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.9,G6-PACC-MIB::supplicantEncryptedAuthPassword,OCTET,read-write,,current,,The encrypted EAP password. Can be set with enter_password action.
.1.3.6.1.4.1.3181.10.6.2.46.18.1.10,G6-PACC-MIB::supplicantReauthenticate,OCTET,read-write,,current,,Restarts the authentication process for testing and display the results.
.1.3.6.1.4.1.3181.10.6.2.46.100,G6-PACC-MIB::portStatusTable,,not-accessible,,current,,This table indicates the current port autentication state and contains the data for the last user or MAC that tried to authorize on a given port. To see all users in a multiuser environment refer to user_status table.
.1.3.6.1.4.1.3181.10.6.2.46.100.1,G6-PACC-MIB::portStatusEntry,,not-accessible,portStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.100.1.1,G6-PACC-MIB::portStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.100.1.2,G6-PACC-MIB::portStatusAuthorizationState,INTEGER,read-only,,current,undefined(0):disabled(1):unauthorized(2):processing(3):authorized(4):rejected(5),Indicates the port access control state.
.1.3.6.1.4.1.3181.10.6.2.46.100.1.3,G6-PACC-MIB::portStatusAuthorizationMode,INTEGER,read-only,,current,none(0):viaMacTable(1):macViaRadius(2):ms8021xViaRadius(3):viaMacEventOnly(6):edge8021xViaRadius(7),Last authorization method applied on this port.
.1.3.6.1.4.1.3181.10.6.2.46.100.1.4,G6-PACC-MIB::portStatusLastStateChange,OCTET,read-only,,current,,Indicates the last time the authorization state of this port was modified.
.1.3.6.1.4.1.3181.10.6.2.46.100.1.5,G6-PACC-MIB::portStatusNumberOfMacsToLearn,Integer32,read-only,,current,,Indicates how many MAC addresses will be learned. This is a result of the learn_macs_now action command.
.1.3.6.1.4.1.3181.10.6.2.46.100.1.6,G6-PACC-MIB::portStatusNumberOfLearnedMacs,Integer32,read-only,,current,,This value indicates how many MAC addresses have actually been learned since the learn_macs_now command had been issued.
.1.3.6.1.4.1.3181.10.6.2.46.101,G6-PACC-MIB::portMacStatusTable,,not-accessible,,current,,This table indicates the current port autentication state and contains the data for the last user or MAC that tried to authorize on a given port. To see all users in a multiuser environment refer to user_status table.
.1.3.6.1.4.1.3181.10.6.2.46.101.1,G6-PACC-MIB::portMacStatusEntry,,not-accessible,portMacStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.101.1.1,G6-PACC-MIB::portMacStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.101.1.2,G6-PACC-MIB::portMacStatusAuthorizationState,INTEGER,read-only,,current,undefined(0):disabled(1):unauthorized(2):processing(3):authorized(4):rejected(5),Indicates the port access control state.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.3,G6-PACC-MIB::portMacStatusUserMac,OCTET,read-only,,current,,Last MAC that attempted authorization.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.4,G6-PACC-MIB::portMacStatusUserName,OCTET,read-only,,current,,Last user that attempted authorization unless MAC authentication was used in which case this field is blank.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.5,G6-PACC-MIB::portMacStatusVlanAlias,OCTET,read-only,,current,,Last dynamically through radius assigned VLAN alias.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.6,G6-PACC-MIB::portMacStatusVlanId,Integer32,read-only,,current,,Last dynamically through radius assigned VLAN.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.7,G6-PACC-MIB::portMacStatusIdleTimeout,Integer32,read-only,,current,,This value reflects the idle timeout setting as received via RADIUS. It sets the maximum number of seconds before an idle session is terminated.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.8,G6-PACC-MIB::portMacStatusSessionTimeout,Integer32,read-only,,current,,This value reflects the session timeout setting as received via RADIUS. It sets the maximum number of seconds of service to be provided to the user before the session is terminated.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.9,G6-PACC-MIB::portMacStatusFilterId,OCTET,read-only,,current,,If the RADIUS attribute filter-id is used its value is reflected here.
.1.3.6.1.4.1.3181.10.6.2.46.101.1.10,G6-PACC-MIB::portMacStatusLastStateChange,OCTET,read-only,,current,,Indicates the last time the authorization state of this port was modified.
.1.3.6.1.4.1.3181.10.6.2.46.102,G6-PACC-MIB::port8021xStatusTable,,not-accessible,,current,,This table indicates the current port autentication state and contains the data for the last user or MAC that tried to authorize on a given port. To see all users in a multiuser environment refer to user_status table.
.1.3.6.1.4.1.3181.10.6.2.46.102.1,G6-PACC-MIB::port8021xStatusEntry,,not-accessible,port8021xStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.102.1.1,G6-PACC-MIB::port8021xStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.102.1.2,G6-PACC-MIB::port8021xStatusAuthorizationState,INTEGER,read-only,,current,undefined(0):disabled(1):unauthorized(2):processing(3):authorized(4):rejected(5),Indicates the port access control state.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.3,G6-PACC-MIB::port8021xStatusUserMac,OCTET,read-only,,current,,Last MAC that attempted authorization.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.4,G6-PACC-MIB::port8021xStatusUserName,OCTET,read-only,,current,,Last user that attempted authorization unless MAC authentication was used in which case this field is blank.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.5,G6-PACC-MIB::port8021xStatusVlanAlias,OCTET,read-only,,current,,Last dynamically through radius assigned VLAN alias.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.6,G6-PACC-MIB::port8021xStatusVlanId,Integer32,read-only,,current,,Last dynamically through radius assigned VLAN.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.7,G6-PACC-MIB::port8021xStatusIdleTimeout,Integer32,read-only,,current,,This value reflects the idle timeout setting as received via RADIUS. It sets the maximum number of seconds before an idle session is terminated.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.8,G6-PACC-MIB::port8021xStatusSessionTimeout,Integer32,read-only,,current,,This value reflects the session timeout setting as received via RADIUS. It sets the maximum number of seconds of service to be provided to the user before the session is terminated.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.9,G6-PACC-MIB::port8021xStatusFilterId,OCTET,read-only,,current,,If the RADIUS attribute filter-id is used its value is reflected here.
.1.3.6.1.4.1.3181.10.6.2.46.102.1.10,G6-PACC-MIB::port8021xStatusLastStateChange,OCTET,read-only,,current,,Indicates the last time the authorization state of this port was modified.
.1.3.6.1.4.1.3181.10.6.2.46.103,G6-PACC-MIB::userStatusTable,,not-accessible,,current,,This table lists all users authorized or rejected via some form of port access control. Use filter actions for easier viewing.
.1.3.6.1.4.1.3181.10.6.2.46.103.1,G6-PACC-MIB::userStatusEntry,,not-accessible,userStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.46.103.1.1,G6-PACC-MIB::userStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.46.103.1.2,G6-PACC-MIB::userStatusEntryState,INTEGER,read-only,,current,unused(0):inactive(1):active(2),Indicates if this record displays a currently active login or a history entry of a previous authentication which is invalidated by now.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.3,G6-PACC-MIB::userStatusAuthorizationState,INTEGER,read-only,,current,undefined(0):disabled(1):unauthorized(2):processing(3):authorized(4):rejected(5),Indicates the port access control state resulting from this authorization attempt .
.1.3.6.1.4.1.3181.10.6.2.46.103.1.4,G6-PACC-MIB::userStatusAuthorizationMode,INTEGER,read-only,,current,none(0):viaMacTable(1):macViaRadius(2):ms8021xViaRadius(3):viaMacEventOnly(6):edge8021xViaRadius(7),Authorization method used for this authorization attempt.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.5,G6-PACC-MIB::userStatusPort,Integer32,read-only,,current,,Indicates the port at which this MAC is connected.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.6,G6-PACC-MIB::userStatusUserMac,OCTET,read-only,,current,,MAC used for this authorization attempt.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.7,G6-PACC-MIB::userStatusUserName,OCTET,read-only,,current,,User that attempted authorization unless MAC authentication was used in which case this field is blank.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.8,G6-PACC-MIB::userStatusVlanAlias,OCTET,read-only,,current,,Dynamically through radius assigned VLAN alias.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.9,G6-PACC-MIB::userStatusVlanId,Integer32,read-only,,current,,Dynamically through radius assigned VLAN.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.10,G6-PACC-MIB::userStatusIdleTimeout,Integer32,read-only,,current,,This value reflects the idle timeout setting as received via RADIUS. It sets the maximum number of seconds before an idle session is terminated.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.11,G6-PACC-MIB::userStatusSessionTimeout,Integer32,read-only,,current,,This value reflects the session timeout setting as received via RADIUS. It sets the maximum number of seconds of service to be provided to the user before the session is terminated.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.12,G6-PACC-MIB::userStatusFilterId,OCTET,read-only,,current,,If the RADIUS attribute filter-id is used its value is reflected here.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.13,G6-PACC-MIB::userStatusLoginTimeStamp,OCTET,read-only,,current,,Indicates the time when this record was created.
.1.3.6.1.4.1.3181.10.6.2.46.103.1.14,G6-PACC-MIB::userStatusLoginEpoch,Unsigned32,read-only,,current,,Indicates the time when this record was created. in Linux time since the epoch format.
.1.3.6.1.4.1.3181.10.6.2.49,G6-DHCP-MIB::dhcp,,,,,,
.1.3.6.1.4.1.3181.10.6.2.49.1,G6-DHCP-MIB::dhcpEnableDhcpRelay,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of dhcp relay function.
.1.3.6.1.4.1.3181.10.6.2.49.2,G6-DHCP-MIB::dhcpEnableDhcpSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of dhcp snooping function.
.1.3.6.1.4.1.3181.10.6.2.49.3,G6-DHCP-MIB::dhcpEnablePppoeSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of PPPoE snooping also known as PPPoE Intermediate Agent function.
.1.3.6.1.4.1.3181.10.6.2.49.4,G6-DHCP-MIB::dhcpEnableArpInspection,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of arp inspection function.
.1.3.6.1.4.1.3181.10.6.2.49.5,G6-DHCP-MIB::dhcpUnblockPort,OCTET,read-write,,current,,This function may be used to unblock a port that has been set to blocking state due to DHCP flooding or due to ARP storm detection. The shorthand port format like 1 for 1/1 may be used. Syntax examples: dhcp.unblock_port = 1/2,1/5 or dhcp.unblock_port = 1/1-1/4. Also the syntax .. = 0-5 to unblock the first 6 ports is supported.
.1.3.6.1.4.1.3181.10.6.2.49.6,G6-DHCP-MIB::dhcpClearSnoopingTable,OCTET,read-write,,current,,This function may be used to clear the content of the DHCP snooping table.
.1.3.6.1.4.1.3181.10.6.2.49.7,G6-DHCP-MIB::relayConfigTable,,not-accessible,,current,,This configures the DHCP relay option 82. It can be used to supply information from which port a DHCP request came in order to supply an IP based on the physical location of the requestor.
.1.3.6.1.4.1.3181.10.6.2.49.7.1,G6-DHCP-MIB::relayConfigEntry,,not-accessible,relayConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.7.1.1,G6-DHCP-MIB::relayConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.7.1.2,G6-DHCP-MIB::relayConfigDhcpServerAddress,OCTET,read-write,,current,,Defines host address or network address where the dhcp server(s) resides. Also known as ip_helper_address.
.1.3.6.1.4.1.3181.10.6.2.49.7.1.3,G6-DHCP-MIB::relayConfigRemoteIdSource,INTEGER,read-write,,current,hostname(0):macAddress(1):sysName(2):userDefined(3):portAlias(4),Defines how the switch is identified when DHCP option 82 is used. (Suboption2)
.1.3.6.1.4.1.3181.10.6.2.49.7.1.4,G6-DHCP-MIB::relayConfigCustomRemoteId,OCTET,read-write,,current,,This remote id is used for option 82 when 'remote_id_source' is set to USER_DEFINED.
.1.3.6.1.4.1.3181.10.6.2.49.7.1.5,G6-DHCP-MIB::relayConfigCircuitIdSource,INTEGER,read-write,,current,snmpPortId(0):slotPortId(1):portAlias(2):ipSlotPortVlan(3),Defines how the ports are identified when option 82 is used. (Suboption1)
.1.3.6.1.4.1.3181.10.6.2.49.8,G6-DHCP-MIB::relayPortConfigTable,,not-accessible,,current,,This configures the DHCP relay option 82. It can be used to supply information from which port a DHCP request came in order to supply an IP based on the physical location of the requestor.
.1.3.6.1.4.1.3181.10.6.2.49.8.1,G6-DHCP-MIB::relayPortConfigEntry,,not-accessible,relayPortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.8.1.1,G6-DHCP-MIB::relayPortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.8.1.2,G6-DHCP-MIB::relayPortConfigEnableDhcpRelay,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled incoming DHCP requests are redirected to the dhcp server or network specified in 'dhcp.relay_config'
.1.3.6.1.4.1.3181.10.6.2.49.8.1.3,G6-DHCP-MIB::relayPortConfigEnableOption82,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled incoming DHCP requests are modified in 'dhcp.relay_config'
.1.3.6.1.4.1.3181.10.6.2.49.9,G6-DHCP-MIB::snoopingPortConfigTable,,not-accessible,,current,,This configures the DHCP snooping function. DHCP snooping acts like a DHCP firewall between access and link ports. When enabled it ensures that for untrusted ports only DHCP requests are accepted. This prevents malicious users from injecting fake DHCP frames and thus invalid IP addresses.
.1.3.6.1.4.1.3181.10.6.2.49.9.1,G6-DHCP-MIB::snoopingPortConfigEntry,,not-accessible,snoopingPortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.9.1.1,G6-DHCP-MIB::snoopingPortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.9.1.2,G6-DHCP-MIB::snoopingPortConfigEnableDhcpSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),This enables the DHCP snooping function per port.
.1.3.6.1.4.1.3181.10.6.2.49.9.1.3,G6-DHCP-MIB::snoopingPortConfigDhcpFiltering,INTEGER,read-write,,current,disabled(0):dropAndEvent(1):blockAndEvent(2),DHCP filtering prevents DHCP responses being injected from a local access port. It acts like a DHCP firewall between access and link ports.
.1.3.6.1.4.1.3181.10.6.2.49.9.1.4,G6-DHCP-MIB::snoopingPortConfigSnoopingTrust,INTEGER,read-write,,current,auto(0):untrusted(1):trusted(2),DHCP responses are only accepted when they ingress on a trusted port. Typically these are the link ports. AUTO uses the port role and declares all up or downlink ports as trusted.
.1.3.6.1.4.1.3181.10.6.2.49.9.1.5,G6-DHCP-MIB::snoopingPortConfigAcceptIngressOption82,INTEGER,read-write,,current,disabled(0):enabled(1),Normally incoming DHCP request incoming with Option 82 set will be discarded. When enabled then this check is ignored.
.1.3.6.1.4.1.3181.10.6.2.49.9.1.6,G6-DHCP-MIB::snoopingPortConfigMacAddressVerification,INTEGER,read-write,,current,disabled(0):enabled(1),When a packet is received on an untrusted interface, and the source MAC address and the DHCP client MAC address do not match and this feature is enabled, the packet is dropped.
.1.3.6.1.4.1.3181.10.6.2.49.9.1.7,G6-DHCP-MIB::snoopingPortConfigDhcpRateLimiting,Integer32,read-write,,current,,Defines how many DHCP request are accepted per second. When the limit is reached, DHCP flooding is assumed and the port is blocked. The value 0 disables the rate limit check.
.1.3.6.1.4.1.3181.10.6.2.49.9.1.8,G6-DHCP-MIB::snoopingPortConfigClearSnoopingStatistics,OCTET,read-write,,current,,Reset all DHCP related statistics and reason. The snooping binding table is not affected.
.1.3.6.1.4.1.3181.10.6.2.49.10,G6-DHCP-MIB::pppoeConfigTable,,not-accessible,,current,,This table defines the general parameter for PPPoE Intermediate Agent feature.
.1.3.6.1.4.1.3181.10.6.2.49.10.1,G6-DHCP-MIB::pppoeConfigEntry,,not-accessible,pppoeConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.10.1.1,G6-DHCP-MIB::pppoeConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.10.1.2,G6-DHCP-MIB::pppoeConfigVendorId,Unsigned32,read-write,,current,,Vendor identification that this device adds to a PPPoE request before forwarding it to the server.
.1.3.6.1.4.1.3181.10.6.2.49.10.1.3,G6-DHCP-MIB::pppoeConfigRemoteIdSource,INTEGER,read-write,,current,hostname(0):macAddress(1):sysName(2):userDefined(3):portAlias(4),The remote id identifies the client that requests a PPPoE connection.
.1.3.6.1.4.1.3181.10.6.2.49.10.1.4,G6-DHCP-MIB::pppoeConfigCustomRemoteId,OCTET,read-write,,current,,This field is only used in a PPPoE request when the remote_id_source is set to USER_DEFINED.
.1.3.6.1.4.1.3181.10.6.2.49.10.1.5,G6-DHCP-MIB::pppoeConfigCircuitIdSource,INTEGER,read-write,,current,snmpPortId(0):slotPortId(1):portAlias(2):ipSlotPortVlan(3),This field defines how the port on which a PPPoE request comes in is identified.
.1.3.6.1.4.1.3181.10.6.2.49.11,G6-DHCP-MIB::pppoePortConfigTable,,not-accessible,,current,,This table permits port specific enable of the PPPoE Intermediate Agent feature.
.1.3.6.1.4.1.3181.10.6.2.49.11.1,G6-DHCP-MIB::pppoePortConfigEntry,,not-accessible,pppoePortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.11.1.1,G6-DHCP-MIB::pppoePortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.11.1.2,G6-DHCP-MIB::pppoePortConfigEnablePppoeSnooping,INTEGER,read-write,,current,disabled(0):enabled(1),Enables PPPoE intermediate agent function also known as PPPoE Snooping for this port. Also observe the general enable parameter for PPPoE.
.1.3.6.1.4.1.3181.10.6.2.49.12,G6-DHCP-MIB::arpInspectionPortConfigTable,,not-accessible,,current,,This table defines the parameter for Dynamic ARP Inspection per port. These features should generally be used with untrusted ports.
.1.3.6.1.4.1.3181.10.6.2.49.12.1,G6-DHCP-MIB::arpInspectionPortConfigEntry,,not-accessible,arpInspectionPortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.12.1.1,G6-DHCP-MIB::arpInspectionPortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.12.1.2,G6-DHCP-MIB::arpInspectionPortConfigEnableArpInspection,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enables Dynamic ARP Inspection. The details need to be configured per VLAN in separate table. This feature helps preventing from man-in-the-middle attacks to the network.
.1.3.6.1.4.1.3181.10.6.2.49.12.1.3,G6-DHCP-MIB::arpInspectionPortConfigArpRateLimiting,Integer32,read-write,,current,,Defines how many ARP request are accepted per second. When the limit is reached, a DOS attack is assumed and the port is shut down. The value 0 disables the rate limit check.
.1.3.6.1.4.1.3181.10.6.2.49.12.1.4,G6-DHCP-MIB::arpInspectionPortConfigInspectionDatabase,INTEGER,read-write,,current,none(0):dhcp(1):arpAcl(2):both(3),When set to another value than NONE, the MAC-IP relationship of the incoming ARPs is verified against the selected table. This ensures that only valid MACs enter the network.
.1.3.6.1.4.1.3181.10.6.2.49.12.1.5,G6-DHCP-MIB::arpInspectionPortConfigArpAclName,OCTET,read-write,,current,,Name of the ACL (access control list) which declares which IP/MAC relations are acceptible. Note: ACLs are configured under Management.ACL. Several ACL may be specified with a comma separated list. Example acl1, otherlist
.1.3.6.1.4.1.3181.10.6.2.49.12.1.6,G6-DHCP-MIB::arpInspectionPortConfigAclDefaultLogic,INTEGER,read-write,,current,deny(0):permit(1),Defines which action is taken when none of the ACL records matches. Default is deny which blocks the ARP.
.1.3.6.1.4.1.3181.10.6.2.49.12.1.7,G6-DHCP-MIB::arpInspectionPortConfigSourceMacValidation,INTEGER,read-write,,current,disabled(0):enabled(1),Checks the source MAC address in the Ethernet header against the sender MAC address in the ARP body. This check is performed on both ARP requests and responses. Packets with different MAC addresses are dropped.
.1.3.6.1.4.1.3181.10.6.2.49.12.1.8,G6-DHCP-MIB::arpInspectionPortConfigDestMacValidation,INTEGER,read-write,,current,disabled(0):enabled(1),Checks the destination MAC address in the Ethernet header against the target MAC address in ARP body. This check is performed for ARP responses. Packets with different MAC addresses are dropped.
.1.3.6.1.4.1.3181.10.6.2.49.12.1.9,G6-DHCP-MIB::arpInspectionPortConfigIpRangeValidation,INTEGER,read-write,,current,disabled(0):enabled(1),Checks ARP for invalid addresses. Invalid addresses include 0.0.0.0, 255.255.255.255, and all IP multicast and loopback addresses. Sender IP addresses are checked in all ARP requests and responses, and target IP addresses are checked only in ARP responses.
.1.3.6.1.4.1.3181.10.6.2.49.100,G6-DHCP-MIB::snoopingStatisticsTable,,not-accessible,,current,,Statistics indicating activity of DHCP snooping.
.1.3.6.1.4.1.3181.10.6.2.49.100.1,G6-DHCP-MIB::snoopingStatisticsEntry,,not-accessible,snoopingStatisticsPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.100.1.1,G6-DHCP-MIB::snoopingStatisticsPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.100.1.2,G6-DHCP-MIB::snoopingStatisticsTrustMode,INTEGER,read-only,,current,undecided(0):untrusted(1):trusted(2),Reflects the determined trust mode.
.1.3.6.1.4.1.3181.10.6.2.49.100.1.3,G6-DHCP-MIB::snoopingStatisticsNumberOfDhcpProcessed,Unsigned32,read-only,,current,,Counts the number of dhcp messages processed.
.1.3.6.1.4.1.3181.10.6.2.49.100.1.4,G6-DHCP-MIB::snoopingStatisticsNumberOfDhcpDropped,Unsigned32,read-only,,current,,Counts the number of dhcp messages dropped.
.1.3.6.1.4.1.3181.10.6.2.49.100.1.5,G6-DHCP-MIB::snoopingStatisticsLastDropReason,INTEGER,read-only,,current,ok(0):illegalDhcpServer(1):dhcpServerSpoofed(2):illegalRelayAgent(3):bindingMismatch(4):flooding(5),
.1.3.6.1.4.1.3181.10.6.2.49.101,G6-DHCP-MIB::snoopingTableTable,,not-accessible,,current,,This table lists the MAC-IP bindings of the untrusted ports (only) as discovered through DHCP snooping.
.1.3.6.1.4.1.3181.10.6.2.49.101.1,G6-DHCP-MIB::snoopingTableEntry,,not-accessible,snoopingTableIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.49.101.1.1,G6-DHCP-MIB::snoopingTableIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.49.101.1.2,G6-DHCP-MIB::snoopingTableMac,OCTET,read-only,,current,,MAC address entry
.1.3.6.1.4.1.3181.10.6.2.49.101.1.3,G6-DHCP-MIB::snoopingTableIp,OCTET,read-only,,current,,IP address associated with this MAC.
.1.3.6.1.4.1.3181.10.6.2.49.101.1.4,G6-DHCP-MIB::snoopingTablePort,Integer32,read-only,,current,,Port number for MAC address
.1.3.6.1.4.1.3181.10.6.2.49.101.1.5,G6-DHCP-MIB::snoopingTableVlan,Integer32,read-only,,current,,if non zero this MAC is part of this VLAN.
.1.3.6.1.4.1.3181.10.6.2.49.101.1.6,G6-DHCP-MIB::snoopingTableLastUpdated,OCTET,read-only,,current,,Time stamp when this record was written
.1.3.6.1.4.1.3181.10.6.2.49.101.1.7,G6-DHCP-MIB::snoopingTableLastUpdatedEpoch,Unsigned32,read-only,,current,,Time stamp in alternate format
.1.3.6.1.4.1.3181.10.6.2.49.101.1.8,G6-DHCP-MIB::snoopingTableLeaseTime,Counter32,read-only,,current,,Lease time as reported by DHCP server
.1.3.6.1.4.1.3181.10.6.2.54,G6-LACP-MIB::lacp,,,,,,
.1.3.6.1.4.1.3181.10.6.2.54.1,G6-LACP-MIB::lacpEnableLacp,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of LACP function. 
.1.3.6.1.4.1.3181.10.6.2.54.2,G6-LACP-MIB::configTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.2.54.2.1,G6-LACP-MIB::configEntry,,not-accessible,configIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.54.2.1.1,G6-LACP-MIB::configIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.54.2.1.2,G6-LACP-MIB::configLinkAggregation,INTEGER,read-write,,current,static(0):dynamic(1),With static setting the link aggregation operates exactly on the ports defined via trunk configuration. Dynamic uses protocol between both endpoints to dynamically use as many or little links as currently available.
.1.3.6.1.4.1.3181.10.6.2.54.2.1.3,G6-LACP-MIB::configSystemPriority,Integer32,read-write,,current,,Priority associated with the system.
.1.3.6.1.4.1.3181.10.6.2.54.2.1.4,G6-LACP-MIB::configMode,INTEGER,read-write,,current,passive(0):active(1),Determines active or passive operational mode.
.1.3.6.1.4.1.3181.10.6.2.54.2.1.5,G6-LACP-MIB::configTransmitInterval,INTEGER,read-write,,current,slow(0):fast(1),Determine LACP PDU interval.
.1.3.6.1.4.1.3181.10.6.2.54.3,G6-LACP-MIB::portConfigTable,,not-accessible,,current,,Configuration parameter concerning the port specific LACP setttings
.1.3.6.1.4.1.3181.10.6.2.54.3.1,G6-LACP-MIB::portConfigEntry,,not-accessible,portConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.54.3.1.1,G6-LACP-MIB::portConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.54.3.1.2,G6-LACP-MIB::portConfigTrunkId,Integer32,read-write,,current,,All ports with the same trunk_id form a common trunk. Use trunk_id 0 for ports that do not belong to any LACP trunk. The trunk_id corresponds to the trunk_config[index].
.1.3.6.1.4.1.3181.10.6.2.54.4,G6-LACP-MIB::trunkConfigTable,,not-accessible,,current,,Each trunk is referenced by its index number.
.1.3.6.1.4.1.3181.10.6.2.54.4.1,G6-LACP-MIB::trunkConfigEntry,,not-accessible,trunkConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.54.4.1.1,G6-LACP-MIB::trunkConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.54.4.1.2,G6-LACP-MIB::trunkConfigName,OCTET,read-write,,current,,Unique name used to identify the trunk Interface.
.1.3.6.1.4.1.3181.10.6.2.54.4.1.3,G6-LACP-MIB::trunkConfigTrunkEnable,INTEGER,read-write,,current,disabled(0):enabled(1),Enables the trunk for operation. When disabled, trunk is brought down.
.1.3.6.1.4.1.3181.10.6.2.54.100,G6-LACP-MIB::portStatusTable,,not-accessible,,current,,Displays the negotiated and active settings of LACP parameters.
.1.3.6.1.4.1.3181.10.6.2.54.100.1,G6-LACP-MIB::portStatusEntry,,not-accessible,portStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.54.100.1.1,G6-LACP-MIB::portStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.54.100.1.2,G6-LACP-MIB::portStatusTrunkName,OCTET,read-only,,current,,Name of the trunk to which port is associated.
.1.3.6.1.4.1.3181.10.6.2.54.100.1.3,G6-LACP-MIB::portStatusTrunkId,Integer32,read-only,,current,,interface index value of the trunk to which port is attached.
.1.3.6.1.4.1.3181.10.6.2.54.100.1.4,G6-LACP-MIB::portStatusActivityMode,INTEGER,read-only,,current,passive(0):active(1),
.1.3.6.1.4.1.3181.10.6.2.54.100.1.5,G6-LACP-MIB::portStatusSynchronized,INTEGER,read-only,,current,false(0):true(1),True when trunk is synchronized.
.1.3.6.1.4.1.3181.10.6.2.54.100.1.6,G6-LACP-MIB::portStatusAggregationPossible,INTEGER,read-only,,current,false(0):true(1),Indicates link is aggregatable or not.
.1.3.6.1.4.1.3181.10.6.2.54.100.1.7,G6-LACP-MIB::portStatusCollection,INTEGER,read-only,,current,false(0):true(1),Collection of incoming frames on this link is enabled or disabled.
.1.3.6.1.4.1.3181.10.6.2.54.100.1.8,G6-LACP-MIB::portStatusDistribution,INTEGER,read-only,,current,false(0):true(1),Distribution of outgoing frames on this link is enabled or disabled.
.1.3.6.1.4.1.3181.10.6.2.54.100.1.9,G6-LACP-MIB::portStatusExpiredState,INTEGER,read-only,,current,false(0):true(1),True indicates that the actor is in the EXPIRED state
.1.3.6.1.4.1.3181.10.6.2.54.100.1.10,G6-LACP-MIB::portStatusDefaultedState,INTEGER,read-only,,current,false(0):true(1),When true default configured operational partner information are used. If false the partner information in use has been received in a LACP PDU.
.1.3.6.1.4.1.3181.10.6.2.54.101,G6-LACP-MIB::actorStatusTable,,not-accessible,,current,,Actor specific status values.
.1.3.6.1.4.1.3181.10.6.2.54.101.1,G6-LACP-MIB::actorStatusEntry,,not-accessible,actorStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.54.101.1.1,G6-LACP-MIB::actorStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.54.101.1.2,G6-LACP-MIB::actorStatusSystemPriority,Integer32,read-only,,current,,Priority associated with the system
.1.3.6.1.4.1.3181.10.6.2.54.101.1.3,G6-LACP-MIB::actorStatusSystemId,OCTET,read-only,,current,,Mac address of the switch
.1.3.6.1.4.1.3181.10.6.2.54.101.1.4,G6-LACP-MIB::actorStatusPort,Integer32,read-only,,current,,Port number assigned by lacp which is local to LACP. 
.1.3.6.1.4.1.3181.10.6.2.54.101.1.5,G6-LACP-MIB::actorStatusPriority,Integer32,read-only,,current,,Priority assigned to the port.
.1.3.6.1.4.1.3181.10.6.2.54.101.1.6,G6-LACP-MIB::actorStatusAdminKey,Integer32,read-only,,current,,current administration key value of the port.
.1.3.6.1.4.1.3181.10.6.2.54.101.1.7,G6-LACP-MIB::actorStatusOperKey,Integer32,read-only,,current,,current operational key value of the port.
.1.3.6.1.4.1.3181.10.6.2.54.101.1.8,G6-LACP-MIB::actorStatusTransmitInterval,INTEGER,read-only,,current,slow(0):fast(1),Indicates the link partners transmit interval.
.1.3.6.1.4.1.3181.10.6.2.54.102,G6-LACP-MIB::partnerStatusTable,,not-accessible,,current,,Partner specific status values.
.1.3.6.1.4.1.3181.10.6.2.54.102.1,G6-LACP-MIB::partnerStatusEntry,,not-accessible,partnerStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.54.102.1.1,G6-LACP-MIB::partnerStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.54.102.1.2,G6-LACP-MIB::partnerStatusSystemPriority,Integer32,read-only,,current,,Priority associated with the system
.1.3.6.1.4.1.3181.10.6.2.54.102.1.3,G6-LACP-MIB::partnerStatusSystemId,OCTET,read-only,,current,,Mac address of the switch
.1.3.6.1.4.1.3181.10.6.2.54.102.1.4,G6-LACP-MIB::partnerStatusPort,Integer32,read-only,,current,,Port number assigned by lacp which is local to LACP. 
.1.3.6.1.4.1.3181.10.6.2.54.102.1.5,G6-LACP-MIB::partnerStatusPriority,Integer32,read-only,,current,,Priority assigned to the port.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.6,G6-LACP-MIB::partnerStatusAdminKey,Integer32,read-only,,current,,current administration key value of the port.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.7,G6-LACP-MIB::partnerStatusOperKey,Integer32,read-only,,current,,current operational key value of the port.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.8,G6-LACP-MIB::partnerStatusReceiveInterval,INTEGER,read-only,,current,slow(0):fast(1),Partner requesting transmission interval from actor. TRUE send PDUs for every 1 sec, FALSE every 30 secs.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.9,G6-LACP-MIB::partnerStatusActivityMode,INTEGER,read-only,,current,passive(0):active(1),
.1.3.6.1.4.1.3181.10.6.2.54.102.1.10,G6-LACP-MIB::partnerStatusSynchronized,INTEGER,read-only,,current,false(0):true(1),True when trunk is synchronized.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.11,G6-LACP-MIB::partnerStatusAggregationPossible,INTEGER,read-only,,current,false(0):true(1),Indicates link is aggregatable or not.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.12,G6-LACP-MIB::partnerStatusCollection,INTEGER,read-only,,current,false(0):true(1),Collection of incoming frames on this link is enabled or disabled.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.13,G6-LACP-MIB::partnerStatusDistribution,INTEGER,read-only,,current,false(0):true(1),Distribution of outgoing frames on this link is enabled or disabled.
.1.3.6.1.4.1.3181.10.6.2.54.102.1.14,G6-LACP-MIB::partnerStatusExpiredState,INTEGER,read-only,,current,false(0):true(1),True indicates that the actor is in the EXPIRED state
.1.3.6.1.4.1.3181.10.6.2.54.102.1.15,G6-LACP-MIB::partnerStatusDefaultedState,INTEGER,read-only,,current,false(0):true(1),When true default configured operational partner information are used. If false the partner information in use has been received in a LACP PDU.
.1.3.6.1.4.1.3181.10.6.2.82,G6-VLAN-MIB::vlan,,,,,,
.1.3.6.1.4.1.3181.10.6.2.82.1,G6-VLAN-MIB::vlanEnableVlanFiltering,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enable VLAN filtering function:
.1.3.6.1.4.1.3181.10.6.2.82.2,G6-VLAN-MIB::vlanIdConfigTable,,not-accessible,,current,,This section defines some default VLAN settings.
.1.3.6.1.4.1.3181.10.6.2.82.2.1,G6-VLAN-MIB::vlanIdConfigEntry,,not-accessible,vlanIdConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.2.1.1,G6-VLAN-MIB::vlanIdConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.2.1.2,G6-VLAN-MIB::vlanIdConfigManagementVlanId,Integer32,read-write,,current,,VLAN ID for internal management port. Packets sent by the management agent are tagged with this VLAN ID,
.1.3.6.1.4.1.3181.10.6.2.82.2.1.3,G6-VLAN-MIB::vlanIdConfigManagementPriority,INTEGER,read-write,,current,priority0(0):priority1(1):priority2(2):priority3(3):priority4(4):priority5(5):priority6(6):priority7(7),VLAN Priority for internal management port. Packets sent by the internal management agent are tagged with this priority value.
.1.3.6.1.4.1.3181.10.6.2.82.2.1.4,G6-VLAN-MIB::vlanIdConfigVoiceVlanId,Integer32,read-write,,current,,Voice VLAN ID. Special VLAN for IP phones.
.1.3.6.1.4.1.3181.10.6.2.82.2.1.5,G6-VLAN-MIB::vlanIdConfigRstpVlanId,Integer32,read-write,,current,,RSTP VLAN ID. When using single instance Spanning Tree (STP or RSTP) in combination with VLANs, all spanning tree messages are tagged with this VLAN ID. 
.1.3.6.1.4.1.3181.10.6.2.82.2.1.6,G6-VLAN-MIB::vlanIdConfigUnauthorizedVlanId,Integer32,read-write,,current,,When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN.
.1.3.6.1.4.1.3181.10.6.2.82.2.1.7,G6-VLAN-MIB::vlanIdConfigSmartofficeVlanId,Integer32,read-write,,current,,VLAN ID used for SmartOffice control traffic between director and controllers. Also used by the SmartOffice GUI.
.1.3.6.1.4.1.3181.10.6.2.82.3,G6-VLAN-MIB::portConfigTable,,not-accessible,,current,,These settings define the default VLANs per port and defines how untagged data are treated.
.1.3.6.1.4.1.3181.10.6.2.82.3.1,G6-VLAN-MIB::portConfigEntry,,not-accessible,portConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.3.1.1,G6-VLAN-MIB::portConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.3.1.2,G6-VLAN-MIB::portConfigVlanMode,INTEGER,read-write,,current,access(0):hybrid(1):trunk(2):qInQCustomer(3):qInQProvider(4),Defines how the VLAN tag of incoming and outgoing packets shall be handled on port.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.3,G6-VLAN-MIB::portConfigDefaultVlanId,Integer32,read-write,,current,,Default VLAN ID for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.4,G6-VLAN-MIB::portConfigForceDefaultVlanId,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, incoming packets with existing VLAN tag are overwritten with the default port VLAN ID.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.5,G6-VLAN-MIB::portConfigDefaultPriority,INTEGER,read-write,,current,priority0(0):priority1(1):priority2(2):priority3(3):priority4(4):priority5(5):priority6(6):priority7(7),Default priority value for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.6,G6-VLAN-MIB::portConfigPriorityOverride,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, incoming packets with existing VLAN tag are overwritten with the default priority value.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.7,G6-VLAN-MIB::portConfigUnauthorizedVlanId,Integer32,read-write,,current,,When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN. When set to 0 the global vlan_id_config.unauthorized_vlan_id parameter applies. Use this parameter to set an independend port specific unauthorized vlan.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.8,G6-VLAN-MIB::portConfigFallbackVlanId,Integer32,read-write,,current,,When using port access control with dynamic VLANs and a RADIUS server, the fallback vlan is assigned when the RADIUS server is unavailable. If this parameter is set to 0 the unauthorized vlan is used instead. If this is also 0 then the global vlan_id_config.unauthorized_vlan_id parameter applies.
.1.3.6.1.4.1.3181.10.6.2.82.3.1.9,G6-VLAN-MIB::portConfigQInQEthertype,INTEGER,read-write,,current,ox88a8(0):ox9100(1):ox9200(2):ox8100(3),Ethertype configuration only applies for vlan_mode Q_IN_Q.
.1.3.6.1.4.1.3181.10.6.2.82.4,G6-VLAN-MIB::filterConfigTable,,not-accessible,,current,,Defines the used VLANs and their associated ports.
.1.3.6.1.4.1.3181.10.6.2.82.4.1,G6-VLAN-MIB::filterConfigEntry,,not-accessible,filterConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.4.1.1,G6-VLAN-MIB::filterConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.4.1.2,G6-VLAN-MIB::filterConfigVlanId,OCTET,read-write,,current,,Defines filter table entry for this VLAN ID. This is the key value for the table. Type '=:' to edit, use index '[*] = new_vlan:' to add an entry. Edit string to nothing to delete entry.
.1.3.6.1.4.1.3181.10.6.2.82.4.1.3,G6-VLAN-MIB::filterConfigEntryMode,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled, filtering for this VLAN ID is disabled without deleting the table entry. This can be used for testing and configuration. 
.1.3.6.1.4.1.3181.10.6.2.82.4.1.4,G6-VLAN-MIB::filterConfigAlias,OCTET,read-write,,current,,User-definable name string for VLAN.
.1.3.6.1.4.1.3181.10.6.2.82.4.1.5,G6-VLAN-MIB::filterConfigMstpGroup,Integer32,read-write,,current,,All filter entries with the same mstp_group number will share an MSTP instance. A group may consist of one or many vlan entries. A value of 0 indicates that MSTP is not used for this VLAN.
.1.3.6.1.4.1.3181.10.6.2.82.4.1.6,G6-VLAN-MIB::filterConfigFabricAttachISid,Unsigned32,read-write,,current,,This parameter defines the VLAN to I-SID binding when the shortest path bridging (SPB) fabric attach feature is used.
.1.3.6.1.4.1.3181.10.6.2.82.4.1.7,G6-VLAN-MIB::filterConfigPortMembers,INTEGER,read-write,,current,,Defines port memberships for VLAN. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)
.1.3.6.1.4.1.3181.10.6.2.82.4.1.8,G6-VLAN-MIB::filterConfigManagementMembers,INTEGER,read-write,,current,none(0):cpu1(1):cpu2(2):all(3),Defines the port membership for the internal management port(s).
.1.3.6.1.4.1.3181.10.6.2.82.4.1.9,G6-VLAN-MIB::filterConfigPriorityOverride,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the priority value of packets tagged with this VLAN is overwritten with the new_priority value.
.1.3.6.1.4.1.3181.10.6.2.82.4.1.10,G6-VLAN-MIB::filterConfigNewPriority,INTEGER,read-write,,current,priority0(0):priority1(1):priority2(2):priority3(3):priority4(4):priority5(5):priority6(6):priority7(7),VLAN priority value when priority_override is enabled.
.1.3.6.1.4.1.3181.10.6.2.82.5,G6-VLAN-MIB::vlanEnableMvrp,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enable MVRP (Multiple VLAN Reservation Protocol) function. MVRP is operational on 802.1q trunk ports only.
.1.3.6.1.4.1.3181.10.6.2.82.6,G6-VLAN-MIB::mvrpPortConfigTable,,not-accessible,,current,,Configuration parameter concerning the port specific MVRP setttings.
.1.3.6.1.4.1.3181.10.6.2.82.6.1,G6-VLAN-MIB::mvrpPortConfigEntry,,not-accessible,mvrpPortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.6.1.1,G6-VLAN-MIB::mvrpPortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.6.1.2,G6-VLAN-MIB::mvrpPortConfigEnableMvrp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable MVRP (Multiple VLAN Reservation Protocol) on this port.
.1.3.6.1.4.1.3181.10.6.2.82.6.1.3,G6-VLAN-MIB::mvrpPortConfigRegistrationMode,INTEGER,read-write,,current,normal(0):fixed(1):forbidden(2),Configuration of the MVRP registration mode.
.1.3.6.1.4.1.3181.10.6.2.82.6.1.4,G6-VLAN-MIB::mvrpPortConfigJoinTimer,Unsigned32,read-write,,current,,Number of milliseconds that the interface must wait before sending MVRP PDUs.
.1.3.6.1.4.1.3181.10.6.2.82.6.1.5,G6-VLAN-MIB::mvrpPortConfigLeaveTimer,Unsigned32,read-write,,current,,Number of milliseconds that the switch retains a VLAN in the Leave state before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice the join-timer interval.
.1.3.6.1.4.1.3181.10.6.2.82.6.1.6,G6-VLAN-MIB::mvrpPortConfigLeaveallTimer,Unsigned32,read-write,,current,,Number of milliseconds between the sending of Leave All messages.
.1.3.6.1.4.1.3181.10.6.2.82.7,G6-VLAN-MIB::fabricAttachPortConfigTable,,not-accessible,,current,,Configuration parameter controling the fabric attach feature. Each port can be configured individually.
.1.3.6.1.4.1.3181.10.6.2.82.7.1,G6-VLAN-MIB::fabricAttachPortConfigEntry,,not-accessible,fabricAttachPortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.7.1.1,G6-VLAN-MIB::fabricAttachPortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.7.1.2,G6-VLAN-MIB::fabricAttachPortConfigEnableFabricAttach,INTEGER,read-write,,current,disabled(0):enabled(1),Shortest path bridging (SPB) fabric attach feature can be used to simplify configuration in an SBP enabled network. Please also generally enable the LLDP function to use this feature. When enabled the port will act as client to a fabric attach network.
.1.3.6.1.4.1.3181.10.6.2.82.7.1.3,G6-VLAN-MIB::fabricAttachPortConfigMsgAuthentication,INTEGER,read-write,,current,disabled(0):enabled(1),when enabled message authentication using the fa_auth key is used.
.1.3.6.1.4.1.3181.10.6.2.82.7.1.4,G6-VLAN-MIB::fabricAttachPortConfigEnterFaAuthKey,OCTET,read-write,,current,,Enter the fabric attach authentication keys required to access the network. No spaces are permitted.
.1.3.6.1.4.1.3181.10.6.2.82.7.1.5,G6-VLAN-MIB::fabricAttachPortConfigEncryptedFaAuthKey,OCTET,read-write,,current,,Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
.1.3.6.1.4.1.3181.10.6.2.82.100,G6-VLAN-MIB::vlanNumberOfEntries,Integer32,read-only,,current,,Number of VLAN entries in the table.
.1.3.6.1.4.1.3181.10.6.2.82.101,G6-VLAN-MIB::statusTable,,not-accessible,,current,,This table lists the status of all defined VLANs.
.1.3.6.1.4.1.3181.10.6.2.82.101.1,G6-VLAN-MIB::statusEntry,,not-accessible,statusVlanIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.101.1.1,G6-VLAN-MIB::statusVlanIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.101.1.2,G6-VLAN-MIB::statusVlanId,Integer32,read-only,,current,,VLAN identifier
.1.3.6.1.4.1.3181.10.6.2.82.101.1.3,G6-VLAN-MIB::statusTimeMark,Unsigned32,read-only,,current,,
.1.3.6.1.4.1.3181.10.6.2.82.101.1.4,G6-VLAN-MIB::statusAlias,OCTET,read-only,,current,,Contains the alias name for static entries.
.1.3.6.1.4.1.3181.10.6.2.82.101.1.5,G6-VLAN-MIB::statusPortMembers,INTEGER,read-only,,current,,Lists all ports that belong to this VLAN.
.1.3.6.1.4.1.3181.10.6.2.82.101.1.6,G6-VLAN-MIB::statusFilterDatabase,Unsigned32,read-only,,current,,filter data base
.1.3.6.1.4.1.3181.10.6.2.82.101.1.7,G6-VLAN-MIB::statusEgressPorts,INTEGER,read-only,,current,,The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
.1.3.6.1.4.1.3181.10.6.2.82.101.1.8,G6-VLAN-MIB::statusUntaggedPorts,INTEGER,read-only,,current,,The set of ports which are transmitting traffic for this VLAN as untagged frames.
.1.3.6.1.4.1.3181.10.6.2.82.101.1.9,G6-VLAN-MIB::statusFabricAttachState,INTEGER,read-only,,current,disabled(0):active(1):rejected(2),Indicates if auto attachment to the fabric was successful.
.1.3.6.1.4.1.3181.10.6.2.82.101.1.10,G6-VLAN-MIB::statusCreationMode,INTEGER,read-only,,current,filterTable(0):pacc(1):mvrp(2),Indicates by which means this VLAN entry was created.
.1.3.6.1.4.1.3181.10.6.2.82.101.1.11,G6-VLAN-MIB::statusCreationTime,Counter32,read-only,,current,,The value of system.uptime when this VLAN was created.
.1.3.6.1.4.1.3181.10.6.2.82.102,G6-VLAN-MIB::portStatusTable,,not-accessible,,current,,Port related view of the currently active VLAN setup.
.1.3.6.1.4.1.3181.10.6.2.82.102.1,G6-VLAN-MIB::portStatusEntry,,not-accessible,portStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.102.1.1,G6-VLAN-MIB::portStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.102.1.2,G6-VLAN-MIB::portStatusAssignedVlanIds,OCTET,read-only,,current,,List of all VLAN ids that are configured or dynamically assigned to this port.
.1.3.6.1.4.1.3181.10.6.2.82.102.1.3,G6-VLAN-MIB::portStatusDynamicDefaultVlanId,Integer32,read-only,,current,,Indicates the current port default VLAN. The value may change due to port authentication or configuration.
.1.3.6.1.4.1.3181.10.6.2.82.102.1.4,G6-VLAN-MIB::portStatusLastUpdateMethod,INTEGER,read-only,,current,config(0):viaMacTable(1):macViaRadius(2):ms8021xViaRadius(3),Indicates what caused the last VLAN reconfiguration.
.1.3.6.1.4.1.3181.10.6.2.82.102.1.5,G6-VLAN-MIB::portStatusLastUpdatingMac,OCTET,read-only,,current,,Indicates which MAC address, if any, was involve in changing the VLAN setting for this port last.
.1.3.6.1.4.1.3181.10.6.2.82.102.1.6,G6-VLAN-MIB::portStatusLastUpdateTime,Counter32,read-only,,current,,Indicates the time when the VLAN settings were last changed.
.1.3.6.1.4.1.3181.10.6.2.82.103,G6-VLAN-MIB::mvrpStatusTable,,not-accessible,,current,,This table lists MVRP status information.
.1.3.6.1.4.1.3181.10.6.2.82.103.1,G6-VLAN-MIB::mvrpStatusEntry,,not-accessible,mvrpStatusPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.82.103.1.1,G6-VLAN-MIB::mvrpStatusPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.82.103.1.2,G6-VLAN-MIB::mvrpStatusLastSourceMac,OCTET,read-only,,current,,The Source MAC Address of the last MVRP message received on this port.
.1.3.6.1.4.1.3181.10.6.2.82.103.1.3,G6-VLAN-MIB::mvrpStatusFailedRegistrations,Unsigned32,read-only,,current,,The total number of failed MVRP registrations, for any reason, on this port.
.1.3.6.1.4.1.3181.10.6.2.83,G6-QOS-MIB::qos,,,,,,
.1.3.6.1.4.1.3181.10.6.2.83.1,G6-QOS-MIB::qosEnableQos,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enables quality of service functions.
.1.3.6.1.4.1.3181.10.6.2.83.2,G6-QOS-MIB::configTable,,not-accessible,,current,,This section configures the base QOS settings.
.1.3.6.1.4.1.3181.10.6.2.83.2.1,G6-QOS-MIB::configEntry,,not-accessible,configPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.83.2.1.1,G6-QOS-MIB::configPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.83.2.1.2,G6-QOS-MIB::configEnable802dot1p,INTEGER,read-write,,current,disabled(0):enabled(1),Enable prioritisation of received packets based on their VLAN priority value according to IEEE 802.1p.
.1.3.6.1.4.1.3181.10.6.2.83.2.1.3,G6-QOS-MIB::configEnableDiffserv,INTEGER,read-write,,current,disabled(0):enabled(1),Enable prioritisation of received packets based on the DSCP value in their IP header.
.1.3.6.1.4.1.3181.10.6.2.83.2.1.4,G6-QOS-MIB::configPriorityScheme,INTEGER,read-write,,current,weighted(0):strict(1),Selection of prioritsation method.
.1.3.6.1.4.1.3181.10.6.2.83.2.1.5,G6-QOS-MIB::configForceDefaultPriorityQueue,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the default_priority_queue value is used for this port.
.1.3.6.1.4.1.3181.10.6.2.83.2.1.6,G6-QOS-MIB::configDefaultPriorityQueue,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default priority value for port. Received packets are handeled according to this setting if VLAN tag and IP header priority is disabled.
.1.3.6.1.4.1.3181.10.6.2.83.3,G6-QOS-MIB::ieee802dot1pPrioMappingTable,,not-accessible,,current,,Mapping of the 8 VLAN priority values on the device internal 4 queues (0-3). 802.1p mapping: Prio 0-7 on Queues 1/0/0/1/2/2/3/3.
.1.3.6.1.4.1.3181.10.6.2.83.3.1,G6-QOS-MIB::ieee802dot1pPrioMappingEntry,,not-accessible,ieee802dot1pPrioMappingIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.83.3.1.1,G6-QOS-MIB::ieee802dot1pPrioMappingIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.83.3.1.2,G6-QOS-MIB::ieee802dot1pPrioMappingTag0,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_1
.1.3.6.1.4.1.3181.10.6.2.83.3.1.3,G6-QOS-MIB::ieee802dot1pPrioMappingTag1,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_0
.1.3.6.1.4.1.3181.10.6.2.83.3.1.4,G6-QOS-MIB::ieee802dot1pPrioMappingTag2,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_0
.1.3.6.1.4.1.3181.10.6.2.83.3.1.5,G6-QOS-MIB::ieee802dot1pPrioMappingTag3,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_1
.1.3.6.1.4.1.3181.10.6.2.83.3.1.6,G6-QOS-MIB::ieee802dot1pPrioMappingTag4,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_2
.1.3.6.1.4.1.3181.10.6.2.83.3.1.7,G6-QOS-MIB::ieee802dot1pPrioMappingTag5,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_2
.1.3.6.1.4.1.3181.10.6.2.83.3.1.8,G6-QOS-MIB::ieee802dot1pPrioMappingTag6,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_3
.1.3.6.1.4.1.3181.10.6.2.83.3.1.9,G6-QOS-MIB::ieee802dot1pPrioMappingTag7,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Default value: QUEUE_3
.1.3.6.1.4.1.3181.10.6.2.83.4,G6-QOS-MIB::diffservPrioMappingTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.2.83.4.1,G6-QOS-MIB::diffservPrioMappingEntry,,not-accessible,diffservPrioMappingIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.83.4.1.1,G6-QOS-MIB::diffservPrioMappingIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.83.4.1.2,G6-QOS-MIB::diffservPrioMappingDscp,INTEGER,read-write,,current,queue0(0):queue1(1):queue2(2):queue3(3),Mapping of the 64 DiffServ Codepoints (0-63) on the device internal queues.
.1.3.6.1.4.1.3181.10.6.2.83.5,G6-QOS-MIB::rateShapingTable,,not-accessible,,current,,This section defines optional bandwidth limiting features.
.1.3.6.1.4.1.3181.10.6.2.83.5.1,G6-QOS-MIB::rateShapingEntry,,not-accessible,rateShapingPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.2.83.5.1.1,G6-QOS-MIB::rateShapingPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.2.83.5.1.2,G6-QOS-MIB::rateShapingEgressBandwidthPercent,Integer32,read-write,,current,,Limits the outgoing frame rate by extending the interframe gap. Egress rate shaping is independend of the frame type. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.3,G6-QOS-MIB::rateShapingIngressUnicastPercent,Integer32,read-write,,current,,Limits the incoming unicast frame rate. Excess unicast frames are dropped and lead to port flow control frames. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.4,G6-QOS-MIB::rateShapingIngressMulticastPercent,Integer32,read-write,,current,,Limits the incoming multicast frame rate. Excess multicast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.5,G6-QOS-MIB::rateShapingIngressBroadcastPercent,Integer32,read-write,,current,,Limits the incoming broadcast frame rate. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.6,G6-QOS-MIB::rateShapingIngressUser1Percent,Integer32,read-write,,current,,Limits the incoming frames as defined for this group. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.7,G6-QOS-MIB::rateShapingIngressUser2Percent,Integer32,read-write,,current,,Limits the incoming frames as defined for this group. Excess broadcast frames are dropped. Provide a percentage value of the selected port data rate. Set to 0 or 100 for unlimited normal operation.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.8,G6-QOS-MIB::rateShapingUser1FrameTypes,INTEGER,read-write,,current,disabled(0):arp(1):tcpControl(2):arpAndTcpCtrl(3),Select for which frame types igress rate shaping should be applied.
.1.3.6.1.4.1.3181.10.6.2.83.5.1.9,G6-QOS-MIB::rateShapingUser2FrameTypes,INTEGER,read-write,,current,disabled(0):udpData(1):tcpData(2):udpAndTcpData(3):nonUdpTcpData(4),Select for which frame types igress rate shaping should be applied and which leads to port flow control frames.
.1.3.6.1.4.1.3181.10.6.3,G6-ACCESS-MIB::management,,,,,,Microsens private MIB for Generation 6 Ethernet Switches
.1.3.6.1.4.1.3181.10.6.3.51,G6-ACL-MIB::acl,,,,,,
.1.3.6.1.4.1.3181.10.6.3.51.1,G6-ACL-MIB::aclEnableAclFiltering,INTEGER,read-write,,current,disabled(0):enabled(1),General enable of access control list operation. Note that this function need only be enabled when port filtering is used. For wifi, dhcp or arp inspection function this enable parameter is meaningless..
.1.3.6.1.4.1.3181.10.6.3.51.2,G6-ACL-MIB::activeFilterPortConfigTable,,not-accessible,,current,,This table defines the parameter for access control of incoming data.
.1.3.6.1.4.1.3181.10.6.3.51.2.1,G6-ACL-MIB::activeFilterPortConfigEntry,,not-accessible,activeFilterPortConfigPortIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.51.2.1.1,G6-ACL-MIB::activeFilterPortConfigPortIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.51.2.1.2,G6-ACL-MIB::activeFilterPortConfigEnableAclFiltering,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enables access control checking for this particular port. The details need to be configured in the list and rules tables.
.1.3.6.1.4.1.3181.10.6.3.51.2.1.3,G6-ACL-MIB::activeFilterPortConfigAclListName,OCTET,read-write,,current,,Name of the ACL (access control list) which apply to this port. Several ACL lists may be specified with a comma separated list. Example acl1, otherlist
.1.3.6.1.4.1.3181.10.6.3.51.3,G6-ACL-MIB::listTable,,not-accessible,,current,,This table is used to combine and group individual rules for easier reference.
.1.3.6.1.4.1.3181.10.6.3.51.3.1,G6-ACL-MIB::listEntry,,not-accessible,listIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.51.3.1.1,G6-ACL-MIB::listIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.51.3.1.2,G6-ACL-MIB::listName,OCTET,read-write,,current,,Unique name to reference this entry and to remember whose MAC address is entered.
.1.3.6.1.4.1.3181.10.6.3.51.3.1.3,G6-ACL-MIB::listDescription,OCTET,read-write,,current,,Enter any information required to remember what this rule is intended to do.
.1.3.6.1.4.1.3181.10.6.3.51.3.1.4,G6-ACL-MIB::listRules,OCTET,read-write,,current,,Contains the names of rules that apply to this list separated by commas. Please beware of typing errors. Example: rule1,rule2,other_rule
.1.3.6.1.4.1.3181.10.6.3.51.4,G6-ACL-MIB::rulesTable,,not-accessible,,current,,For filtering of incoming data this table defines the filter rules. The same table also applies to arp inspection. In this use this table statically defines valid MAC/IP/VLAN relationships.
.1.3.6.1.4.1.3181.10.6.3.51.4.1,G6-ACL-MIB::rulesEntry,,not-accessible,rulesIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.51.4.1.1,G6-ACL-MIB::rulesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.51.4.1.2,G6-ACL-MIB::rulesName,OCTET,read-write,,current,,Unique name to reference this entry and to remember whose MAC address is entered.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.3,G6-ACL-MIB::rulesDescription,OCTET,read-write,,current,,Enter any information required to remember what this rule is intended to do.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.4,G6-ACL-MIB::rulesMode,INTEGER,read-write,,current,unused(0):permit(1):deny(2),Use UNUSED to temporarily suspend an entry. Use ACCEPT when the matched entry should be treated as valid. Use DENY when a matched entry should be treated as invalid match.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.5,G6-ACL-MIB::rulesEtherType,Integer32,read-write,,current,,Use 2048 to match IPv4 (0x800), 34525 to match IPv6 (0x86DD). A value of 0 ignores this field. The field is also ignored for ARP inspection rules.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.6,G6-ACL-MIB::rulesProtocol,Integer32,read-write,,current,,Use 6 to specifiy tcp, 17 for udp, etc. Use to ignore the protocol field. This field is also ignored for arp inspection rules.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.7,G6-ACL-MIB::rulesVlanId,Integer32,read-write,,current,,VLAN ID for which this entry is valid. A value of 0 ignores this field.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.8,G6-ACL-MIB::rulesSourceMac,OCTET,read-write,,current,,MAC address entry.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.9,G6-ACL-MIB::rulesSourceIp,OCTET,read-write,,current,,IP address associated with the given MAC.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.10,G6-ACL-MIB::rulesSourceMask,OCTET,read-write,,current,,The mask my be used to create a valid address range.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.11,G6-ACL-MIB::rulesSourcePort,Integer32,read-write,,current,,May be used to specify a specific udp/tcp port. A value of 0 ignores this field. The field is also ignored for ARP inspection rules.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.12,G6-ACL-MIB::rulesDestinationMac,OCTET,read-write,,current,,MAC address entry. This field is ignored for ARP inspection rules.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.13,G6-ACL-MIB::rulesDestinationIp,OCTET,read-write,,current,,IP address associated with the given MAC. This field is ignored for ARP inspection rules.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.14,G6-ACL-MIB::rulesDestinationMask,OCTET,read-write,,current,,The mask my be used to create a valid address range. This field is ignored for ARP inspection rules.
.1.3.6.1.4.1.3181.10.6.3.51.4.1.15,G6-ACL-MIB::rulesDestinationPort,Integer32,read-write,,current,,May be used to specify a specific udp/tcp port. A value of 0 ignores this field. The field is also ignored for ARP inspection rules.
.1.3.6.1.4.1.3181.10.6.3.62,G6-CLI-MIB::cli,,,,,,
.1.3.6.1.4.1.3181.10.6.3.62.1,G6-CLI-MIB::cliEnableTelnet,INTEGER,read-write,,current,disabled(0):enabled(1),Enable TELNET for CLI access. Note: Disable TELNET and enable only SSH when only secure access is desired.
.1.3.6.1.4.1.3181.10.6.3.62.2,G6-CLI-MIB::cliEnableSsh,INTEGER,read-write,,current,disabled(0):enabled(1),Enable SSH for CLI access. Note: When disabled also the SFTP file transfer server is disabled. 
.1.3.6.1.4.1.3181.10.6.3.62.3,G6-CLI-MIB::cliPromptSource,INTEGER,read-write,,current,hostname(0):deviceLocation(1):userName(2):userDefined(3),Decides which prompt is shown.
.1.3.6.1.4.1.3181.10.6.3.62.4,G6-CLI-MIB::cliWelcomeMessage,OCTET,read-write,,current,,This welcome message is displayed prior to the login prompt.
.1.3.6.1.4.1.3181.10.6.3.62.5,G6-CLI-MIB::cliUserPrompt,OCTET,read-write,,current,,User definable prompt string.
.1.3.6.1.4.1.3181.10.6.3.62.6,G6-CLI-MIB::cliColors,INTEGER,read-write,,current,disabled(0):enabled(1),Color enhances readability but may not work with every terminal. Disable function when funny character appear.
.1.3.6.1.4.1.3181.10.6.3.62.7,G6-CLI-MIB::cliScriptMode,INTEGER,read-write,,current,disabled(0):enabled(1),When set the output will include the the full command which permits to pipe the output into a script file.
.1.3.6.1.4.1.3181.10.6.3.62.8,G6-CLI-MIB::cliAutoTextExpansion,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled typing characters will automatically be expanded on the command line for quicker access. This may conflict with batch file processing.
.1.3.6.1.4.1.3181.10.6.3.62.9,G6-CLI-MIB::cliDontAskQuestions,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled security questions are avoided for experienced operators.
.1.3.6.1.4.1.3181.10.6.3.62.10,G6-CLI-MIB::cliInactivityTimeout,Integer32,read-write,,current,,An unattended CLI terminal logs off automatically after specified seconds. Use 0 to disable timeout.
.1.3.6.1.4.1.3181.10.6.3.62.11,G6-CLI-MIB::cliMicroscriptTracing,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the program flow of each running microscript or app is traced. The resulting trace files are accessible under ftp folder script_logs. This feature may be used to debug scripts and should otherwise be disabled.
.1.3.6.1.4.1.3181.10.6.3.62.12,G6-CLI-MIB::cliNamedStatusSelection,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled dynamic status tables can comfortably be referenced by name. Otherwise a numerical index is used.
.1.3.6.1.4.1.3181.10.6.3.62.13,G6-CLI-MIB::cliLiveHelp,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled a help text is automatically displayed while browsing through the CLI commands.
.1.3.6.1.4.1.3181.10.6.3.62.14,G6-CLI-MIB::favoritesTable,,not-accessible,,current,,This table may be for a customized the favorites display. The commands are displayed in the entered order using the Favorites command.
.1.3.6.1.4.1.3181.10.6.3.62.14.1,G6-CLI-MIB::favoritesEntry,,not-accessible,favoritesIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.62.14.1.1,G6-CLI-MIB::favoritesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.62.14.1.2,G6-CLI-MIB::favoritesCommandLine,OCTET,read-write,,current,,Enter full command as it would be typed on the CLI console. This may also include calling scripts using runscriptfile = file syntax.
.1.3.6.1.4.1.3181.10.6.3.62.100,G6-CLI-MIB::cliLastInstance,Integer32,read-only,,current,,Number of times a CLI was started. Note: this value wraps at 255.
.1.3.6.1.4.1.3181.10.6.3.62.101,G6-CLI-MIB::scriptStatusTable,,not-accessible,,current,,Statistics about script file execution. Note that multiple CLI instances or command line invokations add up in the same statistics.
.1.3.6.1.4.1.3181.10.6.3.62.101.1,G6-CLI-MIB::scriptStatusEntry,,not-accessible,scriptStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.62.101.1.1,G6-CLI-MIB::scriptStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.62.101.1.2,G6-CLI-MIB::scriptStatusLastScriptName,OCTET,read-only,,current,,Name of last CLI script executed.
.1.3.6.1.4.1.3181.10.6.3.62.101.1.3,G6-CLI-MIB::scriptStatusExecutedFiles,Unsigned32,read-only,,current,,Counts each time a CLI script is executed.
.1.3.6.1.4.1.3181.10.6.3.62.101.1.4,G6-CLI-MIB::scriptStatusExecutedCommands,Unsigned32,read-only,,current,,Counts each command executed within the current/last script file. The value is reset each time a script starts executing.
.1.3.6.1.4.1.3181.10.6.3.62.101.1.5,G6-CLI-MIB::scriptStatusCommandErrors,Unsigned32,read-only,,current,,Counts each executed command within the current/last script file that returned an error code. The value is reset each time a script starts executing.
.1.3.6.1.4.1.3181.10.6.3.62.102,G6-CLI-MIB::compareStatusTable,,not-accessible,,current,,Displays status results of the % operator to compare parameter or status to a set value.
.1.3.6.1.4.1.3181.10.6.3.62.102.1,G6-CLI-MIB::compareStatusEntry,,not-accessible,compareStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.62.102.1.1,G6-CLI-MIB::compareStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.62.102.1.2,G6-CLI-MIB::compareStatusLastDotstring,OCTET,read-only,,current,,Copy of last dot_string tested.
.1.3.6.1.4.1.3181.10.6.3.62.102.1.3,G6-CLI-MIB::compareStatusMatched,INTEGER,read-only,,current,false(0):true(1),Displays True when the last comparision matched.
.1.3.6.1.4.1.3181.10.6.3.62.102.1.4,G6-CLI-MIB::compareStatusItemsCompared,Unsigned32,read-only,,current,,Counts the number of items tested. May be more than 1 when wildcards are used.
.1.3.6.1.4.1.3181.10.6.3.62.102.1.5,G6-CLI-MIB::compareStatusItemsDifferent,Unsigned32,read-only,,current,,Counts the number of items the were different. May be more than 0 when wildcards are used.
.1.3.6.1.4.1.3181.10.6.3.62.103,G6-CLI-MIB::scriptMonitorTable,,not-accessible,,current,,Displays status results of the % operator to compare parameter or status to a set value.
.1.3.6.1.4.1.3181.10.6.3.62.103.1,G6-CLI-MIB::scriptMonitorEntry,,not-accessible,scriptMonitorIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.62.103.1.1,G6-CLI-MIB::scriptMonitorIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.62.103.1.2,G6-CLI-MIB::scriptMonitorState,INTEGER,read-only,,current,unused(0):history(1):running(2),Indicates if this record displays a currently running script or a history entry of a previously running script which has ended by now.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.3,G6-CLI-MIB::scriptMonitorScriptName,OCTET,read-only,,current,,Name of the script
.1.3.6.1.4.1.3181.10.6.3.62.103.1.4,G6-CLI-MIB::scriptMonitorLaunchedBy,OCTET,read-only,,current,,Name of event or or other means of starting
.1.3.6.1.4.1.3181.10.6.3.62.103.1.5,G6-CLI-MIB::scriptMonitorCliInstance,Unsigned32,read-only,,current,,Index identifying the executing cli instance
.1.3.6.1.4.1.3181.10.6.3.62.103.1.6,G6-CLI-MIB::scriptMonitorLaunchTimeStamp,Counter32,read-only,,current,,Indicates the time when this record was created and the time this script was started.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.7,G6-CLI-MIB::scriptMonitorRunTime,Counter32,read-only,,current,,Indicates how long the script has been executing. For history entries indicates the last run time taken.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.8,G6-CLI-MIB::scriptMonitorCurrentFile,OCTET,read-only,,current,,Indicates the currently executed script file.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.9,G6-CLI-MIB::scriptMonitorCurrentSubroutine,OCTET,read-only,,current,,Indicates the currently executed subroutine.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.10,G6-CLI-MIB::scriptMonitorLinesExecuted,Unsigned32,read-only,,current,,Counts how many script lines were executed.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.11,G6-CLI-MIB::scriptMonitorCurrentLineNumber,Unsigned32,read-only,,current,,This gives a snapshot of the currently executed line of code.
.1.3.6.1.4.1.3181.10.6.3.62.103.1.12,G6-CLI-MIB::scriptMonitorScriptErrors,Unsigned32,read-only,,current,,In real time counts errors during script execution.
.1.3.6.1.4.1.3181.10.6.3.62.104,G6-CLI-MIB::instancesTable,,not-accessible,,current,,This table indicates how many CLI are currently running and for which operator and reason.
.1.3.6.1.4.1.3181.10.6.3.62.104.1,G6-CLI-MIB::instancesEntry,,not-accessible,instancesIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.62.104.1.1,G6-CLI-MIB::instancesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.62.104.1.2,G6-CLI-MIB::instancesUserName,OCTET,read-only,,current,,User that is logged in.
.1.3.6.1.4.1.3181.10.6.3.62.104.1.3,G6-CLI-MIB::instancesCommandLine,OCTET,read-only,,current,,Displays optional command line parameter or script names that are executed by this cli instance.
.1.3.6.1.4.1.3181.10.6.3.62.104.1.4,G6-CLI-MIB::instancesProcessId,Unsigned32,read-only,,current,,Indicates the process id for debugging purposes. 0 is no process.
.1.3.6.1.4.1.3181.10.6.3.62.104.1.5,G6-CLI-MIB::instancesLaunchTimeStamp,Counter32,read-only,,current,,Indicates the time when this cli was started.
.1.3.6.1.4.1.3181.10.6.3.63,G6-WEB-MIB::web,,,,,,
.1.3.6.1.4.1.3181.10.6.3.63.1,G6-WEB-MIB::webProtocol,INTEGER,read-write,,current,disabled(0):httpUnsecure(1):httpsSecure(2),Define which web client access protocol is used
.1.3.6.1.4.1.3181.10.6.3.63.2,G6-WEB-MIB::webWebTimeout,Integer32,read-write,,current,,Inactivity time out in seconds
.1.3.6.1.4.1.3181.10.6.3.63.3,G6-WEB-MIB::webHttpPortWeb,Integer32,read-write,,current,,Port used for http protocol acccess. Standard port is 80. Can be changed when non-standard port shall be used for Web management traffic.
.1.3.6.1.4.1.3181.10.6.3.63.4,G6-WEB-MIB::webHttpsPortWeb,Integer32,read-write,,current,,Port used for https protocol acccess. Standard port is 443. Can be changed when non-standard port shall be used for Web management traffic.
.1.3.6.1.4.1.3181.10.6.3.63.5,G6-WEB-MIB::webCertificateSource,INTEGER,read-write,,current,intern(0):custom(1),Determines if internal default certificate is used or a customer downloaded certificate is used. The custom certificate needs to be specified after selecting the CUSTOM option using the Management.files.certificate.activate_for_web command.
.1.3.6.1.4.1.3181.10.6.3.63.6,G6-WEB-MIB::webLoginMessage,OCTET,read-write,,current,,This message is displayed during login to the management web server.
.1.3.6.1.4.1.3181.10.6.3.63.7,G6-WEB-MIB::guiPageTable,,not-accessible,,current,,Define the look and feel of the SmartOffice graphical user interface.
.1.3.6.1.4.1.3181.10.6.3.63.7.1,G6-WEB-MIB::guiPageEntry,,not-accessible,guiPageIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.63.7.1.1,G6-WEB-MIB::guiPageIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.63.7.1.2,G6-WEB-MIB::guiPageName,OCTET,read-write,,current,,Unique name under which the page is reference a in the web gui.
.1.3.6.1.4.1.3181.10.6.3.63.7.1.3,G6-WEB-MIB::guiPageGuiMode,INTEGER,read-write,,current,disabled(0):displayOnly(1):normal(2):remoteOnly(3),Permits limiting of gui functionality for example in public places.
.1.3.6.1.4.1.3181.10.6.3.63.7.1.4,G6-WEB-MIB::guiPageColorScheme,INTEGER,read-write,,current,gray(0):blue(1):red(2):lime(3):yellow(4):pink(5):cyan(6):green(7):orange(8):purple(9):teal(10),Select desired look of the page. Different pages may use different color schemes even if the same elements are placed on them.
.1.3.6.1.4.1.3181.10.6.3.63.7.1.5,G6-WEB-MIB::guiPageLimitedToUsers,OCTET,read-write,,current,,When left blank, every user has access to the gui page and its associated elements. When one or more comma separated user names are defined, then local or remote access to the page and its elements is limited to the listed users.
.1.3.6.1.4.1.3181.10.6.3.63.7.1.6,G6-WEB-MIB::guiPageOptions,OCTET,read-write,,current,,Optional additional parameter may be defined here is a comma separated list. Rendering options defined here, will be applied to all elements placed on the page, unless overridden with options defined at element level.
.1.3.6.1.4.1.3181.10.6.3.63.8,G6-WEB-MIB::guiElementTable,,not-accessible,,current,,Defines a single element of the user interface gui. Defines position as well as content and function.
.1.3.6.1.4.1.3181.10.6.3.63.8.1,G6-WEB-MIB::guiElementEntry,,not-accessible,guiElementIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.63.8.1.1,G6-WEB-MIB::guiElementIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.63.8.1.2,G6-WEB-MIB::guiElementName,OCTET,read-write,,current,,Unique name of the element.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.3,G6-WEB-MIB::guiElementType,INTEGER,read-write,,current,label(10):image(11):hyperLink(12):space(13):line(14):frame(15):button(30):selectBox(31):slider(32):radioButton(33):toggle(34):textBox(50):barGraph(51):gauge(52):symbol(53):diagram(54):input(55),Predefined type of element. Choose to suit the functionality needed.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.4,G6-WEB-MIB::guiElementPage,OCTET,read-write,,current,,Name of gui page(s) on which this element is placed on. Use comma to specify several pages.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.5,G6-WEB-MIB::guiElementVisibility,INTEGER,read-write,,current,normal(0):hidden(1):disabled(2),Defines if an element is rendered on the gui.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.6,G6-WEB-MIB::guiElementAutoSave,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, this gui element saves the current setting as the default value to be used should the system restart.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.7,G6-WEB-MIB::guiElementRemoteAccessible,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled, this gui element may be accessed via the the remote access interface. Use this parameter to restrict the remote interface to the required elements only.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.8,G6-WEB-MIB::guiElementSensorAttribute,OCTET,read-write,,current,,Indicates which type of sensor this gui element simulates when being operated. If left blank the element will register with its type as default.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.9,G6-WEB-MIB::guiElementScriptName,OCTET,read-write,,current,,When this element is updated the script specified in this parameter is executed. If the parameter is left blank, the standard MS_SmartOfficeControl.ms script is executed. The specified script should not contain any time consuming functions.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.10,G6-WEB-MIB::guiElementWatchedElement,OCTET,read-write,,current,,Here a valid CLI command may be entered to display any system parameter. Status or config values may be specified. Alternatively, the content of a persistent variable may be watched. Such variables can be maintained by microScript. Syntax: $varname.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.11,G6-WEB-MIB::guiElementOrder,Unsigned32,read-write,,current,,Elements are displayed in this order. Elements with same index appear in the order they are configured. There may be gaps in the order of elements.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.12,G6-WEB-MIB::guiElementHeight,OCTET,read-write,,current,,Height of element in percent of container height.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.13,G6-WEB-MIB::guiElementWidth,OCTET,read-write,,current,,Width of element in percent of container width.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.14,G6-WEB-MIB::guiElementTopMargin,OCTET,read-write,,current,,Defines the distance of element in percent of container height below the above element. Can be used to position element in relation to others.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.15,G6-WEB-MIB::guiElementLeftMargin,OCTET,read-write,,current,,Defines the distance of element in percent of container width from the end of the previous element to the left. Can be used to position element in relation to others.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.16,G6-WEB-MIB::guiElementHeader,OCTET,read-write,,current,,Title to be displayed above the element, doesn't preserve space if left empty.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.17,G6-WEB-MIB::guiElementText,OCTET,read-write,,current,,Comma separated list of texts. Appearance depends on the type of element.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.18,G6-WEB-MIB::guiElementValue,OCTET,read-write,,current,,Comma separated list of values. Usage depends on the type of element.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.19,G6-WEB-MIB::guiElementStartValue,OCTET,read-write,,current,,Default or start value which is used when the element is first created. This value is automatically updated to reflect the last setting when the auto_save parameter is enabled. This value only applies to active elements.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.20,G6-WEB-MIB::guiElementImage,OCTET,read-write,,current,,Comma separated list of images to display on the element.
.1.3.6.1.4.1.3181.10.6.3.63.8.1.21,G6-WEB-MIB::guiElementOptions,OCTET,read-write,,current,,Optional element specific additional parameter may be placed here.
.1.3.6.1.4.1.3181.10.6.3.65,G6-SNMP-MIB::snmp,,,,,,
.1.3.6.1.4.1.3181.10.6.3.65.1,G6-SNMP-MIB::deviceInfoTable,,not-accessible,,current,,SNMP version MIB-2 variables
.1.3.6.1.4.1.3181.10.6.3.65.1.1,G6-SNMP-MIB::deviceInfoEntry,,not-accessible,deviceInfoIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.65.1.1.1,G6-SNMP-MIB::deviceInfoIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.65.1.1.2,G6-SNMP-MIB::deviceInfoSysDescription,OCTET,read-only,,current,,Device description. This value is SNMP accessible as sysDescr.
.1.3.6.1.4.1.3181.10.6.3.65.1.1.3,G6-SNMP-MIB::deviceInfoSysName,OCTET,read-write,,current,,Devicename as assigned by customer. This value is SNMP accessible as sysName.
.1.3.6.1.4.1.3181.10.6.3.65.1.1.4,G6-SNMP-MIB::deviceInfoSysLocation,OCTET,read-write,,current,,Location of this device as assigned by customer. This value is SNMP accessible as sysLocation.
.1.3.6.1.4.1.3181.10.6.3.65.1.1.5,G6-SNMP-MIB::deviceInfoSysGroup,OCTET,read-write,,current,,Customer defined group definition. Note: This field does not have a MIB-2 counterpart.
.1.3.6.1.4.1.3181.10.6.3.65.1.1.6,G6-SNMP-MIB::deviceInfoSysContact,OCTET,read-write,,current,,Contact person for this device as required by customer. This value is SNMP accessible as sysContact.
.1.3.6.1.4.1.3181.10.6.3.65.1.1.7,G6-SNMP-MIB::deviceInfoSysObjectId,OCTET,read-only,,current,,Response to SNMP sysObject request.
.1.3.6.1.4.1.3181.10.6.3.65.2,G6-SNMP-MIB::v1v2ConfigTable,,not-accessible,,current,,SNMP version V1 / V2 variables
.1.3.6.1.4.1.3181.10.6.3.65.2.1,G6-SNMP-MIB::v1v2ConfigEntry,,not-accessible,v1v2ConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.65.2.1.1,G6-SNMP-MIB::v1v2ConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.65.2.1.2,G6-SNMP-MIB::v1v2ConfigEnableSnmpV1,INTEGER,read-write,,current,disabled(0):enabled(1),Only when enabled will SNMP V1 requests be responded to. May be disabled when only secure SNMP V3 access is allowed.
.1.3.6.1.4.1.3181.10.6.3.65.2.1.3,G6-SNMP-MIB::v1v2ConfigEnableSnmpV2c,INTEGER,read-write,,current,disabled(0):enabled(1),Only when enabled will SNMP V2C requests be responded to. May be disabled when only secure SNMP V3 access is allowed.
.1.3.6.1.4.1.3181.10.6.3.65.2.1.4,G6-SNMP-MIB::v1v2ConfigGetCommunity,OCTET,read-write,,current,,Community string to enable V1/V2c get commands.
.1.3.6.1.4.1.3181.10.6.3.65.2.1.5,G6-SNMP-MIB::v1v2ConfigSetCommunity,OCTET,read-write,,current,,Community string to enable V1/V2c set commands.
.1.3.6.1.4.1.3181.10.6.3.65.2.1.6,G6-SNMP-MIB::v1v2ConfigSnmpV1v2Username,OCTET,read-write,,current,,SNMP v1/v2 normally only provides light security by means of the community strings. Additional V3 like security can be applied by setting this field to any user.name defined in the access section. The access restrictions defined for the selected user also apply to the SNMP V1/v2 access when the user name is specified here. When no username or an invalid user name is configured, snmp access is blocked.
.1.3.6.1.4.1.3181.10.6.3.65.2.1.7,G6-SNMP-MIB::v1v2ConfigPermitV1v2SetCommands,INTEGER,read-write,,current,disabled(0):enabled(1),When disabled SNMP sets (writes) are declined and no modifications to the system via unsecure SNMP V1/V2 can occur.
.1.3.6.1.4.1.3181.10.6.3.65.3,G6-SNMP-MIB::v3ConfigTable,,not-accessible,,current,,SNMP version V3 variables
.1.3.6.1.4.1.3181.10.6.3.65.3.1,G6-SNMP-MIB::v3ConfigEntry,,not-accessible,v3ConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.65.3.1.1,G6-SNMP-MIB::v3ConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.65.3.1.2,G6-SNMP-MIB::v3ConfigEnableSnmpV3,INTEGER,read-write,,current,disabled(0):enabled(1),Only when enabled will SNMP V3 requests be responded to. To limit access to SNMP V3 only, disable SNMP V1 and V2 access in the configuration. 
.1.3.6.1.4.1.3181.10.6.3.65.3.1.3,G6-SNMP-MIB::v3ConfigSecurityModel,INTEGER,read-write,,current,usm(0):vacm(1),Selects if user based or view based security model is used.
.1.3.6.1.4.1.3181.10.6.3.65.3.1.4,G6-SNMP-MIB::v3ConfigSnmpEngineId,OCTET,read-write,,current,,Administratively assigned part of the computed engine id. Here the used MAC address can be used to ensure a unique value.
.1.3.6.1.4.1.3181.10.6.3.65.3.1.5,G6-SNMP-MIB::v3ConfigTrapEngineId,OCTET,read-write,,current,,This engine id is usedfor outgoing SNMP v3 traps. The value is treated as hexadecimal characters. The associated trap receiver must match this sequence or may be setup to ignore the engine id altogether. Default value defines 80000c6d which represents the our IANA value in hex followed by 03 indicating that a MAC is following. The remaining 12 character represent the MAC address o fthis device.
.1.3.6.1.4.1.3181.10.6.3.65.4,G6-SNMP-MIB::browserTable,,not-accessible,,current,,SNMP browser actions
.1.3.6.1.4.1.3181.10.6.3.65.4.1,G6-SNMP-MIB::browserEntry,,not-accessible,browserIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.65.4.1.1,G6-SNMP-MIB::browserIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.65.4.1.2,G6-SNMP-MIB::browserGet,OCTET,read-write,,current,,Invokes SNMP GET command at other device. Easiest syntax: ..get hostname OID. Type = (nothing) for basic help and = ? for extensive help. 
.1.3.6.1.4.1.3181.10.6.3.65.4.1.3,G6-SNMP-MIB::browserNext,OCTET,read-write,,current,,Invokes SNMP GETNEXT command at other device. It will display the next OID following the given one. Syntax: ..get -v 2c -c community hostname OID. Hostname can be symbolic or IP address. 
.1.3.6.1.4.1.3181.10.6.3.65.4.1.4,G6-SNMP-MIB::browserSet,OCTET,read-write,,current,,Invokes SNMP SET command at other device. Easiest syntax: ..set hostname OID type value. Check examples shown with = (enter). 
.1.3.6.1.4.1.3181.10.6.3.65.4.1.5,G6-SNMP-MIB::browserWalk,OCTET,read-write,,current,,Invokes SNMP MIBWALK command at other device. Basic syntax: = IP_address. To see MIB-II system group type = IP system. WARNING: an unlimited mib walk may take a long time. Even when the output is cancelled, the walk will continue to the end. During this time other action commands may not operate! 
.1.3.6.1.4.1.3181.10.6.3.65.100,G6-SNMP-MIB::snmpEngineBoots,Unsigned32,read-only,,current,,Number of reboots of SNMP engine since system reboot.
.1.3.6.1.4.1.3181.10.6.3.65.101,G6-SNMP-MIB::snmpEngineRuntime,Unsigned32,read-only,,current,,Runtime of SNMP engine in seconds.
.1.3.6.1.4.1.3181.10.6.3.69,G6-RADIUS-MIB::radius,,,,,,
.1.3.6.1.4.1.3181.10.6.3.69.1,G6-RADIUS-MIB::serverTable,,not-accessible,,current,,This dynamic table is used to specify access parameter to authentication servers using RADIUS or TACACS+.
.1.3.6.1.4.1.3181.10.6.3.69.1.1,G6-RADIUS-MIB::serverEntry,,not-accessible,serverIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.69.1.1.1,G6-RADIUS-MIB::serverIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.69.1.1.2,G6-RADIUS-MIB::serverName,OCTET,read-write,,current,,Unique name used to identify the server. Used for reference in Port-based Access Control configuration.
.1.3.6.1.4.1.3181.10.6.3.69.1.1.3,G6-RADIUS-MIB::serverServerType,INTEGER,read-write,,current,radius(0):tacacs(1),Flags if RADIUS or TACACS+ is specified in this entry.
.1.3.6.1.4.1.3181.10.6.3.69.1.1.4,G6-RADIUS-MIB::serverHostAddress,OCTET,read-write,,current,,IP address or symbolic name of the authentication server.
.1.3.6.1.4.1.3181.10.6.3.69.1.1.5,G6-RADIUS-MIB::serverUdpPort,Integer32,read-write,,current,,UDP port for RADIUS authentication service. Standard port is 1812. For TACACS+ this specifies the tcp port which defaults to 49.
.1.3.6.1.4.1.3181.10.6.3.69.1.1.6,G6-RADIUS-MIB::serverSharedSecret,OCTET,read-write,,current,,Shared Secret as common password between authenticator and server.
.1.3.6.1.4.1.3181.10.6.3.69.1.1.7,G6-RADIUS-MIB::serverInterimInterval,Unsigned32,read-write,,current,,If an accountant server is used, this value defines the interval between accounting updates. Set to 0 to disable this function.
.1.3.6.1.4.1.3181.10.6.3.70,G6-EVENT-MIB::event,,,,,,
.1.3.6.1.4.1.3181.10.6.3.70.1,G6-EVENT-MIB::eventListTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.70.1.1,G6-EVENT-MIB::eventListEntry,,not-accessible,eventListIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.70.1.1.1,G6-EVENT-MIB::eventListIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.70.1.1.2,G6-EVENT-MIB::eventListName,OCTET,read-only,,current,,Name of the event
.1.3.6.1.4.1.3181.10.6.3.70.1.1.3,G6-EVENT-MIB::eventListGroup,INTEGER,read-only,,current,internal(0):debug(2):test(3):reset(4):firmware(5):system(6):config(7):login(8):auth(9):power(10):temperature(11):link(12):sfp(13):poe(14):ring(15):ntp(16):signals(17):script(18):filter(19):lacp(20):app(21):cable(22):security(23):msp1000(24):backup(25):fan(26):messaging(27):terminalServer(28):smartOffice(29),Associated group of this event
.1.3.6.1.4.1.3181.10.6.3.70.1.1.4,G6-EVENT-MIB::eventListRelevance,INTEGER,read-only,,current,pos(0):neg(1):info(2),Positive, negative or informational event
.1.3.6.1.4.1.3181.10.6.3.70.1.1.5,G6-EVENT-MIB::eventListInternal,INTEGER,read-only,,current,disabled(0):enabled(1),If enabled this event cannot be used for syslog or traps
.1.3.6.1.4.1.3181.10.6.3.70.1.1.6,G6-EVENT-MIB::eventListSeverity,INTEGER,read-write,,current,disabled(0):debug(1):info(2):notice(3):warning(4):error(5):critical(6):alert(7):emergency(8),Severity level of this event. Can be modified if required
.1.3.6.1.4.1.3181.10.6.3.70.1.1.7,G6-EVENT-MIB::eventListSource,INTEGER,read-only,,current,unit(0):port(1),Unit or port related event
.1.3.6.1.4.1.3181.10.6.3.70.1.1.8,G6-EVENT-MIB::eventListTrap,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled a trap may be generated for this event
.1.3.6.1.4.1.3181.10.6.3.70.1.1.9,G6-EVENT-MIB::eventListSyslogMessage,OCTET,read-only,,current,,Fixed event text describing the cause of the event.
.1.3.6.1.4.1.3181.10.6.3.70.1.1.10,G6-EVENT-MIB::eventListCustomMessage,OCTET,read-write,,current,,Here a custom or translated version of the event text may be inserted.
.1.3.6.1.4.1.3181.10.6.3.70.1.1.11,G6-EVENT-MIB::eventListIntegerElements,OCTET,read-only,,current,,Lists which integer value informations are available for the syslog message
.1.3.6.1.4.1.3181.10.6.3.70.1.1.12,G6-EVENT-MIB::eventListStringElements,OCTET,read-only,,current,,Lists which string type informations are available for the syslog message
.1.3.6.1.4.1.3181.10.6.3.70.1.1.13,G6-EVENT-MIB::eventListCliScript,OCTET,read-write,,current,,When a script name is present the script will be executed whenever this event occurs. Note: Internal events do not trigger scripts even though a script name may be entered. Several scripts may be assigned to a single event. Syntax: app/scriptfile:subroutine para1 para2, next script... All fields besides the scriptfile are optional.
.1.3.6.1.4.1.3181.10.6.3.71,G6-LOGGING-MIB::logging,,,,,,
.1.3.6.1.4.1.3181.10.6.3.71.1,G6-LOGGING-MIB::loggingSendTestEvent,OCTET,read-write,,current,,Creates an ALIVE_TEST event. This may be used to check out log functionality. Hint: The severeness of the ALIVE_TEST event may be changed to try out alarm thresholds.
.1.3.6.1.4.1.3181.10.6.3.71.2,G6-LOGGING-MIB::loggingLogFileStorage,INTEGER,read-write,,current,ramDisk(0):sdCard(1),Select the storage type of the logfile. Writing to SD card protects the file against reboot but significantly increases SD card write cycles.
.1.3.6.1.4.1.3181.10.6.3.71.3,G6-LOGGING-MIB::targetTable,,not-accessible,,current,,An unlimited number of syslog receivers may be specified.
.1.3.6.1.4.1.3181.10.6.3.71.3.1,G6-LOGGING-MIB::targetEntry,,not-accessible,targetIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.71.3.1.1,G6-LOGGING-MIB::targetIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.71.3.1.2,G6-LOGGING-MIB::targetAlias,OCTET,read-write,,current,,Name of this syslog entry for reference.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.3,G6-LOGGING-MIB::targetHostAddress,OCTET,read-write,,current,,IP address or hostname to the syslog server or snmp manager. Leave empty for local targets such as CLI or recent logs buffer.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.4,G6-LOGGING-MIB::targetLogType,INTEGER,read-write,,current,disabled(0):syslog(1):snmpTrapV1(2):snmpTrapV2c(3):snmpTrapV3(4):snmpInformV2c(5):snmpInformV3(6):displayInCli(7):recentLogs(8),Specifes the type of event forwarding to match the desired manager.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.5,G6-LOGGING-MIB::targetDetailLevel,INTEGER,read-write,,current,concise(0):verbose(1):extended(2),Permits setting the detail level of the logged information. For SMNP v1 the setting EXTENDED changes the trap OID to indicate the private trap OID. For Syslog the setting EXTENDED prepends a rfc3164 compliant header. 
.1.3.6.1.4.1.3181.10.6.3.71.3.1.6,G6-LOGGING-MIB::targetMessageFormat,INTEGER,read-write,,current,standard(0):preferCustom(1):customOnly(2),Determines if custom message text is used. It may be desireable to use custom on the console but to use standard text in log files.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.7,G6-LOGGING-MIB::targetTrapType,INTEGER,read-write,,current,public(0):preferPublic(1):private(2):both(3),Decides whether public or private traps are used. This parameter only applies then a SNMP log_type is selected.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.8,G6-LOGGING-MIB::targetTrapCommunity,OCTET,read-write,,current,,For SNMP v1/v2c parameter may be used to help receiving manager filtering out unwanted traps.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.9,G6-LOGGING-MIB::targetSnmpV3Username,OCTET,read-write,,current,,When SNMP v3 is used this name is associated with a user under Mangement.access.user.name of the same name. The SNMP security level and passwords are taken from this user.For non SNMP logs this parameter has no effect.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.10,G6-LOGGING-MIB::targetMinimumSeverity,INTEGER,read-write,,current,disabled(0):debug(1):info(2):notice(3):warning(4):error(5):critical(6):alert(7):emergency(8),Only events with the defined severeness or worse are forwarded.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.11,G6-LOGGING-MIB::targetRequiredRelevance,INTEGER,read-write,,current,any(0):negOnly(1),Forward any event or only negative ones.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.12,G6-LOGGING-MIB::targetRequiredSource,INTEGER,read-write,,current,any(0):portOnly(1):unitOnly(2),Forward any event or only port or unit related events.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.13,G6-LOGGING-MIB::targetLogConfigChanges,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled configuration changes are logged regardless of relevance or source. When disabled no config changes are logged.
.1.3.6.1.4.1.3181.10.6.3.71.3.1.14,G6-LOGGING-MIB::targetLogDebugEventsOnly,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled debugging events with a minimum severity are logged. Other events are suppressed! When disabled no debugging events are logged.
.1.3.6.1.4.1.3181.10.6.3.71.4,G6-LOGGING-MIB::historyConfigTable,,not-accessible,,current,,Up to 15 distinct values may be polled and and saved to create a value history.
.1.3.6.1.4.1.3181.10.6.3.71.4.1,G6-LOGGING-MIB::historyConfigEntry,,not-accessible,historyConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.71.4.1.1,G6-LOGGING-MIB::historyConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.71.4.1.2,G6-LOGGING-MIB::historyConfigName,OCTET,read-write,,current,,Name of this chart
.1.3.6.1.4.1.3181.10.6.3.71.4.1.3,G6-LOGGING-MIB::historyConfigRecordMode,INTEGER,read-write,,current,disabled(0):enabled(1),Defines in which way the history data are recorded.
.1.3.6.1.4.1.3181.10.6.3.71.4.1.4,G6-LOGGING-MIB::historyConfigHistoryFileMode,INTEGER,read-write,,current,disabled(0):hourly(1):daily(2),When set, the recorded data points will be saved to flash memory. The files can be accessed in the ftp history folder or using commands under Management.files.history.
.1.3.6.1.4.1.3181.10.6.3.71.4.1.5,G6-LOGGING-MIB::historyConfigDotstring,OCTET,read-write,,current,,CLI compliant dotstring (command line) that will be executed in order to obtain the data to record.
.1.3.6.1.4.1.3181.10.6.3.71.4.1.6,G6-LOGGING-MIB::historyConfigRestart,OCTET,read-write,,current,,Clear all historic data (in RAM) and start from now on again. Only this seleted dotstring is affected. History files are NOT affected.
.1.3.6.1.4.1.3181.10.6.3.71.100,G6-LOGGING-MIB::statisticsTable,,not-accessible,,current,,These statistics indicate about the operation of the logging process.
.1.3.6.1.4.1.3181.10.6.3.71.100.1,G6-LOGGING-MIB::statisticsEntry,,not-accessible,statisticsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.71.100.1.1,G6-LOGGING-MIB::statisticsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.71.100.1.2,G6-LOGGING-MIB::statisticsNumberOfTargets,Unsigned32,read-only,,current,,Indicates who many recipients exist for an event. This includes local log file when selected.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.3,G6-LOGGING-MIB::statisticsLogfileCounter,Unsigned32,read-only,,current,,All logs written in the internal logfile system are counted here.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.4,G6-LOGGING-MIB::statisticsSyslogCounter,Unsigned32,read-only,,current,,All logs to any target are counted here.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.5,G6-LOGGING-MIB::statisticsSyslogErrorCounter,Unsigned32,read-only,,current,,All logs to any target that failed are counted here.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.6,G6-LOGGING-MIB::statisticsLastSyslogResponse,OCTET,read-only,,current,,This contains a copy of the last syslog response for trouble shooting.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.7,G6-LOGGING-MIB::statisticsTrapCounter,Unsigned32,read-only,,current,,All traps to any target are counted here.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.8,G6-LOGGING-MIB::statisticsTrapErrorCounter,Unsigned32,read-only,,current,,All traps to any target that failed are counted here.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.9,G6-LOGGING-MIB::statisticsActiveLogfileIndex,Unsigned32,read-only,,current,,Indicates which of the alternating logfiles is currently selected and contains the recent logs.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.10,G6-LOGGING-MIB::statisticsLogfile1Size,Unsigned32,read-only,,current,,Indicates the size of the internal local log file 1 in bytes.
.1.3.6.1.4.1.3181.10.6.3.71.100.1.11,G6-LOGGING-MIB::statisticsLogfile2Size,Unsigned32,read-only,,current,,Indicates the size of the internal local log file 2 in bytes.
.1.3.6.1.4.1.3181.10.6.3.71.101,G6-LOGGING-MIB::recentLogsTable,,not-accessible,,current,,This table displays the last 15 log events ordered from latest to oldest.
.1.3.6.1.4.1.3181.10.6.3.71.101.1,G6-LOGGING-MIB::recentLogsEntry,,not-accessible,recentLogsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.71.101.1.1,G6-LOGGING-MIB::recentLogsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.71.101.1.2,G6-LOGGING-MIB::recentLogsTimeStamp,Counter32,read-only,,current,,Updated whenever the entry is updated.
.1.3.6.1.4.1.3181.10.6.3.71.101.1.3,G6-LOGGING-MIB::recentLogsSeverity,INTEGER,read-only,,current,disabled(0):debug(1):info(2):notice(3):warning(4):error(5):critical(6):alert(7):emergency(8),Indicates the severeness of the event.
.1.3.6.1.4.1.3181.10.6.3.71.101.1.4,G6-LOGGING-MIB::recentLogsSource,OCTET,read-only,,current,,Indicates unit or port id of originating event source.
.1.3.6.1.4.1.3181.10.6.3.71.101.1.5,G6-LOGGING-MIB::recentLogsMessage,OCTET,read-only,,current,,This contains a copy of the last syslog message
.1.3.6.1.4.1.3181.10.6.3.71.102,G6-LOGGING-MIB::historyRecordsTable,,not-accessible,,current,,Displays historic values accumulated over time. These data may be used to plot graphs or to detect trends.
.1.3.6.1.4.1.3181.10.6.3.71.102.1,G6-LOGGING-MIB::historyRecordsEntry,,not-accessible,historyRecordsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.71.102.1.1,G6-LOGGING-MIB::historyRecordsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.71.102.1.2,G6-LOGGING-MIB::historyRecordsName,OCTET,read-only,,current,,Reflects the name of the related history_config entry.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.3,G6-LOGGING-MIB::historyRecordsState,INTEGER,read-only,,current,disabled(0):invalid(1):normal(2):updating(3),Indicates if this record displays a currently running script or a history entry of a previously running script which has ended by now.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.4,G6-LOGGING-MIB::historyRecordsLastValue,OCTET,read-only,,current,,This value is updated every second with the latest polled value.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.5,G6-LOGGING-MIB::historyRecordsAverageLastMinute,OCTET,read-only,,current,,This value is updated every second but averages over the last minute.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.6,G6-LOGGING-MIB::historyRecordsAverageLastHour,OCTET,read-only,,current,,This value is updated every minute but averages over the last hour.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.7,G6-LOGGING-MIB::historyRecordsLastMinute,OCTET,read-only,,current,,Comma separated list with one value per every second starting at second 00. 60 values are recorded. Successive commas with no content in between indicate time positions for which no data are available.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.8,G6-LOGGING-MIB::historyRecordsLastHour,OCTET,read-only,,current,,Comma separated list with one value per minute, starting at minute 00. 60 values are recorded. Successive commas with no content in between indicate time positions for which no data are yet available. Every hour the daily file gets one line appended. Every day a new file is created.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.9,G6-LOGGING-MIB::historyRecordsLastDay,OCTET,read-only,,current,,Comma separated list with one value per every 15 minutes, starting at hour 00. 96 values are recorded. Successive commas with no content in between indicate time positions for which no data are yet available. Every day at nidnight the file gets one line appended with the current day. Every month a new file is started.
.1.3.6.1.4.1.3181.10.6.3.71.102.1.10,G6-LOGGING-MIB::historyRecordsLastUpdate,Counter32,read-only,,current,,Indicates the time when this record was last updated.
.1.3.6.1.4.1.3181.10.6.3.72,G6-FILES-MIB::files,,,,,,
.1.3.6.1.4.1.3181.10.6.3.72.1,G6-FILES-MIB::appsTable,,not-accessible,,current,,This section defines commands to view, load and install apps. The files are also accessible via ftp in the apps directory.
.1.3.6.1.4.1.3181.10.6.3.72.1.1,G6-FILES-MIB::appsEntry,,not-accessible,appsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.1.1.1,G6-FILES-MIB::appsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.1.1.2,G6-FILES-MIB::appsListInstalledApps,OCTET,read-write,,current,,Lists which apps are actually installed and ready for use.
.1.3.6.1.4.1.3181.10.6.3.72.1.1.3,G6-FILES-MIB::appsShowNotes,OCTET,read-write,,current,,Displays information about an app . The app does not need to be installed for this operation. Syntax: show_notes = appname
.1.3.6.1.4.1.3181.10.6.3.72.1.1.4,G6-FILES-MIB::appsDisplayFiles,OCTET,read-write,,current,,Displays a list of all available app installation files.
.1.3.6.1.4.1.3181.10.6.3.72.1.1.5,G6-FILES-MIB::appsDeleteFile,OCTET,read-write,,current,,Deletes a previously downloaded app installation file. This does not affect unit operation.
.1.3.6.1.4.1.3181.10.6.3.72.1.1.6,G6-FILES-MIB::appsDownload,OCTET,read-write,,current,,Apps can be downloaded using various protocols. The downloaded app will not be activated until requested using the install command. Example: download = ftp://name:passwd@machine.domain:port/full/path/to/appfile.app Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.1.1.7,G6-FILES-MIB::appsListMediaFiles,OCTET,read-write,,current,,Display a list of all app files available on the external media in the apps folder.
.1.3.6.1.4.1.3181.10.6.3.72.1.1.8,G6-FILES-MIB::appsExportToMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action copies to an inserted memory stick. On a micro switch running from internal memory this action copies to an optional DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action copies the specified app file onto the removable media. If the file already exists it is overwritten. Syntax: export_to_media = appname
.1.3.6.1.4.1.3181.10.6.3.72.1.1.9,G6-FILES-MIB::appsImportFromMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action imports the specified config from an inserted memory stick. On a micro switch running from internal memory this imports the specified config from a DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action imports the specified app installation file. If the app file name already exists the file is overwritten. Any already running version of the app is not affected. To actually install the imported app use the install command. Syntax: import_from_media = app_file
.1.3.6.1.4.1.3181.10.6.3.72.1.1.10,G6-FILES-MIB::appsInstall,OCTET,read-write,,current,,Installs the app as contained in the .app installation file. Syntax: install = myapp.app. The .app suffix may be omitted. Just typing the app name (with correct capitalization) will automatically select the latest version available on the device. To update an app simply install the new version without deinstallation first. This will keep the app configuration intact (as far as the app parameter are identical between versions). 
.1.3.6.1.4.1.3181.10.6.3.72.1.1.11,G6-FILES-MIB::appsDeinstall,OCTET,read-write,,current,,Deinstalls the specified app. The app will no longer be active and all configuration and status entries will be removed. The .app file itself is retained for possible future re-installation. Syntax: deinstall = appname. Note there is no need to deinstall prior to installing an update.
.1.3.6.1.4.1.3181.10.6.3.72.2,G6-FILES-MIB::scriptsTable,,not-accessible,,current,,This section defines commands to manipulate microscripts. Sub-folders are permitted. The files are also accessible via ftp in the xml_cli_scripts directory.
.1.3.6.1.4.1.3181.10.6.3.72.2.1,G6-FILES-MIB::scriptsEntry,,not-accessible,scriptsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.2.1.1,G6-FILES-MIB::scriptsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.2.1.2,G6-FILES-MIB::scriptsListFiles,OCTET,read-write,,current,,Displays a list of all available script files, their size and date of last change.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.3,G6-FILES-MIB::scriptsShowFile,OCTET,read-write,,current,,Displays the content of a script file. In order to edit a file please use the EditScriptFile command.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.4,G6-FILES-MIB::scriptsExecute,OCTET,read-write,,current,,Executes the script file supplied. Example: files.scripts.execute = myscript or ..execute = myfolder/myscript. It also possible to execute a specific soubroutine and even to supply parameter to it. Syntax: script:subroutine par1 par2. Parameter with spaces can be enclosed with curly brackets.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.5,G6-FILES-MIB::scriptsDownloadFromServer,OCTET,read-write,,current,,A script can be downloaded from a server. Example: download_from_server = ftp://name:passwd@machine.domain:port/full/path/to/scriptfile. A local file with same name is overwritten. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.6,G6-FILES-MIB::scriptsUploadToServer,OCTET,read-write,,current,,A script file can be uploaded to a foreign server. Syntax: upload_to_server = scriptfile ftp://user:passwd@ftp.upload.com/target_folder/. Append verbose to the command to start a verbose transfer for trouble shooting. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.7,G6-FILES-MIB::scriptsCopyFile,OCTET,read-write,,current,,Copies an exisiting script file to another file. Example: copy_file = MyScript NewScript. Do not use whitespace in the new file name.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.8,G6-FILES-MIB::scriptsDeleteFile,OCTET,read-write,,current,,Deletes a script file. Careful, there is no undelete.
.1.3.6.1.4.1.3181.10.6.3.72.2.1.9,G6-FILES-MIB::scriptsTerminate,OCTET,read-write,,current,,This action command can be used to terminate (stop) a background microscript. This may also be used to terminate a script with an endless loop or a too long wait timer. Syntax: files.scripts.terminate = scriptname or files.scripts.terminate = app/scriptname.
.1.3.6.1.4.1.3181.10.6.3.72.3,G6-FILES-MIB::scriptdataTable,,not-accessible,,current,,This section defines commands to manipulate data files created by or to be used by script programs or certain apps. For example script generated log data. The files are also accessible via ftp in the script_data directory.
.1.3.6.1.4.1.3181.10.6.3.72.3.1,G6-FILES-MIB::scriptdataEntry,,not-accessible,scriptdataIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.3.1.1,G6-FILES-MIB::scriptdataIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.3.1.2,G6-FILES-MIB::scriptdataListFiles,OCTET,read-write,,current,,Displays a list of all available data files.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.3,G6-FILES-MIB::scriptdataShowFile,OCTET,read-write,,current,,Displays the content of a data file. A text format is assumed. The files cannot not be edited via CLI or the embedded editor within the CLI.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.4,G6-FILES-MIB::scriptdataDownloadFromServer,OCTET,read-write,,current,,A data file can be downloaded. Various protocols may be used. Example: download_from_server = ftp://name:passwd@machine.domain:port/full/path/to/scriptfile. A possible exisiting local file with same name is overwritten. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.5,G6-FILES-MIB::scriptdataUploadToServer,OCTET,read-write,,current,,A script data file can be uploaded. Various protocols may be used. Example: upload_to_server = scriptfile ftp://user:passwd@ftp.upload.com/ Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.6,G6-FILES-MIB::scriptdataCopyFile,OCTET,read-write,,current,,Copies an exisiting data file to another file. Example: copy_file = MyData NewData. Do not use whitespace in the new file name.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.7,G6-FILES-MIB::scriptdataDeleteFile,OCTET,read-write,,current,,Deletes a data file. It does not delete a script file. There is no undelete!
.1.3.6.1.4.1.3181.10.6.3.72.3.1.8,G6-FILES-MIB::scriptdataListMediaFiles,OCTET,read-write,,current,,Display a list of all files available on the external media in the script_data folder.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.9,G6-FILES-MIB::scriptdataExportToMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action copies to an inserted memory stick. On a micro switch running from internal memory this action copies to an optional DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action copies the specified script_data file(s) onto the removable media. If the file(s) already exists it is overwritten. Syntax: export_to_media = filename Wildcard * is supported to copy many files at once.
.1.3.6.1.4.1.3181.10.6.3.72.3.1.10,G6-FILES-MIB::scriptdataImportFromMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action imports the specified config from an inserted memory stick. On a micro switch running from internal memory this imports the specified config from a DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action imports the specified files to the script_data folder. If the file(s) already exists they are overwritten. Syntax: import_from_media = filename.
.1.3.6.1.4.1.3181.10.6.3.72.4,G6-FILES-MIB::configurationTable,,not-accessible,,current,,This section defines commands to load and store the system configuration. The configuration files are also accessible via ftp under the config directory.
.1.3.6.1.4.1.3181.10.6.3.72.4.1,G6-FILES-MIB::configurationEntry,,not-accessible,configurationIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.4.1.1,G6-FILES-MIB::configurationIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.4.1.2,G6-FILES-MIB::configurationListFolders,OCTET,read-write,,current,,Displays a list of all available configuration folders.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.3,G6-FILES-MIB::configurationBackupToFolder,OCTET,read-write,,current,,Copies running configuration to a new or existing folder. If the folder name already exists the previous configuration is overwritten. Syntax: backup_to_folder = my_new_config
.1.3.6.1.4.1.3181.10.6.3.72.4.1.4,G6-FILES-MIB::configurationRestoreFromFolder,OCTET,read-write,,current,,Restores and activates the specified user configuration. Each resulting config change will be logged as usual. Specify source folder. Syntax: restore_from_folder = folder_name. Important: This command does not restore the IP and factory configuration files.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.5,G6-FILES-MIB::configurationCommitConfig,OCTET,read-write,,current,,Commits the config to SD card now. Data are otherwise autosaved using a timer. Use this command to speed up the process. Syntax: commit_config = folder_name. Special case: 'commit_config =' will be automatically extended to 'running' to immediatly save the currently running configuration. Use this command to permanently store the configuration while system.config_save_mode = TEMPORARILY is selected.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.6,G6-FILES-MIB::configurationCompareConfiguration,OCTET,read-write,,current,,Compares two configurations and creates CLI script file that can transform the configurations to each other. Syntax: compare_configuration = (with no argument behind = ) compares running config against factory config (as defined by factory_default_folder). compare_configuration = somename compares config somename against factory_default_folder. compare_configuration = somename someothername compares the two named configurations. Special names are factory (factory defaults) and running (currently active configuration).
.1.3.6.1.4.1.3181.10.6.3.72.4.1.7,G6-FILES-MIB::configurationCopyFolder,OCTET,read-write,,current,,Copies one user config to another. The config will not be activated. Do not use whitespace for the new configuration name.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.8,G6-FILES-MIB::configurationDeleteFolder,OCTET,read-write,,current,,Deletes the specified user config. There is no undelete !
.1.3.6.1.4.1.3181.10.6.3.72.4.1.9,G6-FILES-MIB::configurationDownloadFromServer,OCTET,read-write,,current,,A configuration packed as tar or gztar file can be downloaded to a custom folder. Example: download_from_server = local_config_name ftp://name:passwd@machine.domain/full/path/to/config_file The downloaded config is not automatically activated. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.10,G6-FILES-MIB::configurationUploadToServer,OCTET,read-write,,current,,The content of the specified configuration folder is compressed into a single file (in tar.gz format) and then uploaded to a server. Various protocols may be used. Example: upload_to_server = folder ftp://user:passwd@ftp.upload.com/dir/ Note the trailing / is mandatory for ftp. Instead of a hostname an IP address may be specified. Instead of ftp other transport formats like tftp or http can be specifed. The saved file will be prefixed by the local IP address of the sending device. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.11,G6-FILES-MIB::configurationListMediaFolders,OCTET,read-write,,current,,Display a list of all configuration folders available on the external media.
.1.3.6.1.4.1.3181.10.6.3.72.4.1.12,G6-FILES-MIB::configurationExportToMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action copies to an inserted memory stick. On a micro switch running from internal memory this action copies to an optional DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action copies the specified configuration folder to a new or existing folder on the removable media. If the folder name already exists the previous configuration is overwritten. Syntax: export_media = running (This example copies the actively running config to folder config/running)
.1.3.6.1.4.1.3181.10.6.3.72.4.1.13,G6-FILES-MIB::configurationImportFromMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action imports the specified config from an inserted memory stick. On a micro switch running from internal memory this imports the specified config from a DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action imports the specified configuration to a new or existing user folder. If the folder name already exists the previous configuration is overwritten. The config folder must be located under config/name to be detected. Note that when a reserved name like running is imported, the folder is imported as running_imported. To actually activate the imported config use the restore_from_folder action. Syntax: import_from_media = my_new_config
.1.3.6.1.4.1.3181.10.6.3.72.4.1.14,G6-FILES-MIB::configurationFactoryDefaultFolder,OCTET,read-write,,current,,This parameter permits the definition of a customer specific alternative factory configuration. Care must be taken to create the desired folder beforehand via download or the backup_to_folder command. 
.1.3.6.1.4.1.3181.10.6.3.72.4.1.15,G6-FILES-MIB::configurationForceFactoryDefault,OCTET,read-write,,current,,This forcibly overwrites the current configuration with the factory files bypassing regular processing. This is intended for service personnel only and requires special permission. For normal return to factory settings please use restore_from_folder = factory command.
.1.3.6.1.4.1.3181.10.6.3.72.5,G6-FILES-MIB::firmwareTable,,not-accessible,,current,,This section defines commands to view, load and update the system firmware.
.1.3.6.1.4.1.3181.10.6.3.72.5.1,G6-FILES-MIB::firmwareEntry,,not-accessible,firmwareIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.5.1.1,G6-FILES-MIB::firmwareIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.5.1.2,G6-FILES-MIB::firmwareListInstalledVersions,OCTET,read-write,,current,,Lists detailed version information of individual system programs.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.3,G6-FILES-MIB::firmwareDisplayFiles,OCTET,read-write,,current,,Displays a list of all available software files.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.4,G6-FILES-MIB::firmwareDeleteFile,OCTET,read-write,,current,,Deletes a previously downloaded firmware file. This does not affect unit operation.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.5,G6-FILES-MIB::firmwareDownload,OCTET,read-write,,current,,Complete updates or patches can be downloaded using various protocols. The downloaded files will not be activated until requested using the install_software_update command. Example: download = ftp://name:passwd@machine.domain:port/full/path/to/firmwarefile. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.6,G6-FILES-MIB::firmwareVerifyUpdateFile,OCTET,read-write,,current,,Verifies the software contained in the update file specified as parameter. Syntax: verify_update_file = newcode.msu The file will not be installed, just verified.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.7,G6-FILES-MIB::firmwareShowReleaseNotes,OCTET,read-write,,current,,Use to read information about a particular software archive file. Syntax: show_release_notes = filename
.1.3.6.1.4.1.3181.10.6.3.72.5.1.8,G6-FILES-MIB::firmwareInstallSoftwareUpdate,OCTET,read-write,,current,,Installs the software as contained in the update file specified as parameter. Syntax: install_software_update = newcode.msu NOTE: the unit may automatically reboot after the installation.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.9,G6-FILES-MIB::firmwareListMediaFiles,OCTET,read-write,,current,,Display a list of all firmware files available on the external media in the updates folder.
.1.3.6.1.4.1.3181.10.6.3.72.5.1.10,G6-FILES-MIB::firmwareExportToMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action copies to an inserted memory stick. On a micro switch running from internal memory this action copies to an optional DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action copies the specified firmware update file (msu) onto the removable media. If the file already exists it is overwritten. Syntax: export_media = u_10_3_3.msu
.1.3.6.1.4.1.3181.10.6.3.72.5.1.11,G6-FILES-MIB::firmwareImportFromMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action imports the specified config from an inserted memory stick. On a micro switch running from internal memory this imports the specified config from a DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action imports all firmware update files (msu files) located in the root directory of the media. No parameter are required. Syntax: import_from_media
.1.3.6.1.4.1.3181.10.6.3.72.5.1.12,G6-FILES-MIB::firmwareMirrorSdCard,OCTET,read-write,,current,,The function mirrors the whole content of the SD card into the internal flash memory of a micro switch with internal memory. This command only executes when the device is currently running on the SD card to be copied. On switch versions without internal memory nothing will happen. There are two options. OVERWRITE: All data previously stored in the internal memory, including config and passwords, is overwritten. Possibly existing custom configurations or scripts are retained. REPLACE: The internal memory is first erased before the copy commences. Any existing data are removed. This assures are clean copy ofth SD card without possible extra data being retained. Note: The miror command will not operate when system.boot_preference is set to INTERN_ONLY to safeguard the device against an illegally inserted SD card. Syntax: mirror_sd_card = OVERWRITE (or REPLACE) (uppercase).
.1.3.6.1.4.1.3181.10.6.3.72.6,G6-FILES-MIB::certificateTable,,not-accessible,,current,,This section defines commands use private SSL certificate for secure web access.
.1.3.6.1.4.1.3181.10.6.3.72.6.1,G6-FILES-MIB::certificateEntry,,not-accessible,certificateIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.6.1.1,G6-FILES-MIB::certificateIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.6.1.2,G6-FILES-MIB::certificateListFiles,OCTET,read-write,,current,,Displays a list of all custom certificates available.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.3,G6-FILES-MIB::certificateDownloadFromServer,OCTET,read-write,,current,,Custom certificate files can be downloaded. Various protocols may be used. Example: download_from_server = ftp://name:passwd@machine.domain:port/full/path/to/certificatefile. A possible local file with same name is overwritten. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.4,G6-FILES-MIB::certificateUploadToServer,OCTET,read-write,,current,,Custom certificate files can be uploaded. Various protocols may be used. Example: upload_to_server = certificate_file ftp://user:passwd@ftp.upload.com/ Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.5,G6-FILES-MIB::certificateDeleteFile,OCTET,read-write,,current,,Deletes an individual certificate file. The full name must be specified.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.6,G6-FILES-MIB::certificateActivateForWeb,OCTET,read-write,,current,,Activates the specified certificate to become active immediately for https. Syntax: activate_for_web = certificate_name (without extensions). Expects 'certificate_name.crt' and 'certificate_name.key' in certificate directory and optionally 'certificate_name.chain.crt' to be used as chain certificate file.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.7,G6-FILES-MIB::certificateActivateForSupplicant,OCTET,read-write,,current,,Activates the specified certificate to become active immediately for the supplicant. Syntax: activate_for_supplicant = target certificate_name (without extensions). Use target: SERVER, LOCAL or KEY. Expects existing certificate file name.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.8,G6-FILES-MIB::certificateDeactivateForSupplicant,OCTET,read-write,,current,,Activates the specified certificate to become active immediately for the supplicant. Syntax: activate_for_supplicant = target. Use target: SERVER, LOCAL or KEY. No certificate name is required. The certicate are not deleted, just not used anymore.
.1.3.6.1.4.1.3181.10.6.3.72.6.1.9,G6-FILES-MIB::certificateViewActiveCertificates,OCTET,read-write,,current,,Displays the content of all currenty active certificates.
.1.3.6.1.4.1.3181.10.6.3.72.7,G6-FILES-MIB::licenseTable,,not-accessible,,current,,This section defines commands install, active and check software licensing files.
.1.3.6.1.4.1.3181.10.6.3.72.7.1,G6-FILES-MIB::licenseEntry,,not-accessible,licenseIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.7.1.1,G6-FILES-MIB::licenseIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.7.1.2,G6-FILES-MIB::licenseListFiles,OCTET,read-write,,current,,Displays a list of all licenses installed.
.1.3.6.1.4.1.3181.10.6.3.72.7.1.3,G6-FILES-MIB::licenseShowFile,OCTET,read-write,,current,,Displays the content of a selected license file. License files are human readable. Be aware that any manual change to then will invalidate the signature.
.1.3.6.1.4.1.3181.10.6.3.72.7.1.4,G6-FILES-MIB::licenseDownloadFromServer,OCTET,read-write,,current,,License files can be downloaded. Various protocols may be used. Example: download_from_server = ftp://name:passwd@machine.domain:port/full/path/to/certificatefile. A possible local file with same name is overwritten. Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.7.1.5,G6-FILES-MIB::licenseDeleteFile,OCTET,read-write,,current,,Deletes an individual license file. The full name must be specified.
.1.3.6.1.4.1.3181.10.6.3.72.7.1.6,G6-FILES-MIB::licenseActivate,OCTET,read-write,,current,,Activates all available licenses to become active immediately. No parameter are required. Licenses are also activated upon system start.
.1.3.6.1.4.1.3181.10.6.3.72.7.1.7,G6-FILES-MIB::licenseViewActiveLicenses,OCTET,read-write,,current,,Displays a summary of all licenses and their expiration dates.
.1.3.6.1.4.1.3181.10.6.3.72.8,G6-FILES-MIB::historyTable,,not-accessible,,current,,This section defines commands to access the history files created of history logging is enabled. The files are also accessible via ftp in the history directory.
.1.3.6.1.4.1.3181.10.6.3.72.8.1,G6-FILES-MIB::historyEntry,,not-accessible,historyIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.8.1.1,G6-FILES-MIB::historyIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.8.1.2,G6-FILES-MIB::historyListFiles,OCTET,read-write,,current,,Displays a list of all available history files.
.1.3.6.1.4.1.3181.10.6.3.72.8.1.3,G6-FILES-MIB::historyShowFile,OCTET,read-write,,current,,Displays the content of a history file. The files cannot not be edited via CLI or the embedded editor within the CLI.
.1.3.6.1.4.1.3181.10.6.3.72.8.1.4,G6-FILES-MIB::historyUploadToServer,OCTET,read-write,,current,,A script data file can be uploaded. Various protocols may be used. Example: upload_to_server = file ftp://user:passwd@ftp.upload.com/ Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.8.1.5,G6-FILES-MIB::historyCopyFile,OCTET,read-write,,current,,Copies an exisiting history data file to another file. Example: copy_file = history_file backup_name. Do not use whitespace in the new file name.
.1.3.6.1.4.1.3181.10.6.3.72.8.1.6,G6-FILES-MIB::historyDeleteFile,OCTET,read-write,,current,,Deletes a history file. When a file is deleted, which is still updated by the history process, then a new file started as soon as the next history update cycle starts.
.1.3.6.1.4.1.3181.10.6.3.72.8.1.7,G6-FILES-MIB::historyListMediaFiles,OCTET,read-write,,current,,Display a list of all history files available on the external media in the history folder.
.1.3.6.1.4.1.3181.10.6.3.72.8.1.8,G6-FILES-MIB::historyExportToMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action copies to an inserted memory stick. On a micro switch running from internal memory this action copies to an optional DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action copies the specified history files onto the removable media. If a file already exists it is overwritten. Syntax: export_media = filename. Wildcard * may be used to select several files at once. Example: temperature_day_2017_11* to get all files of November.
.1.3.6.1.4.1.3181.10.6.3.72.9,G6-FILES-MIB::logfilesTable,,not-accessible,,current,,This section permits read access to various system log files. The files are also accessible via ftp in the logs directory.
.1.3.6.1.4.1.3181.10.6.3.72.9.1,G6-FILES-MIB::logfilesEntry,,not-accessible,logfilesIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.9.1.1,G6-FILES-MIB::logfilesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.9.1.2,G6-FILES-MIB::logfilesListFiles,OCTET,read-write,,current,,Displays a list of all available log files.
.1.3.6.1.4.1.3181.10.6.3.72.9.1.3,G6-FILES-MIB::logfilesShowFile,OCTET,read-write,,current,,Displays the content of a log file. The files cannot not be edited via CLI or the embedded editor within the CLI.
.1.3.6.1.4.1.3181.10.6.3.72.9.1.4,G6-FILES-MIB::logfilesShowLastUpdateLog,OCTET,read-write,,current,,Displays the last firmware update logfile.
.1.3.6.1.4.1.3181.10.6.3.72.9.1.5,G6-FILES-MIB::logfilesUploadLastSnapshot,OCTET,read-write,,current,,A system snapshot contains all data required for comprehensive offsite troubleshooting. A snapshot can be created under Device.system.create_snapshot. Use the upload command to send the result to a remote system. Example: upload_last_snapshot = ftp://user:passwd@ftp.upload.com/ Type = without parameter for additional online help.
.1.3.6.1.4.1.3181.10.6.3.72.9.1.6,G6-FILES-MIB::logfilesExportToMedia,OCTET,read-write,,current,,The function depends on the type of device. On devices with USB port this action copies to an inserted memory stick. On a micro switch running from internal memory this action copies to an optional DOS formatted SD card. On all other switch versions this action will do nothing. When applicable this action copies all log files onto the removable media.
.1.3.6.1.4.1.3181.10.6.3.72.10,G6-FILES-MIB::serverTable,,not-accessible,,current,,The different file transfer protocols may individually be enabled or disabled for protection.
.1.3.6.1.4.1.3181.10.6.3.72.10.1,G6-FILES-MIB::serverEntry,,not-accessible,serverIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.72.10.1.1,G6-FILES-MIB::serverIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.72.10.1.2,G6-FILES-MIB::serverEnableTftp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable TFTP server for file up-/download.
.1.3.6.1.4.1.3181.10.6.3.72.10.1.3,G6-FILES-MIB::serverEnableFtp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable FTP server for file up-/download.
.1.3.6.1.4.1.3181.10.6.3.72.10.1.4,G6-FILES-MIB::serverEnableSftp,INTEGER,read-write,,current,disabled(0):enabled(1),Enable SFTP server for file up-/download. Note SFTP also requires SSH to be enabled (see CLI settings)
.1.3.6.1.4.1.3181.10.6.3.72.10.1.5,G6-FILES-MIB::serverEnableApi,INTEGER,read-write,,current,disabled(0):enabled(1),Enable api server for dotstring management via https.
.1.3.6.1.4.1.3181.10.6.3.73,G6-NTP-MIB::ntp,,,,,,
.1.3.6.1.4.1.3181.10.6.3.73.1,G6-NTP-MIB::ntpEnableNtp,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the local clock will be synchronized with the time provided by a time server.
.1.3.6.1.4.1.3181.10.6.3.73.2,G6-NTP-MIB::ntpSyncNow,OCTET,read-write,,current,,Action command to read time server now and setup the internal clock.
.1.3.6.1.4.1.3181.10.6.3.73.3,G6-NTP-MIB::ntpDhcpProvidesNtpServer,INTEGER,read-write,,current,disabled(0):enabled(1),Enable DHCP to automatically retrieve NTP server address(es). When disabled, the locally defined addresses are used instead.
.1.3.6.1.4.1.3181.10.6.3.73.4,G6-NTP-MIB::ntpMainNtpServer,OCTET,read-write,,current,,This is the preferred NTP server address. IP address or symbolic name may be used.
.1.3.6.1.4.1.3181.10.6.3.73.5,G6-NTP-MIB::ntpBackupNtpServer,OCTET,read-write,,current,,This defines an optional alternate ntp server address. IP address or symbolic name may be used.
.1.3.6.1.4.1.3181.10.6.3.73.6,G6-NTP-MIB::ntpTrustedServer,INTEGER,read-write,,current,disabled(0):enabled(1),Some NTP server (Windows) indicate a too large deviation or indicate they are unreliable when they are not externally synchronized. To be able to still use such a server set this option to true.
.1.3.6.1.4.1.3181.10.6.3.73.7,G6-NTP-MIB::ntpSyncInterval,Integer32,read-write,,current,,Resynchronization interval (minutes), default once per day.
.1.3.6.1.4.1.3181.10.6.3.73.8,G6-NTP-MIB::ntpShowTimeDate,OCTET,read-write,,current,,Show system time and date.
.1.3.6.1.4.1.3181.10.6.3.73.9,G6-NTP-MIB::ntpListTimeZones,OCTET,read-write,,current,,Displays a long list of available timezones. Pick the timezone that matches your location and use this name for the time_zone parameter.
.1.3.6.1.4.1.3181.10.6.3.73.10,G6-NTP-MIB::ntpTimeZone,OCTET,read-write,,current,,Enter a string exactly as obtained via list_time_zones command. Note that a change of the time zone if only effective after a system reboot.
.1.3.6.1.4.1.3181.10.6.3.73.11,G6-NTP-MIB::ntpTimeFormat,OCTET,read-write,,current,,This parameter permits definition of the time format displayed under ntp.local_time. When left blank the default format hrs:min:sec is used. The parameter follows the Linux date command syntax. Please refer to external documentation for details. Use %k:%M for time without seconds. Use %P to add AM/PM where is applies. There are more options.
.1.3.6.1.4.1.3181.10.6.3.73.12,G6-NTP-MIB::ntpDateFormat,OCTET,read-write,,current,,This parameter permits definition of the data format displayed under ntp.local_date. When left blank the default format year-month-date is used. The parameter follows the Linux date command syntax. Please refer to external documentation for details. It is also possible to add weekday %A or month %B or week of year %V, etc.
.1.3.6.1.4.1.3181.10.6.3.73.100,G6-NTP-MIB::ntpStatus,INTEGER,read-only,,current,unset(0):manuallySet(1):synchronized(2):syncFailed(4):dayLightSavingTime(16),Indicates by which means the clock was last set. 
.1.3.6.1.4.1.3181.10.6.3.73.101,G6-NTP-MIB::ntpLocalTime,OCTET,read-only,,current,,Displays the current local date according to selected time zone in the format defined user ntp.time_format.
.1.3.6.1.4.1.3181.10.6.3.73.102,G6-NTP-MIB::ntpLocalDate,OCTET,read-only,,current,,Displays the current local date according to selected time zone in the format defined user ntp.date_format.
.1.3.6.1.4.1.3181.10.6.3.73.103,G6-NTP-MIB::ntpUsedNtpServer,OCTET,read-only,,current,,Actually used ntp server IP address or name
.1.3.6.1.4.1.3181.10.6.3.73.104,G6-NTP-MIB::ntpDynamicNtpServer1,OCTET,read-only,,current,,Main dynamically assigned ntp server IP address.
.1.3.6.1.4.1.3181.10.6.3.73.105,G6-NTP-MIB::ntpDynamicNtpServer2,OCTET,read-only,,current,,Alternate dynamically assigned ntp server IP address.
.1.3.6.1.4.1.3181.10.6.3.73.106,G6-NTP-MIB::ntpDynamicNtpServer3,OCTET,read-only,,current,,Alternate dynamically assigned ntp server IP address.
.1.3.6.1.4.1.3181.10.6.3.73.107,G6-NTP-MIB::ntpDynamicNtpServer4,OCTET,read-only,,current,,Alternate dynamically assigned ntp server IP address.
.1.3.6.1.4.1.3181.10.6.3.76,G6-ACCESS-MIB::access,,,,,,
.1.3.6.1.4.1.3181.10.6.3.76.1,G6-ACCESS-MIB::accessAuthenticationMode,INTEGER,read-write,,current,local(0):localThenRadius(1):radius(2):localThenTacacs(3):tacacs(4):radiusThenLocal(5):tacacsThenLocal(6),This parameter defines against which database incoming user and password are verified.
.1.3.6.1.4.1.3181.10.6.3.76.2,G6-ACCESS-MIB::userTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.2.1,G6-ACCESS-MIB::userEntry,,not-accessible,userIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.2.1.1,G6-ACCESS-MIB::userIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.2.1.2,G6-ACCESS-MIB::userName,OCTET,read-write,,current,,Unique name used to login to the system regardless of the management interface used. At least 3 character are required.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.3,G6-ACCESS-MIB::userAssociatedGroups,OCTET,read-write,,current,,A user must be part of a group and inherits the rights of the groups and their views.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.4,G6-ACCESS-MIB::userGeneralAccessRights,INTEGER,read-write,,current,noAccess(0):readOnly(1):readWrite(2),Limited access rights here overrule rights granted by the associated groups and their views. Use NO_ACCESS to temporarily suspend a user account.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.5,G6-ACCESS-MIB::userEnableTelnetAccess,INTEGER,read-write,,current,disabled(0):enabled(1),Permit CLI user access via insecure telnet session or via local serial port.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.6,G6-ACCESS-MIB::userEnableSshAccess,INTEGER,read-write,,current,disabled(0):enabled(1),Permit CLI user access via secure shell.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.7,G6-ACCESS-MIB::userEnableWebAccess,INTEGER,read-write,,current,disabled(0):enabled(1),Permit user access via the web interface.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.8,G6-ACCESS-MIB::userEnableSnmpAccess,INTEGER,read-write,,current,disabled(0):enabled(1),Permit user access via SNMP of any version. Additionally use SNMP settings to restrict to only secure SNMP v3 if desired.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.9,G6-ACCESS-MIB::userEnableNmpAccess,INTEGER,read-write,,current,disabled(0):enabled(1),Permit user access via the nmp network management application.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.10,G6-ACCESS-MIB::userEnableFtpAccess,INTEGER,read-write,,current,disabled(0):enabled(1),Permit ftp access for file transfers.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.11,G6-ACCESS-MIB::userEnterPassword,OCTET,read-write,,current,,Set a new authentication password which replaces the previous one. This password applies to all user access methods except SNMP. For SNMP v3 a separate set of passwords is used. Note: trailing spaces or multiple spaces in the password are automatically removed.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.12,G6-ACCESS-MIB::userEncryptedAuthPassword,OCTET,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.2.1.13,G6-ACCESS-MIB::userSnmpV3SecurityLevel,INTEGER,read-write,,current,noAuthNoPriv(0):authNoPriv(1):authPriv(2),Defines if login authorization and/or privacy are used.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.14,G6-ACCESS-MIB::userSnmpV3AuthAlgorithm,INTEGER,read-write,,current,noAuthentication(0):md5(1):sha(2),Defines with which algorithm the authorization key is created and decoded.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.15,G6-ACCESS-MIB::userSnmpV3PrivacyAlgorithm,INTEGER,read-write,,current,noPrivacy(0):des(1):aes(2),Defines which encryption method is used security level includes privacy.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.16,G6-ACCESS-MIB::userEnterSnmpV3AuthPassword,OCTET,read-write,,current,,Set a new SNMP v3 authentication password. This parameter only is required when SNMP v3 is used. This value correlates to the authorization key. No spaces are permitted and at least 8 character are required.
.1.3.6.1.4.1.3181.10.6.3.76.2.1.17,G6-ACCESS-MIB::userEncryptedSnmpAuthPassword,OCTET,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.2.1.18,G6-ACCESS-MIB::userEnterSnmpV3PrivacyPassword,OCTET,read-write,,current,,Set a new encryption password. This parameter only is required when SNMP v3 user based privacy is used. If left empty, the SNMP v3 authentication password is also used for SNMP v3 privacy. No spaces are permitted and at least 8 character are required. IMPORTANT: This password must be different to the authentication password !
.1.3.6.1.4.1.3181.10.6.3.76.2.1.19,G6-ACCESS-MIB::userEncryptedSnmpPrivacyPassword,OCTET,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.3,G6-ACCESS-MIB::groupTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.3.1,G6-ACCESS-MIB::groupEntry,,not-accessible,groupIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.3.1.1,G6-ACCESS-MIB::groupIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.3.1.2,G6-ACCESS-MIB::groupName,OCTET,read-write,,current,,Enter a unique and descriptive name that identifies the group. At least 3 character are required.
.1.3.6.1.4.1.3181.10.6.3.76.3.1.3,G6-ACCESS-MIB::groupAssociatedViews,OCTET,read-write,,current,,A list which may point to one or several views that make up this group.
.1.3.6.1.4.1.3181.10.6.3.76.4,G6-ACCESS-MIB::viewTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.4.1,G6-ACCESS-MIB::viewEntry,,not-accessible,viewIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.4.1.1,G6-ACCESS-MIB::viewIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.4.1.2,G6-ACCESS-MIB::viewName,OCTET,read-write,,current,,Enter a unique and descriptive name that identifies the view. At least 3 character are required.
.1.3.6.1.4.1.3181.10.6.3.76.4.1.3,G6-ACCESS-MIB::viewAssociatedPattern,OCTET,read-write,,current,,A list which may point to one or several pattern that make up this view.
.1.3.6.1.4.1.3181.10.6.3.76.5,G6-ACCESS-MIB::patternTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.5.1,G6-ACCESS-MIB::patternEntry,,not-accessible,patternIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.5.1.1,G6-ACCESS-MIB::patternIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.5.1.2,G6-ACCESS-MIB::patternName,OCTET,read-write,,current,,Enter a unique and descriptive name that identifies the pattern. At least 3 character are required.
.1.3.6.1.4.1.3181.10.6.3.76.5.1.3,G6-ACCESS-MIB::patternDotstring,OCTET,read-write,,current,,A dotstring or partical dotstring can be defined here. Example: device.port
.1.3.6.1.4.1.3181.10.6.3.76.5.1.4,G6-ACCESS-MIB::patternAccessRights,INTEGER,read-write,,current,noAccess(0):readOnly(1):readWrite(2),This defines in which way the dotstring is to be treated.
.1.3.6.1.4.1.3181.10.6.3.76.6,G6-ACCESS-MIB::radiusTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.6.1,G6-ACCESS-MIB::radiusEntry,,not-accessible,radiusIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.6.1.1,G6-ACCESS-MIB::radiusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.6.1.2,G6-ACCESS-MIB::radiusPrimaryAuthServerName,OCTET,read-write,,current,,Symbolic name of the RADIUS server used for authentication.
.1.3.6.1.4.1.3181.10.6.3.76.6.1.3,G6-ACCESS-MIB::radiusFallbackAuthServerName,OCTET,read-write,,current,,Symbolic name of the RADIUS server used for authentication if the primary server is down. Leave empty when no fallback is required.
.1.3.6.1.4.1.3181.10.6.3.76.7,G6-ACCESS-MIB::tacacsTable,,not-accessible,,current,,
.1.3.6.1.4.1.3181.10.6.3.76.7.1,G6-ACCESS-MIB::tacacsEntry,,not-accessible,tacacsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.7.1.1,G6-ACCESS-MIB::tacacsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.7.1.2,G6-ACCESS-MIB::tacacsPrimaryAuthServerName,OCTET,read-write,,current,,Symbolic name of the TACACS+ server used for authentication.
.1.3.6.1.4.1.3181.10.6.3.76.7.1.3,G6-ACCESS-MIB::tacacsFallbackAuthServerName,OCTET,read-write,,current,,Symbolic name of the TACACS+ server used for authentication if the primary server is down. Leave empty when no fallback is required.
.1.3.6.1.4.1.3181.10.6.3.76.7.1.4,G6-ACCESS-MIB::tacacsPrivilegeLevel0User,OCTET,read-write,,current,,This maps TACACS+ privilege levels to internal access model. Level 0 is lowest privilege level. Make sure the name entered here exists as local user name.
.1.3.6.1.4.1.3181.10.6.3.76.7.1.5,G6-ACCESS-MIB::tacacsPrivilegeLevel1User,OCTET,read-write,,current,,This maps TACACS+ privilege levels to internal access model. Level 1 is a basic privilege level. Make sure the name entered here exists as local user name.
.1.3.6.1.4.1.3181.10.6.3.76.7.1.6,G6-ACCESS-MIB::tacacsPrivilegeLevel15User,OCTET,read-write,,current,,This maps TACACS+ privilege levels to internal access model. Level 15 is higest privilege level and would usually be mapped to the admin user.
.1.3.6.1.4.1.3181.10.6.3.76.8,G6-ACCESS-MIB::restrictionsTable,,not-accessible,,current,,This table may be used to restrict access to the management system. Be careful not to lock your self out.
.1.3.6.1.4.1.3181.10.6.3.76.8.1,G6-ACCESS-MIB::restrictionsEntry,,not-accessible,restrictionsIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.8.1.1,G6-ACCESS-MIB::restrictionsIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.8.1.2,G6-ACCESS-MIB::restrictionsName,OCTET,read-write,,current,,Enter a unique and descriptive name that identifies the ip_address. At least 3 character are required.
.1.3.6.1.4.1.3181.10.6.3.76.8.1.3,G6-ACCESS-MIB::restrictionsMode,INTEGER,read-write,,current,unused(0):permit(1):deny(2),The associated ip address may be permitted or denied. Use UNUSED to temporarily suspend an entry.
.1.3.6.1.4.1.3181.10.6.3.76.8.1.4,G6-ACCESS-MIB::restrictionsIpAddress,OCTET,read-write,,current,,Enter an IP address or address range which is denied or permitted. For example, to describe a range of IP addresses from 192.168.0.1 to 192.168.255.255 you use: 192.168.0.0/16. Where 16 describes the number of bits in the IP address that are used for comparison (here192.168).
.1.3.6.1.4.1.3181.10.6.3.76.100,G6-ACCESS-MIB::accessNumberOfLogins,Unsigned32,read-only,,current,,This value is incremented for each successful login.
.1.3.6.1.4.1.3181.10.6.3.76.101,G6-ACCESS-MIB::loginStatusTable,,not-accessible,,current,,This table displays data which are read from the inserted SFPs.
.1.3.6.1.4.1.3181.10.6.3.76.101.1,G6-ACCESS-MIB::loginStatusEntry,,not-accessible,loginStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.76.101.1.1,G6-ACCESS-MIB::loginStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.76.101.1.2,G6-ACCESS-MIB::loginStatusState,INTEGER,read-only,,current,unused(0):loggedOff(1):activeLogin(2),Indicates if this login record displays a currently active login or a history entry of a previous login which is logged off by now.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.3,G6-ACCESS-MIB::loginStatusUserName,OCTET,read-only,,current,,User name for which this record applies.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.4,G6-ACCESS-MIB::loginStatusAuthName,OCTET,read-only,,current,,Authorization name which maps to the local user names to define the actual access rights. For local authentication this value mirrors the user name. When RADIUS authentication is used, this reflects the name provided by the RADIUS server.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.5,G6-ACCESS-MIB::loginStatusLoginId,Unsigned32,read-only,,current,,Unique value to reference this login operation
.1.3.6.1.4.1.3181.10.6.3.76.101.1.6,G6-ACCESS-MIB::loginStatusLoginTimeStamp,OCTET,read-only,,current,,Indicated the time when this user has connected to this service.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.7,G6-ACCESS-MIB::loginStatusLoginEpoch,Unsigned32,read-only,,current,,Login time stamp in Linux time since the epoch format.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.8,G6-ACCESS-MIB::loginStatusConnectTime,Counter32,read-only,,current,,Indicated since how long the connection is established. For logged off entries this indicates the connect time of entry.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.9,G6-ACCESS-MIB::loginStatusService,OCTET,read-only,,current,,Displays which service was used to perform the login.
.1.3.6.1.4.1.3181.10.6.3.76.101.1.10,G6-ACCESS-MIB::loginStatusRemoteHost,OCTET,read-only,,current,,Displays from which remote host the login was performed. Details depend on the chosen interface.
.1.3.6.1.4.1.3181.10.6.3.77,G6-SCRIPTDATA-MIB::scriptdata,,,,,,
.1.3.6.1.4.1.3181.10.6.3.77.1,G6-SCRIPTDATA-MIB::parameterTable,,not-accessible,,current,,This table is used to define script specific configuration parameter. The parameter list is created by scripts using the register parameter command.
.1.3.6.1.4.1.3181.10.6.3.77.1.1,G6-SCRIPTDATA-MIB::parameterEntry,,not-accessible,parameterIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.77.1.1.1,G6-SCRIPTDATA-MIB::parameterIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.77.1.1.2,G6-SCRIPTDATA-MIB::parameterName,OCTET,read-write,,current,,Unique script specific parameter name. At least 3 character are required. THIS NAME SHOULD NOT BE MODIFIED BY USERS.
.1.3.6.1.4.1.3181.10.6.3.77.1.1.3,G6-SCRIPTDATA-MIB::parameterValue,OCTET,read-write,,current,,Customer entered parameter value. This may be a string or a number depending of the script requirement.
.1.3.6.1.4.1.3181.10.6.3.77.100,G6-SCRIPTDATA-MIB::variablesTable,,not-accessible,,current,,Array of string variables that can be written and read by scripts. Several scripts may share data in these variables. The variables may also be accessed via SNMP.
.1.3.6.1.4.1.3181.10.6.3.77.100.1,G6-SCRIPTDATA-MIB::variablesEntry,,not-accessible,variablesIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.77.100.1.1,G6-SCRIPTDATA-MIB::variablesIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.77.100.1.2,G6-SCRIPTDATA-MIB::variablesName,OCTET,read-only,,current,,Script specific variable name for programmatic output of string variables. Format scriptname/varname. When the /(slash) is missing this is a general script variable.
.1.3.6.1.4.1.3181.10.6.3.77.100.1.3,G6-SCRIPTDATA-MIB::variablesValue,OCTET,read-only,,current,,The value can only be written via script.
.1.3.6.1.4.1.3181.10.6.3.78,G6-MISC-MIB::misc,,,,,,
.1.3.6.1.4.1.3181.10.6.3.78.1,G6-MISC-MIB::terminalServerConfigTable,,not-accessible,,current,,This section defines setting for the terminal server feature.
.1.3.6.1.4.1.3181.10.6.3.78.1.1,G6-MISC-MIB::terminalServerConfigEntry,,not-accessible,terminalServerConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.78.1.1.1,G6-MISC-MIB::terminalServerConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.78.1.1.2,G6-MISC-MIB::terminalServerConfigDeviceName,OCTET,read-write,,current,,Descriptive name for customer reference. This name is echoed upon login.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.3,G6-MISC-MIB::terminalServerConfigMode,INTEGER,read-write,,current,server(0):client(1):comPort(2),Defines the operational mode of the terminal server.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.4,G6-MISC-MIB::terminalServerConfigRemoteIp,OCTET,read-write,,current,,IP address of the associated remote partner. Only applies in CLIENT and COM_PORT mode.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.5,G6-MISC-MIB::terminalServerConfigTcpPort,Integer32,read-write,,current,,Defines the TCP port number under which the terminal server is reachable.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.6,G6-MISC-MIB::terminalServerConfigInactivityTimeout,Integer32,read-write,,current,,An unattended terminal server logs off automatically after specified seconds. Use 0 to disable timeout.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.7,G6-MISC-MIB::terminalServerConfigDataRate,INTEGER,read-write,,current,ms300(0):ms600(1):ms1200(2):ms2400(3):ms4800(4):ms9600(5):ms19200(6):ms38400(7):ms57600(8):ms115200(9):ms230400(10),Data rate in bits per second.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.8,G6-MISC-MIB::terminalServerConfigDatabits,INTEGER,read-write,,current,ms7Bit(0):ms8Bit(1),Number of data bits per character.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.9,G6-MISC-MIB::terminalServerConfigParity,INTEGER,read-write,,current,none(0):odd(1):even(2):mark(3):space(4),Defines if the parity bit is used.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.10,G6-MISC-MIB::terminalServerConfigStopBits,INTEGER,read-write,,current,ms1Bit(0):ms2Bits(1),Number of stop bits per character.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.11,G6-MISC-MIB::terminalServerConfigFlowControl,INTEGER,read-write,,current,none(0):localXonXoff(1):passXonXoff(2),Determines if flow control is used.
.1.3.6.1.4.1.3181.10.6.3.78.1.1.12,G6-MISC-MIB::terminalServerConfigForwardingTimer,Integer32,read-write,,current,,Defined in 100ms steps. After no more data are received for this time, the serial data are forwarded to the ethernet side. (VTIME)
.1.3.6.1.4.1.3181.10.6.3.78.1.1.13,G6-MISC-MIB::terminalServerConfigCharacterCount,Integer32,read-write,,current,,At least this many character must be received before data are forwarded. Set to zero to ignore count. (VMIN)
.1.3.6.1.4.1.3181.10.6.3.78.1.1.14,G6-MISC-MIB::terminalServerConfigForwardingCharacter,INTEGER,read-write,,current,none(0):cr(1):lf(2),When the specified character is received o the serial port, the tcp packet is forwarded.
.1.3.6.1.4.1.3181.10.6.3.78.2,G6-MISC-MIB::speakerConfigTable,,not-accessible,,current,,This section defines settings for an optional network addressed loudspeaker. Wav or mps3 files may be played out. Local sound files or network music files can be accessed. Not that WAV files must be provided in the format as required by the selected source. With mp3 on-the-fly transcoding is available.
.1.3.6.1.4.1.3181.10.6.3.78.2.1,G6-MISC-MIB::speakerConfigEntry,,not-accessible,speakerConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.3.78.2.1.1,G6-MISC-MIB::speakerConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.3.78.2.1.2,G6-MISC-MIB::speakerConfigPlay,OCTET,read-write,,current,,Play a sound file or stream. A local sould file must reside in the sound folder accessible via ftp. Syntax: .play = mysound.mp3 Alternatively a remote file or stream may be played in the format: .play = http://webradiostream.mp3
.1.3.6.1.4.1.3181.10.6.3.78.2.1.3,G6-MISC-MIB::speakerConfigStop,OCTET,read-write,,current,,Cancels all sound output.
.1.3.6.1.4.1.3181.10.6.3.78.2.1.4,G6-MISC-MIB::speakerConfigVolume,OCTET,read-write,,current,,Volume control if possible for this device.
.1.3.6.1.4.1.3181.10.6.3.78.2.1.5,G6-MISC-MIB::speakerConfigDeviceName,OCTET,read-write,,current,,Descriptive name for customer reference.
.1.3.6.1.4.1.3181.10.6.3.78.2.1.6,G6-MISC-MIB::speakerConfigDeviceType,INTEGER,read-write,,current,genericRtp(0):smartaudioController(1),Select type or protocol of desired speaker.
.1.3.6.1.4.1.3181.10.6.3.78.2.1.7,G6-MISC-MIB::speakerConfigOutputRate,Unsigned32,read-write,,current,,Output (re)sample rate only applies to MP3 files or streams. Default value 44100.
.1.3.6.1.4.1.3181.10.6.3.78.2.1.8,G6-MISC-MIB::speakerConfigOutputFormat,INTEGER,read-write,,current,mono(0):stereo(1),Mono Stereo conversion only applies to mp3 files or streams.
.1.3.6.1.4.1.3181.10.6.3.78.2.1.9,G6-MISC-MIB::speakerConfigHostAddress,OCTET,read-write,,current,,IP address or symbolic name of the speaker
.1.3.6.1.4.1.3181.10.6.3.78.2.1.10,G6-MISC-MIB::speakerConfigUdpPort,Integer32,read-write,,current,,UDP port for
.1.3.6.1.4.1.3181.10.6.4,G6-SMARTOFFICE-MIB::device,,,,,,Microsens private MIB for Generation 6 Ethernet Switches
.1.3.6.1.4.1.3181.10.6.4.99,G6-SMARTOFFICE-MIB::smartoffice,,,,,,
.1.3.6.1.4.1.3181.10.6.4.99.1,G6-SMARTOFFICE-MIB::smartofficeEnableSmartOffice,INTEGER,read-write,,current,disabled(0):enabled(1),Generally enable the SmartOffice solution.
.1.3.6.1.4.1.3181.10.6.4.99.2,G6-SMARTOFFICE-MIB::directorConfigTable,,not-accessible,,current,,General configuration of the director.
.1.3.6.1.4.1.3181.10.6.4.99.2.1,G6-SMARTOFFICE-MIB::directorConfigEntry,,not-accessible,directorConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.2.1.1,G6-SMARTOFFICE-MIB::directorConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.2.1.2,G6-SMARTOFFICE-MIB::directorConfigDomainName,OCTET,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.4.99.2.1.3,G6-SMARTOFFICE-MIB::directorConfigGeneralMode,INTEGER,read-write,,current,disabled(0):automatic(1):passive(2),
.1.3.6.1.4.1.3181.10.6.4.99.2.1.4,G6-SMARTOFFICE-MIB::directorConfigActOnUngroupedSensors,INTEGER,read-write,,current,disabled(0):enabled(1),When set any sensor attributes which are not configured to be part of a sensor group, will also trigger the regular script execution. This may be selected in smaller setups to save the effort of defining groups. Note that no event rate limiting can be applied to ungrouped sensors and thus using this mode can result in overloading the system leading to sluggish response times.
.1.3.6.1.4.1.3181.10.6.4.99.2.1.5,G6-SMARTOFFICE-MIB::directorConfigScanLightControllers,OCTET,read-write,,current,,Scan the local network for reachable SmartLightController and display a list.
.1.3.6.1.4.1.3181.10.6.4.99.3,G6-SMARTOFFICE-MIB::deviceConfigTable,,not-accessible,,current,,Defines the configuration of each device under control. A device may contain one or more actor or sensor functions.
.1.3.6.1.4.1.3181.10.6.4.99.3.1,G6-SMARTOFFICE-MIB::deviceConfigEntry,,not-accessible,deviceConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.3.1.1,G6-SMARTOFFICE-MIB::deviceConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.3.1.2,G6-SMARTOFFICE-MIB::deviceConfigDeviceName,OCTET,read-write,,current,,Unique group name referenced by the director
.1.3.6.1.4.1.3181.10.6.4.99.3.1.3,G6-SMARTOFFICE-MIB::deviceConfigLocation,OCTET,read-write,,current,,Free text to describe the position of the controller on the premesis. This value need NOT be savedwithin the sensor itself.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.4,G6-SMARTOFFICE-MIB::deviceConfigLatitude,OCTET,read-write,,current,,A value in degrees such as: 50,123
.1.3.6.1.4.1.3181.10.6.4.99.3.1.5,G6-SMARTOFFICE-MIB::deviceConfigLongitude,OCTET,read-write,,current,,A value in degrees such as: 50,123
.1.3.6.1.4.1.3181.10.6.4.99.3.1.6,G6-SMARTOFFICE-MIB::deviceConfigAltitude,OCTET,read-write,,current,,A value in meters.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.7,G6-SMARTOFFICE-MIB::deviceConfigPlacement,INTEGER,read-write,,current,unset(0):floor(1):wall(2):ceiling(3):duct(4):outside(5):desk(6),Information where to find the controller
.1.3.6.1.4.1.3181.10.6.4.99.3.1.8,G6-SMARTOFFICE-MIB::deviceConfigProductType,INTEGER,read-write,,current,virtual(0):smartlightController(1):directorCascade(2):hm(3):fhem(4):ip500(5):enocean(6):knx(7),Defines via which network the sensor is reachable.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.9,G6-SMARTOFFICE-MIB::deviceConfigDeviceId,OCTET,read-write,,current,,Unique manufacturer dependent identifier of the device. For SmartLightController the MAC address of the controller is entered here.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.10,G6-SMARTOFFICE-MIB::deviceConfigNetworkAddress,OCTET,read-write,,current,,May be an IP or other type of address depending on the given network access method. Can be left blank for a SmartLightController.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.11,G6-SMARTOFFICE-MIB::deviceConfigAdditionalParameter,OCTET,read-write,,current,,Comma separated list of any parameter specific for this device. Example: panel=type A,refresh_rate=12
.1.3.6.1.4.1.3181.10.6.4.99.3.1.12,G6-SMARTOFFICE-MIB::deviceConfigNetworkFailureAction,INTEGER,read-write,,current,keepCurrent(0):off(1):on(2):dimmed(3),Defines what the actor does if the network connection fails or after reboot until communication is established.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.13,G6-SMARTOFFICE-MIB::deviceConfigIdentify,OCTET,read-write,,current,,The actor will blink with its status led to signal its presence and physical location.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.14,G6-SMARTOFFICE-MIB::deviceConfigRestart,OCTET,read-write,,current,,Restart the actor.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.15,G6-SMARTOFFICE-MIB::deviceConfigCalibrate,OCTET,read-write,,current,,Start calibration process (if available for this actor type).
.1.3.6.1.4.1.3181.10.6.4.99.3.1.16,G6-SMARTOFFICE-MIB::deviceConfigPair,OCTET,read-write,,current,,Start pairing process that couples individual device to this director.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.17,G6-SMARTOFFICE-MIB::deviceConfigUnpair,OCTET,read-write,,current,,Discard exisiting pairing between an individual device and this director.
.1.3.6.1.4.1.3181.10.6.4.99.3.1.18,G6-SMARTOFFICE-MIB::deviceConfigUpdateFirmware,OCTET,read-write,,current,,Update the device firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.display_files to view a list of available files under the SLC section. (applies to SmartLight Controllers)
.1.3.6.1.4.1.3181.10.6.4.99.4,G6-SMARTOFFICE-MIB::actorGroupConfigTable,,not-accessible,,current,,Defines a group of actors that support the same attribute and which shall be set toghter to the same value.
.1.3.6.1.4.1.3181.10.6.4.99.4.1,G6-SMARTOFFICE-MIB::actorGroupConfigEntry,,not-accessible,actorGroupConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.4.1.1,G6-SMARTOFFICE-MIB::actorGroupConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.4.1.2,G6-SMARTOFFICE-MIB::actorGroupConfigGroupName,OCTET,read-write,,current,,Unique group name referenced by the director
.1.3.6.1.4.1.3181.10.6.4.99.4.1.3,G6-SMARTOFFICE-MIB::actorGroupConfigAttribute,OCTET,read-write,,current,,The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
.1.3.6.1.4.1.3181.10.6.4.99.4.1.4,G6-SMARTOFFICE-MIB::actorGroupConfigAssociatedDevices,OCTET,read-write,,current,,List of all actors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
.1.3.6.1.4.1.3181.10.6.4.99.4.1.5,G6-SMARTOFFICE-MIB::actorGroupConfigAdditionalParameter,OCTET,read-write,,current,,Comma separated list of any parameter specific for this attribute if needed.
.1.3.6.1.4.1.3181.10.6.4.99.4.1.6,G6-SMARTOFFICE-MIB::actorGroupConfigDefaultValue,OCTET,read-write,,current,,
.1.3.6.1.4.1.3181.10.6.4.99.4.1.7,G6-SMARTOFFICE-MIB::actorGroupConfigValueCaching,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is useful to ensure uninterrupted operation even in the event of a system failure or to restore conditions after a power outage.
.1.3.6.1.4.1.3181.10.6.4.99.4.1.8,G6-SMARTOFFICE-MIB::actorGroupConfigAdditionalScriptName,OCTET,read-write,,current,,When the actor group is updated, an additional script, defined here, can be executed to run time consuming functions outside of the standard processing loop. Usually, this field is left empty.
.1.3.6.1.4.1.3181.10.6.4.99.4.1.9,G6-SMARTOFFICE-MIB::actorGroupConfigManualSetValue,OCTET,read-write,,current,,This command permits setting of the group value manually bypassing the defined script logic. This is intended for testing only. Important: This manual setting always acts on priority level 8.
.1.3.6.1.4.1.3181.10.6.4.99.5,G6-SMARTOFFICE-MIB::sensorGroupConfigTable,,not-accessible,,current,,Defines a group of sensors that support the same attribute and whose data should be interpreted together.
.1.3.6.1.4.1.3181.10.6.4.99.5.1,G6-SMARTOFFICE-MIB::sensorGroupConfigEntry,,not-accessible,sensorGroupConfigIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.5.1.1,G6-SMARTOFFICE-MIB::sensorGroupConfigIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.5.1.2,G6-SMARTOFFICE-MIB::sensorGroupConfigGroupName,OCTET,read-write,,current,,Unique group name referenced by the director
.1.3.6.1.4.1.3181.10.6.4.99.5.1.3,G6-SMARTOFFICE-MIB::sensorGroupConfigAttribute,OCTET,read-write,,current,,The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.4,G6-SMARTOFFICE-MIB::sensorGroupConfigAssociatedDevices,OCTET,read-write,,current,,List of all sensors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.5,G6-SMARTOFFICE-MIB::sensorGroupConfigValueCaching,INTEGER,read-write,,current,disabled(0):enabled(1),When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is useful to ensure uninterrupted operation even in the event of a system failure or to restore conditions after a power outage.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.6,G6-SMARTOFFICE-MIB::sensorGroupConfigRunScriptWhen,INTEGER,read-write,,current,disabled(0):anyChange(1):limitCrossed(2):avgAbsolute(3):avgPercent(4):totalAbsolute(5):totalPercent(6):newPeakLevel(7):anyUpdate(8):zeroCrossing(9),Defines which sensor group status needs to change in order to run the standard (and optional additional_script). This can be used to limit the number of script runs by not following little changes that lead to no effect. This filter is logically behind the sensor specific limits defined elsewhere is this table. When the sensor filter is setup well, then this filter here can be relaxed.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.7,G6-SMARTOFFICE-MIB::sensorGroupConfigRunScriptDelta,OCTET,read-write,,current,,Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.8,G6-SMARTOFFICE-MIB::sensorGroupConfigScriptName,OCTET,read-write,,current,,When the group is updated and the required conditions are met, the script specified in this parameter is executed. If the parameter is left blank, the standard MS_SmartOfficeControl.ms script is executed. The specified script should not contain any time consuming functions. Syntax: = appname/filename:subroutine The appname and subroutine name are optional. Without appname, the script must be located in xml_cli_scripts folder.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.9,G6-SMARTOFFICE-MIB::sensorGroupConfigAdditionalScriptName,OCTET,read-write,,current,,When the group is updated and the required conditions are met and a script is defined here, this script is executed in the background after the standard processing for this group has taken place. An additional script, defined here, can be used to run time consuming functions outside of the standard processing loop. Usually, this field is left empty.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.10,G6-SMARTOFFICE-MIB::sensorGroupConfigReportMode,INTEGER,read-write,,current,disabled(0):passive(1):deltaPercent(2):deltaAbsolute(3):onThreshold(4):test(5),Defines if the sensor is passive or actively reports changes and error conditions
.1.3.6.1.4.1.3181.10.6.4.99.5.1.11,G6-SMARTOFFICE-MIB::sensorGroupConfigAdditionalParameter,OCTET,read-write,,current,,Comma separated list of any parameter specific for this attribute if needed.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.12,G6-SMARTOFFICE-MIB::sensorGroupConfigLowerBoundary,OCTET,read-write,,current,,When the measured value of any sensor is equal or below this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.13,G6-SMARTOFFICE-MIB::sensorGroupConfigUpperBoundary,OCTET,read-write,,current,,When the measured value of any sensor is equal or above this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.14,G6-SMARTOFFICE-MIB::sensorGroupConfigBoundaryHysteresis,INTEGER,read-write,,current,none(0):low(1):high(2),How much the value must return within bounds before the alarm condition is cleared.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.15,G6-SMARTOFFICE-MIB::sensorGroupConfigUpdateDelta,OCTET,read-write,,current,,Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.16,G6-SMARTOFFICE-MIB::sensorGroupConfigRateLimit,Unsigned32,read-write,,current,,Defines how quickly the value is reported. Defined In units of 100ms. 0 means no rate limiting.
.1.3.6.1.4.1.3181.10.6.4.99.5.1.17,G6-SMARTOFFICE-MIB::sensorGroupConfigClearValues,OCTET,read-write,,current,,Clear status values for minimum_peak_hold and maximum_peak_hold.
.1.3.6.1.4.1.3181.10.6.4.99.100,G6-SMARTOFFICE-MIB::deviceInformationTable,,not-accessible,,current,,Summarizes the most important inventory information of each detected device.
.1.3.6.1.4.1.3181.10.6.4.99.100.1,G6-SMARTOFFICE-MIB::deviceInformationEntry,,not-accessible,deviceInformationIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.100.1.1,G6-SMARTOFFICE-MIB::deviceInformationIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.100.1.2,G6-SMARTOFFICE-MIB::deviceInformationName,OCTET,read-only,,current,,Unique name for reference. This is name of the base device.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.3,G6-SMARTOFFICE-MIB::deviceInformationHardwareId,OCTET,read-only,,current,,A product specific hardware identification. May for example contain the MAC address.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.4,G6-SMARTOFFICE-MIB::deviceInformationDeviceType,INTEGER,read-only,,current,unused(0):sensor(1):actor(2):actorSensor(3):gateway(4):other(5),Indicates if this is an actor or sensor device.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.5,G6-SMARTOFFICE-MIB::deviceInformationOperationalState,INTEGER,read-only,,current,unknown(0):failed(1):normal(2):testMode(3):configError(4):unpaired(5):notReady(6):pairing(7):inConfig(8):unregistered(9),Indicates the operational state of the device. Device (not attribute) specific errors will be indicated here.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.6,G6-SMARTOFFICE-MIB::deviceInformationActorAttributes,OCTET,read-only,,current,,Lists which setable actor attributes are provided by this device.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.7,G6-SMARTOFFICE-MIB::deviceInformationSensorAttributes,OCTET,read-only,,current,,Lists which readable sensor attributes are provided by this device.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.8,G6-SMARTOFFICE-MIB::deviceInformationVendorName,OCTET,read-only,,current,,Vendor or manufacturer name of the device.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.9,G6-SMARTOFFICE-MIB::deviceInformationArticleNumber,OCTET,read-only,,current,,This device article number.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.10,G6-SMARTOFFICE-MIB::deviceInformationSerialNumber,OCTET,read-only,,current,,This device serial number.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.11,G6-SMARTOFFICE-MIB::deviceInformationHardwareRevision,OCTET,read-only,,current,,This device hardware version.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.12,G6-SMARTOFFICE-MIB::deviceInformationSoftwareVersion,OCTET,read-only,,current,,This device software / firmware version.
.1.3.6.1.4.1.3181.10.6.4.99.100.1.13,G6-SMARTOFFICE-MIB::deviceInformationAdditionalInfo,OCTET,read-only,,current,,Optional comma separated list of status fields specific for this type of device.
.1.3.6.1.4.1.3181.10.6.4.99.101,G6-SMARTOFFICE-MIB::actorListTable,,not-accessible,,current,,This table lists all currenly registered actors with all their attributes.
.1.3.6.1.4.1.3181.10.6.4.99.101.1,G6-SMARTOFFICE-MIB::actorListEntry,,not-accessible,actorListIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.101.1.1,G6-SMARTOFFICE-MIB::actorListIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.101.1.2,G6-SMARTOFFICE-MIB::actorListDevice,OCTET,read-only,,current,,This is name of the base device which controls this actor. There may be several actor types (attributes) in the same device and these share the same name but use different attributes. There may also be several similar actor attribues. These are differentiated with the instance parameter.
.1.3.6.1.4.1.3181.10.6.4.99.101.1.3,G6-SMARTOFFICE-MIB::actorListInstance,OCTET,read-only,,current,,Describes a unique instance when several similar functional attributes are existing in the same device
.1.3.6.1.4.1.3181.10.6.4.99.101.1.4,G6-SMARTOFFICE-MIB::actorListAttribute,OCTET,read-only,,current,,The kind of function this actor is acting on
.1.3.6.1.4.1.3181.10.6.4.99.101.1.5,G6-SMARTOFFICE-MIB::actorListAssociatedGroups,OCTET,read-only,,current,,Indicates in which actor_groups this actor takes part.
.1.3.6.1.4.1.3181.10.6.4.99.101.1.6,G6-SMARTOFFICE-MIB::actorListValue,OCTET,read-only,,current,,The currently set value as text string followed by the unit such as mA or Lux.
.1.3.6.1.4.1.3181.10.6.4.99.101.1.7,G6-SMARTOFFICE-MIB::actorListActorState,INTEGER,read-only,,current,unknown(0):ok(1):requested(2):retrying(3):confirmed(4):denied(5):failed(6):restored(7):manually(8),Indicates wether the indicated value was successfully written to the actual device.
.1.3.6.1.4.1.3181.10.6.4.99.101.1.8,G6-SMARTOFFICE-MIB::actorListLastUpdate,Counter32,read-only,,current,,Indicates the time when this record was last updated.
.1.3.6.1.4.1.3181.10.6.4.99.102,G6-SMARTOFFICE-MIB::sensorListTable,,not-accessible,,current,,This table lists all currenly registered sensors with all their attributes.
.1.3.6.1.4.1.3181.10.6.4.99.102.1,G6-SMARTOFFICE-MIB::sensorListEntry,,not-accessible,sensorListIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.102.1.1,G6-SMARTOFFICE-MIB::sensorListIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.102.1.2,G6-SMARTOFFICE-MIB::sensorListDevice,OCTET,read-only,,current,,This is name of the base device which controls this sensor. There may be several different sensor types (attributes) in the same device. These share the same name but use different attributes. There may also be several similar sensors in the device. These are differentiated with the instance parameter.
.1.3.6.1.4.1.3181.10.6.4.99.102.1.3,G6-SMARTOFFICE-MIB::sensorListInstance,OCTET,read-only,,current,,Describes a unique instance when several similar functional attributes are existing in the same device
.1.3.6.1.4.1.3181.10.6.4.99.102.1.4,G6-SMARTOFFICE-MIB::sensorListAttribute,OCTET,read-only,,current,,The kind of measurement this sensor is reporting.
.1.3.6.1.4.1.3181.10.6.4.99.102.1.5,G6-SMARTOFFICE-MIB::sensorListAssociatedGroups,OCTET,read-only,,current,,Indicates in which sensor_groups this sensor takes part.
.1.3.6.1.4.1.3181.10.6.4.99.102.1.6,G6-SMARTOFFICE-MIB::sensorListValue,OCTET,read-only,,current,,The last reported value as text string followed by the unit such as mA or Lux.
.1.3.6.1.4.1.3181.10.6.4.99.102.1.7,G6-SMARTOFFICE-MIB::sensorListSensorState,INTEGER,read-only,,current,unknown(0):ok(1):lowBatt(2):lowerLimit(3):upperLimit(4):commFailed(5):deviceFailed(6):manually(8),Indicates particular sensor states such hitting a boundary.
.1.3.6.1.4.1.3181.10.6.4.99.102.1.8,G6-SMARTOFFICE-MIB::sensorListLastUpdate,Counter32,read-only,,current,,Indicates the time when this record was last updated.
.1.3.6.1.4.1.3181.10.6.4.99.103,G6-SMARTOFFICE-MIB::actorGroupStatusTable,,not-accessible,,current,,Calculated status of the defined actor groups. The listed value reflects the value all associated actors should use. The values update when an actor group is set by a script or manually.
.1.3.6.1.4.1.3181.10.6.4.99.103.1,G6-SMARTOFFICE-MIB::actorGroupStatusEntry,,not-accessible,actorGroupStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.103.1.1,G6-SMARTOFFICE-MIB::actorGroupStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.103.1.2,G6-SMARTOFFICE-MIB::actorGroupStatusGroupName,OCTET,read-only,,current,,This is name mirrors the actor_group_configuration.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.3,G6-SMARTOFFICE-MIB::actorGroupStatusAttribute,OCTET,read-only,,current,,The name of the controlled attribute.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.4,G6-SMARTOFFICE-MIB::actorGroupStatusNumAssignedActors,Integer32,read-only,,current,,Number of actors that are configured for this group.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.5,G6-SMARTOFFICE-MIB::actorGroupStatusNumFailedActors,Integer32,read-only,,current,,Number of actors that have not responded as expected.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.6,G6-SMARTOFFICE-MIB::actorGroupStatusGroupState,INTEGER,read-only,,current,unknown(0):ok(1):updating(2):unreliable(3):manually(8),
.1.3.6.1.4.1.3181.10.6.4.99.103.1.7,G6-SMARTOFFICE-MIB::actorGroupStatusValue,OCTET,read-only,,current,,This value is set by the decision logic. May contain simple on,OFF or for example a sound file name
.1.3.6.1.4.1.3181.10.6.4.99.103.1.8,G6-SMARTOFFICE-MIB::actorGroupStatusActivePriority,Unsigned32,read-only,,current,,Indicates which priority level is currently controlling the group value. Lower values have higher priority.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.9,G6-SMARTOFFICE-MIB::actorGroupStatusPriorityValueChain,OCTET,read-only,,current,,Displays the prority=value pairs of all currently defined priority levels. Relinquished priorites are not shown.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.10,G6-SMARTOFFICE-MIB::actorGroupStatusCacheStatus,INTEGER,read-only,,current,unknown(0):disabled(1):pending(2):saved(3):failed(4),Indicates if this group_status is saved even upon system power loss or reboot.
.1.3.6.1.4.1.3181.10.6.4.99.103.1.11,G6-SMARTOFFICE-MIB::actorGroupStatusLastUpdate,Counter32,read-only,,current,,Indicates the time when this group status was last updated.
.1.3.6.1.4.1.3181.10.6.4.99.104,G6-SMARTOFFICE-MIB::sensorGroupStatusTable,,not-accessible,,current,,Calculated status for all sensor groups. The sensor values of all contributing sensors are used to calculate min, max and average values. The values update each time a sensor reports changes.
.1.3.6.1.4.1.3181.10.6.4.99.104.1,G6-SMARTOFFICE-MIB::sensorGroupStatusEntry,,not-accessible,sensorGroupStatusIndex,current,,
.1.3.6.1.4.1.3181.10.6.4.99.104.1.1,G6-SMARTOFFICE-MIB::sensorGroupStatusIndex,INTEGER,not-accessible,,current,,Automatically generated
.1.3.6.1.4.1.3181.10.6.4.99.104.1.2,G6-SMARTOFFICE-MIB::sensorGroupStatusGroupName,OCTET,read-only,,current,,This is name mirrors the sensor_group_configuration.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.3,G6-SMARTOFFICE-MIB::sensorGroupStatusAttribute,OCTET,read-only,,current,,The name of the attribute measured. E.g. brightness, motion, switch.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.4,G6-SMARTOFFICE-MIB::sensorGroupStatusNumAssignedSensors,Integer32,read-only,,current,,Number of sensors that are configured for this group.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.5,G6-SMARTOFFICE-MIB::sensorGroupStatusNumFailedSensors,Integer32,read-only,,current,,Number of sensors that have not responded as expected.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.6,G6-SMARTOFFICE-MIB::sensorGroupStatusGroupState,INTEGER,read-only,,current,unknown(0):ok(1):updating(2):unreliable(3):manually(8),Informs when not all sensors operate as expected.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.7,G6-SMARTOFFICE-MIB::sensorGroupStatusMinimumPeakHold,OCTET,read-only,,current,,Minimum value ever reported in this group since last value clear.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.8,G6-SMARTOFFICE-MIB::sensorGroupStatusMinimumValue,OCTET,read-only,,current,,Minimum value out of all sensors that report to this group.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.9,G6-SMARTOFFICE-MIB::sensorGroupStatusAverageValue,OCTET,read-only,,current,,Average value out of all sensors that report to this group. Uses the number of reporting sensors to calculate the average.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.10,G6-SMARTOFFICE-MIB::sensorGroupStatusMaximumValue,OCTET,read-only,,current,,Maximum value out of all sensors that report to this group.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.11,G6-SMARTOFFICE-MIB::sensorGroupStatusMaximumPeakHold,OCTET,read-only,,current,,Maximum value ever reported in this group since last value clear.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.12,G6-SMARTOFFICE-MIB::sensorGroupStatusTotalValue,OCTET,read-only,,current,,The total sum of all individual sensor values in this group.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.13,G6-SMARTOFFICE-MIB::sensorGroupStatusLowerBoundaryReached,Integer32,read-only,,current,,Number of sensors that have reached their lower threshold. A value of 0 means no sensor has reached a lower boundary.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.14,G6-SMARTOFFICE-MIB::sensorGroupStatusUpperBoundaryReached,Integer32,read-only,,current,,Number of sensors that have reached their upper threshold. A value of 0 means no sensor has reached an upper boundary.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.15,G6-SMARTOFFICE-MIB::sensorGroupStatusUpdatingSensorIndex,Integer32,read-only,,current,,Indicates the index to the sensor_list which has caused the latest group update.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.16,G6-SMARTOFFICE-MIB::sensorGroupStatusCacheStatus,INTEGER,read-only,,current,unknown(0):disabled(1):pending(2):saved(3):failed(4),Indicates if this attribute is saved even upon system power loss or reboot.
.1.3.6.1.4.1.3181.10.6.4.99.104.1.17,G6-SMARTOFFICE-MIB::sensorGroupStatusLastUpdate,Counter32,read-only,,current,,Indicates the time when this group status was last updated.
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
