.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.244,LANTRONIX-MIB::lantronix,,,,,,The structure of Management Information for the Lantronix enterprise
.1.3.6.1.4.1.244.1,LANTRONIX-MIB::products,,,,,,
.1.3.6.1.4.1.244.1.1,LANTRONIX-MIB::slc,,,,,,
.1.3.6.1.4.1.244.1.1.0,LANTRONIX-SLC-MIB::slcEvents,,,,,,
.1.3.6.1.4.1.244.1.1.0.1,LANTRONIX-SLC-MIB::slcEventPowerSupply,,,,,,The SNMP trap that is generated when a power supply fails  or is restored.
.1.3.6.1.4.1.244.1.1.0.2,LANTRONIX-SLC-MIB::slcEventSysadminPassword,,,,,,The SNMP trap that is generated when the sysadmin user  password is changed.
.1.3.6.1.4.1.244.1.1.0.3,LANTRONIX-SLC-MIB::slcEventSLCShutdown,,,,,,The SNMP trap that is generated when the SLC is shutdown.
.1.3.6.1.4.1.244.1.1.0.4,LANTRONIX-SLC-MIB::slcEventDevicePortData,,,,,,The SNMP trap that is generated when data is received on a  Device Port, and the Device Port has been configured to  generate a trap when a specified number of bytes  (slcDevPortNumBytes) or a specified sequence of bytes  (slcDevPortCfgEmailTextString) is received.  slcDevPortData is the actual data received.
.1.3.6.1.4.1.244.1.1.0.5,LANTRONIX-SLC-MIB::slcEventDevicePortSLMData,,,,,,The SNMP trap that is generated when data is received on a  Device Port, and the Device Port has been configured to  generate a trap designated for the SecureLinx Manager (SLM)  when a specified number of bytes is received or a specified  time frame is passed. This trap is only sent to the SLM.
.1.3.6.1.4.1.244.1.1.0.6,LANTRONIX-SLC-MIB::slcEventDevicePortSLMConfig,,,,,,The SNMP trap that is generated when the SLM logging  configuration is changed for a Device Port, and the Device  Port has been configured to generate a trap designated for  the SecureLinx Manager (SLM). This trap specifies the new  SLM logging configuration for the Device Port, and is only  sent to the SLM.
.1.3.6.1.4.1.244.1.1.0.7,LANTRONIX-SLC-MIB::slcEventDevicePortDeviceLowTemp,,,,,,The SNMP trap that is generated when the low temperature  limit for a sensor connected to a Device Port is exceeded.
.1.3.6.1.4.1.244.1.1.0.8,LANTRONIX-SLC-MIB::slcEventDevicePortDeviceHighTemp,,,,,,The SNMP trap that is generated when the high temperature  limit for a sensor connected to a Device Port is exceeded.
.1.3.6.1.4.1.244.1.1.0.9,LANTRONIX-SLC-MIB::slcEventDevicePortDeviceLowHumidity,,,,,,The SNMP trap that is generated when the low humidity  limit for a sensor connected to a Device Port is exceeded.
.1.3.6.1.4.1.244.1.1.0.10,LANTRONIX-SLC-MIB::slcEventDevicePortDeviceHighHumidity,,,,,,The SNMP trap that is generated when the high humidity  limit for a sensor connected to a Device Port is exceeded.
.1.3.6.1.4.1.244.1.1.0.11,LANTRONIX-SLC-MIB::slcEventDevicePortDeviceError,,,,,,The SNMP trap that is generated when an error occurs on a  device connected to a Device Port.
.1.3.6.1.4.1.244.1.1.0.12,LANTRONIX-SLC-MIB::slcEventPCCardAction,,,,,,The SNMP trap that is generated when an event occurs on one  of the PC Card slots.
.1.3.6.1.4.1.244.1.1.0.13,LANTRONIX-SLC-MIB::slcEventSLCInternalTemp,,,,,,The SNMP trap that is generated when the internal temperature  of the SLC is outside of the acceptable operating range.
.1.3.6.1.4.1.244.1.1.1,LANTRONIX-SLC-MIB::slcNetwork,,,,,,
.1.3.6.1.4.1.244.1.1.1.1,LANTRONIX-SLC-MIB::slcNetEth,,,,,,
.1.3.6.1.4.1.244.1.1.1.1.1,LANTRONIX-SLC-MIB::slcNetEthIfNumber,Integer32,read-only,,current,,The number of entries in the Ethernet interface table.
.1.3.6.1.4.1.244.1.1.1.1.2,LANTRONIX-SLC-MIB::slcNetEthIfTable,,not-accessible,,current,,Table of Ethernet network entries. The number of entries is  given by the value of slcNetEthIfNumber.
.1.3.6.1.4.1.244.1.1.1.1.2.1,LANTRONIX-SLC-MIB::slcNetEthIfEntry,,not-accessible,slcNetEthIfIndex,current,,An entry with the attributes for each Ethernet interface.
.1.3.6.1.4.1.244.1.1.1.1.2.1.1,LANTRONIX-SLC-MIB::slcNetEthIfIndex,Integer32,read-only,,current,,Reference index for each Ethernet interface.
.1.3.6.1.4.1.244.1.1.1.1.2.1.2,LANTRONIX-SLC-MIB::slcNetEthIfSource,INTEGER,read-only,,current,disabled(1):dhcp(2):bootp(3):static(4),The state/source for the IP Address and subnet mask for the  Ethernet interface.
.1.3.6.1.4.1.244.1.1.1.1.2.1.3,LANTRONIX-SLC-MIB::slcNetEthIfMode,INTEGER,read-only,,current,autoNegotiate(1):10mbitHalfDuplex(2):10mbitFullDuplex(3):100mbitHalfDuplex(4):100mbitFullDuplex(5),The speed and duplex for the Ethernet interface.
.1.3.6.1.4.1.244.1.1.1.1.2.1.4,LANTRONIX-SLC-MIB::slcNetEthIfIPv6Addr,OCTET,read-only,,current,,The IPv6 Address for each Ethernet interface.
.1.3.6.1.4.1.244.1.1.1.1.2.1.5,LANTRONIX-SLC-MIB::slcNetEthIfIPv6PrefixLength,INTEGER,not-accessible,,current,,The length of the prefix for slcNetEthIfIPv6Addr (in bits).
.1.3.6.1.4.1.244.1.1.1.1.2.1.6,LANTRONIX-SLC-MIB::slcNetEthIfMTU,Integer32,read-only,,current,,The Maximum Transmission Unit for the Ethernet interface.
.1.3.6.1.4.1.244.1.1.1.1.3,LANTRONIX-SLC-MIB::slcNetEthGateway,IpAddress,read-only,,current,,The gateway for routing non-Eth1 and non-Eth2 network traffic.
.1.3.6.1.4.1.244.1.1.1.1.4,LANTRONIX-SLC-MIB::slcNetEthGatewayPrecedence,INTEGER,read-only,,current,dhcp(1):default(2):gprs(3),The gateway to give precedence to, if both a static gateway  is set, and a gateway is acquired via DHCP or a GPRS Modem.
.1.3.6.1.4.1.244.1.1.1.1.5,LANTRONIX-SLC-MIB::slcNetEthKeepaliveStartProbes,Integer32,read-only,,current,,TCP keepalive timer: number of seconds to wait before sending  out the initial probe.
.1.3.6.1.4.1.244.1.1.1.1.6,LANTRONIX-SLC-MIB::slcNetEthKeepaliveNumberOfProbes,Integer32,read-only,,current,,TCP keepalive timer: number of probes to send out after the  initial probe.
.1.3.6.1.4.1.244.1.1.1.1.7,LANTRONIX-SLC-MIB::slcNetEthKeepaliveInterval,Integer32,read-only,,current,,TCP keepalive timer: number of seconds between probes.
.1.3.6.1.4.1.244.1.1.1.1.8,LANTRONIX-SLC-MIB::slcNetEthIPForwarding,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, IP forwarding is used.
.1.3.6.1.4.1.244.1.1.1.1.9,LANTRONIX-SLC-MIB::slcNetEthDNS1,IpAddress,read-only,,current,,The IP Address of DNS server #1.
.1.3.6.1.4.1.244.1.1.1.1.10,LANTRONIX-SLC-MIB::slcNetEthDNS2,IpAddress,read-only,,current,,The IP Address of DNS server #2.
.1.3.6.1.4.1.244.1.1.1.1.11,LANTRONIX-SLC-MIB::slcNetEthDNS3,IpAddress,read-only,,current,,The IP Address of DNS server #3.
.1.3.6.1.4.1.244.1.1.1.1.12,LANTRONIX-SLC-MIB::slcNetEthDomain,OCTET,read-only,,current,,The SLC domain name.
.1.3.6.1.4.1.244.1.1.1.1.13,LANTRONIX-SLC-MIB::slcNetEthAlternateGateway,IpAddress,read-only,,current,,The alternate gateway for routing non-Eth1 and non-Eth2  network traffic. The alternate gateway is used if an  IP Address usually accessible through the default gateway  fails to return one or more pings.
.1.3.6.1.4.1.244.1.1.1.1.14,LANTRONIX-SLC-MIB::slcNetEthPingIPAddress,IpAddress,read-only,,current,,The IP Address to ping to determine if the alternate gateway  should be used.
.1.3.6.1.4.1.244.1.1.1.1.15,LANTRONIX-SLC-MIB::slcNetEthPingInterface,INTEGER,read-only,,current,ethernet1(1):ethernet(2),The Ethernet interface used to determine if the alternate  gateway should be used.
.1.3.6.1.4.1.244.1.1.1.1.16,LANTRONIX-SLC-MIB::slcNetEthPingDelay,Integer32,read-only,,current,,The delay, in seconds, between pings used to determine if the  alternate gateway should be used.
.1.3.6.1.4.1.244.1.1.1.1.17,LANTRONIX-SLC-MIB::slcNetEthPingFailed,Integer32,read-only,,current,,The number of pings with no response required for the  alternate gateway to be used.
.1.3.6.1.4.1.244.1.1.1.1.18,LANTRONIX-SLC-MIB::slcNetEthBonding,INTEGER,read-only,,current,disabled(1):activeBackup(2):8023adLayer2(3):8023adLayer34(4):adaptiveLoadBalancing(5),The Ethernet network redundancy/load balancing setting.
.1.3.6.1.4.1.244.1.1.1.1.19,LANTRONIX-SLC-MIB::slcNetEthIPv6,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, IPv6 is enabled.
.1.3.6.1.4.1.244.1.1.1.2,LANTRONIX-SLC-MIB::slcNetFirewall,,,,,,
.1.3.6.1.4.1.244.1.1.1.2.1,LANTRONIX-SLC-MIB::slcNetFirewallState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, network traffic is filtered.
.1.3.6.1.4.1.244.1.1.1.2.2,LANTRONIX-SLC-MIB::slcNetFirewallReject,INTEGER,read-only,,obsolete,return(1):ignore(2),If enabled, returns a 'connection denied' message on blocked  ports. If disabled, ignores attempts to connect to a blocked  port.
.1.3.6.1.4.1.244.1.1.1.2.3,LANTRONIX-SLC-MIB::slcNetFirewallPing,INTEGER,read-only,,obsolete,disabled(1):enabled(2),If enabled, the SLC is invisible to pings.
.1.3.6.1.4.1.244.1.1.1.2.4,LANTRONIX-SLC-MIB::slcNetFirewallSSH,INTEGER,read-only,,obsolete,disabled(1):enabled(2),If enabled, the SSH port is open. If disabled, the SSH  port is blocked to network traffic.
.1.3.6.1.4.1.244.1.1.1.2.5,LANTRONIX-SLC-MIB::slcNetFirewallTelnet,INTEGER,read-only,,obsolete,disabled(1):enabled(2),If enabled, the Telnet port is open. If disabled, the Telnet  port is blocked to network traffic.
.1.3.6.1.4.1.244.1.1.1.2.6,LANTRONIX-SLC-MIB::slcNetFirewallHTTP,INTEGER,read-only,,obsolete,disabled(1):enabled(2),If enabled, the HTTP port is open. If disabled, the HTTP  port is blocked to network traffic.
.1.3.6.1.4.1.244.1.1.1.2.7,LANTRONIX-SLC-MIB::slcNetFirewallHTTPS,INTEGER,read-only,,obsolete,disabled(1):enabled(2),If enabled, the HTTPS port is open. If disabled, the HTTPS  port is blocked to network traffic.
.1.3.6.1.4.1.244.1.1.1.2.8,LANTRONIX-SLC-MIB::slcNetFirewallSMBCIFS,INTEGER,read-only,,obsolete,disabled(1):enabled(2),If enabled, the SMBCIFS port is open. If disabled, the  SMBCIFS port is blocked to network traffic.
.1.3.6.1.4.1.244.1.1.1.2.9,LANTRONIX-SLC-MIB::slcNetFirewallRulesetNumber,Integer32,read-only,,current,,The number of entries in the IP Filter Ruleset table.
.1.3.6.1.4.1.244.1.1.1.2.10,LANTRONIX-SLC-MIB::slcNetFirewallRulesetTable,,not-accessible,,current,,Table of IP Filter Rulesets. The number of entries is  given by the value of slcNetFirewallRulesetNumber.
.1.3.6.1.4.1.244.1.1.1.2.10.1,LANTRONIX-SLC-MIB::slcNetFirewallRulesetEntry,,not-accessible,slcNetFirewallRulesetIndex,current,,An entry with all the attributes, including the rules, for  an IP Filter Ruleset.
.1.3.6.1.4.1.244.1.1.1.2.10.1.1,LANTRONIX-SLC-MIB::slcNetFirewallRulesetIndex,Integer32,read-only,,current,,Reference index for each IP Filter Ruleset.
.1.3.6.1.4.1.244.1.1.1.2.10.1.2,LANTRONIX-SLC-MIB::slcNetFirewallRulesetName,OCTET,read-only,,current,,The name assigned to the IP Filter Ruleset.
.1.3.6.1.4.1.244.1.1.1.2.10.1.3,LANTRONIX-SLC-MIB::slcNetFirewallRulesetNumRules,Integer32,read-only,,current,,The number of rules in the slcNetFirewallRulesetRules string.
.1.3.6.1.4.1.244.1.1.1.2.10.1.4,LANTRONIX-SLC-MIB::slcNetFirewallRulesetRules,OCTET,read-only,,current,,The IP Filter rules that are defined for the Ruleset. The  rule format is <IP>/<Mask Bits>;<Protocol>;<Ports>;<Action>  and rules are separated by a colon. If the string is  truncated because of system limitations, the string will be  terminated with two colons.
.1.3.6.1.4.1.244.1.1.1.2.11,LANTRONIX-SLC-MIB::slcNetFirewallMappingNumber,Integer32,read-only,,current,,The number of entries in the IP Filter Mapping table.
.1.3.6.1.4.1.244.1.1.1.2.12,LANTRONIX-SLC-MIB::slcNetFirewallMappingTable,,not-accessible,,current,,Table of mappings between IP Filter Rulesets and interfaces.  The number of entries is given by the value of  slcNetFirewallMappingNumber.
.1.3.6.1.4.1.244.1.1.1.2.12.1,LANTRONIX-SLC-MIB::slcNetFirewallMappingEntry,,not-accessible,slcNetFirewallMappingIndex,current,,An entry defining an interface that has an IP Filter Ruleset  assigned to it. The interface can be either an Ethernet  interface or a PC Card or Device Port modem.
.1.3.6.1.4.1.244.1.1.1.2.12.1.1,LANTRONIX-SLC-MIB::slcNetFirewallMappingIndex,Integer32,read-only,,current,,Reference index for each IP Filter mapping.
.1.3.6.1.4.1.244.1.1.1.2.12.1.2,LANTRONIX-SLC-MIB::slcNetFirewallMappingIfac,INTEGER,read-only,,current,ethernet1(1):ethernet2(2):upperPCCard(3):lowerPCCard(4):devicePort(5),The interface which has an IP Filter Ruleset assigned to it.  If the interface is devicePort, slcNetFirewallMappingIfacId  defines which Device Port (with an attached modem) the Ruleset  is assigned to.
.1.3.6.1.4.1.244.1.1.1.2.12.1.3,LANTRONIX-SLC-MIB::slcNetFirewallMappingIfacId,Integer32,read-only,,current,,The identifier for a Device Port, if slcNetFirewallMappingIfac  equals devicePort(5). Otherwise equals zero.
.1.3.6.1.4.1.244.1.1.1.2.12.1.4,LANTRONIX-SLC-MIB::slcNetFirewallMappingRuleset,OCTET,read-only,,current,,The name of the IP Filter Ruleset assigned to the interface.
.1.3.6.1.4.1.244.1.1.1.3,LANTRONIX-SLC-MIB::slcNetRouting,,,,,,
.1.3.6.1.4.1.244.1.1.1.3.1,LANTRONIX-SLC-MIB::slcNetRouteRIPState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the Routing Information Protocol (RIP) is used.
.1.3.6.1.4.1.244.1.1.1.3.2,LANTRONIX-SLC-MIB::slcNetRouteRIPVersion,INTEGER,read-only,,current,one(1):two(2):oneAndTwo(3),The version of RIP being used.
.1.3.6.1.4.1.244.1.1.1.3.3,LANTRONIX-SLC-MIB::slcNetRouteStaticState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, static routing is used.
.1.3.6.1.4.1.244.1.1.1.3.4,LANTRONIX-SLC-MIB::slcNetRouteStaticNumber,Integer32,read-only,,current,,The number of entries in the Static Routes table.
.1.3.6.1.4.1.244.1.1.1.3.5,LANTRONIX-SLC-MIB::slcNetRouteStaticTable,,not-accessible,,current,,Table of static route entries. The number of entries is  given by the value of slcNetRouteStaticNumber.
.1.3.6.1.4.1.244.1.1.1.3.5.1,LANTRONIX-SLC-MIB::slcNetRouteStaticEntry,,not-accessible,slcNetRouteStaticIndex,current,,An entry with the IP Address, subnet mask, and gateway  for a static route.
.1.3.6.1.4.1.244.1.1.1.3.5.1.1,LANTRONIX-SLC-MIB::slcNetRouteStaticIndex,Integer32,read-only,,current,,Reference index for each static route.
.1.3.6.1.4.1.244.1.1.1.3.5.1.2,LANTRONIX-SLC-MIB::slcNetRouteStaticIP,IpAddress,read-only,,current,,The IP Address for the static route.
.1.3.6.1.4.1.244.1.1.1.3.5.1.3,LANTRONIX-SLC-MIB::slcNetRouteStaticMask,IpAddress,read-only,,current,,The subnet mask for the static route.
.1.3.6.1.4.1.244.1.1.1.3.5.1.4,LANTRONIX-SLC-MIB::slcNetRouteStaticGateway,IpAddress,read-only,,current,,The gateway for the static route.
.1.3.6.1.4.1.244.1.1.2,LANTRONIX-SLC-MIB::slcServices,,,,,,
.1.3.6.1.4.1.244.1.1.2.1,LANTRONIX-SLC-MIB::slcServNTP,,,,,,
.1.3.6.1.4.1.244.1.1.2.1.1,LANTRONIX-SLC-MIB::slcServNTPState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, NTP is used to synchronize SLC time with a  network time server.
.1.3.6.1.4.1.244.1.1.2.1.2,LANTRONIX-SLC-MIB::slcServNTPSynchronize,INTEGER,read-only,,current,broadcast(1):poll(2),The method used by the SLC to synchronize time: receive  broadcasts from the NTP server, or poll the NTP server.
.1.3.6.1.4.1.244.1.1.2.1.3,LANTRONIX-SLC-MIB::slcServNTPPoll,INTEGER,read-only,,current,local(1):public(2),If slcServNTPSynchronize is set to poll, indicates whether  a local server or a public server is used as the NTP server.
.1.3.6.1.4.1.244.1.1.2.1.4,LANTRONIX-SLC-MIB::slcServNTPServer,IpAddress,read-only,,current,,The IP Address of the local or public NTP server.
.1.3.6.1.4.1.244.1.1.2.1.5,LANTRONIX-SLC-MIB::slcServNTPLocalServer2,IpAddress,read-only,,current,,The IP Address of the 2nd local NTP server, if slcServNTPPoll  is set to local.
.1.3.6.1.4.1.244.1.1.2.1.6,LANTRONIX-SLC-MIB::slcServNTPLocalServer3,IpAddress,read-only,,current,,The IP Address of the 3rd local NTP server, if slcServNTPPoll  is set to local.
.1.3.6.1.4.1.244.1.1.2.2,LANTRONIX-SLC-MIB::slcServSyslog,,,,,,
.1.3.6.1.4.1.244.1.1.2.2.1,LANTRONIX-SLC-MIB::slcServSysNetworkLevel,INTEGER,read-only,,current,off(1):info(2):warning(3):error(4):debug(5),The logging level for Network messages.
.1.3.6.1.4.1.244.1.1.2.2.2,LANTRONIX-SLC-MIB::slcServSysServicesLevel,INTEGER,read-only,,current,off(1):info(2):warning(3):error(4):debug(5),The logging level for Services messages.
.1.3.6.1.4.1.244.1.1.2.2.3,LANTRONIX-SLC-MIB::slcServSysAuthLevel,INTEGER,read-only,,current,off(1):info(2):warning(3):error(4):debug(5),The logging level for Authentication messages.
.1.3.6.1.4.1.244.1.1.2.2.4,LANTRONIX-SLC-MIB::slcServSysDevPortLevel,INTEGER,read-only,,current,off(1):info(2):warning(3):error(4):debug(5),The logging level for Device Port messages.
.1.3.6.1.4.1.244.1.1.2.2.5,LANTRONIX-SLC-MIB::slcServSysDiagLevel,INTEGER,read-only,,current,off(1):info(2):warning(3):error(4):debug(5),The logging level for Diagnostic messages.
.1.3.6.1.4.1.244.1.1.2.2.6,LANTRONIX-SLC-MIB::slcServSysGeneralLevel,INTEGER,read-only,,current,off(1):info(2):warning(3):error(4):debug(5),The logging level for General system messages.
.1.3.6.1.4.1.244.1.1.2.2.7,LANTRONIX-SLC-MIB::slcServSysRemoteServer,IpAddress,read-only,,current,,The IP Address of the remote Syslog Server.
.1.3.6.1.4.1.244.1.1.2.2.8,LANTRONIX-SLC-MIB::slcServSysRemoteServer2,IpAddress,read-only,,current,,The IP Address of the secondary remote Syslog Server.
.1.3.6.1.4.1.244.1.1.2.3,LANTRONIX-SLC-MIB::slcServAuditLog,,,,,,
.1.3.6.1.4.1.244.1.1.2.3.1,LANTRONIX-SLC-MIB::slcServAuditState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, logs all configuration changes to an audit log.
.1.3.6.1.4.1.244.1.1.2.3.2,LANTRONIX-SLC-MIB::slcServAuditSize,Integer32,read-only,,current,,The maximum size of the audit login in Kilobytes.
.1.3.6.1.4.1.244.1.1.2.3.3,LANTRONIX-SLC-MIB::slcServAuditIncludeCLI,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, all CLI commands are included in the audit log in  addition to a description of the configuration change.
.1.3.6.1.4.1.244.1.1.2.3.4,LANTRONIX-SLC-MIB::slcServAuditInSystemLog,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, all audit log entries are also sent to the system  log.
.1.3.6.1.4.1.244.1.1.2.4,LANTRONIX-SLC-MIB::slcServSSH,,,,,,
.1.3.6.1.4.1.244.1.1.2.4.1,LANTRONIX-SLC-MIB::slcServSSHState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, allows logins to the SLC CLI via SSH.
.1.3.6.1.4.1.244.1.1.2.4.2,LANTRONIX-SLC-MIB::slcServSSHTimeout,Integer32,read-only,,current,,The timeout (in minutes) for SSH connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.2.4.3,LANTRONIX-SLC-MIB::slcServSSHWebSSH,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, allows Web SSH access to the CLI and the  Device Ports.
.1.3.6.1.4.1.244.1.1.2.4.4,LANTRONIX-SLC-MIB::slcServSSHPort,Integer32,read-only,,current,,The TCP Port number for incoming SSH sessions to the SLC CLI.
.1.3.6.1.4.1.244.1.1.2.4.5,LANTRONIX-SLC-MIB::slcServSSHV1Incoming,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, incoming SSH version 1 connections are allowed.
.1.3.6.1.4.1.244.1.1.2.5,LANTRONIX-SLC-MIB::slcServTelnet,,,,,,
.1.3.6.1.4.1.244.1.1.2.5.1,LANTRONIX-SLC-MIB::slcServTelnetState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, allows logins to the SLC CLI via Telnet.
.1.3.6.1.4.1.244.1.1.2.5.2,LANTRONIX-SLC-MIB::slcServTelnetTimeout,Integer32,read-only,,current,,The timeout (in minutes) for Telnet connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.2.5.3,LANTRONIX-SLC-MIB::slcServTelnetWebTelnet,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, allows Web Telnet access to the CLI and the  Device Ports.
.1.3.6.1.4.1.244.1.1.2.5.4,LANTRONIX-SLC-MIB::slcServTelnetTelnetOut,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, allows outgoing Telnet connections.
.1.3.6.1.4.1.244.1.1.2.6,LANTRONIX-SLC-MIB::slcServSNMP,,,,,,
.1.3.6.1.4.1.244.1.1.2.6.1,LANTRONIX-SLC-MIB::slcServSNMPState,INTEGER,read-only,,current,disabled(1):enabled(2),Enables the SNMP agent on the SLC.
.1.3.6.1.4.1.244.1.1.2.6.2,LANTRONIX-SLC-MIB::slcServSNMPTraps,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the SLC sends traps for key events.
.1.3.6.1.4.1.244.1.1.2.6.3,LANTRONIX-SLC-MIB::slcServSNMPNMS,IpAddress,read-only,,current,,The IP Address of the Network Management System (NMS).
.1.3.6.1.4.1.244.1.1.2.6.4,LANTRONIX-SLC-MIB::slcServSNMPLocation,OCTET,read-only,,current,,The SNMP location for the SLC.
.1.3.6.1.4.1.244.1.1.2.6.5,LANTRONIX-SLC-MIB::slcServSNMPContact,OCTET,read-only,,current,,The SNMP contact for the SLC.
.1.3.6.1.4.1.244.1.1.2.6.6,LANTRONIX-SLC-MIB::slcServSNMPv3User,OCTET,read-only,,current,,The user name for read-only access to the SLC via SNMP v3.
.1.3.6.1.4.1.244.1.1.2.6.7,LANTRONIX-SLC-MIB::slcServSNMPReadOnlyCommunity,OCTET,read-only,,current,,The SNMP read-only community for SNMP versions 1 and 2.
.1.3.6.1.4.1.244.1.1.2.6.8,LANTRONIX-SLC-MIB::slcServSNMPReadWriteCommunity,OCTET,read-only,,current,,The SNMP read-write community for SNMP versions 1 and 2.
.1.3.6.1.4.1.244.1.1.2.6.9,LANTRONIX-SLC-MIB::slcServSNMPTrapCommunity,OCTET,read-only,,current,,The SNMP trap community for SNMP versions 1 and 2.
.1.3.6.1.4.1.244.1.1.2.6.10,LANTRONIX-SLC-MIB::slcServSNMPAlarmDelay,Integer32,read-only,,current,,The delay, in seconds, between traps that are sent out for  alarm conditions.
.1.3.6.1.4.1.244.1.1.2.6.11,LANTRONIX-SLC-MIB::slcServSNMPv3ReadWriteUser,OCTET,read-only,,current,,The user name for read-write access to the SLC via SNMP v3.
.1.3.6.1.4.1.244.1.1.2.6.12,LANTRONIX-SLC-MIB::slcServSNMPv3Security,INTEGER,read-only,,current,noAuthNoEncrypt(1):authNoEncrypt(2):authEncrypt(3),The security model used for SNMP v3: insecure authentication  and no packet encryption, secure authentication and no packet  encryption, secure authentication and packet encryption.
.1.3.6.1.4.1.244.1.1.2.6.13,LANTRONIX-SLC-MIB::slcServSNMPv3Authentication,INTEGER,read-only,,current,MD5(1):SHA(2),When slcServSNMPv3Security is set to authNoEncrypt or  authEncrypt, the type of authentication used.
.1.3.6.1.4.1.244.1.1.2.6.14,LANTRONIX-SLC-MIB::slcServSNMPv3Encryption,INTEGER,read-only,,current,DES(1):AES(2),When slcServSNMPv3Security is set to authEncrypt, the type  of encryption used.
.1.3.6.1.4.1.244.1.1.2.7,LANTRONIX-SLC-MIB::slcServSMTP,,,,,,
.1.3.6.1.4.1.244.1.1.2.7.1,LANTRONIX-SLC-MIB::slcServSMTPServer,IpAddress,read-only,,current,,The IP Address of the SMTP (email) server.
.1.3.6.1.4.1.244.1.1.2.7.2,LANTRONIX-SLC-MIB::slcServSMTPSender,OCTET,read-only,,current,,The sender's email address for emails sent from the SLC.
.1.3.6.1.4.1.244.1.1.2.8,LANTRONIX-SLC-MIB::slcServNFS,,,,,,
.1.3.6.1.4.1.244.1.1.2.8.1,LANTRONIX-SLC-MIB::slcServNFSMountTable,,not-accessible,,current,,Table of NFS Mounts.
.1.3.6.1.4.1.244.1.1.2.8.1.1,LANTRONIX-SLC-MIB::slcServNFSMountEntry,,not-accessible,slcServNFSMountIndex,current,,An entry containing a NFS Mount and it's attributes.
.1.3.6.1.4.1.244.1.1.2.8.1.1.1,LANTRONIX-SLC-MIB::slcServNFSMountIndex,Integer32,read-only,,current,,Reference index for each NFS Mount.
.1.3.6.1.4.1.244.1.1.2.8.1.1.2,LANTRONIX-SLC-MIB::slcServNFSMountRemoteDir,OCTET,read-only,,current,,The remote directory of the NFS Mount, in the format  <remote server>:/<remote directory>.
.1.3.6.1.4.1.244.1.1.2.8.1.1.3,LANTRONIX-SLC-MIB::slcServNFSMountLocalDir,OCTET,read-only,,current,,The directory in the SLC on which the remote directory is  mounted.
.1.3.6.1.4.1.244.1.1.2.8.1.1.4,LANTRONIX-SLC-MIB::slcServNFSMountReadWrite,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the remote NFS directory is mounted read-write.  If disabled, the remote NFS directory is mounted read-only.
.1.3.6.1.4.1.244.1.1.2.8.1.1.5,LANTRONIX-SLC-MIB::slcServNFSMountMount,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the remote NFS directory is configured to be  mounted. If disabled, the remote NFS directory will not be  mounted, or will be unmounted if is is mounted.
.1.3.6.1.4.1.244.1.1.2.9,LANTRONIX-SLC-MIB::slcServCIFS,,,,,,
.1.3.6.1.4.1.244.1.1.2.9.1,LANTRONIX-SLC-MIB::slcServCIFSState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the SLC exports a CIFS share containing system  logs, Device Port logs, and saved SLC configurations.
.1.3.6.1.4.1.244.1.1.2.9.2,LANTRONIX-SLC-MIB::slcServCIFSEth1,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the CIFS share is exported on the Eth1 interface.
.1.3.6.1.4.1.244.1.1.2.9.3,LANTRONIX-SLC-MIB::slcServCIFSEth2,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the CIFS share is exported on the Eth2 interface.
.1.3.6.1.4.1.244.1.1.2.9.4,LANTRONIX-SLC-MIB::slcServCIFSWorkgroup,OCTET,read-only,,current,,The SMB/CIFS workgroup that the CIFS share is associated with.
.1.3.6.1.4.1.244.1.1.2.10,LANTRONIX-SLC-MIB::slcServSLCNetwork,,,,,,
.1.3.6.1.4.1.244.1.1.2.10.1,LANTRONIX-SLC-MIB::slcServSLCNetSearch,INTEGER,read-only,,current,both(1):subnet(2):manual(3),Indicates how to search for SLCs on the network: by searching  a list of manually entered IP Addresses, by broadcasting on  the local subnet, or both.
.1.3.6.1.4.1.244.1.1.2.10.2,LANTRONIX-SLC-MIB::slcServSLCNetNumber,Integer32,read-only,,current,,The number of entries in the SLC Network Manual IP Address table.
.1.3.6.1.4.1.244.1.1.2.10.3,LANTRONIX-SLC-MIB::slcServSLCNetTable,,not-accessible,,current,,Table of manually entered IP Address entries. The number of  entries is given by the value of slcServSLCNetNumber.
.1.3.6.1.4.1.244.1.1.2.10.3.1,LANTRONIX-SLC-MIB::slcServSLCNetEntry,,not-accessible,slcServSLCNetIndex,current,,An entry containing an IP Address for searching the SLC Network.
.1.3.6.1.4.1.244.1.1.2.10.3.1.1,LANTRONIX-SLC-MIB::slcServSLCNetIndex,Integer32,read-only,,current,,Reference index for each manual IP Address.
.1.3.6.1.4.1.244.1.1.2.10.3.1.2,LANTRONIX-SLC-MIB::slcServSLCNetIP,IpAddress,read-only,,current,,The IP Address to search for in the SLC Network.
.1.3.6.1.4.1.244.1.1.2.11,LANTRONIX-SLC-MIB::slcServPhoneHome,,,,,,
.1.3.6.1.4.1.244.1.1.2.11.1,LANTRONIX-SLC-MIB::slcServPhoneHomeState,INTEGER,read-only,,current,disabled(1):enabled(2),Enables the Phone Home feature.
.1.3.6.1.4.1.244.1.1.2.11.2,LANTRONIX-SLC-MIB::slcServPhoneHomeIP,IpAddress,read-only,,current,,The IP Address used for Phone Home communication.
.1.3.6.1.4.1.244.1.1.2.12,LANTRONIX-SLC-MIB::slcServHostList,,,,,,
.1.3.6.1.4.1.244.1.1.2.12.1,LANTRONIX-SLC-MIB::slcServHostListNumber,Integer32,read-only,,current,,The number of entries in the Host List table.
.1.3.6.1.4.1.244.1.1.2.12.2,LANTRONIX-SLC-MIB::slcServHostListTable,,not-accessible,,current,,Table of Host Lists. The number of entries is given by the  value of slcServHostListNumber.
.1.3.6.1.4.1.244.1.1.2.12.2.1,LANTRONIX-SLC-MIB::slcServHostListEntry,,not-accessible,slcServHostListIndex,current,,An entry containing a Host List, used for Dial-in connections  on a Device Port or PC Card modem.
.1.3.6.1.4.1.244.1.1.2.12.2.1.1,LANTRONIX-SLC-MIB::slcServHostListIndex,Integer32,read-only,,current,,Reference index for each Host List.
.1.3.6.1.4.1.244.1.1.2.12.2.1.2,LANTRONIX-SLC-MIB::slcServHostListName,OCTET,read-only,,current,,The unique name assigned to the Host List.
.1.3.6.1.4.1.244.1.1.2.12.2.1.3,LANTRONIX-SLC-MIB::slcServHostListRetryCount,Integer32,read-only,,current,,The number of times to retry connections to an individual host  within the Host List.
.1.3.6.1.4.1.244.1.1.2.12.2.1.4,LANTRONIX-SLC-MIB::slcServHostListAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, authentication is enabled for the hosts in the  Host List.
.1.3.6.1.4.1.244.1.1.2.12.2.1.5,LANTRONIX-SLC-MIB::slcServHostListNumHosts,Integer32,read-only,,current,,The number of individual hosts in the Host List.
.1.3.6.1.4.1.244.1.1.2.12.2.1.6,LANTRONIX-SLC-MIB::slcServHostListHosts,OCTET,read-only,,current,,A string containing all hosts in the Host List; the entry for  each host is separated by a ';'. Each host entry is formatted  as follows: '<Host>,<Protocol>,<TCP Port>,<Escape Sequence>;'.
.1.3.6.1.4.1.244.1.1.2.13,LANTRONIX-SLC-MIB::slcServWebTerm,,,,,,
.1.3.6.1.4.1.244.1.1.2.13.1,LANTRONIX-SLC-MIB::slcServWebTermDeployment,INTEGER,read-only,,current,javaWebStart(1):applet(2),The method used to launch the Java Terminal for Web SSH and  Web Telnet.
.1.3.6.1.4.1.244.1.1.2.13.2,LANTRONIX-SLC-MIB::slcServWebTermBufSize,Integer32,read-only,,current,,The number of lines in the Java Terminal buffer.
.1.3.6.1.4.1.244.1.1.3,LANTRONIX-SLC-MIB::slcAuth,,,,,,
.1.3.6.1.4.1.244.1.1.3.1,LANTRONIX-SLC-MIB::slcAuthLocal,,,,,,
.1.3.6.1.4.1.244.1.1.3.1.1,LANTRONIX-SLC-MIB::slcAuthLocalNumber,Integer32,read-only,,current,,The number of entries in the Local Users table.
.1.3.6.1.4.1.244.1.1.3.1.2,LANTRONIX-SLC-MIB::slcAuthLocalUsersTable,,not-accessible,,current,,Table of Local Users entries. The number of entries  is given by the value of slcAuthLocalNumber.
.1.3.6.1.4.1.244.1.1.3.1.2.1,LANTRONIX-SLC-MIB::slcAuthLocalUserEntry,,not-accessible,slcAuthLocalUserIndex,current,,An entry containing a Local Users and it's attributes.
.1.3.6.1.4.1.244.1.1.3.1.2.1.1,LANTRONIX-SLC-MIB::slcAuthLocalUserIndex,Integer32,read-only,,current,,Reference index for each Local User.
.1.3.6.1.4.1.244.1.1.3.1.2.1.2,LANTRONIX-SLC-MIB::slcAuthLocalUserLogin,OCTET,read-only,,current,,The login for the Local User. If the user account is locked  (cannot login), the login is appended with a '*' character.
.1.3.6.1.4.1.244.1.1.3.1.2.1.3,LANTRONIX-SLC-MIB::slcAuthLocalUserUID,Unsigned32,read-only,,current,,The unique user identifier number for the Local User.
.1.3.6.1.4.1.244.1.1.3.1.2.1.4,LANTRONIX-SLC-MIB::slcAuthLocalUserListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which the Local User has  permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.1.2.1.5,LANTRONIX-SLC-MIB::slcAuthLocalUserDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which the Local User has  permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.1.2.1.6,LANTRONIX-SLC-MIB::slcAuthLocalUserClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which the Local User has  permission to clear.
.1.3.6.1.4.1.244.1.1.3.1.2.1.7,LANTRONIX-SLC-MIB::slcAuthLocalUserEscapeSeq,OCTET,read-only,,current,,The character sequence which the Local User uses to terminate  connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.1.2.1.8,LANTRONIX-SLC-MIB::slcAuthLocalUserBreakSeq,OCTET,read-only,,current,,The character sequence which the Local User uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.1.2.1.9,LANTRONIX-SLC-MIB::slcAuthLocalUserMenu,OCTET,read-only,,current,,The custom user menu defined for the Local User. If this is  empty, there is no menu defined for the Local User. The menu  name is followed by a slash '/' character and either a 'y' if  the menu is automatically displayed at login, or a 'n' if it  is not automatically displayed at login.
.1.3.6.1.4.1.244.1.1.3.1.2.1.10,LANTRONIX-SLC-MIB::slcAuthLocalUserDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the Local User has permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.1.2.1.11,LANTRONIX-SLC-MIB::slcAuthLocalUserDialbackNum,OCTET,read-only,,current,,The dialback number defined for the Local User.
.1.3.6.1.4.1.244.1.1.3.1.2.1.12,LANTRONIX-SLC-MIB::slcAuthLocalUserGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to the Local User.
.1.3.6.1.4.1.244.1.1.3.1.2.1.13,LANTRONIX-SLC-MIB::slcAuthLocalUserRights,OCTET,read-only,,current,,The rights assigned to the Local User.
.1.3.6.1.4.1.244.1.1.3.1.2.1.14,LANTRONIX-SLC-MIB::slcAuthLocalUserPwdExpires,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the local user's password will expire.
.1.3.6.1.4.1.244.1.1.3.1.2.1.15,LANTRONIX-SLC-MIB::slcAuthLocalUserChangePwd,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the local user can change their password.
.1.3.6.1.4.1.244.1.1.3.1.2.1.16,LANTRONIX-SLC-MIB::slcAuthLocalUserChangePwdNextLogin,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the local user must change their password at  their next login.
.1.3.6.1.4.1.244.1.1.3.1.3,LANTRONIX-SLC-MIB::slcAuthLocalState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Local Users are used for authentication.
.1.3.6.1.4.1.244.1.1.3.1.4,LANTRONIX-SLC-MIB::slcAuthLocalOrder,Integer32,read-only,,current,,The authentication order of Local Users in authentication  methods.
.1.3.6.1.4.1.244.1.1.3.1.5,LANTRONIX-SLC-MIB::slcAuthLocalComplexPasswords,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Local Users are required to use complex passwords  that are at least 8 characters long and contain at least one  uppercase character, one lowercase character, one digit, and  one non-alphanumeric character.
.1.3.6.1.4.1.244.1.1.3.1.6,LANTRONIX-SLC-MIB::slcAuthLocalUseNextMethod,INTEGER,read-only,,current,disabled(1):enabled(2),This object applies to all authentication methods, not just  Local Users. If enabled, authentication will occur using  all methods, in the order of their precedence, until a  successful authentication occurs. If disabled, only the  first authentication method that responds will be used.
.1.3.6.1.4.1.244.1.1.3.1.7,LANTRONIX-SLC-MIB::slcAuthLocalAllowReuse,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, local users can reuse old passwords.
.1.3.6.1.4.1.244.1.1.3.1.8,LANTRONIX-SLC-MIB::slcAuthLocalReuseHistory,Integer32,read-only,,current,,The number of passwords a local user must use before reusing  an old password.
.1.3.6.1.4.1.244.1.1.3.1.9,LANTRONIX-SLC-MIB::slcAuthLocalPasswordLifetime,Integer32,read-only,,current,,The number of days until a password expires.
.1.3.6.1.4.1.244.1.1.3.1.10,LANTRONIX-SLC-MIB::slcAuthLocalWarningPeriod,Integer32,read-only,,current,,The number of days before a password expires that a local  user is warned about the expiring password. A value of 0  indicates that this feature is disabled.
.1.3.6.1.4.1.244.1.1.3.1.11,LANTRONIX-SLC-MIB::slcAuthLocalMaxLoginAttempts,Integer32,read-only,,current,,The number of times a local user can attempt to log in  unsuccessfully before the SLC locks the user out. A value  of 0 indicates that this feature is disabled.
.1.3.6.1.4.1.244.1.1.3.1.12,LANTRONIX-SLC-MIB::slcAuthLocalLockoutPeriod,Integer32,read-only,,current,,The number of minutes the locked-out user must wait before  trying to log in to to the SLC again. A value of 0 indicates  that this feature is disabled.
.1.3.6.1.4.1.244.1.1.3.1.13,LANTRONIX-SLC-MIB::slcAuthLocalMultipleSysadminLogins,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, multiple sysadmin logins to the web are allowed.
.1.3.6.1.4.1.244.1.1.3.1.14,LANTRONIX-SLC-MIB::slcAuthLocalSysadminConsoleOnly,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the sysadmin can only access the SLC via the  Console Port.
.1.3.6.1.4.1.244.1.1.3.2,LANTRONIX-SLC-MIB::slcAuthNIS,,,,,,
.1.3.6.1.4.1.244.1.1.3.2.1,LANTRONIX-SLC-MIB::slcAuthNISState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, NIS is used for authentication.
.1.3.6.1.4.1.244.1.1.3.2.2,LANTRONIX-SLC-MIB::slcAuthNISOrder,Integer32,read-only,,current,,The authentication order of NIS in remote authentication methods.
.1.3.6.1.4.1.244.1.1.3.2.3,LANTRONIX-SLC-MIB::slcAuthNISDomain,OCTET,read-only,,current,,The NIS domain.
.1.3.6.1.4.1.244.1.1.3.2.4,LANTRONIX-SLC-MIB::slcAuthNISBroadcast,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the SLC broadcasts for the NIS server.
.1.3.6.1.4.1.244.1.1.3.2.5,LANTRONIX-SLC-MIB::slcAuthNISMaster,IpAddress,read-only,,current,,The IP Address of the NIS master server.
.1.3.6.1.4.1.244.1.1.3.2.6,LANTRONIX-SLC-MIB::slcAuthNISSlave1,IpAddress,read-only,,current,,The IP Address of the NIS slave server #1.
.1.3.6.1.4.1.244.1.1.3.2.7,LANTRONIX-SLC-MIB::slcAuthNISSlave2,IpAddress,read-only,,current,,The IP Address of the NIS slave server #2.
.1.3.6.1.4.1.244.1.1.3.2.8,LANTRONIX-SLC-MIB::slcAuthNISSlave3,IpAddress,read-only,,current,,The IP Address of the NIS slave server #3.
.1.3.6.1.4.1.244.1.1.3.2.9,LANTRONIX-SLC-MIB::slcAuthNISGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to NIS users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.2.10,LANTRONIX-SLC-MIB::slcAuthNISRights,OCTET,read-only,,current,,The rights assigned to NIS users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.2.11,LANTRONIX-SLC-MIB::slcAuthNISMenu,OCTET,read-only,,current,,The custom user menu defined for all NIS users who login  to the SLC. If this is empty, there is no menu defined for  NIS Users.
.1.3.6.1.4.1.244.1.1.3.2.12,LANTRONIX-SLC-MIB::slcAuthNISListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via NIS have permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.2.13,LANTRONIX-SLC-MIB::slcAuthNISDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via NIS have permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.2.14,LANTRONIX-SLC-MIB::slcAuthNISClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via NIS have permission to clear.
.1.3.6.1.4.1.244.1.1.3.2.15,LANTRONIX-SLC-MIB::slcAuthNISSlave4,IpAddress,read-only,,current,,The IP Address of the NIS slave server #4.
.1.3.6.1.4.1.244.1.1.3.2.16,LANTRONIX-SLC-MIB::slcAuthNISSlave5,IpAddress,read-only,,current,,The IP Address of the NIS slave server #5.
.1.3.6.1.4.1.244.1.1.3.2.17,LANTRONIX-SLC-MIB::slcAuthNISEscapeSeq,OCTET,read-only,,current,,The character sequence which the NIS user uses to terminate  connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.2.18,LANTRONIX-SLC-MIB::slcAuthNISBreakSeq,OCTET,read-only,,current,,The character sequence which the NIS user uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.2.19,LANTRONIX-SLC-MIB::slcAuthNISDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, NIS users have permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.2.20,LANTRONIX-SLC-MIB::slcAuthNISDialbackNum,OCTET,read-only,,current,,The dialback number defined for NIS users.
.1.3.6.1.4.1.244.1.1.3.3,LANTRONIX-SLC-MIB::slcAuthLDAP,,,,,,
.1.3.6.1.4.1.244.1.1.3.3.1,LANTRONIX-SLC-MIB::slcAuthLDAPState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, LDAP is used for authentication.
.1.3.6.1.4.1.244.1.1.3.3.2,LANTRONIX-SLC-MIB::slcAuthLDAPOrder,Integer32,read-only,,current,,The authentication order of LDAP in remote authentication methods.
.1.3.6.1.4.1.244.1.1.3.3.3,LANTRONIX-SLC-MIB::slcAuthLDAPServer,IpAddress,read-only,,current,,The IP Address of the LDAP server.
.1.3.6.1.4.1.244.1.1.3.3.4,LANTRONIX-SLC-MIB::slcAuthLDAPBase,OCTET,read-only,,current,,The LDAP Base.
.1.3.6.1.4.1.244.1.1.3.3.5,LANTRONIX-SLC-MIB::slcAuthLDAPBindName,OCTET,read-only,,current,,The LDAP Bind Name.
.1.3.6.1.4.1.244.1.1.3.3.6,LANTRONIX-SLC-MIB::slcAuthLDAPPort,Integer32,read-only,,current,,The LDAP TCP Port Number.
.1.3.6.1.4.1.244.1.1.3.3.7,LANTRONIX-SLC-MIB::slcAuthLDAPADSupport,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Active Directory support is enabled for LDAP.
.1.3.6.1.4.1.244.1.1.3.3.8,LANTRONIX-SLC-MIB::slcAuthLDAPGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to LDAP users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.3.9,LANTRONIX-SLC-MIB::slcAuthLDAPRights,OCTET,read-only,,current,,The rights assigned to LDAP users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.3.10,LANTRONIX-SLC-MIB::slcAuthLDAPMenu,OCTET,read-only,,current,,The custom user menu defined for all LDAP users who login  to the SLC. If this is empty, there is no menu defined for  LDAP Users.
.1.3.6.1.4.1.244.1.1.3.3.11,LANTRONIX-SLC-MIB::slcAuthLDAPListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via LDAP have permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.3.12,LANTRONIX-SLC-MIB::slcAuthLDAPDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via LDAP have permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.3.13,LANTRONIX-SLC-MIB::slcAuthLDAPClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via LDAP have permission to clear.
.1.3.6.1.4.1.244.1.1.3.3.14,LANTRONIX-SLC-MIB::slcAuthLDAPEncrypt,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, encrypt messages between the SLC and the LDAP  server.
.1.3.6.1.4.1.244.1.1.3.3.15,LANTRONIX-SLC-MIB::slcAuthLDAPEscapeSeq,OCTET,read-only,,current,,The character sequence which the LDAP user uses to terminate  connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.3.16,LANTRONIX-SLC-MIB::slcAuthLDAPBreakSeq,OCTET,read-only,,current,,The character sequence which the LDAP user uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.3.17,LANTRONIX-SLC-MIB::slcAuthLDAPBindWithLogin,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, bind to the LDAP server using the current login  and password. The $login token in slcAuthLDAPBindName will  be replaced with the current login.
.1.3.6.1.4.1.244.1.1.3.3.18,LANTRONIX-SLC-MIB::slcAuthLDAPUseLDAPSchema,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, attributes and permissions for remote users are  retrieved from an LDAP server.
.1.3.6.1.4.1.244.1.1.3.3.19,LANTRONIX-SLC-MIB::slcAuthLDAPDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, LDAP users have permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.3.20,LANTRONIX-SLC-MIB::slcAuthLDAPDialbackNum,OCTET,read-only,,current,,The dialback number defined for LDAP users.
.1.3.6.1.4.1.244.1.1.3.4,LANTRONIX-SLC-MIB::slcAuthRADIUS,,,,,,
.1.3.6.1.4.1.244.1.1.3.4.1,LANTRONIX-SLC-MIB::slcAuthRADIUSState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, RADIUS is used for authentication.
.1.3.6.1.4.1.244.1.1.3.4.2,LANTRONIX-SLC-MIB::slcAuthRADIUSOrder,Integer32,read-only,,current,,The authentication order of RADIUS in remote authentication methods.
.1.3.6.1.4.1.244.1.1.3.4.3,LANTRONIX-SLC-MIB::slcAuthRADIUSTimeout,Integer32,read-only,,current,,The RADIUS Timeout in seconds. A value of 0 indicates  that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.3.4.4,LANTRONIX-SLC-MIB::slcAuthRADIUSServerTable,,not-accessible,,current,,Table of RADIUS servers.
.1.3.6.1.4.1.244.1.1.3.4.4.1,LANTRONIX-SLC-MIB::slcAuthRADIUSServerEntry,,not-accessible,slcAuthRADIUSServerIndex,current,,An entry containing a RADIUS server and it's parameters.
.1.3.6.1.4.1.244.1.1.3.4.4.1.1,LANTRONIX-SLC-MIB::slcAuthRADIUSServerIndex,Integer32,read-only,,current,,Reference index for each RADIUS server.
.1.3.6.1.4.1.244.1.1.3.4.4.1.2,LANTRONIX-SLC-MIB::slcAuthRADIUSServer,IpAddress,read-only,,current,,The IP Address of the RADIUS server.
.1.3.6.1.4.1.244.1.1.3.4.4.1.3,LANTRONIX-SLC-MIB::slcAuthRADIUSPort,Integer32,read-only,,current,,The RADIUS Server TCP Port Number.
.1.3.6.1.4.1.244.1.1.3.4.5,LANTRONIX-SLC-MIB::slcAuthRADIUSGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to RADIUS users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.4.6,LANTRONIX-SLC-MIB::slcAuthRADIUSRights,OCTET,read-only,,current,,The rights assigned to RADIUS users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.4.7,LANTRONIX-SLC-MIB::slcAuthRADIUSMenu,OCTET,read-only,,current,,The custom user menu defined for all RADIUS users who login  to the SLC. If this is empty, there is no menu defined for  RADIUS Users.
.1.3.6.1.4.1.244.1.1.3.4.8,LANTRONIX-SLC-MIB::slcAuthRADIUSListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via RADIUS have permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.4.9,LANTRONIX-SLC-MIB::slcAuthRADIUSDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via RADIUS have permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.4.10,LANTRONIX-SLC-MIB::slcAuthRADIUSClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via RADIUS have permission to clear.
.1.3.6.1.4.1.244.1.1.3.4.11,LANTRONIX-SLC-MIB::slcAuthRADIUSEscapeSeq,OCTET,read-only,,current,,The character sequence which the RADIUS user uses to terminate  connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.4.12,LANTRONIX-SLC-MIB::slcAuthRADIUSBreakSeq,OCTET,read-only,,current,,The character sequence which the RADIUS user uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.4.13,LANTRONIX-SLC-MIB::slcAuthRADIUSDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, RADIUS users have permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.4.14,LANTRONIX-SLC-MIB::slcAuthRADIUSDialbackNum,OCTET,read-only,,current,,The dialback number defined for RADIUS users.
.1.3.6.1.4.1.244.1.1.3.5,LANTRONIX-SLC-MIB::slcAuthKerberos,,,,,,
.1.3.6.1.4.1.244.1.1.3.5.1,LANTRONIX-SLC-MIB::slcAuthKerbState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Kerberos is used for authentication.
.1.3.6.1.4.1.244.1.1.3.5.2,LANTRONIX-SLC-MIB::slcAuthKerbOrder,Integer32,read-only,,current,,The authentication order of Kerberos in remote authentication methods.
.1.3.6.1.4.1.244.1.1.3.5.3,LANTRONIX-SLC-MIB::slcAuthKerbRealm,OCTET,read-only,,current,,The Kerberos Realm.
.1.3.6.1.4.1.244.1.1.3.5.4,LANTRONIX-SLC-MIB::slcAuthKerbKDC,OCTET,read-only,,current,,The Kerberos KDC.
.1.3.6.1.4.1.244.1.1.3.5.5,LANTRONIX-SLC-MIB::slcAuthKerbKDCIP,IpAddress,read-only,,current,,The IP Address of the Kerberos Key Distribution Server.
.1.3.6.1.4.1.244.1.1.3.5.6,LANTRONIX-SLC-MIB::slcAuthKerbKDCPort,Integer32,read-only,,current,,The Kerberos KDC Port Number.
.1.3.6.1.4.1.244.1.1.3.5.7,LANTRONIX-SLC-MIB::slcAuthKerbUseLDAP,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, LDAP is used for lookups.
.1.3.6.1.4.1.244.1.1.3.5.8,LANTRONIX-SLC-MIB::slcAuthKerbGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to Kerberos users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.5.9,LANTRONIX-SLC-MIB::slcAuthKerbRights,OCTET,read-only,,current,,The rights assigned to Kerberos users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.5.10,LANTRONIX-SLC-MIB::slcAuthKerbMenu,OCTET,read-only,,current,,The custom user menu defined for all Kerberos users who login  to the SLC. If this is empty, there is no menu defined for  Kerberos Users.
.1.3.6.1.4.1.244.1.1.3.5.11,LANTRONIX-SLC-MIB::slcAuthKerbListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via Kerberos have permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.5.12,LANTRONIX-SLC-MIB::slcAuthKerbDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via Kerberos have permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.5.13,LANTRONIX-SLC-MIB::slcAuthKerbClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via Kerberos have permission to clear.
.1.3.6.1.4.1.244.1.1.3.5.14,LANTRONIX-SLC-MIB::slcAuthKerbEscapeSeq,OCTET,read-only,,current,,The character sequence which the Kerberos user uses to  terminate connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.5.15,LANTRONIX-SLC-MIB::slcAuthKerbBreakSeq,OCTET,read-only,,current,,The character sequence which the Kerberos user uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.5.16,LANTRONIX-SLC-MIB::slcAuthKerbDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Kerberos users have permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.5.17,LANTRONIX-SLC-MIB::slcAuthKerbDialbackNum,OCTET,read-only,,current,,The dialback number defined for Kerberos users.
.1.3.6.1.4.1.244.1.1.3.6,LANTRONIX-SLC-MIB::slcAuthTACACS,,,,,,
.1.3.6.1.4.1.244.1.1.3.6.1,LANTRONIX-SLC-MIB::slcAuthTACACSState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, TACACS is used for authentication.
.1.3.6.1.4.1.244.1.1.3.6.2,LANTRONIX-SLC-MIB::slcAuthTACACSOrder,Integer32,read-only,,current,,The authentication order of TACACS in remote authentication methods.
.1.3.6.1.4.1.244.1.1.3.6.3,LANTRONIX-SLC-MIB::slcAuthTACACSServer,IpAddress,read-only,,current,,The IP Address of the first TACACS server.
.1.3.6.1.4.1.244.1.1.3.6.4,LANTRONIX-SLC-MIB::slcAuthTACACSEncrypt,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, encrypt messages between the SLC and the TACACS server.
.1.3.6.1.4.1.244.1.1.3.6.5,LANTRONIX-SLC-MIB::slcAuthTACACSGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to TACACS users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.6.6,LANTRONIX-SLC-MIB::slcAuthTACACSRights,OCTET,read-only,,current,,The rights assigned to TACACS users who login to the SLC and  do not have group/rights defined in the Remote User database.
.1.3.6.1.4.1.244.1.1.3.6.7,LANTRONIX-SLC-MIB::slcAuthTACACSMenu,OCTET,read-only,,current,,The custom user menu defined for all TACACS users who login  to the SLC. If this is empty, there is no menu defined for  TACACS Users.
.1.3.6.1.4.1.244.1.1.3.6.8,LANTRONIX-SLC-MIB::slcAuthTACACSListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via TACACS have permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.6.9,LANTRONIX-SLC-MIB::slcAuthTACACSDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via TACACS have permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.6.10,LANTRONIX-SLC-MIB::slcAuthTACACSClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which users authenticated  via TACACS have permission to clear.
.1.3.6.1.4.1.244.1.1.3.6.11,LANTRONIX-SLC-MIB::slcAuthTACACSServer2,IpAddress,read-only,,current,,The IP Address of the second TACACS server.
.1.3.6.1.4.1.244.1.1.3.6.12,LANTRONIX-SLC-MIB::slcAuthTACACSServer3,IpAddress,read-only,,current,,The IP Address of the third TACACS server.
.1.3.6.1.4.1.244.1.1.3.6.13,LANTRONIX-SLC-MIB::slcAuthTACACSEscapeSeq,OCTET,read-only,,current,,The character sequence which the TACACS user uses to terminate  connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.6.14,LANTRONIX-SLC-MIB::slcAuthTACACSBreakSeq,OCTET,read-only,,current,,The character sequence which the TACACS user uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.6.15,LANTRONIX-SLC-MIB::slcAuthTACACSDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, TACACS users have permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.6.16,LANTRONIX-SLC-MIB::slcAuthTACACSDialbackNum,OCTET,read-only,,current,,The dialback number defined for TACACS users.
.1.3.6.1.4.1.244.1.1.3.7,LANTRONIX-SLC-MIB::slcAuthRemote,,,,,,
.1.3.6.1.4.1.244.1.1.3.7.1,LANTRONIX-SLC-MIB::slcAuthRemoteNumber,Integer32,read-only,,current,,The number of entries in the Remote Users table.
.1.3.6.1.4.1.244.1.1.3.7.2,LANTRONIX-SLC-MIB::slcAuthRemoteUsersTable,,not-accessible,,current,,Table of Remote Users entries. The number of entries  is given by the value of slcAuthRemoteNumber.
.1.3.6.1.4.1.244.1.1.3.7.2.1,LANTRONIX-SLC-MIB::slcAuthRemoteUserEntry,,not-accessible,slcAuthRemoteUserIndex,current,,An entry containing a Remote User and its attributes.
.1.3.6.1.4.1.244.1.1.3.7.2.1.1,LANTRONIX-SLC-MIB::slcAuthRemoteUserIndex,Integer32,read-only,,current,,Reference index for each Remote User.
.1.3.6.1.4.1.244.1.1.3.7.2.1.2,LANTRONIX-SLC-MIB::slcAuthRemoteUserLogin,OCTET,read-only,,current,,The login for the Remote User.
.1.3.6.1.4.1.244.1.1.3.7.2.1.3,LANTRONIX-SLC-MIB::slcAuthRemoteUserGroup,INTEGER,read-only,,current,default(1):power(2):administrators(3),The group assigned to the Remote User.
.1.3.6.1.4.1.244.1.1.3.7.2.1.4,LANTRONIX-SLC-MIB::slcAuthRemoteUserRights,OCTET,read-only,,current,,The rights assigned to the Remote User.
.1.3.6.1.4.1.244.1.1.3.7.2.1.5,LANTRONIX-SLC-MIB::slcAuthRemoteUserListenPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which the Remote User has  permission to access via 'connect listen'.
.1.3.6.1.4.1.244.1.1.3.7.2.1.6,LANTRONIX-SLC-MIB::slcAuthRemoteUserDataPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which the Remote User has  permission to access via 'connect direct'.
.1.3.6.1.4.1.244.1.1.3.7.2.1.7,LANTRONIX-SLC-MIB::slcAuthRemoteUserClearPorts,OCTET,read-only,,current,,The Device Ports and PC Card slots which the Remote User has  permission to clear.
.1.3.6.1.4.1.244.1.1.3.7.2.1.8,LANTRONIX-SLC-MIB::slcAuthRemoteUserEscapeSeq,OCTET,read-only,,current,,The character sequence which the Remote User uses to terminate  connections to Device Ports.
.1.3.6.1.4.1.244.1.1.3.7.2.1.9,LANTRONIX-SLC-MIB::slcAuthRemoteUserBreakSeq,OCTET,read-only,,current,,The character sequence which the Remote User uses to send a  break sequence.
.1.3.6.1.4.1.244.1.1.3.7.2.1.10,LANTRONIX-SLC-MIB::slcAuthRemoteUserMenu,OCTET,read-only,,current,,The custom user menu defined for the Remote User. If this is  empty, there is no menu defined for the Remote User. The menu  name is followed by a slash '/' character and either a 'y' if  the menu is automatically displayed at login, or a 'n' if it  is not automatically displayed at login.
.1.3.6.1.4.1.244.1.1.3.7.2.1.11,LANTRONIX-SLC-MIB::slcAuthRemoteUserLocked,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the Remote User's account is locked (blocked).
.1.3.6.1.4.1.244.1.1.3.7.2.1.12,LANTRONIX-SLC-MIB::slcAuthRemoteUserDialback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the Remote User has permission to use modem dialback.
.1.3.6.1.4.1.244.1.1.3.7.2.1.13,LANTRONIX-SLC-MIB::slcAuthRemoteUserDialbackNum,OCTET,read-only,,current,,The dialback number defined for the Remote User.
.1.3.6.1.4.1.244.1.1.3.7.3,LANTRONIX-SLC-MIB::slcAuthRemoteAuthListOnly,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, remote users who log into the SLC will only be  authenticated if they are listed in the remote user list.
.1.3.6.1.4.1.244.1.1.4,LANTRONIX-SLC-MIB::slcDevices,,,,,,
.1.3.6.1.4.1.244.1.1.4.1,LANTRONIX-SLC-MIB::slcDevConsolePort,,,,,,
.1.3.6.1.4.1.244.1.1.4.1.1,LANTRONIX-SLC-MIB::slcDevConBaud,Integer32,read-only,,current,,The baud rate of the Console Port.
.1.3.6.1.4.1.244.1.1.4.1.2,LANTRONIX-SLC-MIB::slcDevConDataBits,Integer32,read-only,,current,,The data bits of the Console Port.
.1.3.6.1.4.1.244.1.1.4.1.3,LANTRONIX-SLC-MIB::slcDevConStopBits,Integer32,read-only,,current,,The stop bits of the Console Port.
.1.3.6.1.4.1.244.1.1.4.1.4,LANTRONIX-SLC-MIB::slcDevConParity,INTEGER,read-only,,current,none(1):odd(2):even(3),The parity of the Console Port.
.1.3.6.1.4.1.244.1.1.4.1.5,LANTRONIX-SLC-MIB::slcDevConFlowControl,INTEGER,read-only,,current,none(1):xonxoff(2):rtscts(3),The flow control of the Console Port.
.1.3.6.1.4.1.244.1.1.4.1.6,LANTRONIX-SLC-MIB::slcDevConTimeout,Integer32,read-only,,current,,The timeout (in minutes) for logins to the Console Port.  A value of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.4.1.7,LANTRONIX-SLC-MIB::slcDevConShowLines,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, upon connecting to the Console Port, a series of  characters (or lines) output to the Console Port before it  was connected to are displayed.
.1.3.6.1.4.1.244.1.1.4.1.8,LANTRONIX-SLC-MIB::slcDevConNumberShowLines,Integer32,read-only,,current,,If slcDevConShowLines is enabled, the number of lines that  are displayed upon connecting to the Console Port.
.1.3.6.1.4.1.244.1.1.4.2,LANTRONIX-SLC-MIB::slcDevDevicePorts,,,,,,
.1.3.6.1.4.1.244.1.1.4.2.1,LANTRONIX-SLC-MIB::slcDevPortGlobal,,,,,,
.1.3.6.1.4.1.244.1.1.4.2.1.1,LANTRONIX-SLC-MIB::slcDevGlobalListenPorts,OCTET,read-only,,obsolete,,The Device Ports which remotely authenticated users have  permission to access via 'connect listen'. This object has  been replaced by permissions for each remote authentication  method: slcAuthNISListenPorts, slcAuthLDAPListenPorts,  slcAuthRADIUSListenPorts, slcAuthKerbListenPorts,  slcAuthTACACSListenPorts.
.1.3.6.1.4.1.244.1.1.4.2.1.2,LANTRONIX-SLC-MIB::slcDevGlobalDataPorts,OCTET,read-only,,obsolete,,The Device Ports which remotely authenticated users have  permission to access via 'connect direct'. This object has  been replaced by permissions for each remote authentication  method: slcAuthNISDataPorts, slcAuthLDAPDataPorts,  slcAuthRADIUSDataPorts, slcAuthKerbDataPorts,  slcAuthTACACSDataPorts.
.1.3.6.1.4.1.244.1.1.4.2.1.3,LANTRONIX-SLC-MIB::slcDevGlobalClearPorts,OCTET,read-only,,obsolete,,The Device Ports which remotely authenticated users have  permission to clear. This object has been replaced by  permissions for each remote authentication method:  slcAuthNISClearPorts, slcAuthLDAPClearPorts,  slcAuthRADIUSClearPorts, slcAuthKerbClearPorts,  slcAuthTACACSClearPorts.
.1.3.6.1.4.1.244.1.1.4.2.1.4,LANTRONIX-SLC-MIB::slcDevGlobalStartTelnetPort,Integer32,read-only,,current,,The starting TCP port for Telnet in connections  to Device Ports.
.1.3.6.1.4.1.244.1.1.4.2.1.5,LANTRONIX-SLC-MIB::slcDevGlobalStartSSHPort,Integer32,read-only,,current,,The starting TCP port for SSH in connections  to Device Ports.
.1.3.6.1.4.1.244.1.1.4.2.1.6,LANTRONIX-SLC-MIB::slcDevGlobalStartTCPPort,Integer32,read-only,,current,,The starting TCP port for TCP in connections  to Device Ports.
.1.3.6.1.4.1.244.1.1.4.2.1.7,LANTRONIX-SLC-MIB::slcDevGlobalMaxDirect,Integer32,read-only,,obsolete,,The maximum number of direct connects allowed for each  Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2,LANTRONIX-SLC-MIB::slcDevPortConfig,,,,,,
.1.3.6.1.4.1.244.1.1.4.2.2.1,LANTRONIX-SLC-MIB::slcDevPortCfgNumber,Integer32,read-only,,current,,The number of entries in the Device Port Configuration table.
.1.3.6.1.4.1.244.1.1.4.2.2.2,LANTRONIX-SLC-MIB::slcDevPortCfgTable,,not-accessible,,current,,Table for managing Device Port configuration. The number of  entries is given by the value of slcDevPortCfgNumber.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1,LANTRONIX-SLC-MIB::slcDevPortCfgEntry,,not-accessible,slcDevPortId,current,,An entry containing all configuration settings for a Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.1,LANTRONIX-SLC-MIB::slcDevPortId,Integer32,read-only,,current,,The identifier for a Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.2,LANTRONIX-SLC-MIB::slcDevPortCfgName,OCTET,read-only,,current,,The name of the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.3,LANTRONIX-SLC-MIB::slcDevPortCfgDevice,INTEGER,read-only,,current,none(1):slp8(2):slp16(3):slp8Exp8(4):slp8Exp16(5):slp16Exp8(6):slp16Exp16(7):sensorsoft(8),The device that is connected to the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.4,LANTRONIX-SLC-MIB::slcDevPortCfgDevLogin,OCTET,read-only,,current,,The login used to authenticate to the device connected  to the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.5,LANTRONIX-SLC-MIB::slcDevPortCfgBreakSeq,OCTET,read-only,,current,,The character sequence for the Device Port to send a break.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.6,LANTRONIX-SLC-MIB::slcDevPortCfgTelnetState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Telnet connections to the Device Port are allowed.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.7,LANTRONIX-SLC-MIB::slcDevPortCfgTelnetPort,Integer32,read-only,,current,,TCP Port number for Telnet in connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.8,LANTRONIX-SLC-MIB::slcDevPortCfgTelnetAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the user is required to authenticate to access  a Device Port with Telnet.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.9,LANTRONIX-SLC-MIB::slcDevPortCfgSSHState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, SSH connections to the Device Port are allowed.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.10,LANTRONIX-SLC-MIB::slcDevPortCfgSSHPort,Integer32,read-only,,current,,TCP Port number for SSH in connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.11,LANTRONIX-SLC-MIB::slcDevPortCfgSSHAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the user is required to authenticate to access  a Device Port with SSH.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.12,LANTRONIX-SLC-MIB::slcDevPortCfgTCPState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, TCP connections to the Device Port are allowed.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.13,LANTRONIX-SLC-MIB::slcDevPortCfgTCPPort,Integer32,read-only,,current,,TCP Port number for TCP in connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.14,LANTRONIX-SLC-MIB::slcDevPortCfgTCPAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the user is required to authenticate to access  a Device Port with TCP.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.15,LANTRONIX-SLC-MIB::slcDevPortCfgIP,IpAddress,read-only,,current,,The IP Address for Telnet, SSH or TCP in to a Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.16,LANTRONIX-SLC-MIB::slcDevPortCfgBaud,Integer32,read-only,,current,,The baud rate of the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.17,LANTRONIX-SLC-MIB::slcDevPortCfgDataBits,Integer32,read-only,,current,,The data bits of the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.18,LANTRONIX-SLC-MIB::slcDevPortCfgStopBits,Integer32,read-only,,current,,The stop bits of the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.19,LANTRONIX-SLC-MIB::slcDevPortCfgParity,INTEGER,read-only,,current,none(1):odd(2):even(3),The parity of the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.20,LANTRONIX-SLC-MIB::slcDevPortCfgFlowControl,INTEGER,read-only,,current,none(1):xonxoff(2):rtscts(3),The flow control of the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.21,LANTRONIX-SLC-MIB::slcDevPortCfgLogins,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, authentication is required to access a serial  device connected to a Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.22,LANTRONIX-SLC-MIB::slcDevPortCfgConnectDSR,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the Device Port only establishes a connection if  DSR (Data Set Ready) transitions to an asserted state.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.23,LANTRONIX-SLC-MIB::slcDevPortCfgDisconnectDSR,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, and a connection to a Device Port is currently  in session, the connection will be terminated if DSR (Data  Set Ready) transitions to a de-asserted state.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.24,LANTRONIX-SLC-MIB::slcDevPortCfgModemState,INTEGER,read-only,,current,disabled(1):dialout(2):dialin(3):dialback(4):dialondemand(5):dialinAndDialondemand(6):dialinHostList(7):cbcpServer(8):cbcpClient(9),For an external modem attached to the Device Port, indicates  how the modem will be used.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.25,LANTRONIX-SLC-MIB::slcDevPortCfgModemMode,INTEGER,read-only,,current,ppp(1):text(2),For an external modem attached to the Device Port, the  mode: PPP (for Dial-in and Dial-out) and text (for Dial-in  and Dial-back).
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.26,LANTRONIX-SLC-MIB::slcDevPortCfgLocalIP,IpAddress,read-only,,current,,For PPP connections, the local IP Address - all zeros if it  should be negotiated.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.27,LANTRONIX-SLC-MIB::slcDevPortCfgRemoteIP,IpAddress,read-only,,current,,For PPP connections, the remote IP Address - all zeros if it  should be negotiated.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.28,LANTRONIX-SLC-MIB::slcDevPortCfgAuth,INTEGER,read-only,,current,pap(1):chap(2),For PPP connections, the type of authentication to be used.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.29,LANTRONIX-SLC-MIB::slcDevPortCfgCHAPHost,OCTET,read-only,,current,,For PPP connections with CHAP authentication, the host (for  Unix) or user (for Windows) to use.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.30,LANTRONIX-SLC-MIB::slcDevPortCfgInitScript,OCTET,read-only,,current,,The initialization script for an external modem.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.31,LANTRONIX-SLC-MIB::slcDevPortCfgTimeout,Integer32,read-only,,current,,The timeout (in minutes) for text connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.32,LANTRONIX-SLC-MIB::slcDevPortCfgDialoutNum,OCTET,read-only,,current,,The phone number to use for dial-out connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.33,LANTRONIX-SLC-MIB::slcDevPortCfgDialoutLogin,OCTET,read-only,,current,,The login to use for dial-out connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.34,LANTRONIX-SLC-MIB::slcDevPortCfgDialbackMode,INTEGER,read-only,,current,usernumber(1):fixed(2),For dial-back connections, defines the phone number to call:  a number associated with the authenticated user, or a fixed  number associated with the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.35,LANTRONIX-SLC-MIB::slcDevPortCfgDialbackNum,OCTET,read-only,,current,,The phone number to use for dial-back connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.36,LANTRONIX-SLC-MIB::slcDevPortCfgNATState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, use NAT (Network Address Translation) to allow  dial-in and dial-back users to access the network connected  to Eth1 and Eth2.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.37,LANTRONIX-SLC-MIB::slcDevPortCfgLocalState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, local logging is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.38,LANTRONIX-SLC-MIB::slcDevPortCfgNFSFileState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, NFS File logging is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.39,LANTRONIX-SLC-MIB::slcDevPortCfgNFSDir,OCTET,read-only,,current,,The local directory of a NFS mount to use for logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.40,LANTRONIX-SLC-MIB::slcDevPortCfgNFSMaxFiles,Integer32,read-only,,current,,The maximum number of files to use for NFS file logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.41,LANTRONIX-SLC-MIB::slcDevPortCfgNFSMaxSize,Integer32,read-only,,current,,The maximum size of each file (in bytes) for NFS File logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.42,LANTRONIX-SLC-MIB::slcDevPortCfgEmailState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Email logging is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.43,LANTRONIX-SLC-MIB::slcDevPortCfgEmailTrigger,INTEGER,read-only,,current,bytecnt(1):textstring(2),The type of trigger to use for email notification - specified  number of bytes received, or specified text string received.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.44,LANTRONIX-SLC-MIB::slcDevPortCfgEmailByteThresh,Integer32,read-only,,current,,For a byte count trigger, the number of bytes required to  trigger an email notification.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.45,LANTRONIX-SLC-MIB::slcDevPortCfgEmailDelay,Integer32,read-only,,current,,For a byte count trigger, once the number of bytes has been  received, the number of seconds to wait before sending the email notification.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.46,LANTRONIX-SLC-MIB::slcDevPortCfgEmailRestartDelay,Integer32,read-only,,current,,For a byte count trigger, once the email notification has  been send, the number of seconds to wait before restarting  the byte count process.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.47,LANTRONIX-SLC-MIB::slcDevPortCfgEmailTextString,OCTET,read-only,,current,,For a text string trigger, the text string to parse for.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.48,LANTRONIX-SLC-MIB::slcDevPortCfgEmailTo,OCTET,read-only,,current,,List of emails to send email notification to.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.49,LANTRONIX-SLC-MIB::slcDevPortCfgEmailSubject,OCTET,read-only,,current,,Subject to include with email notification.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.50,LANTRONIX-SLC-MIB::slcDevPortCfgPCCardState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, PC Card logging is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.51,LANTRONIX-SLC-MIB::slcDevPortCfgPCCardLogTo,INTEGER,read-only,,current,upperSlot(1):lowerSlot(2),For PC Card logging, which PC Card slot to use for logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.52,LANTRONIX-SLC-MIB::slcDevPortCfgPCCardMaxFiles,Integer32,read-only,,current,,The maximum number of files to use for PC Card logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.53,LANTRONIX-SLC-MIB::slcDevPortCfgPCCardMaxSize,Integer32,read-only,,current,,The maximum size of each file (in bytes) for PC Card logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.54,LANTRONIX-SLC-MIB::slcDevPortCfgAction,INTEGER,read-write,,current,noAction(1):zeroPortCounters(2):clearLocalLog(3):terminateConnections(4),Performs an action on a Device Port. A read of this object  always returns the value noAction(1). Setting this object  to zeroPortCounters(2) will reset all port counters given in  slcDevPortStateTable. Setting this object to clearLocalLog(3)  will clear the local logging buffer. Setting this object to  terminateConnections(4) will terminate all connections  associated with the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.55,LANTRONIX-SLC-MIB::slcDevPortCfgEmailSend,INTEGER,read-only,,current,email(1):snmptrap(2):both(3),When a trigger is received, the type of notification to send:  email, SNMP trap, or email and SNMP trap.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.56,LANTRONIX-SLC-MIB::slcDevPortCfgBanner,OCTET,read-only,,current,,The banner displayed when the Device Port is connected to via  SSH or Telnet.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.57,LANTRONIX-SLC-MIB::slcDevPortCfgIdleTimeout,Integer32,read-only,,current,,The timeout (in seconds) for dial-in and dial-on-demand PPP  connections. If no traffic is received for the PPP connection  in the time defined by the idle timeout, the PPP connection  will be terminated. A value of 0 indicates that timeouts are  disabled.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.58,LANTRONIX-SLC-MIB::slcDevPortCfgRestartDelay,Integer32,read-only,,current,,The delay (in seconds) to wait before restarting dial-out or  dial-on-demand PPP connections.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.59,LANTRONIX-SLC-MIB::slcDevPortCfgCallerIdLogging,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, caller id logging is enabled for a modem dial-in  connection.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.60,LANTRONIX-SLC-MIB::slcDevPortCfgCallerIdATCmd,OCTET,read-only,,current,,The modem AT command required to initiate caller id logging  by the modem.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.61,LANTRONIX-SLC-MIB::slcDevPortCfgDODAuth,INTEGER,read-only,,current,pap(1):chap(2),For PPP connections that are configured for both Dial-in and  Dial-on-Demand, the type of authentication to be used for  Dial-on-Demand.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.62,LANTRONIX-SLC-MIB::slcDevPortCfgDODCHAPHost,OCTET,read-only,,current,,For PPP connections that are configured for both Dial-in and  Dial-on-Demand, with CHAP authentication for Dial-on-Demand,  the host (for Unix) or user (for Windows) to use.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.63,LANTRONIX-SLC-MIB::slcDevPortCfgSLMLoggingState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, SLM logging is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.64,LANTRONIX-SLC-MIB::slcDevPortCfgSLMNMS,OCTET,read-only,,current,,The IP Addresses of up to three SNMP Network Management  Stations defined used for SLM Logging. Multiple IP Addresses  will be separated by a comma.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.65,LANTRONIX-SLC-MIB::slcDevPortCfgSLMByteThresh,Integer32,read-only,,current,,The number of bytes required to trigger SLM logging.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.66,LANTRONIX-SLC-MIB::slcDevPortCfgSLMTimeFrame,Integer32,read-only,,current,,The time frame for SLM logging, in seconds.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.67,LANTRONIX-SLC-MIB::slcDevPortCfgWebColumns,Integer32,read-only,,current,,The number of columns in the Web SSH or Telnet window for  this Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.68,LANTRONIX-SLC-MIB::slcDevPortCfgWebRows,Integer32,read-only,,current,,The number of rows in the Web SSH or Telnet window for  this Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.69,LANTRONIX-SLC-MIB::slcDevPortCfgSyslogState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Syslog logging is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.70,LANTRONIX-SLC-MIB::slcDevPortCfgHostList,OCTET,read-only,,current,,When slcDevPortCfgModemState is set to dialinHostList, the  name of the Host List used for Dial-in.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.71,LANTRONIX-SLC-MIB::slcDevPortCfgDevLowTemp,Integer32,read-only,,current,,The low temperature limit, in Celsius, for the device  connected to this Device Port. If the temperature is not  applicable, 9999 will be returned.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.72,LANTRONIX-SLC-MIB::slcDevPortCfgDevHighTemp,Integer32,read-only,,current,,The high temperature limit, in Celsius, for the device  connected to this Device Port. If the temperature is not  applicable, 9999 will be returned.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.73,LANTRONIX-SLC-MIB::slcDevPortCfgDevTemperature,OCTET,read-only,,current,,The actual temperature, in Celsius, for the device  connected to this Device Port. If the temperature is not  applicable, an empty string will be returned.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.74,LANTRONIX-SLC-MIB::slcDevPortCfgDevLowHumidity,Integer32,read-only,,current,,The low humidty limit, in percentage, for the device  connected to this Device Port. If the temperature is not  applicable, 9999 will be returned.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.75,LANTRONIX-SLC-MIB::slcDevPortCfgDevHighHumidity,Integer32,read-only,,current,,The high humidty limit, in percentage, for the device  connected to this Device Port. If the temperature is not  applicable, 9999 will be returned.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.76,LANTRONIX-SLC-MIB::slcDevPortCfgDevHumidity,OCTET,read-only,,current,,The actual humidity, in percentage, for the device  connected to this Device Port. If the temperature is not  applicable, an empty string will be returned.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.77,LANTRONIX-SLC-MIB::slcDevPortCfgDevTraps,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, traps will be sent when one of the limits for the  device connected to this Device Port are exceeded.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.78,LANTRONIX-SLC-MIB::slcDevPortCfgShowLines,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, upon connecting to the Device Port, a series of  characters (or lines) output to the Device Port before it  was connected to are displayed.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.79,LANTRONIX-SLC-MIB::slcDevPortCfgNumberShowLines,Integer32,read-only,,current,,If slcDevPortCfgShowLines is enabled, the number of lines that  are displayed upon connecting to the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.80,LANTRONIX-SLC-MIB::slcDevPortCfgViewPortLog,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, upon using 'connect direct' to a Device Port,  the slcDevPortCfgPortLogSeq key sequence can be typed to  view the end of the port log for the current Device Port,  or a different Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.81,LANTRONIX-SLC-MIB::slcDevPortCfgPortLogSeq,OCTET,read-only,,current,,The character sequence to view the port log for the Device  Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.82,LANTRONIX-SLC-MIB::slcDevPortCfgMaxDirectConnects,Integer32,read-only,,current,,The maximum number of direct connects at the CLI for the  Device Port.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.83,LANTRONIX-SLC-MIB::slcDevPortCfgTelnetTimeout,Integer32,read-only,,current,,The timeout (in seconds) for Telnet connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.84,LANTRONIX-SLC-MIB::slcDevPortCfgSSHTimeout,Integer32,read-only,,current,,The timeout (in seconds) for SSH connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.85,LANTRONIX-SLC-MIB::slcDevPortCfgTCPTimeout,Integer32,read-only,,current,,The timeout (in seconds) for TCP connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.86,LANTRONIX-SLC-MIB::slcDevPortCfgCBCPClientType,INTEGER,read-only,,current,adminDefined(1):userDefined(2),When slcDevPortCfgModemState is set to cbcpClient, the  preferred type of dialback number to use for CBCP negotiation.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.87,LANTRONIX-SLC-MIB::slcDevPortCfgCBCPServerAllowNoCallback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled and slcDevPortCfgModemState is set to cbcpServer,  the SLC will allow the PPP peer to select the No Callback  option during CBCP negotiation.
.1.3.6.1.4.1.244.1.1.4.2.2.2.1.88,LANTRONIX-SLC-MIB::slcDevPortCfgDialbackDelay,Integer32,read-only,,current,,When slcDevPortCfgModemState is set to dialback, cbcpServer  or cbcpClient, specifies the delay between the dial-in and  dial-out portion of the dialing sequence.
.1.3.6.1.4.1.244.1.1.4.2.3,LANTRONIX-SLC-MIB::slcDevPortState,,,,,,
.1.3.6.1.4.1.244.1.1.4.2.3.1,LANTRONIX-SLC-MIB::slcDevPortStateNumber,Integer32,read-only,,current,,The number of entries in the Device Port State table.
.1.3.6.1.4.1.244.1.1.4.2.3.2,LANTRONIX-SLC-MIB::slcDevPortStateTable,,not-accessible,,current,,Table of Device Port state entries. The number of  entries is given by the value of slcDevPortStateNumber.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1,LANTRONIX-SLC-MIB::slcDevPortStateEntry,,not-accessible,slcDevPortStateIndex,current,,An entry containing all state information for a Device Port.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.1,LANTRONIX-SLC-MIB::slcDevPortStateIndex,Integer32,read-only,,current,,Reference index for each Device Port State entry.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.2,LANTRONIX-SLC-MIB::slcDevPortStateBytesInput,Integer32,read-only,,current,,The number of bytes input to the Device Port since boot or  the last time Device Port statistics were zeroed.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.3,LANTRONIX-SLC-MIB::slcDevPortStateBytesOutput,Integer32,read-only,,current,,The number of bytes output from the Device Port since boot or  the last time Device Port statistics were zeroed.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.4,LANTRONIX-SLC-MIB::slcDevPortStateFramingErrors,Integer32,read-only,,current,,The number of framing errors for the Device Port since boot or  the last time Device Port statistics were zeroed.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.5,LANTRONIX-SLC-MIB::slcDevPortStateParityErrors,Integer32,read-only,,current,,The number of parity errors for the Device Port since boot or  the last time Device Port statistics were zeroed.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.6,LANTRONIX-SLC-MIB::slcDevPortStateOverrunErrors,Integer32,read-only,,current,,The number of overrun errors for the Device Port since boot or  the last time Device Port statistics were zeroed.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.7,LANTRONIX-SLC-MIB::slcDevPortStateFlowControlViolations,Integer32,read-only,,current,,The number of flow control violations for the Device Port  since boot or the last time Device Port statistics were  zeroed.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.8,LANTRONIX-SLC-MIB::slcDevPortStateDSR,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Data Set Ready is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.9,LANTRONIX-SLC-MIB::slcDevPortStateDTR,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Data Terminal Ready is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.10,LANTRONIX-SLC-MIB::slcDevPortStateCTS,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Clear To Send is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.11,LANTRONIX-SLC-MIB::slcDevPortStateRTS,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Request To Send is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.2.3.2.1.12,LANTRONIX-SLC-MIB::slcDevPortStateCD,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Carrier Detect is enabled for the Device Port.
.1.3.6.1.4.1.244.1.1.4.3,LANTRONIX-SLC-MIB::slcDevPCCard,,,,,,
.1.3.6.1.4.1.244.1.1.4.3.1,LANTRONIX-SLC-MIB::slcPCCardCfgTable,,not-accessible,,current,,Table of Device Port configuration entries. There are two  entries in the table, index (1) for the upper PC Card slot,  and index (2) for the lower PC Card slot.
.1.3.6.1.4.1.244.1.1.4.3.1.1,LANTRONIX-SLC-MIB::slcPCCardCfgEntry,,not-accessible,slcPCCardCfgIndex,current,,An entry containing all configuration settings for a PC Card Slot.
.1.3.6.1.4.1.244.1.1.4.3.1.1.1,LANTRONIX-SLC-MIB::slcPCCardCfgIndex,Integer32,read-only,,current,,Reference index for each PC Card Configuration entry.
.1.3.6.1.4.1.244.1.1.4.3.1.1.2,LANTRONIX-SLC-MIB::slcPCCardCfgCardType,INTEGER,read-only,,current,none(1):storage(2):modem(3):isdn(4):wireless(5):gsmmodem(6),The type of PC Card in the slot.
.1.3.6.1.4.1.244.1.1.4.3.1.1.3,LANTRONIX-SLC-MIB::slcPCCardCfgCardId,OCTET,read-only,,current,,The identifying string of the card in the slot.
.1.3.6.1.4.1.244.1.1.4.3.1.1.4,LANTRONIX-SLC-MIB::slcPCCardCfgBaud,Integer32,read-only,,current,,For ISDN and modem cards, the baud rate.
.1.3.6.1.4.1.244.1.1.4.3.1.1.5,LANTRONIX-SLC-MIB::slcPCCardCfgDataBits,Integer32,read-only,,current,,For ISDN and modem cards, the data bits.
.1.3.6.1.4.1.244.1.1.4.3.1.1.6,LANTRONIX-SLC-MIB::slcPCCardCfgStopBits,Integer32,read-only,,current,,For ISDN and modem cards, the stop bits.
.1.3.6.1.4.1.244.1.1.4.3.1.1.7,LANTRONIX-SLC-MIB::slcPCCardCfgParity,INTEGER,read-only,,current,none(1):odd(2):even(3),For ISDN and modem cards, the parity.
.1.3.6.1.4.1.244.1.1.4.3.1.1.8,LANTRONIX-SLC-MIB::slcPCCardCfgFlowControl,INTEGER,read-only,,current,none(1):xonxoff(2):rtscts(3),For ISDN and modem cards, the flow control.
.1.3.6.1.4.1.244.1.1.4.3.1.1.9,LANTRONIX-SLC-MIB::slcPCCardCfgModemState,INTEGER,read-only,,current,disabled(1):dialout(2):dialin(3):dialback(4):dialondemand(5):dialinAndDialondemand(6):dialinHostList(7):cbcpServer(8):cbcpClient(9),For ISDN and modem cards, indicates how the modem will be used.
.1.3.6.1.4.1.244.1.1.4.3.1.1.10,LANTRONIX-SLC-MIB::slcPCCardCfgModemMode,INTEGER,read-only,,current,ppp(1):text(2),For ISDN and modem cards, the mode: PPP (for Dial-in and  Dial-out) and text (for Dial-in and Dial-back).
.1.3.6.1.4.1.244.1.1.4.3.1.1.11,LANTRONIX-SLC-MIB::slcPCCardCfgLocalIP,IpAddress,read-only,,current,,For PPP connections, the local IP Address (all zeros if it  should be negotiated).
.1.3.6.1.4.1.244.1.1.4.3.1.1.12,LANTRONIX-SLC-MIB::slcPCCardCfgRemoteIP,IpAddress,read-only,,current,,For PPP connections, the remote IP Address (all zeros if it  should be negotiated).
.1.3.6.1.4.1.244.1.1.4.3.1.1.13,LANTRONIX-SLC-MIB::slcPCCardCfgAuth,INTEGER,read-only,,current,pap(1):chap(2),For PPP connections, the type of authentication to be used.
.1.3.6.1.4.1.244.1.1.4.3.1.1.14,LANTRONIX-SLC-MIB::slcPCCardCfgCHAPHost,OCTET,read-only,,current,,For PPP connections with CHAP authentication, the host (for  Unix) or user (for Windows) to use.
.1.3.6.1.4.1.244.1.1.4.3.1.1.15,LANTRONIX-SLC-MIB::slcPCCardCfgInitScript,OCTET,read-only,,current,,The initialization script for an external modem.
.1.3.6.1.4.1.244.1.1.4.3.1.1.16,LANTRONIX-SLC-MIB::slcPCCardCfgTimeout,Integer32,read-only,,current,,The timeout (in minutes) for text connections. A value  of 0 indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.4.3.1.1.17,LANTRONIX-SLC-MIB::slcPCCardCfgDialoutNum,OCTET,read-only,,current,,The phone number to use for dial-out connections.
.1.3.6.1.4.1.244.1.1.4.3.1.1.18,LANTRONIX-SLC-MIB::slcPCCardCfgDialoutLogin,OCTET,read-only,,current,,The login to use for dial-out connections.
.1.3.6.1.4.1.244.1.1.4.3.1.1.19,LANTRONIX-SLC-MIB::slcPCCardCfgDialbackMode,INTEGER,read-only,,current,usernumber(1):fixed(2),For dial-back connections, defines the phone number to call:  a number associated with the authenticated user, or a fixed  number associated with the Device Port.
.1.3.6.1.4.1.244.1.1.4.3.1.1.20,LANTRONIX-SLC-MIB::slcPCCardCfgDialbackNum,OCTET,read-only,,current,,The phone number to use for dial-back connections.
.1.3.6.1.4.1.244.1.1.4.3.1.1.21,LANTRONIX-SLC-MIB::slcPCCardCfgNATState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, use NAT (Network Address Translation) to allow  dial-in and dial-back users to access the network connected to Eth1 and Eth2.
.1.3.6.1.4.1.244.1.1.4.3.1.1.22,LANTRONIX-SLC-MIB::slcPCCardCfgStorageFS,INTEGER,read-only,,current,notmounted(1):ext2(2):fat(3),For storage cards, the type of filesystem on the card.
.1.3.6.1.4.1.244.1.1.4.3.1.1.23,LANTRONIX-SLC-MIB::slcPCCardCfgISDNChannel,Integer32,read-only,,current,,The channel on the ISDN card to use, either 1 or 2.
.1.3.6.1.4.1.244.1.1.4.3.1.1.24,LANTRONIX-SLC-MIB::slcPCCardCfgISDNChannelNum,OCTET,read-only,,current,,The phone number associated with the selected ISDN channel.
.1.3.6.1.4.1.244.1.1.4.3.1.1.25,LANTRONIX-SLC-MIB::slcPCCardCfgTelnetState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, Telnet connections to the modem/ISDN PC Card  are allowed.
.1.3.6.1.4.1.244.1.1.4.3.1.1.26,LANTRONIX-SLC-MIB::slcPCCardCfgTelnetPort,Integer32,read-only,,current,,TCP Port number for Telnet connections directly to the  modem/ISDN PC Card.
.1.3.6.1.4.1.244.1.1.4.3.1.1.27,LANTRONIX-SLC-MIB::slcPCCardCfgTelnetAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the user is required to authenticate to access  the modem/ISDN PC Card with Telnet.
.1.3.6.1.4.1.244.1.1.4.3.1.1.28,LANTRONIX-SLC-MIB::slcPCCardCfgSSHState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, SSH connections to the modem/ISDN PC Card  are allowed.
.1.3.6.1.4.1.244.1.1.4.3.1.1.29,LANTRONIX-SLC-MIB::slcPCCardCfgSSHPort,Integer32,read-only,,current,,TCP Port number for SSH connections directly to the  modem/ISDN PC Card.
.1.3.6.1.4.1.244.1.1.4.3.1.1.30,LANTRONIX-SLC-MIB::slcPCCardCfgSSHAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the user is required to authenticate to access  the modem/ISDN PC Card with SSH.
.1.3.6.1.4.1.244.1.1.4.3.1.1.31,LANTRONIX-SLC-MIB::slcPCCardCfgTCPState,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, TCP connections to the modem/ISDN PC Card  are allowed.
.1.3.6.1.4.1.244.1.1.4.3.1.1.32,LANTRONIX-SLC-MIB::slcPCCardCfgTCPPort,Integer32,read-only,,current,,TCP Port number for TCP connections directly to the  modem/ISDN PC Card.
.1.3.6.1.4.1.244.1.1.4.3.1.1.33,LANTRONIX-SLC-MIB::slcPCCardCfgTCPAuth,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the user is required to authenticate to access  the modem/ISDN PC Card with TCP.
.1.3.6.1.4.1.244.1.1.4.3.1.1.34,LANTRONIX-SLC-MIB::slcPCCardCfgGSMPIN,OCTET,read-only,,current,,The PIN associated with the GSM/GPRS PC Card modem.
.1.3.6.1.4.1.244.1.1.4.3.1.1.35,LANTRONIX-SLC-MIB::slcPCCardCfgGSMNetworkName,OCTET,read-only,,obsolete,,The Network Name associated with the GSM/GPRS PC Card modem.
.1.3.6.1.4.1.244.1.1.4.3.1.1.36,LANTRONIX-SLC-MIB::slcPCCardCfgGSMPPPCompression,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, PPP compression is enabled for GSM/GPRS PC Card  modem connections.
.1.3.6.1.4.1.244.1.1.4.3.1.1.37,LANTRONIX-SLC-MIB::slcPCCardCfgGSMAutoAcquireDNS,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, DNS servers will be acquired vi GSM/GPRS PC Card  modem PPP connections.
.1.3.6.1.4.1.244.1.1.4.3.1.1.38,LANTRONIX-SLC-MIB::slcPCCardCfgGSMDialoutMode,INTEGER,read-only,,current,gprs(1):gsm(2),The mode to be used for GSM/GPRS PC Card modems configured  for dialout.
.1.3.6.1.4.1.244.1.1.4.3.1.1.39,LANTRONIX-SLC-MIB::slcPCCardCfgGSMContextID,OCTET,read-only,,current,,The Context Id string used for GSM/GPRS PC Card modems  configured for GPRS dialout mode.
.1.3.6.1.4.1.244.1.1.4.3.1.1.40,LANTRONIX-SLC-MIB::slcPCCardCfgGSMBearerService,OCTET,read-only,,current,,The Bearer Service Type string used for GSM/GPRS PC Card  modems configured for GSM dialin/dialout mode.
.1.3.6.1.4.1.244.1.1.4.3.1.1.41,LANTRONIX-SLC-MIB::slcPCCardCfgIdleTimeout,Integer32,read-only,,current,,The timeout (in seconds) for dial-in and dial-on-demand PPP  connections. If no traffic is received for the PPP connection  in the time defined by the idle timeout, the PPP connection  will be terminated. A value of 0 indicates that timeouts are  disabled.
.1.3.6.1.4.1.244.1.1.4.3.1.1.42,LANTRONIX-SLC-MIB::slcPCCardCfgRestartDelay,Integer32,read-only,,current,,The delay (in seconds) to wait before restarting dial-out or  dial-on-demand PPP connections.
.1.3.6.1.4.1.244.1.1.4.3.1.1.43,LANTRONIX-SLC-MIB::slcPCCardCfgCallerIdLogging,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, caller id logging is enabled for a modem dial-in  connection.
.1.3.6.1.4.1.244.1.1.4.3.1.1.44,LANTRONIX-SLC-MIB::slcPCCardCfgCallerIdATCmd,OCTET,read-only,,current,,The modem AT command required to initiate caller id logging  by the modem.
.1.3.6.1.4.1.244.1.1.4.3.1.1.45,LANTRONIX-SLC-MIB::slcPCCardCfgDODAuth,INTEGER,read-only,,current,pap(1):chap(2),For PPP connections that are configured for both Dial-in and  Dial-on-Demand, the type of authentication to be used for  Dial-on-Demand.
.1.3.6.1.4.1.244.1.1.4.3.1.1.46,LANTRONIX-SLC-MIB::slcPCCardCfgDODCHAPHost,OCTET,read-only,,current,,For PPP connections that are configured for both Dial-in and  Dial-on-Demand, with CHAP authentication for Dial-on-Demand,  the host (for Unix) or user (for Windows) to use.
.1.3.6.1.4.1.244.1.1.4.3.1.1.47,LANTRONIX-SLC-MIB::slcPCCardCfgHostList,OCTET,read-only,,current,,When slcPCCardCfgModemState is set to dialinHostList, the  name of the Host List used for Dial-in.
.1.3.6.1.4.1.244.1.1.4.3.1.1.48,LANTRONIX-SLC-MIB::slcPCCardCfgCBCPClientType,INTEGER,read-only,,current,adminDefined(1):userDefined(2),When slcPCCardCfgModemState is set to cbcpClient, the  preferred type of dialback number to use for CBCP negotiation.
.1.3.6.1.4.1.244.1.1.4.3.1.1.49,LANTRONIX-SLC-MIB::slcPCCardCfgCBCPServerAllowNoCallback,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled and slcPCCardCfgModemState is set to cbcpServer,  the SLC will allow the PPP peer to select the No Callback  option during CBCP negotiation.
.1.3.6.1.4.1.244.1.1.4.3.1.1.50,LANTRONIX-SLC-MIB::slcPCCardCfgDialbackDelay,Integer32,read-only,,current,,When slcPCCardCfgModemState is set to dialback, cbcpServer  or cbcpClient, specifies the delay between the dial-in and  dial-out portion of the dialing sequence.
.1.3.6.1.4.1.244.1.1.4.4,LANTRONIX-SLC-MIB::slcDevPowerSupply,,,,,,
.1.3.6.1.4.1.244.1.1.4.4.1,LANTRONIX-SLC-MIB::slcDevPowerSupplyType,INTEGER,read-only,,current,acOnePowerSupply(1):acTwoPowerSupplies(2):dcTwoPowerSupplies(3),The type of power supply for the SLC.
.1.3.6.1.4.1.244.1.1.4.4.2,LANTRONIX-SLC-MIB::slcDevPowerSupplyA,INTEGER,read-only,,current,up(1):down(2),The status of Power Supply A.
.1.3.6.1.4.1.244.1.1.4.4.3,LANTRONIX-SLC-MIB::slcDevPowerSupplyB,INTEGER,read-only,,current,up(1):down(2):notInstalled(3),The status of Power Supply B.
.1.3.6.1.4.1.244.1.1.5,LANTRONIX-SLC-MIB::slcConnections,,,,,,
.1.3.6.1.4.1.244.1.1.5.1,LANTRONIX-SLC-MIB::slcConnNumber,Integer32,read-only,,current,,The number of entries in the Connections table.
.1.3.6.1.4.1.244.1.1.5.2,LANTRONIX-SLC-MIB::slcConnTable,,not-accessible,,current,,Table of connection entries. The number of entries is given  by the value of slcConnNumber.
.1.3.6.1.4.1.244.1.1.5.2.1,LANTRONIX-SLC-MIB::slcConnEntry,,not-accessible,slcConnIndex,current,,An entry containing a connection.
.1.3.6.1.4.1.244.1.1.5.2.1.1,LANTRONIX-SLC-MIB::slcConnIndex,INTEGER,read-only,,current,,Reference index for each connection.
.1.3.6.1.4.1.244.1.1.5.2.1.2,LANTRONIX-SLC-MIB::slcConnEndPt1,OCTET,read-only,,current,,A description of one of the end points of the connection.
.1.3.6.1.4.1.244.1.1.5.2.1.3,LANTRONIX-SLC-MIB::slcConnEndPt2,OCTET,read-only,,current,,A description of one of the end points of the connection.
.1.3.6.1.4.1.244.1.1.5.2.1.4,LANTRONIX-SLC-MIB::slcConnFlow,INTEGER,read-only,,current,bidirectional(1):endpt1toendpt2(2):endpt2toendpt1(3),The direction that data is flowing in the connection.
.1.3.6.1.4.1.244.1.1.5.2.1.5,LANTRONIX-SLC-MIB::slcConnUser,OCTET,read-only,,current,,The user that initiated the connection.
.1.3.6.1.4.1.244.1.1.5.2.1.6,LANTRONIX-SLC-MIB::slcConnDuration,Integer32,read-only,,current,,The duration, in seconds, that the connection has existed.
.1.3.6.1.4.1.244.1.1.5.2.1.7,LANTRONIX-SLC-MIB::slcConnDurationStr,OCTET,read-only,,current,,The duration, formatted in hours:minutes:seconds, that the  connection has existed.
.1.3.6.1.4.1.244.1.1.5.2.1.8,LANTRONIX-SLC-MIB::slcConnIdle,Integer32,read-only,,current,,The amount of time that the connection has been idle,  in seconds.
.1.3.6.1.4.1.244.1.1.5.2.1.9,LANTRONIX-SLC-MIB::slcConnIdleStr,OCTET,read-only,,current,,The amount of time that the connection has been idle, formatted in hours:minutes:seconds.
.1.3.6.1.4.1.244.1.1.5.2.1.10,LANTRONIX-SLC-MIB::slcConnSourceIP,IpAddress,read-only,,current,,For network (Telnet and SSH) connections into the SLC, the  source IP Address.
.1.3.6.1.4.1.244.1.1.6,LANTRONIX-SLC-MIB::slcSystem,,,,,,
.1.3.6.1.4.1.244.1.1.6.1,LANTRONIX-SLC-MIB::slcSystemModel,OCTET,read-only,,current,,The model of the SLC: SLC8, SLC16, SLC32, SLC48.
.1.3.6.1.4.1.244.1.1.6.2,LANTRONIX-SLC-MIB::slcSystemSerialNo,OCTET,read-only,,current,,The serial number of the SLC.
.1.3.6.1.4.1.244.1.1.6.3,LANTRONIX-SLC-MIB::slcSystemFWRev,OCTET,read-only,,current,,The firmware version of the SLC.
.1.3.6.1.4.1.244.1.1.6.4,LANTRONIX-SLC-MIB::slcSystemLoadVia,INTEGER,read-only,,current,ftp(1):tftp(2):sftp(3):slm(4):https(5):nfs(6):pccard(7),The method used for firmware updates.
.1.3.6.1.4.1.244.1.1.6.5,LANTRONIX-SLC-MIB::slcSystemFTPServer,IpAddress,read-only,,current,,The IP Address of the FTP/TFTP server used for firmware  updates, and for saving and restoring configurations.
.1.3.6.1.4.1.244.1.1.6.6,LANTRONIX-SLC-MIB::slcSystemFTPPath,OCTET,read-only,,current,,The path on the FTP server used for firmware updates, and  for saving and restoring configurations.
.1.3.6.1.4.1.244.1.1.6.7,LANTRONIX-SLC-MIB::slcSystemKeypadLock,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the LCD keypad is locked for editing  configuration. The keys can only be used to view settings.
.1.3.6.1.4.1.244.1.1.6.8,LANTRONIX-SLC-MIB::slcSystemTimeZone,OCTET,read-only,,current,,The time zone of the SLC.
.1.3.6.1.4.1.244.1.1.6.9,LANTRONIX-SLC-MIB::slcSystemWelcomeBanner,OCTET,read-only,,current,,The banner displayed before the login prompt.
.1.3.6.1.4.1.244.1.1.6.10,LANTRONIX-SLC-MIB::slcSystemLoginBanner,OCTET,read-only,,current,,The banner displayed after successful login.
.1.3.6.1.4.1.244.1.1.6.11,LANTRONIX-SLC-MIB::slcSystemLogoutBanner,OCTET,read-only,,current,,The banner displayed after logout.
.1.3.6.1.4.1.244.1.1.6.12,LANTRONIX-SLC-MIB::slcSystemWebTimeout,Integer32,read-only,,current,,The timeout (in minutes) for web sessions. A value of 0  indicates that timeouts are disabled.
.1.3.6.1.4.1.244.1.1.6.13,LANTRONIX-SLC-MIB::slcSystemWebGadget,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, iGoogle Gadget web content is enabled.
.1.3.6.1.4.1.244.1.1.6.14,LANTRONIX-SLC-MIB::slcSystemAction,INTEGER,read-write,,current,noAction(1):rebootSLC(2):shutdownSLC(3),Performs an action on the SLC. A read of this object always  returns the value noAction(1). Setting this object to  rebootSLC(2) will terminate all connections and reboot the  SLC. Setting this object to shutdownSLC(3) will terminate  all connections and shutdown the SLC so it can be powered off.
.1.3.6.1.4.1.244.1.1.6.15,LANTRONIX-SLC-MIB::slcSystemSSHPreAuthBanner,OCTET,read-only,,current,,The banner displayed prior to SSH authentication.
.1.3.6.1.4.1.244.1.1.6.16,LANTRONIX-SLC-MIB::slcSystemSiteRackRow,Integer32,read-only,,current,,The identifier of the row of racks in a data center  containing the SLC.
.1.3.6.1.4.1.244.1.1.6.17,LANTRONIX-SLC-MIB::slcSystemSiteRackCluster,Integer32,read-only,,current,,The identifier of the group of racks in a given row  (slcSystemSiteRackRow) containing the SLC.
.1.3.6.1.4.1.244.1.1.6.18,LANTRONIX-SLC-MIB::slcSystemSiteRack,Integer32,read-only,,current,,The identifier of the rack in a given rack group (slcSystemSiteRackCluster) containing the SLC.
.1.3.6.1.4.1.244.1.1.6.19,LANTRONIX-SLC-MIB::slcSystemLCDScreens,OCTET,read-only,,current,,A string describing the enabled LCD screens, in the order they  are displayed. Each screen is separated by a comma. The  possible screens are Current Time, Network, Console, Release,  Date/Time, Device Ports, Location and User Strings.
.1.3.6.1.4.1.244.1.1.6.20,LANTRONIX-SLC-MIB::slcSystemLCDUserStrLine1,OCTET,read-only,,current,,For the LCD screen User Strings, this is the first line  displayed on the LCD.
.1.3.6.1.4.1.244.1.1.6.21,LANTRONIX-SLC-MIB::slcSystemLCDUserStrLine2,OCTET,read-only,,current,,For the LCD screen User Strings, this is the second line  displayed on the LCD.
.1.3.6.1.4.1.244.1.1.6.22,LANTRONIX-SLC-MIB::slcSystemLCDScrolling,INTEGER,read-only,,current,disabled(1):enabled(2),If enabled, the LCD automatically scrolls through the  enabled screens.
.1.3.6.1.4.1.244.1.1.6.23,LANTRONIX-SLC-MIB::slcSystemLCDScrollDelay,Integer32,read-only,,current,,If LCD scrolling is enabled (slcSystemLCDScrolling), the  delay in seconds between displaying screens.
.1.3.6.1.4.1.244.1.1.6.24,LANTRONIX-SLC-MIB::slcSystemLCDIdleDelay,Integer32,read-only,,current,,If LCD scrolling is enabled (slcSystemLCDScrolling), the  number of seconds after keypad input before auto-scrolling  restarts.
.1.3.6.1.4.1.244.1.1.6.25,LANTRONIX-SLC-MIB::slcSystemInternalTemp,Integer32,read-only,,current,,The internal temperature of the SLC, given in Celsius.  A value of 9999 is returned if an error is encountered  reading the temperature.
.1.3.6.1.4.1.244.1.1.6.26,LANTRONIX-SLC-MIB::slcSystemWebProtocol,INTEGER,read-only,,current,tlsv1SSLv3(1):tlsv1SSLv3SSLv2(2),The protocol used by the web server.
.1.3.6.1.4.1.244.1.1.6.27,LANTRONIX-SLC-MIB::slcSystemWebCipher,INTEGER,read-only,,current,highMedium(1):highMediumLow(2),The strength of the cipher used by the web server. A cipher  with high strength uses 256, 168 or 128 bits; a cipher with  medium strength uses 128 bits; a cipher with low strength  uses 64 or 56 bits.
.1.3.6.1.4.1.244.1.1.7,LANTRONIX-SLC-MIB::slcEventObjects,,,,,,
.1.3.6.1.4.1.244.1.1.7.1,LANTRONIX-SLC-MIB::slcPowerSupplyId,INTEGER,read-only,,current,powerSupplyA(1):powerSupplyB(2),The identifier of the power supply in a slcEventPowerSupply  trap.
.1.3.6.1.4.1.244.1.1.7.2,LANTRONIX-SLC-MIB::slcPowerSupplyAction,INTEGER,read-only,,current,powerSupplyFailed(1):powerSupplyRestored(2),The action that occurred for a power supply in a  slcEventPowerSupply trap.
.1.3.6.1.4.1.244.1.1.7.3,LANTRONIX-SLC-MIB::slcDevPortNumBytes,Integer32,read-only,,current,,The number of bytes received on a Device Port to trigger a  slcEventDevicePortData or slcEventDevicePortSLMData trap.
.1.3.6.1.4.1.244.1.1.7.4,LANTRONIX-SLC-MIB::slcDevPortData,OCTET,read-only,,current,,The character data received on a Device Port to trigger a  slcEventDevicePortData trap.
.1.3.6.1.4.1.244.1.1.7.5,LANTRONIX-SLC-MIB::slcDevPortStartByte,Integer32,read-only,,current,,The starting byte within the logging buffer of data received  on a Device Port, which triggered a slcEventDevicePortSLMData  trap.
.1.3.6.1.4.1.244.1.1.7.6,LANTRONIX-SLC-MIB::slcDevPortTimeFrame,Integer32,read-only,,current,,The time frame, in seconds, after which a  slcEventDevicePortSLMData trap is sent to the SLM to trigger  retrieval of Device Port data.
.1.3.6.1.4.1.244.1.1.7.7,LANTRONIX-SLC-MIB::slcDevPortDeviceErrorStatus,INTEGER,read-only,,current,lowPower(1):damageOrTamper(2),The status returned when an error occurs in a device connected  to a Device Port.
.1.3.6.1.4.1.244.1.1.7.8,LANTRONIX-SLC-MIB::slcHostname,OCTET,read-only,,current,,The hostname of the SLC sending the trap.
.1.3.6.1.4.1.244.1.1.7.9,LANTRONIX-SLC-MIB::slcPCCardSlot,INTEGER,read-only,,current,upperSlot(1):lowerSlot(2),The PC Card slot indicated for the trap.
.1.3.6.1.4.1.244.1.1.7.10,LANTRONIX-SLC-MIB::slcPCCardAction,INTEGER,read-only,,current,cardInserted(1):cardRemoved(2),The action that occurred on a PC Card slot.
.1.3.6.1.4.1.244.1.1.7.11,LANTRONIX-SLC-MIB::slcPCCardType,INTEGER,read-only,,current,none(1):storage(2):modem(3):isdn(4):wireless(5):gsmmodem(6),The type of card inserted in a PC Card slot.
.1.3.6.1.4.1.244.1.8,LANTRONIX-MIB::slk,,,,,,
.1.3.6.1.4.1.244.1.9,LANTRONIX-MIB::slp,,,,,,
.1.3.6.1.4.1.244.1.10,LANTRONIX-MIB::slm,,,,,,
.1.3.6.1.4.1.244.1.11,LANTRONIX-MIB::sls,,,,,,
.1.3.6.1.4.1.244.1.12,LANTRONIX-MIB::slb,,,,,,
.1.3.6.1.4.1.244.1.13,LANTRONIX-MIB::evo,,,,,,
.1.3.6.1.4.1.244.10,LANTRONIX-MIB::ltxlna,,,,,,
.1.3.6.1.4.1.244.11,LANTRONIX-MIB::ltxlrp,,,,,,
.1.3.6.1.4.1.244.12,LANTRONIX-MIB::ltxlsw,,,,,,
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
