.1.3,RFC1155-SMI::org,,,,,,
.1.3.6,RFC1155-SMI::dod,,,,,,
.1.3.6.1,RFC1155-SMI::internet,,,,,,
.1.3.6.1.1,RFC1155-SMI::directory,,,,,,
.1.3.6.1.2,RFC1155-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.1.8,SNMPv2-MIB::sysORLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.
.1.3.6.1.2.1.1.9,SNMPv2-MIB::sysORTable,,not-accessible,,current,,The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.
.1.3.6.1.2.1.1.9.1,SNMPv2-MIB::sysOREntry,,not-accessible,sysORIndex,current,,An entry (conceptual row) in the sysORTable.
.1.3.6.1.2.1.1.9.1.1,SNMPv2-MIB::sysORIndex,INTEGER,not-accessible,,current,,The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.
.1.3.6.1.2.1.1.9.1.2,SNMPv2-MIB::sysORID,OBJECT,read-only,,current,,An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder.
.1.3.6.1.2.1.1.9.1.3,SNMPv2-MIB::sysORDescr,OCTET,read-only,,current,,A textual description of the capabilities identified by the corresponding instance of sysORID.
.1.3.6.1.2.1.1.9.1.4,SNMPv2-MIB::sysORUpTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time this conceptual row was last instantiated.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.11.31,SNMPv2-MIB::snmpSilentDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.
.1.3.6.1.2.1.11.32,SNMPv2-MIB::snmpProxyDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.31,IF-MIB::ifMIB,,,,,,The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
.1.3.6.1.2.1.31.1,IF-MIB::ifMIBObjects,,,,,,
.1.3.6.1.2.1.31.1.1,IF-MIB::ifXTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
.1.3.6.1.2.1.31.1.1.1,IF-MIB::ifXEntry,,not-accessible,,current,,An entry containing additional management information applicable to a particular interface.
.1.3.6.1.2.1.31.1.1.1.1,IF-MIB::ifName,OCTET,read-only,,current,,The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
.1.3.6.1.2.1.31.1.1.1.2,IF-MIB::ifInMulticastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.3,IF-MIB::ifInBroadcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.4,IF-MIB::ifOutMulticastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.5,IF-MIB::ifOutBroadcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.6,IF-MIB::ifHCInOctets,Counter64,read-only,,current,,The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.7,IF-MIB::ifHCInUcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.8,IF-MIB::ifHCInMulticastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.9,IF-MIB::ifHCInBroadcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.10,IF-MIB::ifHCOutOctets,Counter64,read-only,,current,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.11,IF-MIB::ifHCOutUcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.12,IF-MIB::ifHCOutMulticastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.13,IF-MIB::ifHCOutBroadcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.14,IF-MIB::ifLinkUpDownTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.2.1.31.1.1.1.15,IF-MIB::ifHighSpeed,Gauge32,read-only,,current,,An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.2.1.31.1.1.1.16,IF-MIB::ifPromiscuousMode,INTEGER,read-write,,current,true(1):false(2),This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface.
.1.3.6.1.2.1.31.1.1.1.17,IF-MIB::ifConnectorPresent,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.
.1.3.6.1.2.1.31.1.1.1.18,IF-MIB::ifAlias,OCTET,read-write,,current,,This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
.1.3.6.1.2.1.31.1.1.1.19,IF-MIB::ifCounterDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.2,IF-MIB::ifStackTable,,not-accessible,,current,,The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'on top of' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs over the sub-layer with ifIndex value y, then this table contains: ifStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.0.x=active ifStackStatus.x.0=active 
.1.3.6.1.2.1.31.1.2.1,IF-MIB::ifStackEntry,,not-accessible,ifStackHigherLayer:ifStackLowerLayer,current,,Information on a particular relationship between two sub- layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
.1.3.6.1.2.1.31.1.2.1.1,IF-MIB::ifStackHigherLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corresponding instance of ifStackLowerLayer. If there is no higher sub-layer (below the internetwork layer), then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.2,IF-MIB::ifStackLowerLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the lower sub-layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of ifStackHigherLayer. If there is no lower sub-layer, then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.3,IF-MIB::ifStackStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write-access for any type of interface.
.1.3.6.1.2.1.31.1.3,IF-MIB::ifTestTable,,not-accessible,,deprecated,,This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tests for an interface are defined in the media-specific MIB for that interface. After invoking a test, the object ifTestResult can be read to determine the outcome. If an agent can not perform the test, ifTestResult is set to so indicate. The object ifTestCode can be used to provide further test- specific or interface-specific (or even enterprise-specific) information concerning the outcome of the test. Only one test can be in progress on each interface at any one time. If one test is in progress when another test is invoked, the second test is rejected. Some agents may reject a test when a prior test is active on another interface. Before starting a test, a manager-station must first obtain 'ownership' of the entry in the ifTestTable for the interface to be tested. This is accomplished with the ifTestId and ifTestStatus objects as follows: try_again: get (ifTestId, ifTestStatus) while (ifTestStatus != notInUse) /* * Loop while a test is running or some other * manager is configuring a test. */ short delay get (ifTestId, ifTestStatus) } /* * Is not being used right now -- let's compete * to see who gets it. */ lock_value = ifTestId if ( set(ifTestId = lock_value, ifTestStatus = inUse, ifTestOwner = 'my-IP-address') == FAILURE) /* * Another manager got the ifTestEntry -- go * try again */ goto try_again; /* * I have the lock */ set up any test parameters. /* * This starts the test */ set(ifTestType = test_to_run); wait for test completion by polling ifTestResult when test completes, agent sets ifTestResult agent also sets ifTestStatus = 'notInUse' retrieve any additional test results, and ifTestId if (ifTestId == lock_value+1) results are valid A manager station first retrieves the value of the appropriate ifTestId and ifTestStatus objects, periodically repeating the retrieval if necessary, until the value of ifTestStatus is 'notInUse'. The manager station then tries to set the same ifTestId object to the value it just retrieved, the same ifTestStatus object to 'inUse', and the corresponding ifTestOwner object to a value indicating itself. If the set operation succeeds then the manager has obtained ownership of the ifTestEntry, and the value of the ifTestId object is incremented by the agent (per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the ifTestEntry. Once ownership is obtained, any test parameters can be setup, and then the test is initiated by setting ifTestType. On completion of the test, the agent sets ifTestStatus to 'notInUse'. Once this occurs, the manager can retrieve the results. In the (rare) event that the invocation of tests by two network managers were to overlap, then there would be a possibility that the first test's results might be overwritten by the second test's results prior to the first results being read. This unlikely circumstance ca
.1.3.6.1.2.1.31.1.3.1,IF-MIB::ifTestEntry,,not-accessible,,deprecated,,An entry containing objects for invoking tests on an interface.
.1.3.6.1.2.1.31.1.3.1.1,IF-MIB::ifTestId,INTEGER,read-write,,deprecated,,This object identifies the current invocation of the interface's test.
.1.3.6.1.2.1.31.1.3.1.2,IF-MIB::ifTestStatus,INTEGER,read-write,,deprecated,notInUse(1):inUse(2),This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
.1.3.6.1.2.1.31.1.3.1.3,IF-MIB::ifTestType,OBJECT,read-write,,deprecated,,A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full-duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
.1.3.6.1.2.1.31.1.3.1.4,IF-MIB::ifTestResult,INTEGER,read-only,,deprecated,none(1):success(2):inProgress(3):notSupported(4):unAbleToRun(5):aborted(6):failed(7),This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
.1.3.6.1.2.1.31.1.3.1.5,IF-MIB::ifTestCode,OBJECT,read-only,,deprecated,,This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 2579. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
.1.3.6.1.2.1.31.1.3.1.6,IF-MIB::ifTestOwner,OCTET,read-write,,deprecated,,The entity which currently has the 'ownership' required to invoke a test on this interface.
.1.3.6.1.2.1.31.1.4,IF-MIB::ifRcvAddressTable,,not-accessible,,current,,This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, except as follows: - for an interface operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode. - for 802.5 functional addresses, only one entry is required, for the address which has the functional address bit ANDed with the bit mask of all functional addresses for which the interface will accept frames. A system is normally able to use any unicast address which corresponds to an entry in this table as a source address.
.1.3.6.1.2.1.31.1.4.1,IF-MIB::ifRcvAddressEntry,,not-accessible,ifIndex:ifRcvAddressAddress,current,,A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex.
.1.3.6.1.2.1.31.1.4.1.1,IF-MIB::ifRcvAddressAddress,OCTET,not-accessible,,current,,An address for which the system will accept packets/frames on this entry's interface.
.1.3.6.1.2.1.31.1.4.1.2,IF-MIB::ifRcvAddressStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete rows in the ifRcvAddressTable.
.1.3.6.1.2.1.31.1.4.1.3,IF-MIB::ifRcvAddressType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3),This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart.
.1.3.6.1.2.1.31.1.5,IF-MIB::ifTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.6,IF-MIB::ifStackLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last change of the (whole) interface stack. A change of the interface stack is defined to be any creation, deletion, or change in value of any instance of ifStackStatus. If the interface stack has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.2,IF-MIB::ifConformance,,,,,,
.1.3.6.1.2.1.31.2.1,IF-MIB::ifGroups,,,,,,
.1.3.6.1.2.1.31.2.1.1,IF-MIB::ifGeneralGroup,,,,,,A collection of objects deprecated in favour of ifGeneralInformationGroup.
.1.3.6.1.2.1.31.2.1.2,IF-MIB::ifFixedLengthGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) character-oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.3,IF-MIB::ifHCFixedLengthGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) character- oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.4,IF-MIB::ifPacketGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.5,IF-MIB::ifHCPacketGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second but less than or equal to 650,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.6,IF-MIB::ifVHCPacketGroup,,,,,,A collection of objects providing information specific to higher speed (greater than 650,000,000 bits/second) packet- oriented network interfaces.
.1.3.6.1.2.1.31.2.1.7,IF-MIB::ifRcvAddressGroup,,,,,,A collection of objects providing information on the multiple addresses which an interface receives.
.1.3.6.1.2.1.31.2.1.8,IF-MIB::ifTestGroup,,,,,,A collection of objects providing the ability to invoke tests on an interface.
.1.3.6.1.2.1.31.2.1.9,IF-MIB::ifStackGroup,,,,,,The previous collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.10,IF-MIB::ifGeneralInformationGroup,,,,,,A collection of objects providing information applicable to all network interfaces.
.1.3.6.1.2.1.31.2.1.11,IF-MIB::ifStackGroup2,,,,,,A collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.12,IF-MIB::ifOldObjectsGroup,,,,,,The collection of objects deprecated from the original MIB- II interfaces group.
.1.3.6.1.2.1.31.2.1.13,IF-MIB::ifCounterDiscontinuityGroup,,,,,,A collection of objects providing information specific to interface counter discontinuities.
.1.3.6.1.2.1.31.2.1.14,IF-MIB::linkUpDownNotificationsGroup,,,,,,The notifications which indicate specific changes in the value of ifOperStatus.
.1.3.6.1.2.1.31.2.2,IF-MIB::ifCompliances,,,,,,
.1.3.6.1.2.1.31.2.2.1,IF-MIB::ifCompliance,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.2,IF-MIB::ifCompliance2,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.3,IF-MIB::ifCompliance3,,,,,,The compliance statement for SNMP entities which have network interfaces.
.1.3.6.1.3,RFC1155-SMI::experimental,,,,,,
.1.3.6.1.4,RFC1155-SMI::private,,,,,,
.1.3.6.1.4.1,RFC1155-SMI::enterprises,,,,,,
.1.3.6.1.4.1.2925,CYCLADES-MIB::cyclades,,,,,,
.1.3.6.1.4.1.2925.4,CYCLADES-ACS-MIB::cyACSMgmt,,,,,,This file defines the Cyclades MIB extensions to 
.1.3.6.1.4.1.2925.4.1,CYCLADES-ACS-SYS-MIB::cyACSSys,,,,,,This module defines the ACS/TS System Information
.1.3.6.1.4.1.2925.4.1.1,CYCLADES-ACS-SYS-MIB::cyACSpname,OCTET,read-only,,current,,The product's name - ACSxx (xx - the number of the serial ports )
.1.3.6.1.4.1.2925.4.1.2,CYCLADES-ACS-SYS-MIB::cyACSversion,OCTET,read-only,,current,,The firmware's version
.1.3.6.1.4.1.2925.4.1.3,CYCLADES-ACS-SYS-MIB::cyACSPower,,,,,,It gives information about Power Supply
.1.3.6.1.4.1.2925.4.1.3.1,CYCLADES-ACS-SYS-MIB::cyACSPwNum,Integer32,read-only,,current,,Number of the power supplies
.1.3.6.1.4.1.2925.4.1.3.2,CYCLADES-ACS-SYS-MIB::cyACSPw1,INTEGER,read-only,,current,noinstalled(0):powerON(1):powerOFF(2),State of the first power supply
.1.3.6.1.4.1.2925.4.1.3.3,CYCLADES-ACS-SYS-MIB::cyACSPw2,INTEGER,read-only,,current,noinstalled(0):powerON(1):powerOFF(2),State of the second power supply
.1.3.6.1.4.1.2925.4.1.4,CYCLADES-ACS-SYS-MIB::cyACSPcmcia,,,,,,PCMCIA card information
.1.3.6.1.4.1.2925.4.1.4.1,CYCLADES-ACS-SYS-MIB::cyACSNPcmcia,Integer32,read-only,,current,,Number of the cards PCMCIA available
.1.3.6.1.4.1.2925.4.1.4.2,CYCLADES-ACS-SYS-MIB::cyCardIdentTable,,not-accessible,,current,,Card identification
.1.3.6.1.4.1.2925.4.1.4.2.1,CYCLADES-ACS-SYS-MIB::cyCardIdentEntry,,not-accessible,cyCardIdentIndex,current,,One particular association between PCMCIA socket and card identification
.1.3.6.1.4.1.2925.4.1.4.2.1.1,CYCLADES-ACS-SYS-MIB::cyCardIdentIndex,Integer32,read-only,,current,,number to identifier the socket Card
.1.3.6.1.4.1.2925.4.1.4.2.1.2,CYCLADES-ACS-SYS-MIB::cyCardIdentProd,OCTET,read-only,,current,,Product identification strings
.1.3.6.1.4.1.2925.4.1.4.2.1.3,CYCLADES-ACS-SYS-MIB::cyCardIdentMan,OCTET,read-only,,current,,Manufacturer ID codes
.1.3.6.1.4.1.2925.4.1.4.2.1.4,CYCLADES-ACS-SYS-MIB::cyCardIdentFunc,OCTET,read-only,,current,,Function ID code
.1.3.6.1.4.1.2925.4.1.4.2.1.5,CYCLADES-ACS-SYS-MIB::cyCardIdentPCI,OCTET,read-only,,current,,PCI ID
.1.3.6.1.4.1.2925.4.1.4.3,CYCLADES-ACS-SYS-MIB::cyCardConfTable,,not-accessible,,current,,This table has the socket configuration 
.1.3.6.1.4.1.2925.4.1.4.3.1,CYCLADES-ACS-SYS-MIB::cyCardConfEntry,,not-accessible,cyCardConfIndex,current,,One particular association between PCMCIA socket and its configuration
.1.3.6.1.4.1.2925.4.1.4.3.1.1,CYCLADES-ACS-SYS-MIB::cyCardConfIndex,Integer32,read-only,,current,,number to identifier the socket PCMCIA
.1.3.6.1.4.1.2925.4.1.4.3.1.2,CYCLADES-ACS-SYS-MIB::cyCardConfPower,OCTET,read-only,,current,,Power Settings
.1.3.6.1.4.1.2925.4.1.4.3.1.3,CYCLADES-ACS-SYS-MIB::cyCardConfType,OCTET,read-only,,current,,Interface Type
.1.3.6.1.4.1.2925.4.1.4.3.1.4,CYCLADES-ACS-SYS-MIB::cyCardConfInter,OCTET,read-only,,current,,Interrupt number
.1.3.6.1.4.1.2925.4.1.4.3.1.5,CYCLADES-ACS-SYS-MIB::cyCardConfFunc,OCTET,read-only,,current,,function
.1.3.6.1.4.1.2925.4.1.4.3.1.6,CYCLADES-ACS-SYS-MIB::cyCardConfCardv,OCTET,read-only,,current,,Card values
.1.3.6.1.4.1.2925.4.1.4.3.1.7,CYCLADES-ACS-SYS-MIB::cyCardConfPort1,OCTET,read-only,,current,,I/O Port 1
.1.3.6.1.4.1.2925.4.1.4.3.1.8,CYCLADES-ACS-SYS-MIB::cyCardConfPort2,OCTET,read-only,,current,,I/O Port 2
.1.3.6.1.4.1.2925.4.1.4.4,CYCLADES-ACS-SYS-MIB::cyCardStatusTable,,not-accessible,,current,,This table has the current socket status flags 
.1.3.6.1.4.1.2925.4.1.4.4.1,CYCLADES-ACS-SYS-MIB::cyCardStatusEntry,,not-accessible,cyCardStatusIndex,current,,One particular association between PCMCIA socket and its status
.1.3.6.1.4.1.2925.4.1.4.4.1.1,CYCLADES-ACS-SYS-MIB::cyCardStatusIndex,Integer32,read-only,,current,,number to identifier the socket PCMCIA
.1.3.6.1.4.1.2925.4.1.4.4.1.2,CYCLADES-ACS-SYS-MIB::cyCardStatusCard,OCTET,read-only,,current,,Current Card State
.1.3.6.1.4.1.2925.4.1.4.4.1.3,CYCLADES-ACS-SYS-MIB::cyCardStatusFunc,OCTET,read-only,,current,,Current Function
.1.3.6.1.4.1.2925.4.1.5,CYCLADES-ACS-SYS-MIB::cyACSFlashSize,Integer32,read-only,,current,,Total amount of flash memory in Mbytes
.1.3.6.1.4.1.2925.4.1.6,CYCLADES-ACS-SYS-MIB::cyACSRAMSize,Integer32,read-only,,current,,Total amount of RAM in Mbytes
.1.3.6.1.4.1.2925.4.1.7,CYCLADES-ACS-SYS-MIB::cyACSCPUfreq,Integer32,read-only,,current,,CPU clock in MHz
.1.3.6.1.4.1.2925.4.1.8,CYCLADES-ACS-SYS-MIB::cyACSDevId,OCTET,read-only,,current,,The product's identifier
.1.3.6.1.4.1.2925.4.2,CYCLADES-ACS-CONF-MIB::cyACSConf,,,,,,This module defines objects for the ACS/TS configuration
.1.3.6.1.4.1.2925.4.2.1,CYCLADES-ACS-CONF-MIB::cyHostName,OCTET,read-write,,current,,The Host Name 
.1.3.6.1.4.1.2925.4.2.2,CYCLADES-ACS-CONF-MIB::cyConsoleBanner,OCTET,read-write,,current,,The console banner 
.1.3.6.1.4.1.2925.4.2.3,CYCLADES-ACS-CONF-MIB::cyMotd,OCTET,read-write,,current,,The motd message 
.1.3.6.1.4.1.2925.4.2.4,CYCLADES-ACS-CONF-MIB::cyEthItf,,,,,,The configuration of the Ethernet Interface
.1.3.6.1.4.1.2925.4.2.4.1,CYCLADES-ACS-CONF-MIB::cyEthDhcpc,INTEGER,read-write,,current,inactive(0):active(1):restore(2),The ACS can request all of its ethernet parameters 
.1.3.6.1.4.1.2925.4.2.4.2,CYCLADES-ACS-CONF-MIB::cyEthIPaddr,IpAddress,read-write,,current,,This is the IP address of the Ethernet Interface
.1.3.6.1.4.1.2925.4.2.4.3,CYCLADES-ACS-CONF-MIB::cyEthIPmask,IpAddress,read-write,,current,,The mask fot the Ethernet network
.1.3.6.1.4.1.2925.4.2.4.4,CYCLADES-ACS-CONF-MIB::cyEthMTU,Integer32,read-write,,current,,The Maximum Transmission Unit size, wich determines 
.1.3.6.1.4.1.2925.4.2.4.5,CYCLADES-ACS-CONF-MIB::cyEthIPaddr2,IpAddress,read-write,,current,,The Ethernet secondary IP address
.1.3.6.1.4.1.2925.4.2.4.6,CYCLADES-ACS-CONF-MIB::cyEthIPmask2,IpAddress,read-write,,current,,The Ethernet secondary IP mask
.1.3.6.1.4.1.2925.4.2.5,CYCLADES-ACS-CONF-MIB::cyNameService,,,,,,The Name Service configuration
.1.3.6.1.4.1.2925.4.2.5.1,CYCLADES-ACS-CONF-MIB::cyResolverOrder,OCTET,read-write,,current,,It specifies how host lookups are to be performed.
.1.3.6.1.4.1.2925.4.2.5.2,CYCLADES-ACS-CONF-MIB::cyMultipleIP,OCTET,read-write,,current,,Valid values are ON or OFF. If set to ON, the resolve 
.1.3.6.1.4.1.2925.4.2.5.3,CYCLADES-ACS-CONF-MIB::cyDNSserv,,,,,,The DNS server configuration
.1.3.6.1.4.1.2925.4.2.5.3.1,CYCLADES-ACS-CONF-MIB::cyDNSpriserv,IpAddress,read-write,,current,,Internet Address (in dot notation) of primary name 
.1.3.6.1.4.1.2925.4.2.5.3.2,CYCLADES-ACS-CONF-MIB::cyDNSsecserv,IpAddress,read-write,,current,,Internet Address (in dot notation) of secondary name 
.1.3.6.1.4.1.2925.4.2.5.3.3,CYCLADES-ACS-CONF-MIB::cyDNSdomain,OCTET,read-write,,current,,Local domain name .
.1.3.6.1.4.1.2925.4.2.6,CYCLADES-ACS-CONF-MIB::cySerialPortConf,,,,,,The PortSlave configuration - pslave.conf file. 
.1.3.6.1.4.1.2925.4.2.6.1,CYCLADES-ACS-CONF-MIB::cySerialGlobal,,,,,,These parameters have the prefix conf. in 
.1.3.6.1.4.1.2925.4.2.6.1.1,CYCLADES-ACS-CONF-MIB::cySerialInclude,OCTET,read-write,,current,,File used in centralized management.
.1.3.6.1.4.1.2925.4.2.6.1.2,CYCLADES-ACS-CONF-MIB::cySerialNFS,OCTET,read-write,,current,,Remote Network File System where data buffering will be 
.1.3.6.1.4.1.2925.4.2.6.1.3,CYCLADES-ACS-CONF-MIB::cySerialLockDir,OCTET,read-write,,current,,The lock directory for the ACS.
.1.3.6.1.4.1.2925.4.2.6.1.4,CYCLADES-ACS-CONF-MIB::cySerialRlogin,OCTET,read-write,,current,,Location of the rlogin binary that accepts the -i flag.
.1.3.6.1.4.1.2925.4.2.6.1.5,CYCLADES-ACS-CONF-MIB::cySerialPppd,OCTET,read-write,,current,,Location of the pppd binary.
.1.3.6.1.4.1.2925.4.2.6.1.6,CYCLADES-ACS-CONF-MIB::cySerialTelnet,OCTET,read-write,,current,,Location of the telnet application
.1.3.6.1.4.1.2925.4.2.6.1.7,CYCLADES-ACS-CONF-MIB::cySerialSsh,OCTET,read-write,,current,,Location of the ssh application
.1.3.6.1.4.1.2925.4.2.6.1.8,CYCLADES-ACS-CONF-MIB::cySerialLocalLogins,INTEGER,read-write,,current,off(0):on(1),This parameter is only necessary when authentication is 
.1.3.6.1.4.1.2925.4.2.6.1.9,CYCLADES-ACS-CONF-MIB::cySerialFacility,Integer32,read-write,,current,,This value (0-7) is the Local facility sent to the syslog daemon.
.1.3.6.1.4.1.2925.4.2.6.1.10,CYCLADES-ACS-CONF-MIB::cySerialDBFacility,Integer32,read-write,,current,,This value (0-7) is the Local facility sent to the syslog 
.1.3.6.1.4.1.2925.4.2.6.1.11,CYCLADES-ACS-CONF-MIB::cySerialGroupTable,,not-accessible,,current,,This associates group name and its users
.1.3.6.1.4.1.2925.4.2.6.1.11.1,CYCLADES-ACS-CONF-MIB::cygroupEntry,,not-accessible,cyGroupIndex,current,,One particular association between group name and its users
.1.3.6.1.4.1.2925.4.2.6.1.11.1.1,CYCLADES-ACS-CONF-MIB::cyGroupIndex,Integer32,read-only,,current,,number to identifier the group
.1.3.6.1.4.1.2925.4.2.6.1.11.1.2,CYCLADES-ACS-CONF-MIB::cyGroupName,OCTET,read-write,,current,,The Group Name 
.1.3.6.1.4.1.2925.4.2.6.1.11.1.3,CYCLADES-ACS-CONF-MIB::cyGroupUsers,OCTET,read-write,,current,,The users names 
.1.3.6.1.4.1.2925.4.2.6.2,CYCLADES-ACS-CONF-MIB::cySerialSpec,,,,,,These parameters have the prefix all. or sxx. in the pslave.conf file
.1.3.6.1.4.1.2925.4.2.6.2.1,CYCLADES-ACS-CONF-MIB::cySerialPortTable,,not-accessible,,current,,This is the specific configuration to serial port
.1.3.6.1.4.1.2925.4.2.6.2.1.1,CYCLADES-ACS-CONF-MIB::cysportEntry,,not-accessible,cySPortNumber,current,,One particular serial port configuration
.1.3.6.1.4.1.2925.4.2.6.2.1.1.1,CYCLADES-ACS-CONF-MIB::cySPortNumber,Integer32,read-only,,current,,number to identifier the serial port. Value 0 is ALL.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.2,CYCLADES-ACS-CONF-MIB::cySPortTty,OCTET,read-write,,current,,The device name for the serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.3,CYCLADES-ACS-CONF-MIB::cySPortName,OCTET,read-write,,current,,Alias name given to the server connected to the serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.4,CYCLADES-ACS-CONF-MIB::cySPortSpeed,INTEGER,read-write,,current,s50bps(50):s75bps(75):s110bps(110):s134bps(134):s150bps(150):s200bps(200):s300bps(300):s600bps(600):s1200bps(1200):s1800bps(1800):s2400bps(2400):s4800bps(4800):s9600bps(9600):s14400bps(14400):s19200bps(19200):s28800bps(28800):s38400bps(38400):s57600bps(57600):s115200bps(115200):s230400bps(230400):s460800bps(460800),The speed for serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.5,CYCLADES-ACS-CONF-MIB::cySPortDataSize,Integer32,read-write,,current,,The data size for serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.6,CYCLADES-ACS-CONF-MIB::cySPortStopBits,Integer32,read-write,,current,,The number of stop bits for serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.7,CYCLADES-ACS-CONF-MIB::cySPortParity,OCTET,read-write,,current,,The parity for serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.8,CYCLADES-ACS-CONF-MIB::cySPortFlowCtrl,OCTET,read-write,,current,,The flow control for serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.9,CYCLADES-ACS-CONF-MIB::cySPortDTRdelay,Integer32,read-write,,current,,This specifies how long (in miliseconds) a DTR signal
.1.3.6.1.4.1.2925.4.2.6.2.1.1.10,CYCLADES-ACS-CONF-MIB::cySPortDCDCtrl,INTEGER,read-write,,current,notctrl(0):control(1),DCD signal controls the connection request.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.11,CYCLADES-ACS-CONF-MIB::cySPortLogUtmp,INTEGER,read-write,,current,inactive(0):active(1),ACS update the login records in /var/run/utmp file.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.12,CYCLADES-ACS-CONF-MIB::cySPortLogWtmp,INTEGER,read-write,,current,inactive(0):active(1),ACS update the login records in /var/run/wtmp file.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.13,CYCLADES-ACS-CONF-MIB::cySPortLogform,OCTET,read-write,,current,,This is the format to write login record.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.14,CYCLADES-ACS-CONF-MIB::cySPortAuthtype,OCTET,read-write,,current,,Authentication type : .
.1.3.6.1.4.1.2925.4.2.6.2.1.1.15,CYCLADES-ACS-CONF-MIB::cySPortAuthSrv1,IpAddress,read-write,,current,,IP address of the primary authentication server.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.16,CYCLADES-ACS-CONF-MIB::cySPortAccSrv1,IpAddress,read-write,,current,,IP address of the primary accounting server.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.17,CYCLADES-ACS-CONF-MIB::cySPortAuthTmo,Integer32,read-write,,current,,This is the timeout (in seconds) for authentication 
.1.3.6.1.4.1.2925.4.2.6.2.1.1.18,CYCLADES-ACS-CONF-MIB::cySPortAuthRetr,Integer32,read-write,,current,,This defines the number of times each server is tried 
.1.3.6.1.4.1.2925.4.2.6.2.1.1.19,CYCLADES-ACS-CONF-MIB::cySPortAuthSrv2,IpAddress,read-write,,current,,IP address of the secondary authentication server.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.20,CYCLADES-ACS-CONF-MIB::cySPortAccSrv2,IpAddress,read-write,,current,,IP address of the secondary accounting server.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.21,CYCLADES-ACS-CONF-MIB::cySPortAuthSecret,OCTET,read-write,,current,,This is the shared secret with authentciation servers.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.22,CYCLADES-ACS-CONF-MIB::cySPortAuthRadP,INTEGER,read-write,,current,inactive(0):active(1),To accept Radius' user without password.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.23,CYCLADES-ACS-CONF-MIB::cySPortAuthAcc,OCTET,read-write,,current,,access restrition on Users.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.24,CYCLADES-ACS-CONF-MIB::cySPortProtocol,OCTET,read-write,,current,,Defines the port serial's protocol.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.25,CYCLADES-ACS-CONF-MIB::cySPortRemoteIP,OCTET,read-write,,current,,This is the default IP address of the serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.26,CYCLADES-ACS-CONF-MIB::cySPortSocketPort,OCTET,read-write,,current,,This defines an alternative labeling system for the serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.27,CYCLADES-ACS-CONF-MIB::cySPortRemHost,IpAddress,read-write,,current,,The IP address of the host to which the serial port will connect.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.28,CYCLADES-ACS-CONF-MIB::cySPortBanner,OCTET,read-write,,current,,This defines the banner.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.29,CYCLADES-ACS-CONF-MIB::cySPortPrompt,OCTET,read-write,,current,,This defines the login prompt to the serial port.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.30,CYCLADES-ACS-CONF-MIB::cySPortTermType,OCTET,read-write,,current,,This defines the terminal type.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.31,CYCLADES-ACS-CONF-MIB::cySPortAutomUsr,OCTET,read-write,,current,,This defines the automatic user.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.32,CYCLADES-ACS-CONF-MIB::cySPortNetMask,IpAddress,read-write,,current,,The network mask used in dial in connection.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.33,CYCLADES-ACS-CONF-MIB::cySPortPppMtu,Integer32,read-write,,current,,The PPP MTU - dial in connection.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.34,CYCLADES-ACS-CONF-MIB::cySPortPppMru,Integer32,read-write,,current,,The PPP MRU - dial in connection.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.35,CYCLADES-ACS-CONF-MIB::cySPortPppOptions,OCTET,read-write,,current,,The PPP options when ACS autodetects the PPP session .
.1.3.6.1.4.1.2925.4.2.6.2.1.1.36,CYCLADES-ACS-CONF-MIB::cySPortPppFoption,OCTET,read-write,,current,,The PPP forced options when the user has already been authenticated.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.37,CYCLADES-ACS-CONF-MIB::cySPortModemChat,OCTET,read-write,,current,,The initchat send to modem connected.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.38,CYCLADES-ACS-CONF-MIB::cySPortSttyCmd,OCTET,read-write,,current,,the tty settings after socket connection is established.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.39,CYCLADES-ACS-CONF-MIB::cySPortSockTx,Integer32,read-write,,current,,Defines the delay (in miliseconds) before transmission to
.1.3.6.1.4.1.2925.4.2.6.2.1.1.40,CYCLADES-ACS-CONF-MIB::cySPortSockPoll,Integer32,read-write,,current,,Keep-alive timer (miliseconds) to the TCP connection .
.1.3.6.1.4.1.2925.4.2.6.2.1.1.41,CYCLADES-ACS-CONF-MIB::cySPortSockIdle,Integer32,read-write,,current,,The idle timeout in seconds .
.1.3.6.1.4.1.2925.4.2.6.2.1.1.42,CYCLADES-ACS-CONF-MIB::cySPortDBsize,Integer32,read-write,,current,,Maximum size of the data buffering file.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.43,CYCLADES-ACS-CONF-MIB::cySPortDBtime,INTEGER,read-write,,current,inactive(0):active(1),Timestamp in data buffering.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.44,CYCLADES-ACS-CONF-MIB::cySPortDBmode,OCTET,read-write,,current,,Data buffering mode : circ or line
.1.3.6.1.4.1.2925.4.2.6.2.1.1.45,CYCLADES-ACS-CONF-MIB::cySPortDBsyslog,Integer32,read-write,,current,,size of the data buffering send to syslog.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.46,CYCLADES-ACS-CONF-MIB::cySPortDBmenu,INTEGER,read-write,,current,displayMenu(0):inactive(1):displayDB(2):displayParc(3),Menu of the data buffering.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.47,CYCLADES-ACS-CONF-MIB::cySPortDBalarm,INTEGER,read-write,,current,inactive(0):active(1),Generating Alarms.
.1.3.6.1.4.1.2925.4.2.6.2.1.1.48,CYCLADES-ACS-CONF-MIB::cySPortSSHbreak,OCTET,read-write,,current,,Break sequence - ssh session
.1.3.6.1.4.1.2925.4.2.6.2.1.1.49,CYCLADES-ACS-CONF-MIB::cySPortSniffSess,OCTET,read-write,,current,,Sniff session type
.1.3.6.1.4.1.2925.4.2.6.2.1.1.50,CYCLADES-ACS-CONF-MIB::cySPortSniffAdm,OCTET,read-write,,current,,List of admin users to sniff session
.1.3.6.1.4.1.2925.4.2.6.2.1.1.51,CYCLADES-ACS-CONF-MIB::cySPortSniffEsc,OCTET,read-write,,current,,Escape sequence used in sniff session
.1.3.6.1.4.1.2925.4.2.6.2.1.1.52,CYCLADES-ACS-CONF-MIB::cySPortSniffMsess,OCTET,read-write,,current,,Multiple sniff sessions
.1.3.6.1.4.1.2925.4.2.6.2.1.1.53,CYCLADES-ACS-CONF-MIB::cySPortTelnetMode,INTEGER,read-write,,current,text(0):binary(1),Mode negotiated by client telnet with the server
.1.3.6.1.4.1.2925.4.2.6.2.1.1.54,CYCLADES-ACS-CONF-MIB::cySPortSysBufSess,INTEGER,read-write,,current,yes(0):no(1),Syslog Buffering at all times
.1.3.6.1.4.1.2925.4.2.6.2.1.1.55,CYCLADES-ACS-CONF-MIB::cySPortLFSuppress,INTEGER,read-write,,current,inactive(0):active(1),LF suppression in socket_server session
.1.3.6.1.4.1.2925.4.2.6.2.1.1.56,CYCLADES-ACS-CONF-MIB::cySPortAutoInput,OCTET,read-write,,current,,This string is used to auto answer. It's the input string
.1.3.6.1.4.1.2925.4.2.6.2.1.1.57,CYCLADES-ACS-CONF-MIB::cySPortAutoOutput,OCTET,read-write,,current,,This string is used to auto answer. It's the output string
.1.3.6.1.4.1.2925.4.2.6.2.1.1.58,CYCLADES-ACS-CONF-MIB::cySPortPmType,OCTET,read-write,,current,,IPDU type, when the port protocol is configured as IPDU
.1.3.6.1.4.1.2925.4.2.6.2.1.1.59,CYCLADES-ACS-CONF-MIB::cySPortPmUsers,OCTET,read-write,,current,,List of users which can access the IPDU and their respective outlets
.1.3.6.1.4.1.2925.4.2.6.2.1.1.60,CYCLADES-ACS-CONF-MIB::cySPortPmOutlet,OCTET,read-write,,current,,List of <IPDU port>.<outlet> pairs, where the server is connected
.1.3.6.1.4.1.2925.4.2.6.2.1.1.61,CYCLADES-ACS-CONF-MIB::cySPortPmKey,OCTET,read-write,,current,,Hotkey to grant access to the Power Management from a Telnet/SSH session
.1.3.6.1.4.1.2925.4.2.6.2.1.1.62,CYCLADES-ACS-CONF-MIB::cySPortPmNOutlets,Integer32,read-write,,current,,Number of outlets of the IPDU
.1.3.6.1.4.1.2925.4.2.6.2.1.1.63,CYCLADES-ACS-CONF-MIB::cySPortBreakInterval,Integer32,read-write,,current,,The break interval in miliseconds.
.1.3.6.1.4.1.2925.4.3,CYCLADES-ACS-INFO-MIB::cyACSInfo,,,,,,This module defines objects of the ACS/TS information
.1.3.6.1.4.1.2925.4.3.1,CYCLADES-ACS-INFO-MIB::cyInfoSerialTable,,not-accessible,,current,,This is the information of the specific serial port
.1.3.6.1.4.1.2925.4.3.1.1,CYCLADES-ACS-INFO-MIB::cyisPortEntry,,not-accessible,cyISPortNumber,current,,One particular serial port 
.1.3.6.1.4.1.2925.4.3.1.1.1,CYCLADES-ACS-INFO-MIB::cyISPortNumber,Integer32,read-only,,current,,number to identifier the serial port.
.1.3.6.1.4.1.2925.4.3.1.1.2,CYCLADES-ACS-INFO-MIB::cyISPortTty,OCTET,read-only,,current,,The device name for the serial port.
.1.3.6.1.4.1.2925.4.3.1.1.3,CYCLADES-ACS-INFO-MIB::cyISPortName,OCTET,read-only,,current,,Alias name given to the server connected to the serial port.
.1.3.6.1.4.1.2925.4.3.1.1.4,CYCLADES-ACS-INFO-MIB::cyISPortSpeed,Integer32,read-only,,current,,The speed for serial port.
.1.3.6.1.4.1.2925.4.3.1.1.5,CYCLADES-ACS-INFO-MIB::cyISPortTxBytes,Counter32,read-only,,current,,The number of transmited bytes by the serial port.
.1.3.6.1.4.1.2925.4.3.1.1.6,CYCLADES-ACS-INFO-MIB::cyISPortRXBytes,Counter32,read-only,,current,,The number of received bytes by the serial port.
.1.3.6.1.4.1.2925.4.3.1.1.7,CYCLADES-ACS-INFO-MIB::cyISPortErrFrame,Counter32,read-only,,current,,The number of frame error.
.1.3.6.1.4.1.2925.4.3.1.1.8,CYCLADES-ACS-INFO-MIB::cyISPortErrParity,Counter32,read-only,,current,,The number of parity error.
.1.3.6.1.4.1.2925.4.3.1.1.9,CYCLADES-ACS-INFO-MIB::cyISPortErrBreaks,Counter32,read-only,,current,,The number of breaks error.
.1.3.6.1.4.1.2925.4.3.1.1.10,CYCLADES-ACS-INFO-MIB::cyISPortErrOverrun,Counter32,read-only,,current,,The number of overrun error.
.1.3.6.1.4.1.2925.4.3.1.1.11,CYCLADES-ACS-INFO-MIB::cyISPortSigDTR,INTEGER,read-only,,current,down(0):up(1),The state of DTR signal.
.1.3.6.1.4.1.2925.4.3.1.1.12,CYCLADES-ACS-INFO-MIB::cyISPortSigCD,INTEGER,read-only,,current,down(0):up(1),The state of DCD signal.
.1.3.6.1.4.1.2925.4.3.1.1.13,CYCLADES-ACS-INFO-MIB::cyISPortSigDSR,INTEGER,read-only,,current,down(0):up(1),The state of DSR signal.
.1.3.6.1.4.1.2925.4.3.1.1.14,CYCLADES-ACS-INFO-MIB::cyISPortSigRTS,INTEGER,read-only,,current,down(0):up(1),The state of RTS signal.
.1.3.6.1.4.1.2925.4.3.1.1.15,CYCLADES-ACS-INFO-MIB::cyISPortSigCTS,INTEGER,read-only,,current,down(0):up(1),The state of CTS signal.
.1.3.6.1.4.1.2925.4.3.1.1.16,CYCLADES-ACS-INFO-MIB::cyISPortSigRI,INTEGER,read-only,,current,down(0):up(1),The state of RI signal.
.1.3.6.1.4.1.2925.4.4,CYCLADES-ACS-ADM-MIB::cyACSAdm,,,,,,This module defines objects of the ACS/TS administration
.1.3.6.1.4.1.2925.4.4.1,CYCLADES-ACS-ADM-MIB::cyACSSave,INTEGER,read-write,,current,nosave(0):save(1),Exec saveconf command
.1.3.6.1.4.1.2925.4.4.2,CYCLADES-ACS-ADM-MIB::cyACSSerialHUP,INTEGER,read-write,,current,norestartportslave(0):restartportslave(1),Exec signal_ras hup command
.1.3.6.1.4.1.2925.4.5,CYCLADES-ACS-PM-MIB::cyPM,,,,,,This module defines objects of the Proxy for PM 
.1.3.6.1.4.1.2925.4.5.1,CYCLADES-ACS-PM-MIB::cyNumberOfPM,Integer32,read-only,,current,,The total number of PM's connected on the unit
.1.3.6.1.4.1.2925.4.5.2,CYCLADES-ACS-PM-MIB::cyPMTable,,not-accessible,,current,,Allows to read information about each connected PM
.1.3.6.1.4.1.2925.4.5.2.1,CYCLADES-ACS-PM-MIB::cyPMEntry,,not-accessible,cyPMSerialPortNumber,current,,Information about the connected PM
.1.3.6.1.4.1.2925.4.5.2.1.1,CYCLADES-ACS-PM-MIB::cyPMSerialPortNumber,Integer32,read-only,,current,,The number of the serial port when the PM is connected.
.1.3.6.1.4.1.2925.4.5.2.1.2,CYCLADES-ACS-PM-MIB::cyPMNumberOutlets,Integer32,read-only,,current,,Number of outlets.
.1.3.6.1.4.1.2925.4.5.2.1.3,CYCLADES-ACS-PM-MIB::cyPMNumberUnits,Integer32,read-only,,current,,Total number of PM unists that are accessed by this 
.1.3.6.1.4.1.2925.4.5.2.1.4,CYCLADES-ACS-PM-MIB::cyPMCurrent,OCTET,read-only,,current,,Current reading for the PM.
.1.3.6.1.4.1.2925.4.5.2.1.5,CYCLADES-ACS-PM-MIB::cyPMVersion,OCTET,read-only,,current,,The software version of the PM.
.1.3.6.1.4.1.2925.4.5.2.1.6,CYCLADES-ACS-PM-MIB::cyPMTemperature,OCTET,read-only,,current,,The PM temperature.
.1.3.6.1.4.1.2925.4.5.2.1.7,CYCLADES-ACS-PM-MIB::cyPMCommand,OCTET,read-write,,current,,A character string for the user to send commands to
.1.3.6.1.4.1.2925.4.5.3,CYCLADES-ACS-PM-MIB::cyPMUnitTable,,not-accessible,,current,,Allow operations on specific PM unit connected
.1.3.6.1.4.1.2925.4.5.3.1,CYCLADES-ACS-PM-MIB::cyPMUnitEntry,,not-accessible,cyPMSerialPortNumber:cyPMUnitNumber,current,,Allow operations on outlet
.1.3.6.1.4.1.2925.4.5.3.1.1,CYCLADES-ACS-PM-MIB::cyPMUnitNumber,Integer32,not-accessible,,current,,The number of the PM unit in the daisy-chained mode.
.1.3.6.1.4.1.2925.4.5.3.1.2,CYCLADES-ACS-PM-MIB::cyPMUnitVersion,OCTET,read-only,,current,,The software version of this PM unit.
.1.3.6.1.4.1.2925.4.5.3.1.3,CYCLADES-ACS-PM-MIB::cyPMUnitOutlets,Integer32,read-only,,current,,Number of outlets of this PM unit.
.1.3.6.1.4.1.2925.4.5.3.1.4,CYCLADES-ACS-PM-MIB::cyPMUnitFirstOutlet,Integer32,read-only,,current,,Number of the first outlet of this PM unit.
.1.3.6.1.4.1.2925.4.5.3.1.5,CYCLADES-ACS-PM-MIB::cyPMUnitCurrent,Integer32,read-only,,current,,Current of this PM unit in AMP. AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.2925.4.5.3.1.6,CYCLADES-ACS-PM-MIB::cyPMUnitMaxCurrent,Integer32,read-only,,current,,Maximum current of this PM unit in AMP. AMP * 10. You need to translate the readed value (Ex. : value is 5, the maximum current is 0.5 AMP.)
.1.3.6.1.4.1.2925.4.5.3.1.7,CYCLADES-ACS-PM-MIB::cyPMUnitTemperature,Integer32,read-only,,current,,Temperature of this PM unit in Celsius degrees. degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.2925.4.5.3.1.8,CYCLADES-ACS-PM-MIB::cyPMUnitMaxTemperature,Integer32,read-write,,current,,Maximum temperature value of this PM unit in Celsius  Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.2925.4.5.4,CYCLADES-ACS-PM-MIB::cyOutletTable,,not-accessible,,current,,Allow operations on outlet
.1.3.6.1.4.1.2925.4.5.4.1,CYCLADES-ACS-PM-MIB::cyOutletEntry,,not-accessible,cyPMSerialPortNumber:cyOutletNumber,current,,Allow operations on outlet
.1.3.6.1.4.1.2925.4.5.4.1.1,CYCLADES-ACS-PM-MIB::cyOutletNumber,Integer32,not-accessible,,current,,The outlet number on the PM. Zero is ALL outlets.
.1.3.6.1.4.1.2925.4.5.4.1.2,CYCLADES-ACS-PM-MIB::cyOutletName,OCTET,read-write,,current,,The name given to a particular outlet Maximum size is 8 characters.
.1.3.6.1.4.1.2925.4.5.4.1.3,CYCLADES-ACS-PM-MIB::cyOutletServer,OCTET,read-only,,current,,Alias of the Server connected to this outlet .
.1.3.6.1.4.1.2925.4.5.4.1.4,CYCLADES-ACS-PM-MIB::cyOutletPower,INTEGER,read-write,,current,off(0):on(1):cycle(2):unknow(3),Getting this object will return the power state of
.1.3.6.1.4.1.2925.4.5.4.1.5,CYCLADES-ACS-PM-MIB::cyOutletLock,INTEGER,read-write,,current,unlock(0):lock(1):unknow(2),Getting this object will return the lock state of
.1.3.6.1.4.1.2925.4.5.4.1.6,CYCLADES-ACS-PM-MIB::cyOutletPUInterval,Integer32,read-write,,current,,The power unit interval of this outlet in seconds. seconds * 10. You need to translate the readed value (Ex. : value is 5, the interval is 0.5 seconds.)
.1.3.6.1.4.1.2925.8,CYCLADES-ACS5K-MIB::cyACS5KMgmt,,,,,,This module defines the ACS5000 Enterprise MIB
.1.3.6.1.4.1.2925.8.1,CYCLADES-ACS5K-SYS-MIB::cyACS5KSys,,,,,,This module defines the ACS5000 System Information
.1.3.6.1.4.1.2925.8.1.1,CYCLADES-ACS5K-SYS-MIB::cyACS5Kpname,OCTET,read-only,,current,,The product's name - ACS50xx (xx - the number of the serial ports )
.1.3.6.1.4.1.2925.8.1.2,CYCLADES-ACS5K-SYS-MIB::cyACS5Kversion,OCTET,read-only,,current,,The firmware's version
.1.3.6.1.4.1.2925.8.1.3,CYCLADES-ACS5K-SYS-MIB::cyACS5KPower,,,,,,It gives information about Power Supply
.1.3.6.1.4.1.2925.8.1.3.1,CYCLADES-ACS5K-SYS-MIB::cyACS5KPwNum,Integer32,read-only,,current,,Number of the power supplies
.1.3.6.1.4.1.2925.8.1.3.2,CYCLADES-ACS5K-SYS-MIB::cyACS5KPw1,INTEGER,read-only,,current,noinstalled(0):powerON(1):powerOFF(2),State of the first power supply
.1.3.6.1.4.1.2925.8.1.3.3,CYCLADES-ACS5K-SYS-MIB::cyACS5KPw2,INTEGER,read-only,,current,noinstalled(0):powerON(1):powerOFF(2),State of the second power supply
.1.3.6.1.4.1.2925.8.1.4,CYCLADES-ACS5K-SYS-MIB::cyACS5KPcmcia,,,,,,PCMCIA card information
.1.3.6.1.4.1.2925.8.1.4.1,CYCLADES-ACS5K-SYS-MIB::cyACS5KNPcmcia,Integer32,read-only,,current,,Number of the cards PCMCIA available
.1.3.6.1.4.1.2925.8.1.5,CYCLADES-ACS5K-SYS-MIB::cyACS5KFlashSize,Integer32,read-only,,current,,Total amount of flash memory in Mbytes
.1.3.6.1.4.1.2925.8.1.6,CYCLADES-ACS5K-SYS-MIB::cyACS5KRAMSize,Integer32,read-only,,current,,Total amount of RAM in Mbytes
.1.3.6.1.4.1.2925.8.1.7,CYCLADES-ACS5K-SYS-MIB::cyACS5KCPUfreq,Integer32,read-only,,current,,CPU clock in MHz
.1.3.6.1.4.1.2925.8.1.8,CYCLADES-ACS5K-SYS-MIB::cyACS5KDevId,OCTET,read-only,,current,,The product's identifier
.1.3.6.1.4.1.2925.8.1.9,CYCLADES-ACS5K-SYS-MIB::cyACS5KSerialN,OCTET,read-only,,current,,The product's serial number
.1.3.6.1.4.1.2925.8.2,CYCLADES-ACS5K-CONF-MIB::cyACS5KConf,,,,,,Configuration of ACS5000 products
.1.3.6.1.4.1.2925.8.2.1,CYCLADES-ACS5K-CONF-MIB::cyHostName,OCTET,read-write,,current,,The Host Name 
.1.3.6.1.4.1.2925.8.2.2,CYCLADES-ACS5K-CONF-MIB::cyConsoleBanner,OCTET,read-write,,current,,The console banner 
.1.3.6.1.4.1.2925.8.2.3,CYCLADES-ACS5K-CONF-MIB::cyMotd,OCTET,read-write,,current,,The motd message 
.1.3.6.1.4.1.2925.8.2.4,CYCLADES-ACS5K-CONF-MIB::cyEthItf,,,,,,The configuration of the Ethernet Interface
.1.3.6.1.4.1.2925.8.2.4.1,CYCLADES-ACS5K-CONF-MIB::cyEthDhcpc,INTEGER,read-write,,current,inactive(0):active(1):restore(2),The ACS can request all of its ethernet parameters 
.1.3.6.1.4.1.2925.8.2.4.2,CYCLADES-ACS5K-CONF-MIB::cyEthIPaddr,IpAddress,read-write,,current,,This is the IP address of the Ethernet Interface
.1.3.6.1.4.1.2925.8.2.4.3,CYCLADES-ACS5K-CONF-MIB::cyEthIPmask,IpAddress,read-write,,current,,The mask fot the Ethernet network
.1.3.6.1.4.1.2925.8.2.4.4,CYCLADES-ACS5K-CONF-MIB::cyEthMTU,Integer32,read-write,,current,,The Maximum Transmission Unit size, wich determines 
.1.3.6.1.4.1.2925.8.2.4.5,CYCLADES-ACS5K-CONF-MIB::cyEthIPaddr2,IpAddress,read-write,,current,,The Ethernet secondary IP address
.1.3.6.1.4.1.2925.8.2.4.6,CYCLADES-ACS5K-CONF-MIB::cyEthIPmask2,IpAddress,read-write,,current,,The Ethernet secondary IP mask
.1.3.6.1.4.1.2925.8.2.4.7,CYCLADES-ACS5K-CONF-MIB::cyEnableIPv4,INTEGER,read-write,,current,no(0):yes(1),This parameter is used to enable or disable the configuration of IPv4 addresses
.1.3.6.1.4.1.2925.8.2.4.8,CYCLADES-ACS5K-CONF-MIB::cyEnableIPv6,INTEGER,read-write,,current,no(0):yes(1),This parameter is used to enable or disable the configuration of IPv6 addresses
.1.3.6.1.4.1.2925.8.2.4.9,CYCLADES-ACS5K-CONF-MIB::cyIPv6Method,INTEGER,read-write,,current,stateless-only(0):static(1):dhcp(2),IPv6 configuration method
.1.3.6.1.4.1.2925.8.2.4.10,CYCLADES-ACS5K-CONF-MIB::cyDHCPv6Opts,INTEGER,read-write,,current,none(0):dns(1):domain(2):dns-domain(3),DHCP options for IPv6
.1.3.6.1.4.1.2925.8.2.4.11,CYCLADES-ACS5K-CONF-MIB::cyEthIPaddr6,OCTET,read-write,,current,,This is the IPv6 address of the Ethernet Interface
.1.3.6.1.4.1.2925.8.2.4.12,CYCLADES-ACS5K-CONF-MIB::cyEthPrefix6,Integer32,read-write,,current,,IPv6 network prefix length of the Ethernet Interface
.1.3.6.1.4.1.2925.8.2.5,CYCLADES-ACS5K-CONF-MIB::cyNameService,,,,,,The Name Service configuration
.1.3.6.1.4.1.2925.8.2.5.1,CYCLADES-ACS5K-CONF-MIB::cyResolverOrder,OCTET,read-write,,current,,It specifies how host lookups are to be performed.
.1.3.6.1.4.1.2925.8.2.5.2,CYCLADES-ACS5K-CONF-MIB::cyMultipleIP,OCTET,read-write,,current,,Valid values are ON or OFF. If set to ON, the resolve 
.1.3.6.1.4.1.2925.8.2.5.3,CYCLADES-ACS5K-CONF-MIB::cyDNSserv,,,,,,The DNS server configuration
.1.3.6.1.4.1.2925.8.2.5.3.1,CYCLADES-ACS5K-CONF-MIB::cyDNSpriserv,OCTET,read-write,,current,,Internet Address (in dot notation) of primary name 
.1.3.6.1.4.1.2925.8.2.5.3.2,CYCLADES-ACS5K-CONF-MIB::cyDNSsecserv,OCTET,read-write,,current,,Internet Address (in dot notation) of secondary name 
.1.3.6.1.4.1.2925.8.2.5.3.3,CYCLADES-ACS5K-CONF-MIB::cyDNSdomain,OCTET,read-write,,current,,Local domain name .
.1.3.6.1.4.1.2925.8.2.6,CYCLADES-ACS5K-CONF-MIB::cySerialPortConf,,,,,,The PortSlave configuration - pslave.conf file. 
.1.3.6.1.4.1.2925.8.2.6.1,CYCLADES-ACS5K-CONF-MIB::cySerialGlobal,,,,,,These parameters have the prefix conf. in 
.1.3.6.1.4.1.2925.8.2.6.1.1,CYCLADES-ACS5K-CONF-MIB::cySerialInclude,OCTET,read-write,,current,,File used in centralized management.
.1.3.6.1.4.1.2925.8.2.6.1.2,CYCLADES-ACS5K-CONF-MIB::cySerialNFS,OCTET,read-write,,current,,Remote Network File System where data buffering will be 
.1.3.6.1.4.1.2925.8.2.6.1.3,CYCLADES-ACS5K-CONF-MIB::cySerialLockDir,OCTET,read-write,,current,,The lock directory for the ACS.
.1.3.6.1.4.1.2925.8.2.6.1.4,CYCLADES-ACS5K-CONF-MIB::cySerialRlogin,OCTET,read-write,,current,,Location of the rlogin binary that accepts the -i flag.
.1.3.6.1.4.1.2925.8.2.6.1.5,CYCLADES-ACS5K-CONF-MIB::cySerialPppd,OCTET,read-write,,current,,Location of the pppd binary.
.1.3.6.1.4.1.2925.8.2.6.1.6,CYCLADES-ACS5K-CONF-MIB::cySerialTelnet,OCTET,read-write,,current,,Location of the telnet application
.1.3.6.1.4.1.2925.8.2.6.1.7,CYCLADES-ACS5K-CONF-MIB::cySerialSsh,OCTET,read-write,,current,,Location of the ssh application
.1.3.6.1.4.1.2925.8.2.6.1.8,CYCLADES-ACS5K-CONF-MIB::cySerialLocalLogins,INTEGER,read-write,,current,off(0):on(1),This parameter is only necessary when authentication is 
.1.3.6.1.4.1.2925.8.2.6.1.9,CYCLADES-ACS5K-CONF-MIB::cySerialFacility,Integer32,read-write,,current,,This value (0-7) is the Local facility sent to the syslog daemon.
.1.3.6.1.4.1.2925.8.2.6.1.10,CYCLADES-ACS5K-CONF-MIB::cySerialDBFacility,Integer32,read-write,,current,,This value (0-7) is the Local facility sent to the syslog 
.1.3.6.1.4.1.2925.8.2.6.1.11,CYCLADES-ACS5K-CONF-MIB::cySerialGroupTable,,not-accessible,,current,,This associates group name and its users
.1.3.6.1.4.1.2925.8.2.6.1.11.1,CYCLADES-ACS5K-CONF-MIB::cygroupEntry,,not-accessible,cyGroupIndex,current,,One particular association between group name and its users
.1.3.6.1.4.1.2925.8.2.6.1.11.1.1,CYCLADES-ACS5K-CONF-MIB::cyGroupIndex,Integer32,read-only,,current,,number to identifier the group
.1.3.6.1.4.1.2925.8.2.6.1.11.1.2,CYCLADES-ACS5K-CONF-MIB::cyGroupName,OCTET,read-write,,current,,The Group Name 
.1.3.6.1.4.1.2925.8.2.6.1.11.1.3,CYCLADES-ACS5K-CONF-MIB::cyGroupUsers,OCTET,read-write,,current,,The users names 
.1.3.6.1.4.1.2925.8.2.6.2,CYCLADES-ACS5K-CONF-MIB::cySerialSpec,,,,,,These parameters have the prefix all. or sxx. in the pslave.conf file
.1.3.6.1.4.1.2925.8.2.6.2.1,CYCLADES-ACS5K-CONF-MIB::cySerialPortTable,,not-accessible,,current,,This is the specific configuration to serial port
.1.3.6.1.4.1.2925.8.2.6.2.1.1,CYCLADES-ACS5K-CONF-MIB::cysportEntry,,not-accessible,cySPortNumber,current,,One particular serial port configuration
.1.3.6.1.4.1.2925.8.2.6.2.1.1.1,CYCLADES-ACS5K-CONF-MIB::cySPortNumber,Integer32,read-only,,current,,number to identifier the serial port. Value 0 is ALL.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.2,CYCLADES-ACS5K-CONF-MIB::cySPortTty,OCTET,read-write,,current,,The device name for the serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.3,CYCLADES-ACS5K-CONF-MIB::cySPortName,OCTET,read-write,,current,,Alias name given to the server connected to the serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.4,CYCLADES-ACS5K-CONF-MIB::cySPortSpeed,INTEGER,read-write,,current,s50bps(50):s75bps(75):s110bps(110):s134bps(134):s150bps(150):s200bps(200):s300bps(300):s600bps(600):s1200bps(1200):s1800bps(1800):s2400bps(2400):s4800bps(4800):s9600bps(9600):s14400bps(14400):s19200bps(19200):s28800bps(28800):s38400bps(38400):s57600bps(57600):s115200bps(115200):s230400bps(230400):s460800bps(460800),The speed for serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.5,CYCLADES-ACS5K-CONF-MIB::cySPortDataSize,Integer32,read-write,,current,,The data size for serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.6,CYCLADES-ACS5K-CONF-MIB::cySPortStopBits,Integer32,read-write,,current,,The number of stop bits for serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.7,CYCLADES-ACS5K-CONF-MIB::cySPortParity,OCTET,read-write,,current,,The parity for serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.8,CYCLADES-ACS5K-CONF-MIB::cySPortFlowCtrl,OCTET,read-write,,current,,The flow control for serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.9,CYCLADES-ACS5K-CONF-MIB::cySPortDTRdelay,Integer32,read-write,,current,,This specifies how long (in miliseconds) a DTR signal
.1.3.6.1.4.1.2925.8.2.6.2.1.1.10,CYCLADES-ACS5K-CONF-MIB::cySPortDCDCtrl,INTEGER,read-write,,current,notctrl(0):control(1),DCD signal controls the connection request.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.11,CYCLADES-ACS5K-CONF-MIB::cySPortLogUtmp,INTEGER,read-write,,current,inactive(0):active(1),ACS update the login records in /var/run/utmp file.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.12,CYCLADES-ACS5K-CONF-MIB::cySPortLogWtmp,INTEGER,read-write,,current,inactive(0):active(1),ACS update the login records in /var/run/wtmp file.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.13,CYCLADES-ACS5K-CONF-MIB::cySPortLogform,OCTET,read-write,,current,,This is the format to write login record.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.14,CYCLADES-ACS5K-CONF-MIB::cySPortAuthtype,OCTET,read-write,,current,,Authentication type : .
.1.3.6.1.4.1.2925.8.2.6.2.1.1.15,CYCLADES-ACS5K-CONF-MIB::cySPortAuthSrv1,OCTET,read-write,,current,,IP address of the primary authentication server.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.16,CYCLADES-ACS5K-CONF-MIB::cySPortAccSrv1,OCTET,read-write,,current,,IP address of the primary accounting server.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.17,CYCLADES-ACS5K-CONF-MIB::cySPortAuthTmo,Integer32,read-write,,current,,This is the timeout (in seconds) for authentication 
.1.3.6.1.4.1.2925.8.2.6.2.1.1.18,CYCLADES-ACS5K-CONF-MIB::cySPortAuthRetr,Integer32,read-write,,current,,This defines the number of times each server is tried 
.1.3.6.1.4.1.2925.8.2.6.2.1.1.19,CYCLADES-ACS5K-CONF-MIB::cySPortAuthSrv2,OCTET,read-write,,current,,IP address of the secondary authentication server.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.20,CYCLADES-ACS5K-CONF-MIB::cySPortAccSrv2,OCTET,read-write,,current,,IP address of the secondary accounting server.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.21,CYCLADES-ACS5K-CONF-MIB::cySPortAuthSecret,OCTET,read-write,,current,,This is the shared secret with authentciation servers.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.22,CYCLADES-ACS5K-CONF-MIB::cySPortAuthRadP,INTEGER,read-write,,current,inactive(0):active(1),To accept Radius' user without password.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.23,CYCLADES-ACS5K-CONF-MIB::cySPortAuthAcc,OCTET,read-write,,current,,access restrition on Users.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.24,CYCLADES-ACS5K-CONF-MIB::cySPortProtocol,OCTET,read-write,,current,,Defines the port serial's protocol.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.25,CYCLADES-ACS5K-CONF-MIB::cySPortRemoteIP,OCTET,read-write,,current,,This is the default IP address of the serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.26,CYCLADES-ACS5K-CONF-MIB::cySPortSocketPort,OCTET,read-write,,current,,This defines an alternative labeling system for the serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.27,CYCLADES-ACS5K-CONF-MIB::cySPortRemHost,OCTET,read-write,,current,,The IP address of the host to which the serial port will connect.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.28,CYCLADES-ACS5K-CONF-MIB::cySPortBanner,OCTET,read-write,,current,,This defines the banner.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.29,CYCLADES-ACS5K-CONF-MIB::cySPortPrompt,OCTET,read-write,,current,,This defines the login prompt to the serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.30,CYCLADES-ACS5K-CONF-MIB::cySPortTermType,OCTET,read-write,,current,,This defines the terminal type.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.31,CYCLADES-ACS5K-CONF-MIB::cySPortAutomUsr,OCTET,read-write,,current,,This defines the automatic user.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.32,CYCLADES-ACS5K-CONF-MIB::cySPortNetMask,IpAddress,read-write,,current,,The network mask used in dial in connection.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.33,CYCLADES-ACS5K-CONF-MIB::cySPortPppMtu,Integer32,read-write,,current,,The PPP MTU - dial in connection.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.34,CYCLADES-ACS5K-CONF-MIB::cySPortPppMru,Integer32,read-write,,current,,The PPP MRU - dial in connection.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.35,CYCLADES-ACS5K-CONF-MIB::cySPortPppOptions,OCTET,read-write,,current,,The PPP options when ACS autodetects the PPP session .
.1.3.6.1.4.1.2925.8.2.6.2.1.1.36,CYCLADES-ACS5K-CONF-MIB::cySPortPppFoption,OCTET,read-write,,current,,The PPP forced options when the user has already been authenticated.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.37,CYCLADES-ACS5K-CONF-MIB::cySPortModemChat,OCTET,read-write,,current,,The initchat send to modem connected.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.38,CYCLADES-ACS5K-CONF-MIB::cySPortSttyCmd,OCTET,read-write,,current,,the tty settings after socket connection is established.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.39,CYCLADES-ACS5K-CONF-MIB::cySPortSockTx,Integer32,read-write,,current,,Defines the delay (in miliseconds) before transmission to
.1.3.6.1.4.1.2925.8.2.6.2.1.1.40,CYCLADES-ACS5K-CONF-MIB::cySPortSockPoll,Integer32,read-write,,current,,Keep-alive timer (miliseconds) to the TCP connection .
.1.3.6.1.4.1.2925.8.2.6.2.1.1.41,CYCLADES-ACS5K-CONF-MIB::cySPortSockIdle,Integer32,read-write,,current,,The idle timeout in seconds .
.1.3.6.1.4.1.2925.8.2.6.2.1.1.42,CYCLADES-ACS5K-CONF-MIB::cySPortDBsize,Integer32,read-write,,current,,Maximum size of the data buffering file.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.43,CYCLADES-ACS5K-CONF-MIB::cySPortDBtime,INTEGER,read-write,,current,inactive(0):active(1),Timestamp in data buffering.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.44,CYCLADES-ACS5K-CONF-MIB::cySPortDBmode,OCTET,read-write,,current,,Data buffering mode : circ or line
.1.3.6.1.4.1.2925.8.2.6.2.1.1.45,CYCLADES-ACS5K-CONF-MIB::cySPortDBsyslog,Integer32,read-write,,current,,size of the data buffering send to syslog.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.46,CYCLADES-ACS5K-CONF-MIB::cySPortDBmenu,INTEGER,read-write,,current,displayMenu(0):inactive(1):displayDB(2):displayParc(3),Menu of the data buffering.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.47,CYCLADES-ACS5K-CONF-MIB::cySPortDBalarm,INTEGER,read-write,,current,inactive(0):active(1),Generating Alarms.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.48,CYCLADES-ACS5K-CONF-MIB::cySPortSSHbreak,OCTET,read-write,,current,,Break sequence - ssh session
.1.3.6.1.4.1.2925.8.2.6.2.1.1.49,CYCLADES-ACS5K-CONF-MIB::cySPortSniffSess,OCTET,read-write,,current,,Sniff session type
.1.3.6.1.4.1.2925.8.2.6.2.1.1.50,CYCLADES-ACS5K-CONF-MIB::cySPortSniffAdm,OCTET,read-write,,current,,List of admin users to sniff session
.1.3.6.1.4.1.2925.8.2.6.2.1.1.51,CYCLADES-ACS5K-CONF-MIB::cySPortSniffEsc,OCTET,read-write,,current,,Escape sequence used in sniff session
.1.3.6.1.4.1.2925.8.2.6.2.1.1.52,CYCLADES-ACS5K-CONF-MIB::cySPortSniffMsess,OCTET,read-write,,current,,Multiple sniff sessions
.1.3.6.1.4.1.2925.8.2.6.2.1.1.53,CYCLADES-ACS5K-CONF-MIB::cySPortTelnetMode,INTEGER,read-write,,current,text(0):binary(1),Mode negotiated by client telnet with the server
.1.3.6.1.4.1.2925.8.2.6.2.1.1.54,CYCLADES-ACS5K-CONF-MIB::cySPortSysBufSess,INTEGER,read-write,,current,yes(0):no(1),Syslog Buffering at all times
.1.3.6.1.4.1.2925.8.2.6.2.1.1.55,CYCLADES-ACS5K-CONF-MIB::cySPortLFSuppress,INTEGER,read-write,,current,inactive(0):active(1),LF suppression in socket_server session
.1.3.6.1.4.1.2925.8.2.6.2.1.1.56,CYCLADES-ACS5K-CONF-MIB::cySPortAutoInput,OCTET,read-write,,current,,This string is used to auto answer. It's the input string
.1.3.6.1.4.1.2925.8.2.6.2.1.1.57,CYCLADES-ACS5K-CONF-MIB::cySPortAutoOutput,OCTET,read-write,,current,,This string is used to auto answer. It's the output string
.1.3.6.1.4.1.2925.8.2.6.2.1.1.58,CYCLADES-ACS5K-CONF-MIB::cySPortPmType,OCTET,read-write,,current,,IPDU type, when the port protocol is configured as IPDU
.1.3.6.1.4.1.2925.8.2.6.2.1.1.59,CYCLADES-ACS5K-CONF-MIB::cySPortPmUsers,OCTET,read-write,,current,,List of users which can access the IPDU and their respective outlets
.1.3.6.1.4.1.2925.8.2.6.2.1.1.60,CYCLADES-ACS5K-CONF-MIB::cySPortPmOutlet,OCTET,read-write,,current,,List of <IPDU port>.<outlet> pairs, where the server is connected
.1.3.6.1.4.1.2925.8.2.6.2.1.1.61,CYCLADES-ACS5K-CONF-MIB::cySPortPmKey,OCTET,read-write,,current,,Hotkey to grant access to the Power Management from a Telnet/SSH session
.1.3.6.1.4.1.2925.8.2.6.2.1.1.62,CYCLADES-ACS5K-CONF-MIB::cySPortPmNOutlets,Integer32,read-write,,current,,Number of outlets of the IPDU
.1.3.6.1.4.1.2925.8.2.6.2.1.1.63,CYCLADES-ACS5K-CONF-MIB::cySPortBreakInterval,Integer32,read-write,,current,,The break interval in miliseconds.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.64,CYCLADES-ACS5K-CONF-MIB::cySPortRemoteIP6,OCTET,read-write,,current,,This is the default IPv6 address of the serial port.
.1.3.6.1.4.1.2925.8.2.6.2.1.1.65,CYCLADES-ACS5K-CONF-MIB::cySPortPrefix6,Integer32,read-write,,current,,Port IP address network prefix length.
.1.3.6.1.4.1.2925.8.3,CYCLADES-ACS5K-INFO-MIB::cyACS5KInfo,,,,,,This module defines objects of the ACS/TS/ACS5000 information
.1.3.6.1.4.1.2925.8.3.1,CYCLADES-ACS5K-INFO-MIB::cyInfoSerialTable,,not-accessible,,current,,This is the information of the specific serial port
.1.3.6.1.4.1.2925.8.3.1.1,CYCLADES-ACS5K-INFO-MIB::cyisPortEntry,,not-accessible,cyISPortNumber,current,,One particular serial port 
.1.3.6.1.4.1.2925.8.3.1.1.1,CYCLADES-ACS5K-INFO-MIB::cyISPortNumber,Integer32,read-only,,current,,number to identifier the serial port.
.1.3.6.1.4.1.2925.8.3.1.1.2,CYCLADES-ACS5K-INFO-MIB::cyISPortTty,OCTET,read-only,,current,,The device name for the serial port.
.1.3.6.1.4.1.2925.8.3.1.1.3,CYCLADES-ACS5K-INFO-MIB::cyISPortName,OCTET,read-only,,current,,Alias name given to the server connected to the serial port.
.1.3.6.1.4.1.2925.8.3.1.1.4,CYCLADES-ACS5K-INFO-MIB::cyISPortSpeed,Integer32,read-only,,current,,The speed for serial port.
.1.3.6.1.4.1.2925.8.3.1.1.5,CYCLADES-ACS5K-INFO-MIB::cyISPortTxBytes,Counter32,read-only,,current,,The number of transmited bytes by the serial port.
.1.3.6.1.4.1.2925.8.3.1.1.6,CYCLADES-ACS5K-INFO-MIB::cyISPortRXBytes,Counter32,read-only,,current,,The number of received bytes by the serial port.
.1.3.6.1.4.1.2925.8.3.1.1.7,CYCLADES-ACS5K-INFO-MIB::cyISPortErrFrame,Counter32,read-only,,current,,The number of frame error.
.1.3.6.1.4.1.2925.8.3.1.1.8,CYCLADES-ACS5K-INFO-MIB::cyISPortErrParity,Counter32,read-only,,current,,The number of parity error.
.1.3.6.1.4.1.2925.8.3.1.1.9,CYCLADES-ACS5K-INFO-MIB::cyISPortErrBreaks,Counter32,read-only,,current,,The number of breaks error.
.1.3.6.1.4.1.2925.8.3.1.1.10,CYCLADES-ACS5K-INFO-MIB::cyISPortErrOverrun,Counter32,read-only,,current,,The number of overrun error.
.1.3.6.1.4.1.2925.8.3.1.1.11,CYCLADES-ACS5K-INFO-MIB::cyISPortSigDTR,INTEGER,read-only,,current,down(0):up(1),The state of DTR signal.
.1.3.6.1.4.1.2925.8.3.1.1.12,CYCLADES-ACS5K-INFO-MIB::cyISPortSigCD,INTEGER,read-only,,current,down(0):up(1),The state of DCD signal.
.1.3.6.1.4.1.2925.8.3.1.1.13,CYCLADES-ACS5K-INFO-MIB::cyISPortSigDSR,INTEGER,read-only,,current,down(0):up(1),The state of DSR signal.
.1.3.6.1.4.1.2925.8.3.1.1.14,CYCLADES-ACS5K-INFO-MIB::cyISPortSigRTS,INTEGER,read-only,,current,down(0):up(1),The state of RTS signal.
.1.3.6.1.4.1.2925.8.3.1.1.15,CYCLADES-ACS5K-INFO-MIB::cyISPortSigCTS,INTEGER,read-only,,current,down(0):up(1),The state of CTS signal.
.1.3.6.1.4.1.2925.8.3.1.1.16,CYCLADES-ACS5K-INFO-MIB::cyISPortSigRI,INTEGER,read-only,,current,down(0):up(1),The state of RI signal.
.1.3.6.1.4.1.2925.8.4,CYCLADES-ACS5K-ADM-MIB::cyACS5KAdm,,,,,,This module defines objects of the ACS/TS/ACS5000 administration
.1.3.6.1.4.1.2925.8.4.1,CYCLADES-ACS5K-ADM-MIB::cyACS5KSave,INTEGER,read-write,,current,nosave(0):save(1),Exec saveconf command
.1.3.6.1.4.1.2925.8.4.2,CYCLADES-ACS5K-ADM-MIB::cyACS5KSerialHUP,INTEGER,read-write,,current,norestartportslave(0):restartportslave(1),Exec signal_ras hup command
.1.3.6.1.4.1.2925.8.5,CYCLADES-ACS5K-PM-MIB::cyACS5KPM,,,,,,This module defines objects of the Proxy for PM 
.1.3.6.1.4.1.2925.8.5.1,CYCLADES-ACS5K-PM-MIB::cyNumberOfPM,Integer32,read-only,,current,,The total number of PM's connected on the unit
.1.3.6.1.4.1.2925.8.5.2,CYCLADES-ACS5K-PM-MIB::cyPMTable,,not-accessible,,current,,Allows to read information about each connected PM
.1.3.6.1.4.1.2925.8.5.2.1,CYCLADES-ACS5K-PM-MIB::cyPMEntry,,not-accessible,cyPMSerialPortNumber,current,,Information about the connected PM
.1.3.6.1.4.1.2925.8.5.2.1.1,CYCLADES-ACS5K-PM-MIB::cyPMSerialPortNumber,Integer32,read-only,,current,,The number of the serial port when the PM is connected.
.1.3.6.1.4.1.2925.8.5.2.1.2,CYCLADES-ACS5K-PM-MIB::cyPMNumberOutlets,Integer32,read-only,,current,,Number of outlets.
.1.3.6.1.4.1.2925.8.5.2.1.3,CYCLADES-ACS5K-PM-MIB::cyPMNumberUnits,Integer32,read-only,,current,,Total number of PM unists that are accessed by this 
.1.3.6.1.4.1.2925.8.5.2.1.4,CYCLADES-ACS5K-PM-MIB::cyPMCurrent,OCTET,read-only,,current,,Current reading for the PM.
.1.3.6.1.4.1.2925.8.5.2.1.5,CYCLADES-ACS5K-PM-MIB::cyPMVersion,OCTET,read-only,,current,,The software version of the PM.
.1.3.6.1.4.1.2925.8.5.2.1.7,CYCLADES-ACS5K-PM-MIB::cyPMCommand,OCTET,read-write,,current,,A character string for the user to send commands to
.1.3.6.1.4.1.2925.8.5.3,CYCLADES-ACS5K-PM-MIB::cyPMUnitTable,,not-accessible,,current,,Allow operations on specific PM unit connected
.1.3.6.1.4.1.2925.8.5.3.1,CYCLADES-ACS5K-PM-MIB::cyPMUnitEntry,,not-accessible,cyPMSerialPortNumber:cyPMUnitNumber,current,,Allow operations on outlet
.1.3.6.1.4.1.2925.8.5.3.1.1,CYCLADES-ACS5K-PM-MIB::cyPMUnitNumber,Integer32,not-accessible,,current,,The number of the PM unit in the daisy-chained mode.
.1.3.6.1.4.1.2925.8.5.3.1.2,CYCLADES-ACS5K-PM-MIB::cyPMUnitVersion,OCTET,read-only,,current,,The software version of this PM unit.
.1.3.6.1.4.1.2925.8.5.3.1.3,CYCLADES-ACS5K-PM-MIB::cyPMUnitOutlets,Integer32,read-only,,current,,Number of outlets of this PM unit.
.1.3.6.1.4.1.2925.8.5.3.1.4,CYCLADES-ACS5K-PM-MIB::cyPMUnitFirstOutlet,Integer32,read-only,,current,,Number of the first outlet of this PM unit.
.1.3.6.1.4.1.2925.8.5.3.1.5,CYCLADES-ACS5K-PM-MIB::cyPMUnitCurrent,Integer32,read-only,,current,,Current of this PM unit in AMP. AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.2925.8.5.3.1.6,CYCLADES-ACS5K-PM-MIB::cyPMUnitMaxCurrent,Integer32,read-only,,current,,Maximum current of this PM unit in AMP. AMP * 10. You need to translate the readed value (Ex. : value is 5, the maximum current is 0.5 AMP.)
.1.3.6.1.4.1.2925.8.5.3.1.9,CYCLADES-ACS5K-PM-MIB::cyPMUnitSequenceInterval,Integer32,read-only,,current,,Sequence interval delay.  Valid values are 2 to 15 (seconds).
.1.3.6.1.4.1.2925.8.5.3.1.10,CYCLADES-ACS5K-PM-MIB::cyPMUnitCycleInterval,Integer32,read-only,,current,,Number of seconds that a socket stays off 
.1.3.6.1.4.1.2925.8.5.3.1.11,CYCLADES-ACS5K-PM-MIB::cyPMUnitID,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.2925.8.5.3.1.12,CYCLADES-ACS5K-PM-MIB::cyPMUnitPhases,INTEGER,read-only,,current,single-phase(0):three-phase(3),Number of phases of this PDU unit.
.1.3.6.1.4.1.2925.8.5.3.1.13,CYCLADES-ACS5K-PM-MIB::cyPMUnitBanks,Integer32,read-only,,current,,Number of banks of this PDU unit.
.1.3.6.1.4.1.2925.8.5.3.1.14,CYCLADES-ACS5K-PM-MIB::cyPMUnitNominalVoltage,Integer32,read-only,,current,,Nominal Voltage configured for this PDU unit, when it does not have voltage sensor
.1.3.6.1.4.1.2925.8.5.3.1.15,CYCLADES-ACS5K-PM-MIB::cyPMUnitPower,Integer32,read-only,,current,,Power Consumption of this PDU unit (it is estimated when PDU does not have voltage sensor).
.1.3.6.1.4.1.2925.8.5.4,CYCLADES-ACS5K-PM-MIB::cyOutletTable,,not-accessible,,current,,Allow operations on outlet
.1.3.6.1.4.1.2925.8.5.4.1,CYCLADES-ACS5K-PM-MIB::cyOutletEntry,,not-accessible,cyPMSerialPortNumber:cyOutletNumber,current,,Allow operations on outlet
.1.3.6.1.4.1.2925.8.5.4.1.1,CYCLADES-ACS5K-PM-MIB::cyOutletNumber,Integer32,not-accessible,,current,,The outlet number on the PM. Zero is ALL outlets.
.1.3.6.1.4.1.2925.8.5.4.1.2,CYCLADES-ACS5K-PM-MIB::cyOutletName,OCTET,read-write,,current,,The name given to a particular outlet Maximum size is 8 characters.
.1.3.6.1.4.1.2925.8.5.4.1.3,CYCLADES-ACS5K-PM-MIB::cyOutletServer,OCTET,read-only,,current,,Alias of the Server connected to this outlet .
.1.3.6.1.4.1.2925.8.5.4.1.4,CYCLADES-ACS5K-PM-MIB::cyOutletPower,INTEGER,read-write,,current,off(0):on(1):cycle(2):unknow(3),Getting this object will return the power state of
.1.3.6.1.4.1.2925.8.5.4.1.5,CYCLADES-ACS5K-PM-MIB::cyOutletLock,INTEGER,read-write,,current,unlock(0):lock(1):unknow(2),Getting this object will return the lock state of
.1.3.6.1.4.1.2925.8.5.4.1.6,CYCLADES-ACS5K-PM-MIB::cyOutletPUInterval,Integer32,read-write,,current,,The power unit interval of this outlet in seconds. seconds * 10. You need to translate the readed value (Ex. : value is 5, the interval is 0.5 seconds.)
.1.3.6.1.4.1.2925.8.5.4.1.7,CYCLADES-ACS5K-PM-MIB::cyOutletMinimumOnInterval,Integer32,read-only,,current,,Minimum time in seconds an outlet will stay on before 
.1.3.6.1.4.1.2925.8.5.4.1.8,CYCLADES-ACS5K-PM-MIB::cyOutletMinimumOffInterval,Integer32,read-only,,current,,Minimum time in seconds an outlet will stay off before 
.1.3.6.1.4.1.2925.8.5.4.1.9,CYCLADES-ACS5K-PM-MIB::cyOutletWakeupState,Integer32,read-only,,current,,Outlet state after a cold boot. It can be set to on 
.1.3.6.1.4.1.2925.8.5.4.1.10,CYCLADES-ACS5K-PM-MIB::cyOutletPduID,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.2925.8.5.4.1.11,CYCLADES-ACS5K-PM-MIB::cyOutletPduNumber,Integer32,not-accessible,,current,,The number of the PDU unit in the daisy-chained mode.
.1.3.6.1.4.1.2925.8.5.5,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTable,,not-accessible,,current,,Allow operations on elecmon element of the PDUs
.1.3.6.1.4.1.2925.8.5.5.1,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTableEntry,,not-accessible,cyPMElecPduTablePortNumber:cyPMElecPduTablePduNumber,current,,each entry has the information about the elecmon element of the PDUs.
.1.3.6.1.4.1.2925.8.5.5.1.1,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePortNumber,Integer32,read-only,,current,,Serial Port number where the PDU is connected.
.1.3.6.1.4.1.2925.8.5.5.1.2,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePduNumber,Integer32,read-only,,current,,The number of the PDU unit in the daisy-chained mode
.1.3.6.1.4.1.2925.8.5.5.1.3,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTableCurrentValue,Integer32,read-only,,current,,Actual value of current in the element (A x 10).
.1.3.6.1.4.1.2925.8.5.5.1.4,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTableCurrentMax,Integer32,read-write,,current,,Maximum detected value of current in the element (A x 10). 
.1.3.6.1.4.1.2925.8.5.5.1.5,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePowerValue,Integer32,read-only,,current,,Actual value of power in the element (W x 10).
.1.3.6.1.4.1.2925.8.5.5.1.6,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePowerMax,Integer32,read-write,,current,,Maximum value of power in the element (W x 10).
.1.3.6.1.4.1.2925.8.5.5.1.7,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage in the element (V).When element 
.1.3.6.1.4.1.2925.8.5.5.1.8,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTableVoltageMax,Integer32,read-write,,current,,Maximum value of voltage in the element (V). When element 
.1.3.6.1.4.1.2925.8.5.5.1.9,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in the element (Pf x 10). 
.1.3.6.1.4.1.2925.8.5.5.1.10,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePowerFactorMax,Integer32,read-write,,current,,Maximum value of power factor in the element (Pf x 10). 
.1.3.6.1.4.1.2925.8.5.5.1.11,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePowerType,INTEGER,read-only,,current,estimated(1):measured(2),This PDU unit's Power sensor type.
.1.3.6.1.4.1.2925.8.5.5.1.12,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTableVoltageType,INTEGER,read-only,,current,estimated(1):measured(2),This PDU unit's has voltage sensor type.
.1.3.6.1.4.1.2925.8.5.5.1.13,CYCLADES-ACS5K-PM-MIB::cyPMElecPduTablePowerFactorType,INTEGER,read-only,,current,estimated(1):measured(2),This PDU unit's Power Factor sensor type.
.1.3.6.1.4.1.2925.8.5.6,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTable,,not-accessible,,current,,Allow operations on elecmon element for phases
.1.3.6.1.4.1.2925.8.5.6.1,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableEntry,,not-accessible,cyPMElecPhaseTablePortNumber:cyPMElecPhaseTablePduNumber:cyPMElecPhaseTableIndex,current,,each entry has the information about the elecmon for phase.
.1.3.6.1.4.1.2925.8.5.6.1.1,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePortNumber,Integer32,read-only,,current,,Serial Port number where the PDU is connected.
.1.3.6.1.4.1.2925.8.5.6.1.2,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePduNumber,Integer32,read-only,,current,,The number of the PDU unit in the daisy-chained mode
.1.3.6.1.4.1.2925.8.5.6.1.3,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableIndex,Integer32,read-only,,current,,index of the phase in the PDU. Index can be 1,2 or 3.
.1.3.6.1.4.1.2925.8.5.6.1.4,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableName,OCTET,read-only,,current,,Sys-name of the phase.
.1.3.6.1.4.1.2925.8.5.6.1.5,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableCurrentValue,Integer32,read-only,,current,,Actual value of current in the phase (A x 10).
.1.3.6.1.4.1.2925.8.5.6.1.6,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableCurrentMax,Integer32,read-write,,current,,Maximum detected value of current in the phase (A x 10). 
.1.3.6.1.4.1.2925.8.5.6.1.7,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePowerValue,Integer32,read-only,,current,,Actual value of power in the phase (W x 10).
.1.3.6.1.4.1.2925.8.5.6.1.8,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePowerMax,Integer32,read-write,,current,,Maximum value of power in the phase (W x 10).Write operation
.1.3.6.1.4.1.2925.8.5.6.1.9,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage in the phase (V).When phase does 
.1.3.6.1.4.1.2925.8.5.6.1.10,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableVoltageMax,Integer32,read-write,,current,,Maximum value of voltage in the phase (V). When phase does 
.1.3.6.1.4.1.2925.8.5.6.1.11,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in the phase (Pf x 10). When 
.1.3.6.1.4.1.2925.8.5.6.1.12,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePowerFactorMax,Integer32,read-write,,current,,Maximum value of power factor in the phase (Pf x 10). When 
.1.3.6.1.4.1.2925.8.5.6.1.13,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePowerType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Power sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.6.1.14,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTableVoltageType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Voltage sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.6.1.15,CYCLADES-ACS5K-PM-MIB::cyPMElecPhaseTablePowerFactorType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Power Factor sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.7,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTable,,not-accessible,,current,,Allow operations on elecmon element for banks
.1.3.6.1.4.1.2925.8.5.7.1,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableEntry,,not-accessible,cyPMElecBankTablePortNumber:cyPMElecBankTablePduNumber:cyPMElecBankTableIndex,current,,each entry has the information about the elecmon for Bank.
.1.3.6.1.4.1.2925.8.5.7.1.1,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePortNumber,Integer32,read-only,,current,,Serial Port number where the PDU is connected.
.1.3.6.1.4.1.2925.8.5.7.1.2,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePduNumber,Integer32,read-only,,current,,The number of the PDU unit in the daisy-chained mode
.1.3.6.1.4.1.2925.8.5.7.1.3,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableIndex,Integer32,read-only,,current,,index of the Bank in the PDU. Index can be 1,2, ... number of banks of the PDU.
.1.3.6.1.4.1.2925.8.5.7.1.4,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableName,OCTET,read-only,,current,,Sys-name of the Bank.
.1.3.6.1.4.1.2925.8.5.7.1.5,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableCurrentValue,Integer32,read-only,,current,,Actual value of current in the Bank (A x 10).
.1.3.6.1.4.1.2925.8.5.7.1.6,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableCurrentMax,Integer32,read-write,,current,,Maximum detected value of current in the Bank (A x 10). 
.1.3.6.1.4.1.2925.8.5.7.1.7,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePowerValue,Integer32,read-only,,current,,Actual value of power in the Bank (W x 10).
.1.3.6.1.4.1.2925.8.5.7.1.8,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePowerMax,Integer32,read-write,,current,,Maximum value of power in the Bank (W x 10).Write operation
.1.3.6.1.4.1.2925.8.5.7.1.9,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage in the Bank (V).When Bank does 
.1.3.6.1.4.1.2925.8.5.7.1.10,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableVoltageMax,Integer32,read-write,,current,,Maximum value of voltage in the Bank (V). When Bank does 
.1.3.6.1.4.1.2925.8.5.7.1.11,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in the Bank (Pf x 10). When 
.1.3.6.1.4.1.2925.8.5.7.1.12,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePowerFactorMax,Integer32,read-write,,current,,Maximum value of power factor in the Bank (Pf x 10). When 
.1.3.6.1.4.1.2925.8.5.7.1.13,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePowerType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Power sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.7.1.14,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTableVoltageType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Voltage sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.7.1.15,CYCLADES-ACS5K-PM-MIB::cyPMElecBankTablePowerFactorType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Power Factor sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.8,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTable,,not-accessible,,current,,Allow operations on elecmon element for outlets
.1.3.6.1.4.1.2925.8.5.8.1,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableEntry,,not-accessible,cyPMElecOutletTablePortNumber:cyPMElecOutletTablePduNumber:cyPMElecOutletTableNumber,current,,each entry has the information about the elecmon for Outlet.
.1.3.6.1.4.1.2925.8.5.8.1.1,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePortNumber,Integer32,read-only,,current,,Serial Port number where the PDU is connected.
.1.3.6.1.4.1.2925.8.5.8.1.2,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePduNumber,Integer32,read-only,,current,,The number of the PDU unit in the daisy-chained mode
.1.3.6.1.4.1.2925.8.5.8.1.3,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableNumber,Integer32,read-only,,current,,outlet number in the PDU
.1.3.6.1.4.1.2925.8.5.8.1.4,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableName,OCTET,read-only,,current,,name of the Outlet.
.1.3.6.1.4.1.2925.8.5.8.1.5,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableCurrentValue,Integer32,read-only,,current,,Actual value of current in the Outlet (A x 10).
.1.3.6.1.4.1.2925.8.5.8.1.6,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableCurrentMax,Integer32,read-write,,current,,Maximum detected value of current in the Outlet (A x 10). 
.1.3.6.1.4.1.2925.8.5.8.1.7,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePowerValue,Integer32,read-only,,current,,Actual value of power in the Outlet (W x 10).
.1.3.6.1.4.1.2925.8.5.8.1.8,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePowerMax,Integer32,read-write,,current,,Maximum value of power in the Outlet (W x 10).Write operation
.1.3.6.1.4.1.2925.8.5.8.1.9,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage in the Outlet (V).When Outlet does 
.1.3.6.1.4.1.2925.8.5.8.1.10,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableVoltageMax,Integer32,read-write,,current,,Maximum value of voltage in the Outlet (V). When Outlet does 
.1.3.6.1.4.1.2925.8.5.8.1.11,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in the Outlet (Pf x 10). When 
.1.3.6.1.4.1.2925.8.5.8.1.12,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePowerFactorMax,Integer32,read-write,,current,,Maximum value of power factor in the Outlet (Pf x 10). When 
.1.3.6.1.4.1.2925.8.5.8.1.13,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePowerType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Power sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.8.1.14,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTableVoltageType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Voltage sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.8.1.15,CYCLADES-ACS5K-PM-MIB::cyPMElecOutletTablePowerFactorType,INTEGER,read-only,,current,estimated(1):measured(2),The type of Power Factor sensor for this elecmon
.1.3.6.1.4.1.2925.8.5.9,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTable,,not-accessible,,current,,Allow operations on environmental monitors
.1.3.6.1.4.1.2925.8.5.9.1,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableEntry,,not-accessible,cyPMEnvMonTablePortNumber:cyPMEnvMonTablePduNumber:cyPMEnvMonTableIndex,current,,each entry has the information about the environmental monitors.
.1.3.6.1.4.1.2925.8.5.9.1.1,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTablePortNumber,Integer32,read-only,,current,,Serial Port number where the PDU is connected.
.1.3.6.1.4.1.2925.8.5.9.1.2,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTablePduNumber,Integer32,read-only,,current,,The number of the PDU unit in the daisy-chained mode
.1.3.6.1.4.1.2925.8.5.9.1.3,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableIndex,Integer32,read-only,,current,,index of the environmental monitor in the PDU.
.1.3.6.1.4.1.2925.8.5.9.1.4,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableName,OCTET,read-only,,current,,Name of the environmental monitor.
.1.3.6.1.4.1.2925.8.5.9.1.5,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableType,INTEGER,read-only,,current,temp-internal(1):temperature(2):humidity(3):air-flow(4):smoke(5):dry-concact(6):water-level(7):motion(8):unplugged(9):unknown(10),The type of environmental monitor.
.1.3.6.1.4.1.2925.8.5.9.1.6,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableStatus,INTEGER,read-only,,current,normal(1):triggered(2):not-applicable(3),The status of Dry-Contact/Water-level/Smoke/Motion monitors. 
.1.3.6.1.4.1.2925.8.5.9.1.7,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableValue,Integer32,read-only,,current,,Actual value of Temperature/Humidity/Air-flow monitors (x 10).
.1.3.6.1.4.1.2925.8.5.9.1.8,CYCLADES-ACS5K-PM-MIB::cyPMEnvMonTableMaxValue,Integer32,read-write,,current,,Maximum detected value of Temperature/Humidity/Air-flow monitor (x 10). 
.1.3.6.1.4.1.10418,ACS-MIB::anonymous#0,,,,,,
.1.3.6.1.4.1.10418.16,ACS-MIB::acs,,,,,,This module defines the Avocent MIB extensions to  ACS60xx products.
.1.3.6.1.4.1.10418.16.1,ACS-MIB::acsProducts,,,,,,
.1.3.6.1.4.1.10418.16.1.1,ACS-MIB::acs6016,,,,,,
.1.3.6.1.4.1.10418.16.1.2,ACS-MIB::acs6032,,,,,,
.1.3.6.1.4.1.10418.16.1.3,ACS-MIB::acs6048,,,,,,
.1.3.6.1.4.1.10418.16.1.4,ACS-MIB::acs6004,,,,,,
.1.3.6.1.4.1.10418.16.1.5,ACS-MIB::acs6008,,,,,,
.1.3.6.1.4.1.10418.16.2,ACS-MIB::acsManagement,,,,,,
.1.3.6.1.4.1.10418.16.2.1,ACS-MIB::acsAppliance,,,,,,
.1.3.6.1.4.1.10418.16.2.1.1,ACS-MIB::acsHostName,OCTET,read-only,,current,,The appliance name
.1.3.6.1.4.1.10418.16.2.1.2,ACS-MIB::acsProductModel,OCTET,read-only,,current,,The appliance product model
.1.3.6.1.4.1.10418.16.2.1.3,ACS-MIB::acsPartNumber,OCTET,read-only,,current,,The part number of this appliance as shown on the label attached or imprinted on the appliance.
.1.3.6.1.4.1.10418.16.2.1.4,ACS-MIB::acsSerialNumber,OCTET,read-only,,current,,The serial number of this appliance as shown on the label attached or imprinted on the appliance.
.1.3.6.1.4.1.10418.16.2.1.5,ACS-MIB::acsEIDNumber,OCTET,read-only,,current,,The electronic ID number (EID) of this appliance as shown on the label attached or imprinted on the appliance.
.1.3.6.1.4.1.10418.16.2.1.6,ACS-MIB::acsBootcodeVersion,OCTET,read-only,,current,,The version of the bootcode of this appliance.
.1.3.6.1.4.1.10418.16.2.1.7,ACS-MIB::acsFirmwareVersion,OCTET,read-only,,current,,The version of the firmware of this appliance.
.1.3.6.1.4.1.10418.16.2.1.8,ACS-MIB::acsPowerSupply,,,,,,It gives information about Power Supply of this appliance
.1.3.6.1.4.1.10418.16.2.1.8.1,ACS-MIB::acsPowerSupplyNumber,Integer32,read-only,,current,,Number of the power supplies of this appliance
.1.3.6.1.4.1.10418.16.2.1.8.2,ACS-MIB::acsPowerSupplyStatePw1,INTEGER,read-only,,current,statePowerOn(1):statePowerOff(2):powerNotInstaled(9999),State of the first power supply
.1.3.6.1.4.1.10418.16.2.1.8.3,ACS-MIB::acsPowerSupplyStatePw2,INTEGER,read-only,,current,statePowerOn(1):statePowerOff(2):powerNotInstaled(9999),State of the second power supply
.1.3.6.1.4.1.10418.16.2.1.9,ACS-MIB::acsReboot,INTEGER,read-write,,current,noAction(1):reboot(2),A set value of reboot(2) will reboot the appliance. noAction(1) = always returned in a GET. Does nothing if SET.  reboot(2) = when SET the appliance immediately reboots.
.1.3.6.1.4.1.10418.16.2.2,ACS-MIB::acsSessions,,,,,,
.1.3.6.1.4.1.10418.16.2.2.1,ACS-MIB::acsActiveSessionsNumberOfSession,Integer32,read-only,,current,,Number of active sessions.
.1.3.6.1.4.1.10418.16.2.2.2,ACS-MIB::acsActiveSessionsTable,,not-accessible,,current,,This table contains the list of active sessions.
.1.3.6.1.4.1.10418.16.2.2.2.1,ACS-MIB::acsActiveSessionsTableEntry,,not-accessible,acsActiveSessionsTableIndex,current,,each entry has the information about the active session
.1.3.6.1.4.1.10418.16.2.2.2.1.1,ACS-MIB::acsActiveSessionsTableIndex,Integer32,read-only,,current,,A unique index representing an entry in this table.
.1.3.6.1.4.1.10418.16.2.2.2.1.2,ACS-MIB::acsActiveSessionsTableUser,OCTET,read-only,,current,,The name of the user that opens this session.
.1.3.6.1.4.1.10418.16.2.2.2.1.3,ACS-MIB::acsActiveSessionsTableGroup,OCTET,read-only,,current,,The name of the group that the user belongs to.
.1.3.6.1.4.1.10418.16.2.2.2.1.4,ACS-MIB::acsActiveSessionsTableType,OCTET,read-only,,current,,The session type.
.1.3.6.1.4.1.10418.16.2.2.2.1.5,ACS-MIB::acsActiveSessionsTableConnection,OCTET,read-only,,current,,Connection type.
.1.3.6.1.4.1.10418.16.2.2.2.1.6,ACS-MIB::acsActiveSessionsTableSessionTime,OCTET,read-only,,current,,Time of the session
.1.3.6.1.4.1.10418.16.2.2.2.1.7,ACS-MIB::acsActiveSessionsTableFrom,OCTET,read-only,,current,,The source IP address of the session.
.1.3.6.1.4.1.10418.16.2.2.2.1.8,ACS-MIB::acsActiveSessionsTableKill,INTEGER,read-write,,current,noAction(1):killSession(2),A set value of killSession(2) will kill the session. noAction(1) = always returned in a GET. Does nothing if SET. killSession(2)= when SET the appliance immediately kills the session.
.1.3.6.1.4.1.10418.16.2.3,ACS-MIB::acsSerialPort,,,,,,
.1.3.6.1.4.1.10418.16.2.3.1,ACS-MIB::acsSerialPortNumberOfPorts,Integer32,read-only,,current,,Number of Serial Ports (physical serial port plus Aux Port.
.1.3.6.1.4.1.10418.16.2.3.2,ACS-MIB::acsSerialPortTable,,not-accessible,,current,,This table contains information about serial ports.
.1.3.6.1.4.1.10418.16.2.3.2.1,ACS-MIB::acsSerialPortTableEntry,,not-accessible,acsSerialPortTableNumber,current,,each entry has the information about specific serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.1,ACS-MIB::acsSerialPortTableNumber,Integer32,read-only,,current,,A unique index representing an entry in this table. It is the number of the serial port. For AUX port, the number will be the number of physical serial ports plus 1.
.1.3.6.1.4.1.10418.16.2.3.2.1.2,ACS-MIB::acsSerialPortTableDeviceName,OCTET,read-only,,current,,The associated device name for the serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.3,ACS-MIB::acsSerialPortTableStatus,INTEGER,read-only,,current,disabled(1):idle(2):inUse(3),The status of the serial port: disabled(1) = it was configured as disable.  idle(2) = there is not any session opened in this port. inUse(3) = there is session(s) opened in this port.
.1.3.6.1.4.1.10418.16.2.3.2.1.4,ACS-MIB::acsSerialPortTableName,OCTET,read-only,,current,,Name associated with this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.5,ACS-MIB::acsSerialPortTableProfile,INTEGER,read-only,,current,casProfile(1):tsProfile(2):dialInProfile(3):powerProfile(4),Configured profile for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.6,ACS-MIB::acsSerialPortTablePinOut,INTEGER,read-only,,current,cyclades(1):cisco(2),RJ45 Pin-out configured for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.7,ACS-MIB::acsSerialPortTableComSpeed,INTEGER,read-only,,current,speed300bps(300):speed600bps(600):speed1200bps(1200):speed2400bps(2400):speed4800bps(4800):speed9600bps(9600):speed19200bps(19200):speed38400bps(38400):speed57600bps(57600):speed115200bps(115200):speed230400bps(230400):speed460800bps(460800),Speed configured for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.8,ACS-MIB::acsSerialPortTableComParity,INTEGER,read-only,,current,none(1):odd(2):even(3),Parity configured for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.9,ACS-MIB::acsSerialPortTableComDataSize,Integer32,read-only,,current,,Data Size configured for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.10,ACS-MIB::acsSerialPortTableComStopBits,Integer32,read-only,,current,,Number of Stop Bits configured for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.11,ACS-MIB::acsSerialPortTableComFlowControl,INTEGER,read-only,,current,none(1):hardware(2):software(3),Flow Control configured for this serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.12,ACS-MIB::acsSerialPortTableSignalStateDTR,INTEGER,read-only,,current,up(1):down(2),State of the DTR RS-232C signal.
.1.3.6.1.4.1.10418.16.2.3.2.1.13,ACS-MIB::acsSerialPortTableSignalStateDCD,INTEGER,read-only,,current,up(1):down(2),State of the DCD RS-232C signal.
.1.3.6.1.4.1.10418.16.2.3.2.1.14,ACS-MIB::acsSerialPortTableSignalStateRTS,INTEGER,read-only,,current,up(1):down(2),State of the RTS RS-232C signal.
.1.3.6.1.4.1.10418.16.2.3.2.1.15,ACS-MIB::acsSerialPortTableSignalStateCTS,INTEGER,read-only,,current,up(1):down(2),State of the CTS RS-232C signal.
.1.3.6.1.4.1.10418.16.2.3.2.1.16,ACS-MIB::acsSerialPortTableTxBytes,Integer32,read-only,,current,,The number of transmited bytes by the serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.17,ACS-MIB::acsSerialPortTableRxBytes,Integer32,read-only,,current,,The number of received bytes by the serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.18,ACS-MIB::acsSerialPortTableFrameError,Integer32,read-only,,current,,The number of frame error detected in the serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.19,ACS-MIB::acsSerialPortTableParityError,Integer32,read-only,,current,,The number of parity error detected in the serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.20,ACS-MIB::acsSerialPortTableBreak,Integer32,read-only,,current,,The number of break detected in the serial port.
.1.3.6.1.4.1.10418.16.2.3.2.1.21,ACS-MIB::acsSerialPortTableOverrun,Integer32,read-only,,current,,The number of overrun error detected in the serial port.
.1.3.6.1.4.1.10418.16.2.5,ACS-MIB::acsPowerMgmt,,,,,,
.1.3.6.1.4.1.10418.16.2.5.1,ACS-MIB::acsPowerMgmtNumSerialPorts,Integer32,read-only,,current,,The number of Serial Ports that has PDU connected on the appliance.
.1.3.6.1.4.1.10418.16.2.5.2,ACS-MIB::acsPowerMgmtSerialTable,,not-accessible,,current,,Information about each serial port thas has PDU connect.
.1.3.6.1.4.1.10418.16.2.5.2.1,ACS-MIB::acsPowerMgmtSerialTableEntry,,not-accessible,acsPowerMgmtSerialTableIndex,current,,Information about each serial port thas has PDU connect.
.1.3.6.1.4.1.10418.16.2.5.2.1.1,ACS-MIB::acsPowerMgmtSerialTableIndex,Integer32,read-only,,current,,The index of the register.
.1.3.6.1.4.1.10418.16.2.5.2.1.2,ACS-MIB::acsPowerMgmtSerialTablePortNumber,Integer32,read-only,,current,,The number of the serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.2.1.3,ACS-MIB::acsPowerMgmtSerialTableDeviceName,OCTET,read-only,,current,,The device name of this serial port.
.1.3.6.1.4.1.10418.16.2.5.2.1.4,ACS-MIB::acsPowerMgmtSerialTableNumberPDUs,Integer32,read-only,,current,,Total number of units connected in this serial port.
.1.3.6.1.4.1.10418.16.2.5.3,ACS-MIB::acsPowerMgmtPDUTable,,not-accessible,,current,,This table contains the list of detected PDUs.
.1.3.6.1.4.1.10418.16.2.5.3.1,ACS-MIB::acsPowerMgmtPDUTableEntry,,not-accessible,acsPowerMgmtPDUTablePortNumber:acsPowerMgmtPDUTablePduIndex,current,,each entry has the information about the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.1,ACS-MIB::acsPowerMgmtPDUTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.3.1.2,ACS-MIB::acsPowerMgmtPDUTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.16.2.5.3.1.3,ACS-MIB::acsPowerMgmtPDUTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.16.2.5.3.1.4,ACS-MIB::acsPowerMgmtPDUTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.3.1.5,ACS-MIB::acsPowerMgmtPDUTableModel,OCTET,read-only,,current,,Model of the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.6,ACS-MIB::acsPowerMgmtPDUTableVendor,OCTET,read-only,,current,,Vendor of the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.7,ACS-MIB::acsPowerMgmtPDUTableFirmwareVersion,OCTET,read-only,,current,,Version of the PDU firmware.
.1.3.6.1.4.1.10418.16.2.5.3.1.8,ACS-MIB::acsPowerMgmtPDUTableNumberOfOutlets,Integer32,read-only,,current,,Number of outlets of the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.9,ACS-MIB::acsPowerMgmtPDUTableCurrentNOS,Integer32,read-only,,obsolete,,Number of current sensors in the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.10,ACS-MIB::acsPowerMgmtPDUTableCurrent1Value,Integer32,read-only,,obsolete,,Current of the sensor 1 in this PDU unit in AMP. The value of this object is the actual current in  AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.10418.16.2.5.3.1.11,ACS-MIB::acsPowerMgmtPDUTableCurrent1Max,Integer32,read-write,,obsolete,,Maximum current of the sensor 1 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in  AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
.1.3.6.1.4.1.10418.16.2.5.3.1.12,ACS-MIB::acsPowerMgmtPDUTableCurrent2Value,Integer32,read-only,,obsolete,,Current of the sensor 2 in this PDU unit in AMP. The value of this object is the actual current in  AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.10418.16.2.5.3.1.13,ACS-MIB::acsPowerMgmtPDUTableCurrent2Max,Integer32,read-write,,obsolete,,Maximum current of the sensor 2 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in  AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
.1.3.6.1.4.1.10418.16.2.5.3.1.14,ACS-MIB::acsPowerMgmtPDUTableCurrent3Value,Integer32,read-only,,obsolete,,Current of the sensor 3 in this PDU unit in AMP. The value of this object is the actual current in  AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.10418.16.2.5.3.1.15,ACS-MIB::acsPowerMgmtPDUTableCurrent3Max,Integer32,read-write,,obsolete,,Maximum current of the sensor 3 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in  AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
.1.3.6.1.4.1.10418.16.2.5.3.1.16,ACS-MIB::acsPowerMgmtPDUTableTemperatureNOS,Integer32,read-only,,obsolete,,Number of temperature sensors in the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.17,ACS-MIB::acsPowerMgmtPDUTableTemperature1Value,Integer32,read-only,,obsolete,,Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in  degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  If the temperature measurement is not installed this  value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.10418.16.2.5.3.1.18,ACS-MIB::acsPowerMgmtPDUTableTemperature1Max,Integer32,read-write,,obsolete,,Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in  degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  If the temperature measurement is not installed this  value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.16.2.5.3.1.19,ACS-MIB::acsPowerMgmtPDUTableTemperature2Value,Integer32,read-only,,obsolete,,Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in  degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  If the temperature measurement is not installed this  value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.10418.16.2.5.3.1.20,ACS-MIB::acsPowerMgmtPDUTableTemperature2Max,Integer32,read-write,,obsolete,,Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in  degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  If the temperature measurement is not installed this  value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.16.2.5.3.1.21,ACS-MIB::acsPowerMgmtPDUTableTemperature3Value,Integer32,read-only,,obsolete,,Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in  degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  If the temperature measurement is not installed this  value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.10418.16.2.5.3.1.22,ACS-MIB::acsPowerMgmtPDUTableTemperature3Max,Integer32,read-write,,obsolete,,Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in  degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.)  If the temperature measurement is not installed this  value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.16.2.5.3.1.23,ACS-MIB::acsPowerMgmtPDUTableHumidityNOS,Integer32,read-only,,obsolete,,Number of humidity sensors in the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.24,ACS-MIB::acsPowerMgmtPDUTableHumidity1Value,Integer32,read-only,,obsolete,,Humidity of this PM unit . If the humidity measurement is not installed this  value will be 0.
.1.3.6.1.4.1.10418.16.2.5.3.1.25,ACS-MIB::acsPowerMgmtPDUTableHumidity1Max,Integer32,read-write,,obsolete,,Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this  value will be 0. Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.16.2.5.3.1.26,ACS-MIB::acsPowerMgmtPDUTableHumidity2Value,Integer32,read-only,,obsolete,,Humidity of this PM unit . If the humidity measurement is not installed this  value will be 0.
.1.3.6.1.4.1.10418.16.2.5.3.1.27,ACS-MIB::acsPowerMgmtPDUTableHumidity2Max,Integer32,read-write,,obsolete,,Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this  value will be 0. Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.16.2.5.3.1.28,ACS-MIB::acsPowerMgmtPDUTableHumidity3Value,Integer32,read-only,,obsolete,,Humidity of this PM unit . If the humidity measurement is not installed this  value will be 0.
.1.3.6.1.4.1.10418.16.2.5.3.1.29,ACS-MIB::acsPowerMgmtPDUTableHumidity3Max,Integer32,read-write,,obsolete,,Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this  value will be 0. Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.16.2.5.3.1.30,ACS-MIB::acsPowerMgmtPDUTableVoltageNOS,Integer32,read-only,,obsolete,,Number of voltage sensors in the PDU.
.1.3.6.1.4.1.10418.16.2.5.3.1.31,ACS-MIB::acsPowerMgmtPDUTableVoltage1Value,Integer32,read-only,,obsolete,,Voltage of this sensor in this PDU unit.
.1.3.6.1.4.1.10418.16.2.5.3.1.32,ACS-MIB::acsPowerMgmtPDUTableVoltage1Max,Integer32,read-write,,obsolete,,Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
.1.3.6.1.4.1.10418.16.2.5.3.1.33,ACS-MIB::acsPowerMgmtPDUTableVoltage2Value,Integer32,read-only,,obsolete,,Voltage of this sensor in this PDU unit.
.1.3.6.1.4.1.10418.16.2.5.3.1.34,ACS-MIB::acsPowerMgmtPDUTableVoltage2Max,Integer32,read-write,,obsolete,,Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
.1.3.6.1.4.1.10418.16.2.5.3.1.35,ACS-MIB::acsPowerMgmtPDUTableVoltage3Value,Integer32,read-only,,obsolete,,Voltage of this sensor in this PDU unit.
.1.3.6.1.4.1.10418.16.2.5.3.1.36,ACS-MIB::acsPowerMgmtPDUTableVoltage3Max,Integer32,read-write,,obsolete,,Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
.1.3.6.1.4.1.10418.16.2.5.3.1.37,ACS-MIB::acsPowerMgmtPDUTableNumberOfPhases,INTEGER,read-only,,current,single-phase(0):three-phase(3),Number of phases of this PDU unit.
.1.3.6.1.4.1.10418.16.2.5.3.1.38,ACS-MIB::acsPowerMgmtPDUTableNumberOfBanks,Integer32,read-only,,current,,Number of banks of this PDU unit.
.1.3.6.1.4.1.10418.16.2.5.3.1.39,ACS-MIB::acsPowerMgmtPDUTableCurrentValue,Integer32,read-only,,current,,Actual value of current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.40,ACS-MIB::acsPowerMgmtPDUTableCurrentMax,Integer32,read-only,,current,,Max detected value of current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.41,ACS-MIB::acsPowerMgmtPDUTableCurrentMin,Integer32,read-only,,current,,Min detected value of current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.42,ACS-MIB::acsPowerMgmtPDUTableCurrentAvg,Integer32,read-only,,current,,Average value for current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.43,ACS-MIB::acsPowerMgmtPDUTableCurrentReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of current.
.1.3.6.1.4.1.10418.16.2.5.3.1.44,ACS-MIB::acsPowerMgmtPDUTableVoltageType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of voltage values.
.1.3.6.1.4.1.10418.16.2.5.3.1.45,ACS-MIB::acsPowerMgmtPDUTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.16.2.5.3.1.46,ACS-MIB::acsPowerMgmtPDUTableVoltageMax,Integer32,read-only,,current,,Max detected value of voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.16.2.5.3.1.47,ACS-MIB::acsPowerMgmtPDUTableVoltageMin,Integer32,read-only,,current,,Min detected value of voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.16.2.5.3.1.48,ACS-MIB::acsPowerMgmtPDUTableVoltageAvg,Integer32,read-only,,current,,Average value for voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.16.2.5.3.1.49,ACS-MIB::acsPowerMgmtPDUTableVoltageReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of voltage.
.1.3.6.1.4.1.10418.16.2.5.3.1.50,ACS-MIB::acsPowerMgmtPDUTablePowerType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power consumption values.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.51,ACS-MIB::acsPowerMgmtPDUTablePowerValue,Integer32,read-only,,current,,Actual value of power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.52,ACS-MIB::acsPowerMgmtPDUTablePowerMax,Integer32,read-only,,current,,Max detected value of power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.53,ACS-MIB::acsPowerMgmtPDUTablePowerMin,Integer32,read-only,,current,,Min detected value of power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.54,ACS-MIB::acsPowerMgmtPDUTablePowerAvg,Integer32,read-only,,current,,Average value for power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.3.1.55,ACS-MIB::acsPowerMgmtPDUTablePowerReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power consumption.
.1.3.6.1.4.1.10418.16.2.5.3.1.56,ACS-MIB::acsPowerMgmtPDUTablePowerFactorType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power factor values.
.1.3.6.1.4.1.10418.16.2.5.3.1.57,ACS-MIB::acsPowerMgmtPDUTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.3.1.58,ACS-MIB::acsPowerMgmtPDUTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.3.1.59,ACS-MIB::acsPowerMgmtPDUTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.3.1.60,ACS-MIB::acsPowerMgmtPDUTablePowerFactorAvg,Integer32,read-only,,current,,Average value for power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.3.1.61,ACS-MIB::acsPowerMgmtPDUTablePowerFactorReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power factor.
.1.3.6.1.4.1.10418.16.2.5.3.1.62,ACS-MIB::acsPowerMgmtPDUTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the PDU alarm status.
.1.3.6.1.4.1.10418.16.2.5.3.1.63,ACS-MIB::acsPowerMgmtPDUTableEnvSensors,Integer32,read-only,,current,,Number of environmental sensor in this PDU.
.1.3.6.1.4.1.10418.16.2.5.4,ACS-MIB::acsPowerMgmtTotalNumberOfOutlets,Integer32,read-only,,current,,Number of outlets managed by the appliance.
.1.3.6.1.4.1.10418.16.2.5.5,ACS-MIB::acsPowerMgmtOutletsTable,,not-accessible,,current,,This table contains the information about outlets.
.1.3.6.1.4.1.10418.16.2.5.5.1,ACS-MIB::acsPowerMgmtOutletsTableEntry,,not-accessible,acsPowerMgmtOutletsTablePortNumber:acsPowerMgmtOutletsTablePduNumber:acsPowerMgmtOutletsTableNumber,current,,each entry has the information about the outlet.
.1.3.6.1.4.1.10418.16.2.5.5.1.1,ACS-MIB::acsPowerMgmtOutletsTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.16.2.5.5.1.2,ACS-MIB::acsPowerMgmtOutletsTablePduNumber,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.16.2.5.5.1.3,ACS-MIB::acsPowerMgmtOutletsTableNumber,Integer32,read-only,,current,,Number of the outlet in the PDU.
.1.3.6.1.4.1.10418.16.2.5.5.1.4,ACS-MIB::acsPowerMgmtOutletsTableName,OCTET,read-only,,current,,Name of the outlet.
.1.3.6.1.4.1.10418.16.2.5.5.1.5,ACS-MIB::acsPowerMgmtOutletsTableStatus,INTEGER,read-only,,current,off(1):on(2),Status of the outlet.
.1.3.6.1.4.1.10418.16.2.5.5.1.6,ACS-MIB::acsPowerMgmtOutletsTablePowerControl,INTEGER,read-write,,current,noAction(1):powerOn(2):powerOff(3):powerCycle(4):powerLock(5):powerUnlock(6),A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU. powerLock(5)= when SET the power lock command is sent to PDU. powerUnlock(6)=when SET the power unlock command is sent to PDU. The powerLock and powerUnlock are valid only for Cyclades-PM PDUs
.1.3.6.1.4.1.10418.16.2.5.5.1.7,ACS-MIB::acsPowerMgmtOutletsTablePortName,OCTET,read-only,,current,,Serial Port Name where the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.5.1.8,ACS-MIB::acsPowerMgmtOutletsTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.16.2.5.6,ACS-MIB::acsPowerMgmtNumberOfOutletGroup,Integer32,read-only,,current,,Number of configured group of outlets.
.1.3.6.1.4.1.10418.16.2.5.7,ACS-MIB::acsPowerMgmtGroupTable,,not-accessible,,current,,This table contains the information about group of outlets.
.1.3.6.1.4.1.10418.16.2.5.7.1,ACS-MIB::acsPowerMgmtGroupTableEntry,,not-accessible,acsPowerMgmtGroupTableIndex,current,,each entry has the information about group of outlets.
.1.3.6.1.4.1.10418.16.2.5.7.1.1,ACS-MIB::acsPowerMgmtGroupTableIndex,Integer32,read-only,,current,,Index of the group.
.1.3.6.1.4.1.10418.16.2.5.7.1.2,ACS-MIB::acsPowerMgmtGroupTableName,OCTET,read-only,,current,,Name of the group of outlets.
.1.3.6.1.4.1.10418.16.2.5.7.1.3,ACS-MIB::acsPowerMgmtGroupTableStatus,INTEGER,read-only,,current,off(1):on(2),Status of the group of outlet.
.1.3.6.1.4.1.10418.16.2.5.7.1.4,ACS-MIB::acsPowerMgmtGroupTablePowerControl,INTEGER,read-write,,current,noAction(1):powerOn(2):powerOff(3):powerCycle(4),A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU.
.1.3.6.1.4.1.10418.16.2.5.8,ACS-MIB::acsPowerMgmtPhasesTable,,not-accessible,,current,,This table contains data monitoring of each detected phase.
.1.3.6.1.4.1.10418.16.2.5.8.1,ACS-MIB::acsPowerMgmtPhasesTableEntry,,not-accessible,acsPowerMgmtPhasesTablePortNumber:acsPowerMgmtPhasesTablePduIndex:acsPowerMgmtPhasesTablePhaseIndex,current,,each entry has the data monitoring about phases.
.1.3.6.1.4.1.10418.16.2.5.8.1.1,ACS-MIB::acsPowerMgmtPhasesTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.8.1.2,ACS-MIB::acsPowerMgmtPhasesTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.16.2.5.8.1.3,ACS-MIB::acsPowerMgmtPhasesTablePhaseIndex,Integer32,read-only,,current,,phase index in the PDU.
.1.3.6.1.4.1.10418.16.2.5.8.1.4,ACS-MIB::acsPowerMgmtPhasesTablePhaseName,OCTET,read-only,,current,,phase name in the PDU.
.1.3.6.1.4.1.10418.16.2.5.8.1.5,ACS-MIB::acsPowerMgmtPhasesTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.16.2.5.8.1.6,ACS-MIB::acsPowerMgmtPhasesTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.8.1.7,ACS-MIB::acsPowerMgmtPhasesTableCurrentValue,Integer32,read-only,,current,,Actual value of current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.8,ACS-MIB::acsPowerMgmtPhasesTableCurrentMax,Integer32,read-only,,current,,Max detected value of current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.9,ACS-MIB::acsPowerMgmtPhasesTableCurrentMin,Integer32,read-only,,current,,Min detected value of current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.10,ACS-MIB::acsPowerMgmtPhasesTableCurrentAvg,Integer32,read-only,,current,,Average value for current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.11,ACS-MIB::acsPowerMgmtPhasesTableCurrentReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of current.
.1.3.6.1.4.1.10418.16.2.5.8.1.12,ACS-MIB::acsPowerMgmtPhasesTableVoltageType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of voltage values.
.1.3.6.1.4.1.10418.16.2.5.8.1.13,ACS-MIB::acsPowerMgmtPhasesTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.16.2.5.8.1.14,ACS-MIB::acsPowerMgmtPhasesTableVoltageMax,Integer32,read-only,,current,,Max detected value of voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.16.2.5.8.1.15,ACS-MIB::acsPowerMgmtPhasesTableVoltageMin,Integer32,read-only,,current,,Min detected value of voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.16.2.5.8.1.16,ACS-MIB::acsPowerMgmtPhasesTableVoltageAvg,Integer32,read-only,,current,,Average value for voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.16.2.5.8.1.17,ACS-MIB::acsPowerMgmtPhasesTableVoltageReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of voltage.
.1.3.6.1.4.1.10418.16.2.5.8.1.18,ACS-MIB::acsPowerMgmtPhasesTablePowerType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power consumption values.
.1.3.6.1.4.1.10418.16.2.5.8.1.19,ACS-MIB::acsPowerMgmtPhasesTablePowerValue,Integer32,read-only,,current,,Actual value of power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.20,ACS-MIB::acsPowerMgmtPhasesTablePowerMax,Integer32,read-only,,current,,Max detected value of power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.21,ACS-MIB::acsPowerMgmtPhasesTablePowerMin,Integer32,read-only,,current,,Min detected value of power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.22,ACS-MIB::acsPowerMgmtPhasesTablePowerAvg,Integer32,read-only,,current,,Average value for power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.8.1.23,ACS-MIB::acsPowerMgmtPhasesTablePowerReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power consumption.
.1.3.6.1.4.1.10418.16.2.5.8.1.24,ACS-MIB::acsPowerMgmtPhasesTablePowerFactorType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power factor values.
.1.3.6.1.4.1.10418.16.2.5.8.1.25,ACS-MIB::acsPowerMgmtPhasesTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.8.1.26,ACS-MIB::acsPowerMgmtPhasesTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.8.1.27,ACS-MIB::acsPowerMgmtPhasesTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.8.1.28,ACS-MIB::acsPowerMgmtPhasesTablePowerFactorAvg,Integer32,read-only,,current,,Average value for power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.8.1.29,ACS-MIB::acsPowerMgmtPhasesTablePowerFactorReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power factor.
.1.3.6.1.4.1.10418.16.2.5.8.1.30,ACS-MIB::acsPowerMgmtPhasesTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the phase alarm status.
.1.3.6.1.4.1.10418.16.2.5.9,ACS-MIB::acsPowerMgmtBanksTable,,not-accessible,,current,,This table contains data monitoring of each detected bank.
.1.3.6.1.4.1.10418.16.2.5.9.1,ACS-MIB::acsPowerMgmtBanksTableEntry,,not-accessible,acsPowerMgmtBanksTablePortNumber:acsPowerMgmtBanksTablePduIndex:acsPowerMgmtBanksTableBankIndex,current,,each entry has the data monitoring about bank.
.1.3.6.1.4.1.10418.16.2.5.9.1.1,ACS-MIB::acsPowerMgmtBanksTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.9.1.2,ACS-MIB::acsPowerMgmtBanksTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.16.2.5.9.1.3,ACS-MIB::acsPowerMgmtBanksTableBankIndex,Integer32,read-only,,current,,Bank index in the PDU.
.1.3.6.1.4.1.10418.16.2.5.9.1.4,ACS-MIB::acsPowerMgmtBanksTableBankName,OCTET,read-only,,current,,Bank name in the PDU.
.1.3.6.1.4.1.10418.16.2.5.9.1.5,ACS-MIB::acsPowerMgmtBanksTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.16.2.5.9.1.6,ACS-MIB::acsPowerMgmtBanksTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.9.1.7,ACS-MIB::acsPowerMgmtBanksTableCurrentValue,Integer32,read-only,,current,,Actual value of current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.8,ACS-MIB::acsPowerMgmtBanksTableCurrentMax,Integer32,read-only,,current,,Max detected value of current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.9,ACS-MIB::acsPowerMgmtBanksTableCurrentMin,Integer32,read-only,,current,,Min detected value of current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.10,ACS-MIB::acsPowerMgmtBanksTableCurrentAvg,Integer32,read-only,,current,,Average value for current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.11,ACS-MIB::acsPowerMgmtBanksTableCurrentReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of current.
.1.3.6.1.4.1.10418.16.2.5.9.1.12,ACS-MIB::acsPowerMgmtBanksTableVoltageType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of voltage values.
.1.3.6.1.4.1.10418.16.2.5.9.1.13,ACS-MIB::acsPowerMgmtBanksTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.16.2.5.9.1.14,ACS-MIB::acsPowerMgmtBanksTableVoltageMax,Integer32,read-only,,current,,Max detected value of voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.16.2.5.9.1.15,ACS-MIB::acsPowerMgmtBanksTableVoltageMin,Integer32,read-only,,current,,Min detected value of voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.16.2.5.9.1.16,ACS-MIB::acsPowerMgmtBanksTableVoltageAvg,Integer32,read-only,,current,,Average value for voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.16.2.5.9.1.17,ACS-MIB::acsPowerMgmtBanksTableVoltageReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of voltage.
.1.3.6.1.4.1.10418.16.2.5.9.1.18,ACS-MIB::acsPowerMgmtBanksTablePowerType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power consumption values.
.1.3.6.1.4.1.10418.16.2.5.9.1.19,ACS-MIB::acsPowerMgmtBanksTablePowerValue,Integer32,read-only,,current,,Actual value of power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.20,ACS-MIB::acsPowerMgmtBanksTablePowerMax,Integer32,read-only,,current,,Max detected value of power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.21,ACS-MIB::acsPowerMgmtBanksTablePowerMin,Integer32,read-only,,current,,Min detected value of power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.22,ACS-MIB::acsPowerMgmtBanksTablePowerAvg,Integer32,read-only,,current,,Average value for power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.9.1.23,ACS-MIB::acsPowerMgmtBanksTablePowerReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power consumption.
.1.3.6.1.4.1.10418.16.2.5.9.1.24,ACS-MIB::acsPowerMgmtBanksTablePowerFactorType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power factor values.
.1.3.6.1.4.1.10418.16.2.5.9.1.25,ACS-MIB::acsPowerMgmtBanksTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.9.1.26,ACS-MIB::acsPowerMgmtBanksTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.9.1.27,ACS-MIB::acsPowerMgmtBanksTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.9.1.28,ACS-MIB::acsPowerMgmtBanksTablePowerFactorAvg,Integer32,read-only,,current,,Average value for power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.9.1.29,ACS-MIB::acsPowerMgmtBanksTablePowerFactorReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power factor.
.1.3.6.1.4.1.10418.16.2.5.9.1.30,ACS-MIB::acsPowerMgmtBanksTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the bank alarm status.
.1.3.6.1.4.1.10418.16.2.5.10,ACS-MIB::acsPowerMgmtEnvMonTable,,not-accessible,,current,,This table contains data monitoring of each detected environmental sensor.
.1.3.6.1.4.1.10418.16.2.5.10.1,ACS-MIB::acsPowerMgmtEnvMonTableEntry,,not-accessible,acsPowerMgmtEnvMonTablePortNumber:acsPowerMgmtEnvMonTablePduIndex:acsPowerMgmtEnvMonTableIndex,current,,each entry has the data monitoring about environmental sensors.
.1.3.6.1.4.1.10418.16.2.5.10.1.1,ACS-MIB::acsPowerMgmtEnvMonTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.10.1.2,ACS-MIB::acsPowerMgmtEnvMonTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.16.2.5.10.1.3,ACS-MIB::acsPowerMgmtEnvMonTableIndex,Integer32,read-only,,current,,envmon sensor index.
.1.3.6.1.4.1.10418.16.2.5.10.1.4,ACS-MIB::acsPowerMgmtEnvMonTableName,OCTET,read-only,,current,,envmon sensor name.
.1.3.6.1.4.1.10418.16.2.5.10.1.5,ACS-MIB::acsPowerMgmtEnvMonTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.16.2.5.10.1.6,ACS-MIB::acsPowerMgmtEnvMonTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.16.2.5.10.1.7,ACS-MIB::acsPowerMgmtEnvMonTableType,INTEGER,read-only,,current,temp-internal(1):temperature(2):humidity(3):air-flow(4):smoke(5):dry-concact(6):water-level(7):motion(8):unplugged(9):unknown(10),The type of environmental monitor.
.1.3.6.1.4.1.10418.16.2.5.10.1.8,ACS-MIB::acsPowerMgmtEnvMonTableStatus,INTEGER,read-only,,current,normal(1):triggered(2):not-applicable(3),Status of digital sensors:
.1.3.6.1.4.1.10418.16.2.5.10.1.9,ACS-MIB::acsPowerMgmtEnvMonTableValue,Integer32,read-only,,current,,Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
.1.3.6.1.4.1.10418.16.2.5.10.1.10,ACS-MIB::acsPowerMgmtEnvMonTableMaxValue,Integer32,read-only,,current,,Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
.1.3.6.1.4.1.10418.16.2.5.11,ACS-MIB::acsPowerMgmtOutElecMonTable,,not-accessible,,current,,This table contains the information about data monitoring of outlets.
.1.3.6.1.4.1.10418.16.2.5.11.1,ACS-MIB::acsPowerMgmtOutElecMonTableEntry,,not-accessible,acsPowerMgmtOutElecMonTablePortNumber:acsPowerMgmtOutElecMonTablePduNumber:acsPowerMgmtOutElecMonTableNumber,current,,each entry has the information about the outlet.
.1.3.6.1.4.1.10418.16.2.5.11.1.1,ACS-MIB::acsPowerMgmtOutElecMonTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.16.2.5.11.1.2,ACS-MIB::acsPowerMgmtOutElecMonTablePduNumber,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.16.2.5.11.1.3,ACS-MIB::acsPowerMgmtOutElecMonTableNumber,Integer32,read-only,,current,,Number of the outlet in the PDU.
.1.3.6.1.4.1.10418.16.2.5.11.1.4,ACS-MIB::acsPowerMgmtOutElecMonTableCurrentValue,Integer32,read-only,,current,,Actual value of outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.5,ACS-MIB::acsPowerMgmtOutElecMonTableCurrentMax,Integer32,read-only,,current,,Max detected value of outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.6,ACS-MIB::acsPowerMgmtOutElecMonTableCurrentMin,Integer32,read-only,,current,,Min detected value of outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.7,ACS-MIB::acsPowerMgmtOutElecMonTableCurrentAvg,Integer32,read-only,,current,,Average value for outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.8,ACS-MIB::acsPowerMgmtOutElecMonTableCurrentReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet current.
.1.3.6.1.4.1.10418.16.2.5.11.1.9,ACS-MIB::acsPowerMgmtOutElecMonTablePowerValue,Integer32,read-only,,current,,Actual value of outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.10,ACS-MIB::acsPowerMgmtOutElecMonTablePowerMax,Integer32,read-only,,current,,Max detected value of outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.11,ACS-MIB::acsPowerMgmtOutElecMonTablePowerMin,Integer32,read-only,,current,,Min detected value of outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.12,ACS-MIB::acsPowerMgmtOutElecMonTablePowerAvg,Integer32,read-only,,current,,Average value for outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.16.2.5.11.1.13,ACS-MIB::acsPowerMgmtOutElecMonTablePowerReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet power comsumption.
.1.3.6.1.4.1.10418.16.2.5.11.1.14,ACS-MIB::acsPowerMgmtOutElecMonTableVoltageValue,Integer32,read-only,,current,,Actual value of outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.16.2.5.11.1.15,ACS-MIB::acsPowerMgmtOutElecMonTableVoltageMax,Integer32,read-only,,current,,Max detected value of outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.16.2.5.11.1.16,ACS-MIB::acsPowerMgmtOutElecMonTableVoltageMin,Integer32,read-only,,current,,Min detected value of outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.16.2.5.11.1.17,ACS-MIB::acsPowerMgmtOutElecMonTableVoltageAvg,Integer32,read-only,,current,,Average value for outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.16.2.5.11.1.18,ACS-MIB::acsPowerMgmtOutElecMonTableVoltageReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet voltage.
.1.3.6.1.4.1.10418.16.2.5.11.1.19,ACS-MIB::acsPowerMgmtOutElecMonTablePowerFactorValue,Integer32,read-only,,current,,Actual value of outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.11.1.20,ACS-MIB::acsPowerMgmtOutElecMonTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.11.1.21,ACS-MIB::acsPowerMgmtOutElecMonTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.11.1.22,ACS-MIB::acsPowerMgmtOutElecMonTablePowerFactorAvg,Integer32,read-only,,current,,Average value for outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.16.2.5.11.1.23,ACS-MIB::acsPowerMgmtOutElecMonTablePowerFactorReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet power-factor.
.1.3.6.1.4.1.10418.16.2.5.11.1.24,ACS-MIB::acsPowerMgmtOutElecMonTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the outlet alarm status.
.1.3.6.1.4.1.10418.16.2.6,ACS-MIB::acsTrapObject,,,,,,
.1.3.6.1.4.1.10418.26,ACS8000-MIB::acs,,,,,,This module defines the MIB extensions to ACS80xx products.
.1.3.6.1.4.1.10418.26.1,ACS8000-MIB::acsProducts,,,,,,
.1.3.6.1.4.1.10418.26.1.1,ACS8000-MIB::acs8048,,,,,,
.1.3.6.1.4.1.10418.26.1.2,ACS8000-MIB::acs8032,,,,,,
.1.3.6.1.4.1.10418.26.1.3,ACS8000-MIB::acs8016,,,,,,
.1.3.6.1.4.1.10418.26.1.4,ACS8000-MIB::acs8008,,,,,,
.1.3.6.1.4.1.10418.26.1.5,ACS8000-MIB::acs808,,,,,,
.1.3.6.1.4.1.10418.26.1.6,ACS8000-MIB::acs804,,,,,,
.1.3.6.1.4.1.10418.26.1.7,ACS8000-MIB::acs802,,,,,,
.1.3.6.1.4.1.10418.26.2,ACS8000-MIB::acsManagement,,,,,,
.1.3.6.1.4.1.10418.26.2.1,ACS8000-MIB::acsAppliance,,,,,,
.1.3.6.1.4.1.10418.26.2.1.1,ACS8000-MIB::acsHostName,OCTET,read-only,,current,,The appliance name
.1.3.6.1.4.1.10418.26.2.1.2,ACS8000-MIB::acsProductModel,OCTET,read-only,,current,,The appliance product model
.1.3.6.1.4.1.10418.26.2.1.3,ACS8000-MIB::acsPartNumber,OCTET,read-only,,current,,The part number of this appliance as shown on the label attached or imprinted on the appliance.
.1.3.6.1.4.1.10418.26.2.1.4,ACS8000-MIB::acsSerialNumber,OCTET,read-only,,current,,The serial number of this appliance as shown on the label attached or imprinted on the appliance.
.1.3.6.1.4.1.10418.26.2.1.5,ACS8000-MIB::acsEIDNumber,OCTET,read-only,,current,,The electronic ID number (EID) of this appliance as shown on the label attached or imprinted on the appliance.
.1.3.6.1.4.1.10418.26.2.1.6,ACS8000-MIB::acsBootcodeVersion,OCTET,read-only,,current,,The version of the bootcode of this appliance.
.1.3.6.1.4.1.10418.26.2.1.7,ACS8000-MIB::acsFirmwareVersion,OCTET,read-only,,current,,The version of the firmware of this appliance.
.1.3.6.1.4.1.10418.26.2.1.8,ACS8000-MIB::acsPowerSupply,,,,,,It gives information about Power Supply of this appliance
.1.3.6.1.4.1.10418.26.2.1.8.1,ACS8000-MIB::acsPowerSupplyNumber,Integer32,read-only,,current,,Number of the power supplies of this appliance
.1.3.6.1.4.1.10418.26.2.1.8.2,ACS8000-MIB::acsPowerSupplyStatePw1,INTEGER,read-only,,current,statePowerOn(1):statePowerOff(2):powerNotInstaled(9999),State of the first power supply
.1.3.6.1.4.1.10418.26.2.1.8.3,ACS8000-MIB::acsPowerSupplyStatePw2,INTEGER,read-only,,current,statePowerOn(1):statePowerOff(2):powerNotInstaled(9999),State of the second power supply
.1.3.6.1.4.1.10418.26.2.1.9,ACS8000-MIB::acsReboot,INTEGER,read-write,,current,noAction(1):reboot(2),A set value of reboot(2) will reboot the appliance. noAction(1) = always returned in a GET. Does nothing if SET. reboot(2) = when SET the appliance immediately reboots.
.1.3.6.1.4.1.10418.26.2.2,ACS8000-MIB::acsSessions,,,,,,
.1.3.6.1.4.1.10418.26.2.2.1,ACS8000-MIB::acsActiveSessionsNumberOfSession,Integer32,read-only,,current,,Number of active sessions.
.1.3.6.1.4.1.10418.26.2.2.2,ACS8000-MIB::acsActiveSessionsTable,,not-accessible,,current,,This table contains the list of active sessions.
.1.3.6.1.4.1.10418.26.2.2.2.1,ACS8000-MIB::acsActiveSessionsTableEntry,,not-accessible,acsActiveSessionsTableIndex,current,,each entry has the information about the active session
.1.3.6.1.4.1.10418.26.2.2.2.1.1,ACS8000-MIB::acsActiveSessionsTableIndex,Integer32,read-only,,current,,A unique index representing an entry in this table.
.1.3.6.1.4.1.10418.26.2.2.2.1.2,ACS8000-MIB::acsActiveSessionsTableUser,OCTET,read-only,,current,,The name of the user that opens this session.
.1.3.6.1.4.1.10418.26.2.2.2.1.3,ACS8000-MIB::acsActiveSessionsTableGroup,OCTET,read-only,,current,,The name of the group that the user belongs to.
.1.3.6.1.4.1.10418.26.2.2.2.1.4,ACS8000-MIB::acsActiveSessionsTableType,OCTET,read-only,,current,,The session type.
.1.3.6.1.4.1.10418.26.2.2.2.1.5,ACS8000-MIB::acsActiveSessionsTableConnection,OCTET,read-only,,current,,Connection type.
.1.3.6.1.4.1.10418.26.2.2.2.1.6,ACS8000-MIB::acsActiveSessionsTableSessionTime,OCTET,read-only,,current,,Time of the session
.1.3.6.1.4.1.10418.26.2.2.2.1.7,ACS8000-MIB::acsActiveSessionsTableFrom,OCTET,read-only,,current,,The source IP address of the session.
.1.3.6.1.4.1.10418.26.2.2.2.1.8,ACS8000-MIB::acsActiveSessionsTableKill,INTEGER,read-write,,current,noAction(1):killSession(2),A set value of killSession(2) will kill the session. noAction(1) = always returned in a GET. Does nothing if SET. killSession(2)= when SET the appliance immediately kills the session.
.1.3.6.1.4.1.10418.26.2.3,ACS8000-MIB::acsSerialPort,,,,,,
.1.3.6.1.4.1.10418.26.2.3.1,ACS8000-MIB::acsSerialPortNumberOfPorts,Integer32,read-only,,current,,Number of Serial Ports (physical serial port plus Aux Port.
.1.3.6.1.4.1.10418.26.2.3.2,ACS8000-MIB::acsSerialPortTable,,not-accessible,,current,,This table contains information about serial ports.
.1.3.6.1.4.1.10418.26.2.3.2.1,ACS8000-MIB::acsSerialPortTableEntry,,not-accessible,acsSerialPortTableNumber,current,,each entry has the information about specific serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.1,ACS8000-MIB::acsSerialPortTableNumber,Integer32,read-only,,current,,A unique index representing an entry in this table. It is the number of the serial port. For AUX port, the number will be the number of physical serial ports plus 1.
.1.3.6.1.4.1.10418.26.2.3.2.1.2,ACS8000-MIB::acsSerialPortTableDeviceName,OCTET,read-only,,current,,The associated device name for the serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.3,ACS8000-MIB::acsSerialPortTableStatus,INTEGER,read-only,,current,disabled(1):idle(2):inUse(3),The status of the serial port: disabled(1) = it was configured as disable. idle(2) = there is not any session opened in this port. inUse(3) = there is session(s) opened in this port.
.1.3.6.1.4.1.10418.26.2.3.2.1.4,ACS8000-MIB::acsSerialPortTableName,OCTET,read-only,,current,,Name associated with this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.5,ACS8000-MIB::acsSerialPortTableProfile,INTEGER,read-only,,current,casProfile(1):tsProfile(2):dialInProfile(3):powerProfile(4),Configured profile for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.6,ACS8000-MIB::acsSerialPortTablePinOut,INTEGER,read-only,,current,cyclades(1):cisco(2):rs422(3):rs485(4):auto(5),RJ45 Pin-out configured for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.7,ACS8000-MIB::acsSerialPortTableComSpeed,INTEGER,read-only,,current,speed300bps(300):speed600bps(600):speed1200bps(1200):speed2400bps(2400):speed4800bps(4800):speed9600bps(9600):speed19200bps(19200):speed38400bps(38400):speed57600bps(57600):speed115200bps(115200):speed230400bps(230400):speed460800bps(460800),Speed configured for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.8,ACS8000-MIB::acsSerialPortTableComParity,INTEGER,read-only,,current,none(1):odd(2):even(3),Parity configured for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.9,ACS8000-MIB::acsSerialPortTableComDataSize,Integer32,read-only,,current,,Data Size configured for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.10,ACS8000-MIB::acsSerialPortTableComStopBits,Integer32,read-only,,current,,Number of Stop Bits configured for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.11,ACS8000-MIB::acsSerialPortTableComFlowControl,INTEGER,read-only,,current,none(1):hardware(2):software(3),Flow Control configured for this serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.12,ACS8000-MIB::acsSerialPortTableSignalStateDTR,INTEGER,read-only,,current,up(1):down(2),State of the DTR RS-232C signal.
.1.3.6.1.4.1.10418.26.2.3.2.1.13,ACS8000-MIB::acsSerialPortTableSignalStateDCD,INTEGER,read-only,,current,up(1):down(2),State of the DCD RS-232C signal.
.1.3.6.1.4.1.10418.26.2.3.2.1.14,ACS8000-MIB::acsSerialPortTableSignalStateRTS,INTEGER,read-only,,current,up(1):down(2),State of the RTS RS-232C signal.
.1.3.6.1.4.1.10418.26.2.3.2.1.15,ACS8000-MIB::acsSerialPortTableSignalStateCTS,INTEGER,read-only,,current,up(1):down(2),State of the CTS RS-232C signal.
.1.3.6.1.4.1.10418.26.2.3.2.1.16,ACS8000-MIB::acsSerialPortTableTxBytes,Integer32,read-only,,current,,The number of transmited bytes by the serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.17,ACS8000-MIB::acsSerialPortTableRxBytes,Integer32,read-only,,current,,The number of received bytes by the serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.18,ACS8000-MIB::acsSerialPortTableFrameError,Integer32,read-only,,current,,The number of frame error detected in the serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.19,ACS8000-MIB::acsSerialPortTableParityError,Integer32,read-only,,current,,The number of parity error detected in the serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.20,ACS8000-MIB::acsSerialPortTableBreak,Integer32,read-only,,current,,The number of break detected in the serial port.
.1.3.6.1.4.1.10418.26.2.3.2.1.21,ACS8000-MIB::acsSerialPortTableOverrun,Integer32,read-only,,current,,The number of overrun error detected in the serial port.
.1.3.6.1.4.1.10418.26.2.5,ACS8000-MIB::acsPowerMgmt,,,,,,
.1.3.6.1.4.1.10418.26.2.5.1,ACS8000-MIB::acsPowerMgmtNumSerialPorts,Integer32,read-only,,current,,The number of Serial Ports that has PDU connected on the appliance.
.1.3.6.1.4.1.10418.26.2.5.2,ACS8000-MIB::acsPowerMgmtSerialTable,,not-accessible,,current,,Information about each serial port thas has PDU connect.
.1.3.6.1.4.1.10418.26.2.5.2.1,ACS8000-MIB::acsPowerMgmtSerialTableEntry,,not-accessible,acsPowerMgmtSerialTableIndex,current,,Information about each serial port thas has PDU connect.
.1.3.6.1.4.1.10418.26.2.5.2.1.1,ACS8000-MIB::acsPowerMgmtSerialTableIndex,Integer32,read-only,,current,,The index of the register.
.1.3.6.1.4.1.10418.26.2.5.2.1.2,ACS8000-MIB::acsPowerMgmtSerialTablePortNumber,Integer32,read-only,,current,,The number of the serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.2.1.3,ACS8000-MIB::acsPowerMgmtSerialTableDeviceName,OCTET,read-only,,current,,The device name of this serial port.
.1.3.6.1.4.1.10418.26.2.5.2.1.4,ACS8000-MIB::acsPowerMgmtSerialTableNumberPDUs,Integer32,read-only,,current,,Total number of units connected in this serial port.
.1.3.6.1.4.1.10418.26.2.5.2.1.5,ACS8000-MIB::acsPowerMgmtSerialTableNumberUPS,Integer32,read-only,,current,,Total number of UPS devices connected to this serial port.
.1.3.6.1.4.1.10418.26.2.5.3,ACS8000-MIB::acsPowerMgmtPDUTable,,not-accessible,,current,,This table contains the list of detected PDUs.
.1.3.6.1.4.1.10418.26.2.5.3.1,ACS8000-MIB::acsPowerMgmtPDUTableEntry,,not-accessible,acsPowerMgmtPDUTablePortNumber:acsPowerMgmtPDUTablePduIndex,current,,each entry has the information about the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.1,ACS8000-MIB::acsPowerMgmtPDUTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.3.1.2,ACS8000-MIB::acsPowerMgmtPDUTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.26.2.5.3.1.3,ACS8000-MIB::acsPowerMgmtPDUTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.26.2.5.3.1.4,ACS8000-MIB::acsPowerMgmtPDUTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.3.1.5,ACS8000-MIB::acsPowerMgmtPDUTableModel,OCTET,read-only,,current,,Model of the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.6,ACS8000-MIB::acsPowerMgmtPDUTableVendor,OCTET,read-only,,current,,Vendor of the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.7,ACS8000-MIB::acsPowerMgmtPDUTableFirmwareVersion,OCTET,read-only,,current,,Version of the PDU firmware.
.1.3.6.1.4.1.10418.26.2.5.3.1.8,ACS8000-MIB::acsPowerMgmtPDUTableNumberOfOutlets,Integer32,read-only,,current,,Number of outlets of the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.9,ACS8000-MIB::acsPowerMgmtPDUTableCurrentNOS,Integer32,read-only,,obsolete,,Number of current sensors in the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.10,ACS8000-MIB::acsPowerMgmtPDUTableCurrent1Value,Integer32,read-only,,obsolete,,Current of the sensor 1 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.10418.26.2.5.3.1.11,ACS8000-MIB::acsPowerMgmtPDUTableCurrent1Max,Integer32,read-write,,obsolete,,Maximum current of the sensor 1 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
.1.3.6.1.4.1.10418.26.2.5.3.1.12,ACS8000-MIB::acsPowerMgmtPDUTableCurrent2Value,Integer32,read-only,,obsolete,,Current of the sensor 2 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.10418.26.2.5.3.1.13,ACS8000-MIB::acsPowerMgmtPDUTableCurrent2Max,Integer32,read-write,,obsolete,,Maximum current of the sensor 2 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
.1.3.6.1.4.1.10418.26.2.5.3.1.14,ACS8000-MIB::acsPowerMgmtPDUTableCurrent3Value,Integer32,read-only,,obsolete,,Current of the sensor 3 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.)
.1.3.6.1.4.1.10418.26.2.5.3.1.15,ACS8000-MIB::acsPowerMgmtPDUTableCurrent3Max,Integer32,read-write,,obsolete,,Maximum current of the sensor 3 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value.
.1.3.6.1.4.1.10418.26.2.5.3.1.16,ACS8000-MIB::acsPowerMgmtPDUTableTemperatureNOS,Integer32,read-only,,obsolete,,Number of temperature sensors in the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.17,ACS8000-MIB::acsPowerMgmtPDUTableTemperature1Value,Integer32,read-only,,obsolete,,Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.10418.26.2.5.3.1.18,ACS8000-MIB::acsPowerMgmtPDUTableTemperature1Max,Integer32,read-write,,obsolete,,Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.26.2.5.3.1.19,ACS8000-MIB::acsPowerMgmtPDUTableTemperature2Value,Integer32,read-only,,obsolete,,Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.10418.26.2.5.3.1.20,ACS8000-MIB::acsPowerMgmtPDUTableTemperature2Max,Integer32,read-write,,obsolete,,Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.26.2.5.3.1.21,ACS8000-MIB::acsPowerMgmtPDUTableTemperature3Value,Integer32,read-only,,obsolete,,Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius).
.1.3.6.1.4.1.10418.26.2.5.3.1.22,ACS8000-MIB::acsPowerMgmtPDUTableTemperature3Max,Integer32,read-write,,obsolete,,Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.26.2.5.3.1.23,ACS8000-MIB::acsPowerMgmtPDUTableHumidityNOS,Integer32,read-only,,obsolete,,Number of humidity sensors in the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.24,ACS8000-MIB::acsPowerMgmtPDUTableHumidity1Value,Integer32,read-only,,obsolete,,Humidity of this PM unit . If the humidity measurement is not installed this value will be 0.
.1.3.6.1.4.1.10418.26.2.5.3.1.25,ACS8000-MIB::acsPowerMgmtPDUTableHumidity1Max,Integer32,read-write,,obsolete,,Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.26.2.5.3.1.26,ACS8000-MIB::acsPowerMgmtPDUTableHumidity2Value,Integer32,read-only,,obsolete,,Humidity of this PM unit . If the humidity measurement is not installed this value will be 0.
.1.3.6.1.4.1.10418.26.2.5.3.1.27,ACS8000-MIB::acsPowerMgmtPDUTableHumidity2Max,Integer32,read-write,,obsolete,,Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.26.2.5.3.1.28,ACS8000-MIB::acsPowerMgmtPDUTableHumidity3Value,Integer32,read-only,,obsolete,,Humidity of this PM unit . If the humidity measurement is not installed this value will be 0.
.1.3.6.1.4.1.10418.26.2.5.3.1.29,ACS8000-MIB::acsPowerMgmtPDUTableHumidity3Max,Integer32,read-write,,obsolete,,Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature.
.1.3.6.1.4.1.10418.26.2.5.3.1.30,ACS8000-MIB::acsPowerMgmtPDUTableVoltageNOS,Integer32,read-only,,obsolete,,Number of voltage sensors in the PDU.
.1.3.6.1.4.1.10418.26.2.5.3.1.31,ACS8000-MIB::acsPowerMgmtPDUTableVoltage1Value,Integer32,read-only,,obsolete,,Voltage of this sensor in this PDU unit.
.1.3.6.1.4.1.10418.26.2.5.3.1.32,ACS8000-MIB::acsPowerMgmtPDUTableVoltage1Max,Integer32,read-write,,obsolete,,Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
.1.3.6.1.4.1.10418.26.2.5.3.1.33,ACS8000-MIB::acsPowerMgmtPDUTableVoltage2Value,Integer32,read-only,,obsolete,,Voltage of this sensor in this PDU unit.
.1.3.6.1.4.1.10418.26.2.5.3.1.34,ACS8000-MIB::acsPowerMgmtPDUTableVoltage2Max,Integer32,read-write,,obsolete,,Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
.1.3.6.1.4.1.10418.26.2.5.3.1.35,ACS8000-MIB::acsPowerMgmtPDUTableVoltage3Value,Integer32,read-only,,obsolete,,Voltage of this sensor in this PDU unit.
.1.3.6.1.4.1.10418.26.2.5.3.1.36,ACS8000-MIB::acsPowerMgmtPDUTableVoltage3Max,Integer32,read-write,,obsolete,,Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage.
.1.3.6.1.4.1.10418.26.2.5.3.1.37,ACS8000-MIB::acsPowerMgmtPDUTableNumberOfPhases,INTEGER,read-only,,current,single-phase(0):three-phase(3),Number of phases of this PDU unit.
.1.3.6.1.4.1.10418.26.2.5.3.1.38,ACS8000-MIB::acsPowerMgmtPDUTableNumberOfBanks,Integer32,read-only,,current,,Number of banks of this PDU unit.
.1.3.6.1.4.1.10418.26.2.5.3.1.39,ACS8000-MIB::acsPowerMgmtPDUTableCurrentValue,Integer32,read-only,,current,,Actual value of current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.40,ACS8000-MIB::acsPowerMgmtPDUTableCurrentMax,Integer32,read-only,,current,,Max detected value of current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.41,ACS8000-MIB::acsPowerMgmtPDUTableCurrentMin,Integer32,read-only,,current,,Min detected value of current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.42,ACS8000-MIB::acsPowerMgmtPDUTableCurrentAvg,Integer32,read-only,,current,,Average value for current sensor in this PDU.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.43,ACS8000-MIB::acsPowerMgmtPDUTableCurrentReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of current.
.1.3.6.1.4.1.10418.26.2.5.3.1.44,ACS8000-MIB::acsPowerMgmtPDUTableVoltageType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of voltage values.
.1.3.6.1.4.1.10418.26.2.5.3.1.45,ACS8000-MIB::acsPowerMgmtPDUTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.26.2.5.3.1.46,ACS8000-MIB::acsPowerMgmtPDUTableVoltageMax,Integer32,read-only,,current,,Max detected value of voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.26.2.5.3.1.47,ACS8000-MIB::acsPowerMgmtPDUTableVoltageMin,Integer32,read-only,,current,,Min detected value of voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.26.2.5.3.1.48,ACS8000-MIB::acsPowerMgmtPDUTableVoltageAvg,Integer32,read-only,,current,,Average value for voltage sensor in this PDU unit.( V )
.1.3.6.1.4.1.10418.26.2.5.3.1.49,ACS8000-MIB::acsPowerMgmtPDUTableVoltageReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of voltage.
.1.3.6.1.4.1.10418.26.2.5.3.1.50,ACS8000-MIB::acsPowerMgmtPDUTablePowerType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power consumption values.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.51,ACS8000-MIB::acsPowerMgmtPDUTablePowerValue,Integer32,read-only,,current,,Actual value of power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.52,ACS8000-MIB::acsPowerMgmtPDUTablePowerMax,Integer32,read-only,,current,,Max detected value of power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.53,ACS8000-MIB::acsPowerMgmtPDUTablePowerMin,Integer32,read-only,,current,,Min detected value of power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.54,ACS8000-MIB::acsPowerMgmtPDUTablePowerAvg,Integer32,read-only,,current,,Average value for power consumption in this PDU unit.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.3.1.55,ACS8000-MIB::acsPowerMgmtPDUTablePowerReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power consumption.
.1.3.6.1.4.1.10418.26.2.5.3.1.56,ACS8000-MIB::acsPowerMgmtPDUTablePowerFactorType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power factor values.
.1.3.6.1.4.1.10418.26.2.5.3.1.57,ACS8000-MIB::acsPowerMgmtPDUTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.3.1.58,ACS8000-MIB::acsPowerMgmtPDUTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.3.1.59,ACS8000-MIB::acsPowerMgmtPDUTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.3.1.60,ACS8000-MIB::acsPowerMgmtPDUTablePowerFactorAvg,Integer32,read-only,,current,,Average value for power factor in this PDU unit.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.3.1.61,ACS8000-MIB::acsPowerMgmtPDUTablePowerFactorReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power factor.
.1.3.6.1.4.1.10418.26.2.5.3.1.62,ACS8000-MIB::acsPowerMgmtPDUTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the PDU alarm status.
.1.3.6.1.4.1.10418.26.2.5.3.1.63,ACS8000-MIB::acsPowerMgmtPDUTableEnvSensors,Integer32,read-only,,current,,Number of environmental sensor in this PDU.
.1.3.6.1.4.1.10418.26.2.5.4,ACS8000-MIB::acsPowerMgmtTotalNumberOfOutlets,Integer32,read-only,,current,,Number of outlets managed by the appliance.
.1.3.6.1.4.1.10418.26.2.5.5,ACS8000-MIB::acsPowerMgmtOutletsTable,,not-accessible,,current,,This table contains the information about outlets.
.1.3.6.1.4.1.10418.26.2.5.5.1,ACS8000-MIB::acsPowerMgmtOutletsTableEntry,,not-accessible,acsPowerMgmtOutletsTablePortNumber:acsPowerMgmtOutletsTablePduNumber:acsPowerMgmtOutletsTableNumber,current,,each entry has the information about the outlet.
.1.3.6.1.4.1.10418.26.2.5.5.1.1,ACS8000-MIB::acsPowerMgmtOutletsTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.5.1.2,ACS8000-MIB::acsPowerMgmtOutletsTablePduNumber,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.5.1.3,ACS8000-MIB::acsPowerMgmtOutletsTableNumber,Integer32,read-only,,current,,Number of the outlet in the PDU.
.1.3.6.1.4.1.10418.26.2.5.5.1.4,ACS8000-MIB::acsPowerMgmtOutletsTableName,OCTET,read-only,,current,,Name of the outlet.
.1.3.6.1.4.1.10418.26.2.5.5.1.5,ACS8000-MIB::acsPowerMgmtOutletsTableStatus,INTEGER,read-only,,current,off(1):on(2),Status of the outlet.
.1.3.6.1.4.1.10418.26.2.5.5.1.6,ACS8000-MIB::acsPowerMgmtOutletsTablePowerControl,INTEGER,read-write,,current,noAction(1):powerOn(2):powerOff(3):powerCycle(4):powerLock(5):powerUnlock(6),A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU. powerLock(5)= when SET the power lock command is sent to PDU. powerUnlock(6)=when SET the power unlock command is sent to PDU. The powerLock and powerUnlock are valid only for Cyclades-PM PDUs
.1.3.6.1.4.1.10418.26.2.5.5.1.7,ACS8000-MIB::acsPowerMgmtOutletsTablePortName,OCTET,read-only,,current,,Serial Port Name where the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.5.1.8,ACS8000-MIB::acsPowerMgmtOutletsTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.26.2.5.6,ACS8000-MIB::acsPowerMgmtNumberOfOutletGroup,Integer32,read-only,,current,,Number of configured group of outlets.
.1.3.6.1.4.1.10418.26.2.5.7,ACS8000-MIB::acsPowerMgmtGroupTable,,not-accessible,,current,,This table contains the information about group of outlets.
.1.3.6.1.4.1.10418.26.2.5.7.1,ACS8000-MIB::acsPowerMgmtGroupTableEntry,,not-accessible,acsPowerMgmtGroupTableIndex,current,,each entry has the information about group of outlets.
.1.3.6.1.4.1.10418.26.2.5.7.1.1,ACS8000-MIB::acsPowerMgmtGroupTableIndex,Integer32,read-only,,current,,Index of the group.
.1.3.6.1.4.1.10418.26.2.5.7.1.2,ACS8000-MIB::acsPowerMgmtGroupTableName,OCTET,read-only,,current,,Name of the group of outlets.
.1.3.6.1.4.1.10418.26.2.5.7.1.3,ACS8000-MIB::acsPowerMgmtGroupTableStatus,INTEGER,read-only,,current,off(1):on(2),Status of the group of outlet.
.1.3.6.1.4.1.10418.26.2.5.7.1.4,ACS8000-MIB::acsPowerMgmtGroupTablePowerControl,INTEGER,read-write,,current,noAction(1):powerOn(2):powerOff(3):powerCycle(4),A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU.
.1.3.6.1.4.1.10418.26.2.5.8,ACS8000-MIB::acsPowerMgmtPhasesTable,,not-accessible,,current,,This table contains data monitoring of each detected phase.
.1.3.6.1.4.1.10418.26.2.5.8.1,ACS8000-MIB::acsPowerMgmtPhasesTableEntry,,not-accessible,acsPowerMgmtPhasesTablePortNumber:acsPowerMgmtPhasesTablePduIndex:acsPowerMgmtPhasesTablePhaseIndex,current,,each entry has the data monitoring about phases.
.1.3.6.1.4.1.10418.26.2.5.8.1.1,ACS8000-MIB::acsPowerMgmtPhasesTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.8.1.2,ACS8000-MIB::acsPowerMgmtPhasesTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.26.2.5.8.1.3,ACS8000-MIB::acsPowerMgmtPhasesTablePhaseIndex,Integer32,read-only,,current,,phase index in the PDU.
.1.3.6.1.4.1.10418.26.2.5.8.1.4,ACS8000-MIB::acsPowerMgmtPhasesTablePhaseName,OCTET,read-only,,current,,phase name in the PDU.
.1.3.6.1.4.1.10418.26.2.5.8.1.5,ACS8000-MIB::acsPowerMgmtPhasesTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.26.2.5.8.1.6,ACS8000-MIB::acsPowerMgmtPhasesTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.8.1.7,ACS8000-MIB::acsPowerMgmtPhasesTableCurrentValue,Integer32,read-only,,current,,Actual value of current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.8,ACS8000-MIB::acsPowerMgmtPhasesTableCurrentMax,Integer32,read-only,,current,,Max detected value of current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.9,ACS8000-MIB::acsPowerMgmtPhasesTableCurrentMin,Integer32,read-only,,current,,Min detected value of current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.10,ACS8000-MIB::acsPowerMgmtPhasesTableCurrentAvg,Integer32,read-only,,current,,Average value for current sensor in this phase.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.11,ACS8000-MIB::acsPowerMgmtPhasesTableCurrentReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of current.
.1.3.6.1.4.1.10418.26.2.5.8.1.12,ACS8000-MIB::acsPowerMgmtPhasesTableVoltageType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of voltage values.
.1.3.6.1.4.1.10418.26.2.5.8.1.13,ACS8000-MIB::acsPowerMgmtPhasesTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.26.2.5.8.1.14,ACS8000-MIB::acsPowerMgmtPhasesTableVoltageMax,Integer32,read-only,,current,,Max detected value of voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.26.2.5.8.1.15,ACS8000-MIB::acsPowerMgmtPhasesTableVoltageMin,Integer32,read-only,,current,,Min detected value of voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.26.2.5.8.1.16,ACS8000-MIB::acsPowerMgmtPhasesTableVoltageAvg,Integer32,read-only,,current,,Average value for voltage sensor in this phase.( V )
.1.3.6.1.4.1.10418.26.2.5.8.1.17,ACS8000-MIB::acsPowerMgmtPhasesTableVoltageReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of voltage.
.1.3.6.1.4.1.10418.26.2.5.8.1.18,ACS8000-MIB::acsPowerMgmtPhasesTablePowerType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power consumption values.
.1.3.6.1.4.1.10418.26.2.5.8.1.19,ACS8000-MIB::acsPowerMgmtPhasesTablePowerValue,Integer32,read-only,,current,,Actual value of power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.20,ACS8000-MIB::acsPowerMgmtPhasesTablePowerMax,Integer32,read-only,,current,,Max detected value of power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.21,ACS8000-MIB::acsPowerMgmtPhasesTablePowerMin,Integer32,read-only,,current,,Min detected value of power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.22,ACS8000-MIB::acsPowerMgmtPhasesTablePowerAvg,Integer32,read-only,,current,,Average value for power consumption in this phase.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.8.1.23,ACS8000-MIB::acsPowerMgmtPhasesTablePowerReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power consumption.
.1.3.6.1.4.1.10418.26.2.5.8.1.24,ACS8000-MIB::acsPowerMgmtPhasesTablePowerFactorType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power factor values.
.1.3.6.1.4.1.10418.26.2.5.8.1.25,ACS8000-MIB::acsPowerMgmtPhasesTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.8.1.26,ACS8000-MIB::acsPowerMgmtPhasesTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.8.1.27,ACS8000-MIB::acsPowerMgmtPhasesTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.8.1.28,ACS8000-MIB::acsPowerMgmtPhasesTablePowerFactorAvg,Integer32,read-only,,current,,Average value for power factor in this phase.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.8.1.29,ACS8000-MIB::acsPowerMgmtPhasesTablePowerFactorReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power factor.
.1.3.6.1.4.1.10418.26.2.5.8.1.30,ACS8000-MIB::acsPowerMgmtPhasesTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the phase alarm status.
.1.3.6.1.4.1.10418.26.2.5.9,ACS8000-MIB::acsPowerMgmtBanksTable,,not-accessible,,current,,This table contains data monitoring of each detected bank.
.1.3.6.1.4.1.10418.26.2.5.9.1,ACS8000-MIB::acsPowerMgmtBanksTableEntry,,not-accessible,acsPowerMgmtBanksTablePortNumber:acsPowerMgmtBanksTablePduIndex:acsPowerMgmtBanksTableBankIndex,current,,each entry has the data monitoring about bank.
.1.3.6.1.4.1.10418.26.2.5.9.1.1,ACS8000-MIB::acsPowerMgmtBanksTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.9.1.2,ACS8000-MIB::acsPowerMgmtBanksTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.26.2.5.9.1.3,ACS8000-MIB::acsPowerMgmtBanksTableBankIndex,Integer32,read-only,,current,,Bank index in the PDU.
.1.3.6.1.4.1.10418.26.2.5.9.1.4,ACS8000-MIB::acsPowerMgmtBanksTableBankName,OCTET,read-only,,current,,Bank name in the PDU.
.1.3.6.1.4.1.10418.26.2.5.9.1.5,ACS8000-MIB::acsPowerMgmtBanksTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.26.2.5.9.1.6,ACS8000-MIB::acsPowerMgmtBanksTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.9.1.7,ACS8000-MIB::acsPowerMgmtBanksTableCurrentValue,Integer32,read-only,,current,,Actual value of current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.8,ACS8000-MIB::acsPowerMgmtBanksTableCurrentMax,Integer32,read-only,,current,,Max detected value of current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.9,ACS8000-MIB::acsPowerMgmtBanksTableCurrentMin,Integer32,read-only,,current,,Min detected value of current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.10,ACS8000-MIB::acsPowerMgmtBanksTableCurrentAvg,Integer32,read-only,,current,,Average value for current sensor in this bank.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.11,ACS8000-MIB::acsPowerMgmtBanksTableCurrentReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of current.
.1.3.6.1.4.1.10418.26.2.5.9.1.12,ACS8000-MIB::acsPowerMgmtBanksTableVoltageType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of voltage values.
.1.3.6.1.4.1.10418.26.2.5.9.1.13,ACS8000-MIB::acsPowerMgmtBanksTableVoltageValue,Integer32,read-only,,current,,Actual value of voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.26.2.5.9.1.14,ACS8000-MIB::acsPowerMgmtBanksTableVoltageMax,Integer32,read-only,,current,,Max detected value of voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.26.2.5.9.1.15,ACS8000-MIB::acsPowerMgmtBanksTableVoltageMin,Integer32,read-only,,current,,Min detected value of voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.26.2.5.9.1.16,ACS8000-MIB::acsPowerMgmtBanksTableVoltageAvg,Integer32,read-only,,current,,Average value for voltage sensor in this bank.( V )
.1.3.6.1.4.1.10418.26.2.5.9.1.17,ACS8000-MIB::acsPowerMgmtBanksTableVoltageReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of voltage.
.1.3.6.1.4.1.10418.26.2.5.9.1.18,ACS8000-MIB::acsPowerMgmtBanksTablePowerType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power consumption values.
.1.3.6.1.4.1.10418.26.2.5.9.1.19,ACS8000-MIB::acsPowerMgmtBanksTablePowerValue,Integer32,read-only,,current,,Actual value of power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.20,ACS8000-MIB::acsPowerMgmtBanksTablePowerMax,Integer32,read-only,,current,,Max detected value of power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.21,ACS8000-MIB::acsPowerMgmtBanksTablePowerMin,Integer32,read-only,,current,,Min detected value of power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.22,ACS8000-MIB::acsPowerMgmtBanksTablePowerAvg,Integer32,read-only,,current,,Average value for power consumption in this bank.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.9.1.23,ACS8000-MIB::acsPowerMgmtBanksTablePowerReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power consumption.
.1.3.6.1.4.1.10418.26.2.5.9.1.24,ACS8000-MIB::acsPowerMgmtBanksTablePowerFactorType,INTEGER,read-only,,current,none-sensor(0):estimated(1):read(2),Type of power factor values.
.1.3.6.1.4.1.10418.26.2.5.9.1.25,ACS8000-MIB::acsPowerMgmtBanksTablePowerFactorValue,Integer32,read-only,,current,,Actual value of power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.9.1.26,ACS8000-MIB::acsPowerMgmtBanksTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.9.1.27,ACS8000-MIB::acsPowerMgmtBanksTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.9.1.28,ACS8000-MIB::acsPowerMgmtBanksTablePowerFactorAvg,Integer32,read-only,,current,,Average value for power factor in this bank.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.9.1.29,ACS8000-MIB::acsPowerMgmtBanksTablePowerFactorReset,INTEGER,read-write,,current,no-action(1):reset(2),Reset max, min and avg values of power factor.
.1.3.6.1.4.1.10418.26.2.5.9.1.30,ACS8000-MIB::acsPowerMgmtBanksTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the bank alarm status.
.1.3.6.1.4.1.10418.26.2.5.10,ACS8000-MIB::acsPowerMgmtEnvMonTable,,not-accessible,,current,,This table contains data monitoring of each detected environmental sensor.
.1.3.6.1.4.1.10418.26.2.5.10.1,ACS8000-MIB::acsPowerMgmtEnvMonTableEntry,,not-accessible,acsPowerMgmtEnvMonTablePortNumber:acsPowerMgmtEnvMonTablePduIndex:acsPowerMgmtEnvMonTableIndex,current,,each entry has the data monitoring about environmental sensors.
.1.3.6.1.4.1.10418.26.2.5.10.1.1,ACS8000-MIB::acsPowerMgmtEnvMonTablePortNumber,Integer32,read-only,,current,,Number of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.10.1.2,ACS8000-MIB::acsPowerMgmtEnvMonTablePduIndex,Integer32,read-only,,current,,A PDU position in the chain.
.1.3.6.1.4.1.10418.26.2.5.10.1.3,ACS8000-MIB::acsPowerMgmtEnvMonTableIndex,Integer32,read-only,,current,,envmon sensor index.
.1.3.6.1.4.1.10418.26.2.5.10.1.4,ACS8000-MIB::acsPowerMgmtEnvMonTableName,OCTET,read-only,,current,,envmon sensor name.
.1.3.6.1.4.1.10418.26.2.5.10.1.5,ACS8000-MIB::acsPowerMgmtEnvMonTablePduId,OCTET,read-only,,current,,PDU identification.
.1.3.6.1.4.1.10418.26.2.5.10.1.6,ACS8000-MIB::acsPowerMgmtEnvMonTablePortName,OCTET,read-only,,current,,Name of serial port when the PDU is connected.
.1.3.6.1.4.1.10418.26.2.5.10.1.7,ACS8000-MIB::acsPowerMgmtEnvMonTableType,INTEGER,read-only,,current,temp-internal(1):temperature(2):humidity(3):air-flow(4):smoke(5):dry-contact(6):water-level(7):motion(8):unplugged(9):unknown(10):air-pressure(11):vibration(12):vibration-contact(13):leak(14):door-contact(15),The type of environmental monitor.
.1.3.6.1.4.1.10418.26.2.5.10.1.8,ACS8000-MIB::acsPowerMgmtEnvMonTableStatus,INTEGER,read-only,,current,normal(1):triggered(2):not-applicable(3),Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor, Door-Contact. For Door-Contact, normal(1) = closed, triggered(2) = opened.
.1.3.6.1.4.1.10418.26.2.5.10.1.9,ACS8000-MIB::acsPowerMgmtEnvMonTableValue,Integer32,read-only,,current,,Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
.1.3.6.1.4.1.10418.26.2.5.10.1.10,ACS8000-MIB::acsPowerMgmtEnvMonTableMaxValue,Integer32,read-only,,current,,Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu.
.1.3.6.1.4.1.10418.26.2.5.11,ACS8000-MIB::acsPowerMgmtOutElecMonTable,,not-accessible,,current,,This table contains the information about data monitoring of outlets.
.1.3.6.1.4.1.10418.26.2.5.11.1,ACS8000-MIB::acsPowerMgmtOutElecMonTableEntry,,not-accessible,acsPowerMgmtOutElecMonTablePortNumber:acsPowerMgmtOutElecMonTablePduNumber:acsPowerMgmtOutElecMonTableNumber,current,,each entry has the information about the outlet.
.1.3.6.1.4.1.10418.26.2.5.11.1.1,ACS8000-MIB::acsPowerMgmtOutElecMonTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.11.1.2,ACS8000-MIB::acsPowerMgmtOutElecMonTablePduNumber,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.11.1.3,ACS8000-MIB::acsPowerMgmtOutElecMonTableNumber,Integer32,read-only,,current,,Number of the outlet in the PDU.
.1.3.6.1.4.1.10418.26.2.5.11.1.4,ACS8000-MIB::acsPowerMgmtOutElecMonTableCurrentValue,Integer32,read-only,,current,,Actual value of outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.5,ACS8000-MIB::acsPowerMgmtOutElecMonTableCurrentMax,Integer32,read-only,,current,,Max detected value of outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.6,ACS8000-MIB::acsPowerMgmtOutElecMonTableCurrentMin,Integer32,read-only,,current,,Min detected value of outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.7,ACS8000-MIB::acsPowerMgmtOutElecMonTableCurrentAvg,Integer32,read-only,,current,,Average value for outlet current sensor.( A x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.8,ACS8000-MIB::acsPowerMgmtOutElecMonTableCurrentReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet current.
.1.3.6.1.4.1.10418.26.2.5.11.1.9,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerValue,Integer32,read-only,,current,,Actual value of outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.10,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerMax,Integer32,read-only,,current,,Max detected value of outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.11,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerMin,Integer32,read-only,,current,,Min detected value of outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.12,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerAvg,Integer32,read-only,,current,,Average value for outlet power comsumption sensor.( W x 10 )
.1.3.6.1.4.1.10418.26.2.5.11.1.13,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet power comsumption.
.1.3.6.1.4.1.10418.26.2.5.11.1.14,ACS8000-MIB::acsPowerMgmtOutElecMonTableVoltageValue,Integer32,read-only,,current,,Actual value of outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.26.2.5.11.1.15,ACS8000-MIB::acsPowerMgmtOutElecMonTableVoltageMax,Integer32,read-only,,current,,Max detected value of outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.26.2.5.11.1.16,ACS8000-MIB::acsPowerMgmtOutElecMonTableVoltageMin,Integer32,read-only,,current,,Min detected value of outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.26.2.5.11.1.17,ACS8000-MIB::acsPowerMgmtOutElecMonTableVoltageAvg,Integer32,read-only,,current,,Average value for outlet voltage sensor.( V )
.1.3.6.1.4.1.10418.26.2.5.11.1.18,ACS8000-MIB::acsPowerMgmtOutElecMonTableVoltageReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet voltage.
.1.3.6.1.4.1.10418.26.2.5.11.1.19,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerFactorValue,Integer32,read-only,,current,,Actual value of outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.11.1.20,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerFactorMax,Integer32,read-only,,current,,Max detected value of outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.11.1.21,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerFactorMin,Integer32,read-only,,current,,Min detected value of outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.11.1.22,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerFactorAvg,Integer32,read-only,,current,,Average value for outlet power-factor sensor.( PF x 100 )
.1.3.6.1.4.1.10418.26.2.5.11.1.23,ACS8000-MIB::acsPowerMgmtOutElecMonTablePowerFactorReset,INTEGER,read-write,,current,noAction(1):reset(2),Reset max, min and avertage values of outlet power-factor.
.1.3.6.1.4.1.10418.26.2.5.11.1.24,ACS8000-MIB::acsPowerMgmtOutElecMonTableAlarm,INTEGER,read-only,,current,normal(1):blow-fuse(2):hw-ocp(3):high-critical(4):high-warning(5):low-warning(6):low-critical(7),Show the outlet alarm status.
.1.3.6.1.4.1.10418.26.2.5.12,ACS8000-MIB::acsPowerMgmtUPSTable,,not-accessible,,current,,This table contains the list of detected UPSs.
.1.3.6.1.4.1.10418.26.2.5.12.1,ACS8000-MIB::acsPowerMgmtUPSTableEntry,,not-accessible,acsPowerMgmtUPSTablePortNumber:acsPowerMgmtUPSTableUpsIndex,current,,Each entry has the information about the UPS.
.1.3.6.1.4.1.10418.26.2.5.12.1.1,ACS8000-MIB::acsPowerMgmtUPSTablePortNumber,Integer32,read-only,,current,,Number of serial port when the UPS is connected.
.1.3.6.1.4.1.10418.26.2.5.12.1.2,ACS8000-MIB::acsPowerMgmtUPSTableUpsIndex,Integer32,read-only,,current,,A UPS position in the chain.
.1.3.6.1.4.1.10418.26.2.5.12.1.3,ACS8000-MIB::acsPowerMgmtUPSTableUpsId,OCTET,read-only,,current,,UPS identification.
.1.3.6.1.4.1.10418.26.2.5.12.1.4,ACS8000-MIB::acsPowerMgmtUPSTablePortName,OCTET,read-only,,current,,Name of serial port or IP address if network device
.1.3.6.1.4.1.10418.26.2.5.12.1.5,ACS8000-MIB::acsPowerMgmtUPSTableModel,OCTET,read-only,,current,,Model of the UPS.
.1.3.6.1.4.1.10418.26.2.5.12.1.6,ACS8000-MIB::acsPowerMgmtUPSTableVendor,OCTET,read-only,,current,,Vendor of the UPS.
.1.3.6.1.4.1.10418.26.2.5.12.1.7,ACS8000-MIB::acsPowerMgmtUPSTableFirmwareVersion,OCTET,read-only,,current,,Version of the UPS firmware.
.1.3.6.1.4.1.10418.26.2.5.12.1.8,ACS8000-MIB::acsPowerMgmtUPSTableAgentFirmwareVersion,OCTET,read-only,,current,,Firmware version of the agent card.
.1.3.6.1.4.1.10418.26.2.5.12.1.9,ACS8000-MIB::acsPowerMgmtUPSTableSystemStatus,OCTET,read-only,,current,,System Status of the UPS.
.1.3.6.1.4.1.10418.26.2.5.12.1.10,ACS8000-MIB::acsPowerMgmtUPSTableInputBlackOutCount,Integer32,read-only,,current,,The number of occurrences, since the last reset, where the input was not qualified to provide power to the system.
.1.3.6.1.4.1.10418.26.2.5.12.1.11,ACS8000-MIB::acsPowerMgmtUPSTableInputBrownOutCount,Integer32,read-only,,current,,The number of occurrences, since the last reset, where the system input voltage has fallen below a pre-determined threshold for a specified amount of time.
.1.3.6.1.4.1.10418.26.2.5.12.1.12,ACS8000-MIB::acsPowerMgmtUPSTableInletAirTemperature,OCTET,read-only,,current,,Temperature of the inlet air.
.1.3.6.1.4.1.10418.26.2.5.12.1.13,ACS8000-MIB::acsPowerMgmtUPSTableNumberOutletGroups,Integer32,read-only,,current,,The number of Outlet Groups on this UPS
.1.3.6.1.4.1.10418.26.2.5.12.1.14,ACS8000-MIB::acsPowerMgmtUPSTableUPSSerialNumber,OCTET,read-only,,current,,System serial number.
.1.3.6.1.4.1.10418.26.2.5.12.1.15,ACS8000-MIB::acsPowerMgmtUPSTableUPSManufactureDate,OCTET,read-only,,current,,Manufacturing date of the system.
.1.3.6.1.4.1.10418.26.2.5.12.1.16,ACS8000-MIB::acsPowerMgmtUPSTableAutoRestartDelay,Integer32,read-write,,current,,If power is lost, the control will delay this amount of  time after power is restored before restarting the unit.
.1.3.6.1.4.1.10418.26.2.5.12.1.17,ACS8000-MIB::acsPowerMgmtUPSTableAutoRestartControl,INTEGER,read-write,,current,disabled(1):enabled(2),When set to enabled, the UPS will automatically restart the load when utility power is restored after a battery discharge.
.1.3.6.1.4.1.10418.26.2.5.12.1.18,ACS8000-MIB::acsPowerMgmtUPSTableAudibleAlarmControl,INTEGER,read-write,,current,off(1):on(2),Audible alarm control.
.1.3.6.1.4.1.10418.26.2.5.12.1.19,ACS8000-MIB::acsPowerMgmtUPSTableSilenceAlarm,INTEGER,read-write,,current,noAction(0):silenceAlarm(1),Silence audible alarm.
.1.3.6.1.4.1.10418.26.2.5.12.1.20,ACS8000-MIB::acsPowerMgmtUPSTableInverterState,OCTET,read-only,,current,,Inverter on/off state.
.1.3.6.1.4.1.10418.26.2.5.12.1.21,ACS8000-MIB::acsPowerMgmtUPSTableDCConverterStatus,OCTET,read-only,,current,,The operating state of the dc converter.
.1.3.6.1.4.1.10418.26.2.5.12.1.22,ACS8000-MIB::acsPowerMgmtUPSTableShutdownReason,OCTET,read-only,,current,,The reason for the most recent shutdown.
.1.3.6.1.4.1.10418.26.2.5.12.1.23,ACS8000-MIB::acsPowerMgmtUPSTableUPSTopology,OCTET,read-only,,current,,UPS Topology.
.1.3.6.1.4.1.10418.26.2.5.12.1.24,ACS8000-MIB::acsPowerMgmtUPSTableBypassInverterInputConfig,OCTET,read-only,,current,,Input source configuration for the bypass and inverter.
.1.3.6.1.4.1.10418.26.2.5.13,ACS8000-MIB::acsPowerMgmtUPSInputTable,,not-accessible,,current,,This table contains the information about UPS inputs.
.1.3.6.1.4.1.10418.26.2.5.13.1,ACS8000-MIB::acsPowerMgmtUPSInputTableEntry,,not-accessible,acsPowerMgmtUPSInputTablePortNumber:acsPowerMgmtUPSInputTableUpsIndex,current,,each entry has the information about the UPS inputs.
.1.3.6.1.4.1.10418.26.2.5.13.1.1,ACS8000-MIB::acsPowerMgmtUPSInputTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.13.1.2,ACS8000-MIB::acsPowerMgmtUPSInputTableUpsIndex,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.13.1.3,ACS8000-MIB::acsPowerMgmtUPSInputTableFrequency,OCTET,read-only,,current,,Input Frequency.
.1.3.6.1.4.1.10418.26.2.5.13.1.4,ACS8000-MIB::acsPowerMgmtUPSInputTableRMSVoltageL1N,OCTET,read-only,,current,,RMS Voltage L1-N.
.1.3.6.1.4.1.10418.26.2.5.13.1.5,ACS8000-MIB::acsPowerMgmtUPSInputTableRMSVoltageL1L2,OCTET,read-only,,current,,RMS Voltage L1L2.
.1.3.6.1.4.1.10418.26.2.5.13.1.6,ACS8000-MIB::acsPowerMgmtUPSInputTableRMSVoltageL2N,OCTET,read-only,,current,,RMS Voltage L2N.
.1.3.6.1.4.1.10418.26.2.5.13.1.7,ACS8000-MIB::acsPowerMgmtUPSInputTableRMSCurrentL1,OCTET,read-only,,current,,RMS Current for L1.
.1.3.6.1.4.1.10418.26.2.5.13.1.8,ACS8000-MIB::acsPowerMgmtUPSInputTableRMSCurrentL2,OCTET,read-only,,current,,RMS Current for L2.
.1.3.6.1.4.1.10418.26.2.5.13.1.9,ACS8000-MIB::acsPowerMgmtUPSInputTableMaxVoltageL1N,OCTET,read-only,,current,,Input Max Voltage measurement for Line L1-N since the last reset.
.1.3.6.1.4.1.10418.26.2.5.13.1.10,ACS8000-MIB::acsPowerMgmtUPSInputTableMinVoltageL1N,OCTET,read-only,,current,,Input Min Voltage measurement for Line L1-N since the last reset.
.1.3.6.1.4.1.10418.26.2.5.13.1.11,ACS8000-MIB::acsPowerMgmtUPSInputTableMaxVoltageL2N,OCTET,read-only,,current,,Input Max Voltage measurement for Line L2-N since the last reset.
.1.3.6.1.4.1.10418.26.2.5.13.1.12,ACS8000-MIB::acsPowerMgmtUPSInputTableMinVoltageL2N,OCTET,read-only,,current,,Input Min Voltage measurement for Line L1-N since the last reset.
.1.3.6.1.4.1.10418.26.2.5.13.1.13,ACS8000-MIB::acsPowerMgmtUPSInputTableNominalVoltage,OCTET,read-only,,current,,Input nominal voltage.
.1.3.6.1.4.1.10418.26.2.5.13.1.14,ACS8000-MIB::acsPowerMgmtUPSInputTableNominalFrequency,OCTET,read-only,,current,,Input nominal frequency.
.1.3.6.1.4.1.10418.26.2.5.13.1.15,ACS8000-MIB::acsPowerMgmtUPSInputTableNominalCurrent,OCTET,read-only,,current,,Input nominal current.
.1.3.6.1.4.1.10418.26.2.5.14,ACS8000-MIB::acsPowerMgmtUPSBypassTable,,not-accessible,,current,,This table contains the information about UPS bypass.
.1.3.6.1.4.1.10418.26.2.5.14.1,ACS8000-MIB::acsPowerMgmtUPSBypassTableEntry,,not-accessible,acsPowerMgmtUPSBypassTablePortNumber:acsPowerMgmtUPSBypassTableUpsIndex,current,,each entry has the information about the UPS bypass.
.1.3.6.1.4.1.10418.26.2.5.14.1.1,ACS8000-MIB::acsPowerMgmtUPSBypassTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.14.1.2,ACS8000-MIB::acsPowerMgmtUPSBypassTableUpsIndex,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.14.1.3,ACS8000-MIB::acsPowerMgmtUPSBypassTableRMSVoltageL1N,OCTET,read-only,,current,,RMS Voltage L1N.
.1.3.6.1.4.1.10418.26.2.5.14.1.4,ACS8000-MIB::acsPowerMgmtUPSBypassTableRMSVoltageL1L2,OCTET,read-only,,current,,RMS Voltage L1L2.
.1.3.6.1.4.1.10418.26.2.5.14.1.5,ACS8000-MIB::acsPowerMgmtUPSBypassTableRMSVoltageL2N,OCTET,read-only,,current,,RMS Voltage L2N.
.1.3.6.1.4.1.10418.26.2.5.14.1.6,ACS8000-MIB::acsPowerMgmtUPSBypassTableRMSCurrent,OCTET,read-only,,current,,RMS Current.
.1.3.6.1.4.1.10418.26.2.5.14.1.7,ACS8000-MIB::acsPowerMgmtUPSBypassTableRMSCurrentL2,OCTET,read-only,,current,,RMS Current.
.1.3.6.1.4.1.10418.26.2.5.14.1.8,ACS8000-MIB::acsPowerMgmtUPSBypassTableInputFrequency,OCTET,read-only,,current,,Bypass Input Frequency.
.1.3.6.1.4.1.10418.26.2.5.14.1.9,ACS8000-MIB::acsPowerMgmtUPSBypassTableNominalVoltage,OCTET,read-only,,current,,Bypass Nominal Voltage.
.1.3.6.1.4.1.10418.26.2.5.15,ACS8000-MIB::acsPowerMgmtUPSBatteryTable,,not-accessible,,current,,This table contains the information about UPS battery.
.1.3.6.1.4.1.10418.26.2.5.15.1,ACS8000-MIB::acsPowerMgmtUPSBatteryTableEntry,,not-accessible,acsPowerMgmtUPSBatteryTablePortNumber:acsPowerMgmtUPSBatteryTableUpsIndex,current,,each entry has the information about the UPS bypass.
.1.3.6.1.4.1.10418.26.2.5.15.1.1,ACS8000-MIB::acsPowerMgmtUPSBatteryTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.15.1.2,ACS8000-MIB::acsPowerMgmtUPSBatteryTableUpsIndex,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.15.1.3,ACS8000-MIB::acsPowerMgmtUPSBatteryTableDCBusVoltage,OCTET,read-only,,current,,DC Bus Voltage
.1.3.6.1.4.1.10418.26.2.5.15.1.4,ACS8000-MIB::acsPowerMgmtUPSBatteryTableTimeRemaining,OCTET,read-only,,current,,The calculated available time on battery.
.1.3.6.1.4.1.10418.26.2.5.15.1.5,ACS8000-MIB::acsPowerMgmtUPSBatteryTablePercentageCharge,OCTET,read-only,,current,,Battery Percentage Charge.
.1.3.6.1.4.1.10418.26.2.5.15.1.6,ACS8000-MIB::acsPowerMgmtUPSBatteryTableChargeStatus,OCTET,read-only,,current,,Battery Charge Status.
.1.3.6.1.4.1.10418.26.2.5.15.1.7,ACS8000-MIB::acsPowerMgmtUPSBatteryTableLowBatteryWarningTime,INTEGER,read-write,,current,,When battery time remaining falls to, or below, this value (minutes) the low battery alarm is activated.
.1.3.6.1.4.1.10418.26.2.5.15.1.8,ACS8000-MIB::acsPowerMgmtUPSBatteryTableTestResult,OCTET,read-only,,current,,The outcome of the previous battery test.
.1.3.6.1.4.1.10418.26.2.5.15.1.9,ACS8000-MIB::acsPowerMgmtUPSBatteryTableDCBusNominalVoltage,OCTET,read-only,,current,,Battery DC Bus Nominal Voltage.
.1.3.6.1.4.1.10418.26.2.5.15.1.10,ACS8000-MIB::acsPowerMgmtUPSBatteryTableNominalBatteryCapacity,OCTET,read-only,,current,,Nominal Battery Capacity.
.1.3.6.1.4.1.10418.26.2.5.15.1.11,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryFloatVoltage,OCTET,read-only,,current,,Battery Float Voltage.
.1.3.6.1.4.1.10418.26.2.5.15.1.12,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryCabinetType,OCTET,read-only,,current,,Battery Cabinet Type.
.1.3.6.1.4.1.10418.26.2.5.15.1.13,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryNumberOfEBC,OCTET,read-only,,current,,Number of Extended Battery Cabinets installed.
.1.3.6.1.4.1.10418.26.2.5.15.1.14,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryRating,OCTET,read-only,,current,,Battery Rating.
.1.3.6.1.4.1.10418.26.2.5.15.1.15,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryDischargeTime,OCTET,read-only,,current,,Time on battery operation for this discharge
.1.3.6.1.4.1.10418.26.2.5.15.1.16,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryChargeCompensating,OCTET,read-only,,current,,Battery charge algorithm changed due to battery temperature.
.1.3.6.1.4.1.10418.26.2.5.15.1.17,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryChargerState,OCTET,read-only,,current,,Battery charger state.
.1.3.6.1.4.1.10418.26.2.5.15.1.18,ACS8000-MIB::acsPowerMgmtUPSBatteryTableStartBatteryTest,INTEGER,read-write,,current,noAction(1):start(2),Command to initate a manual battery test.
.1.3.6.1.4.1.10418.26.2.5.15.1.19,ACS8000-MIB::acsPowerMgmtUPSBatteryTableBatteryStatus,OCTET,read-only,,current,,Battery Status.
.1.3.6.1.4.1.10418.26.2.5.16,ACS8000-MIB::acsPowerMgmtUPSOutputTable,,not-accessible,,current,,This table contains the information about UPS output.
.1.3.6.1.4.1.10418.26.2.5.16.1,ACS8000-MIB::acsPowerMgmtUPSOutputTableEntry,,not-accessible,acsPowerMgmtUPSOutputTablePortNumber:acsPowerMgmtUPSOutputTableUpsIndex,current,,Each entry has the information about the UPS output.
.1.3.6.1.4.1.10418.26.2.5.16.1.1,ACS8000-MIB::acsPowerMgmtUPSOutputTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.16.1.2,ACS8000-MIB::acsPowerMgmtUPSOutputTableUpsIndex,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.16.1.3,ACS8000-MIB::acsPowerMgmtUPSOutputTableApparentPower,OCTET,read-only,,current,,DC Bus Voltage
.1.3.6.1.4.1.10418.26.2.5.16.1.4,ACS8000-MIB::acsPowerMgmtUPSOutputTableFrequency,OCTET,read-only,,current,,Output frequency.
.1.3.6.1.4.1.10418.26.2.5.16.1.5,ACS8000-MIB::acsPowerMgmtUPSOutputTablePercentPower,OCTET,read-only,,current,,The system output power as a percentage of the rated capacity.
.1.3.6.1.4.1.10418.26.2.5.16.1.6,ACS8000-MIB::acsPowerMgmtUPSOutputTablePercentPowerL1,OCTET,read-only,,current,,The system output power on line L1 as a percentage of the rated capacity.
.1.3.6.1.4.1.10418.26.2.5.16.1.7,ACS8000-MIB::acsPowerMgmtUPSOutputTablePercentPowerL2,OCTET,read-only,,current,,The system output power on line L2 as a percentage of the rated capacity.
.1.3.6.1.4.1.10418.26.2.5.16.1.8,ACS8000-MIB::acsPowerMgmtUPSOutputTablePower,OCTET,read-only,,current,,The sum total power of all system output phases.
.1.3.6.1.4.1.10418.26.2.5.16.1.9,ACS8000-MIB::acsPowerMgmtUPSOutputTableRMSCurrentL1,OCTET,read-only,,current,,System output RMS current for line L1.
.1.3.6.1.4.1.10418.26.2.5.16.1.10,ACS8000-MIB::acsPowerMgmtUPSOutputTableRMSCurrentL2,OCTET,read-only,,current,,System output RMS current for line L2.
.1.3.6.1.4.1.10418.26.2.5.16.1.11,ACS8000-MIB::acsPowerMgmtUPSOutputTableRMSVoltageL1N,OCTET,read-only,,current,,The system output RMS voltage.
.1.3.6.1.4.1.10418.26.2.5.16.1.12,ACS8000-MIB::acsPowerMgmtUPSOutputTableRMSVoltageL2N,OCTET,read-only,,current,,The system output RMS voltage.
.1.3.6.1.4.1.10418.26.2.5.16.1.13,ACS8000-MIB::acsPowerMgmtUPSOutputTableRMSVoltageL1L2,OCTET,read-only,,current,,The system output RMS voltage.
.1.3.6.1.4.1.10418.26.2.5.16.1.14,ACS8000-MIB::acsPowerMgmtUPSOutputOffDelay,INTEGER,read-write,,current,,Turns the UPS output off after the number of seconds specified. When a value is written to this object the output will be turned off after the specified time has elapsed and the output will remain off.
.1.3.6.1.4.1.10418.26.2.5.16.1.15,ACS8000-MIB::acsPowerMgmtUPSOutputOnDelay,INTEGER,read-write,,current,,Turns the UPS output on after the number of seconds specified. When a value is written to this object the output will be turned on after the specified time has elapsed.
.1.3.6.1.4.1.10418.26.2.5.16.1.16,ACS8000-MIB::acsPowerMgmtUPSOutputCycleDelay,INTEGER,read-write,,current,,Turns the UPS off and then back on after the number of seconds specified. When a value is written to this object the output will turned off immediately and then turned back on after the specified time has elapsed.
.1.3.6.1.4.1.10418.26.2.5.16.1.17,ACS8000-MIB::acsPowerMgmtUPSOutputTableMaxVoltageL1,OCTET,read-only,,current,,The maximum system output voltage measurement for line 1 since the last reset.
.1.3.6.1.4.1.10418.26.2.5.16.1.18,ACS8000-MIB::acsPowerMgmtUPSOutputTableMinVoltageL1,OCTET,read-only,,current,,The minimum system output voltage measurement for line 1 since the last reset.
.1.3.6.1.4.1.10418.26.2.5.16.1.19,ACS8000-MIB::acsPowerMgmtUPSOutputTableMaxVoltageL2,OCTET,read-only,,current,,The maximum system output voltage measurement for line 21 since the last reset.
.1.3.6.1.4.1.10418.26.2.5.16.1.20,ACS8000-MIB::acsPowerMgmtUPSOutputTableMinVoltageL2,OCTET,read-only,,current,,The minimum system output voltage measurement for line 2 since the last reset.
.1.3.6.1.4.1.10418.26.2.5.16.1.21,ACS8000-MIB::acsPowerMgmtUPSOutputTableNominalVoltage,OCTET,read-only,,current,,The nominal (or rated) system output voltage.
.1.3.6.1.4.1.10418.26.2.5.16.1.22,ACS8000-MIB::acsPowerMgmtUPSOutputTablePowerNominalFrequency,OCTET,read-only,,current,,The nominal (or rated) system output frequency.
.1.3.6.1.4.1.10418.26.2.5.16.1.23,ACS8000-MIB::acsPowerMgmtUPSOutputTablePowerApparentPowerRating,OCTET,read-only,,current,,Output apparent power rating.
.1.3.6.1.4.1.10418.26.2.5.16.1.24,ACS8000-MIB::acsPowerMgmtUPSOutputTablePowerNominalPowerFactor,OCTET,read-only,,current,,The nominal (or rated) system power factor.
.1.3.6.1.4.1.10418.26.2.5.16.1.25,ACS8000-MIB::acsPowerMgmtUPSOutputTablePowerPowerFactorCorrection,OCTET,read-only,,current,,The state of the power factor correction circuitry of the system.
.1.3.6.1.4.1.10418.26.2.5.16.1.26,ACS8000-MIB::acsPowerMgmtUPSOutputTablePowerL1,OCTET,read-only,,current,,The system output power on line 1.
.1.3.6.1.4.1.10418.26.2.5.16.1.27,ACS8000-MIB::acsPowerMgmtUPSOutputTablePowerL2,OCTET,read-only,,current,,The system output power on line 2.
.1.3.6.1.4.1.10418.26.2.5.16.1.28,ACS8000-MIB::acsPowerMgmtUPSOutputTableApparentPowerL1,OCTET,read-only,,current,,The system output apparent power on line 1.
.1.3.6.1.4.1.10418.26.2.5.16.1.29,ACS8000-MIB::acsPowerMgmtUPSOutputTableApparentPowerL2,OCTET,read-only,,current,,The system output apparent power on line 2.
.1.3.6.1.4.1.10418.26.2.5.17,ACS8000-MIB::acsPowerMgmtUPSEcoModeTable,,not-accessible,,current,,This table contains the information about UPS ECO Mode.
.1.3.6.1.4.1.10418.26.2.5.17.1,ACS8000-MIB::acsPowerMgmtUPSEcoModeTableEntry,,not-accessible,acsPowerMgmtUPSBypassTablePortNumber:acsPowerMgmtUPSBypassTableUpsIndex,current,,each entry has the information about the UPS ECO Mode.
.1.3.6.1.4.1.10418.26.2.5.17.1.1,ACS8000-MIB::acsPowerMgmtUPSEcoModeTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.17.1.2,ACS8000-MIB::acsPowerMgmtUPSEcoModeTableUpsIndex,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.17.1.3,ACS8000-MIB::acsPowerMgmtUPSEcoModeTableStatus,OCTET,read-only,,current,,Current ECO Mode Status.
.1.3.6.1.4.1.10418.26.2.5.17.1.4,ACS8000-MIB::acsPowerMgmtUPSEcoModeTableStateControl,INTEGER,read-write,,current,noAction(1):enable(2):disable(3),Enable or disable ECO mode.
.1.3.6.1.4.1.10418.26.2.5.18,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTable,,not-accessible,,current,,This table contains the UPS Outlet Group Information.
.1.3.6.1.4.1.10418.26.2.5.18.1,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTableEntry,,not-accessible,acsPowerMgmtUPSOutletGroupTablePortNumber:acsPowerMgmtUPSOutletGroupTableUpsIndex:acsPowerMgmtUPSOutletGroupTableNumber,current,,Each entry has the UPS outlet group information.
.1.3.6.1.4.1.10418.26.2.5.18.1.1,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTablePortNumber,Integer32,read-only,,current,,Serial Port number.
.1.3.6.1.4.1.10418.26.2.5.18.1.2,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTableUpsIndex,Integer32,read-only,,current,,Index.
.1.3.6.1.4.1.10418.26.2.5.18.1.3,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTableNumber,Integer32,read-only,,current,,Number of the outletgroup in the UPS.
.1.3.6.1.4.1.10418.26.2.5.18.1.4,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTableLabel,OCTET,read-only,,current,,User-defined label for the outlet group.
.1.3.6.1.4.1.10418.26.2.5.18.1.5,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTableState,OCTET,read-only,,current,,User-defined label for the outlet group.
.1.3.6.1.4.1.10418.26.2.5.18.1.6,ACS8000-MIB::acsPowerMgmtUPSOutletGroupTablePowerControl,INTEGER,read-write,,current,noAction(1):powerOn(2):powerOff(3):powerCycle(4),A set value of power(2-6) will send command to the UPS. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to UPS. powerOff(3) = when SET the power Off command is sent to UPS. powerCycle(4)=when SET the power cycle command is sent to UPS.
.1.3.6.1.4.1.10418.26.2.6,ACS8000-MIB::acsTrapObject,,,,,,
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
.1.3.6.1.6.3.1,SNMPv2-MIB::snmpMIB,,,,,,The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.1.1,SNMPv2-MIB::snmpMIBObjects,,,,,,
.1.3.6.1.6.3.1.1.4,SNMPv2-MIB::snmpTrap,,,,,,
.1.3.6.1.6.3.1.1.4.1,SNMPv2-MIB::snmpTrapOID,OBJECT,accessible-for-notify,,current,,The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.
.1.3.6.1.6.3.1.1.4.3,SNMPv2-MIB::snmpTrapEnterprise,OBJECT,accessible-for-notify,,current,,The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.
.1.3.6.1.6.3.1.1.5,SNMPv2-MIB::snmpTraps,,,,,,
.1.3.6.1.6.3.1.1.5.1,SNMPv2-MIB::coldStart,,,,,,A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
.1.3.6.1.6.3.1.1.5.2,SNMPv2-MIB::warmStart,,,,,,A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.1.5.3,IF-MIB::linkDown,,,,,,A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.4,IF-MIB::linkUp,,,,,,A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.5,SNMPv2-MIB::authenticationFailure,,,,,,An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
.1.3.6.1.6.3.1.1.6,SNMPv2-MIB::snmpSet,,,,,,
.1.3.6.1.6.3.1.1.6.1,SNMPv2-MIB::snmpSetSerialNo,INTEGER,read-write,,current,,An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.
.1.3.6.1.6.3.1.2,SNMPv2-MIB::snmpMIBConformance,,,,,,
.1.3.6.1.6.3.1.2.1,SNMPv2-MIB::snmpMIBCompliances,,,,,,
.1.3.6.1.6.3.1.2.1.2,SNMPv2-MIB::snmpBasicCompliance,,,,,,The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2.
.1.3.6.1.6.3.1.2.1.3,SNMPv2-MIB::snmpBasicComplianceRev2,,,,,,The compliance statement for SNMP entities which implement this MIB module.
.1.3.6.1.6.3.1.2.2,SNMPv2-MIB::snmpMIBGroups,,,,,,
.1.3.6.1.6.3.1.2.2.5,SNMPv2-MIB::snmpSetGroup,,,,,,A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation.
.1.3.6.1.6.3.1.2.2.6,SNMPv2-MIB::systemGroup,,,,,,The system group defines objects which are common to all managed systems.
.1.3.6.1.6.3.1.2.2.7,SNMPv2-MIB::snmpBasicNotificationsGroup,,,,,,The basic notifications implemented by an SNMP entity supporting command responder applications.
.1.3.6.1.6.3.1.2.2.8,SNMPv2-MIB::snmpGroup,,,,,,A collection of objects providing basic instrumentation and control of an SNMP entity.
.1.3.6.1.6.3.1.2.2.9,SNMPv2-MIB::snmpCommunityGroup,,,,,,A collection of objects providing basic instrumentation of a SNMP entity which supports community-based authentication.
.1.3.6.1.6.3.1.2.2.10,SNMPv2-MIB::snmpObsoleteGroup,,,,,,A collection of objects from RFC 1213 made obsolete by this MIB module.
.1.3.6.1.6.3.1.2.2.11,SNMPv2-MIB::snmpWarmStartNotificationGroup,,,,,,An additional notification for an SNMP entity supporting command responder applications, if it is able to reinitialize itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.2.2.12,SNMPv2-MIB::snmpNotificationGroup,,,,,,These objects are required for entities which support notification originator applications.
